Constructing nickel-iron oxyhydroxides integrated with iron oxides by microorganism corrosion for oxygen evolution.

Developing facile approaches for preparing efficient electrocatalysts is of significance to promote sustainable energy technologies. Here, we report a facile iron-oxidizing bacteria corrosion approach to construct a composite electrocatalyst of nickel­iron oxyhydroxides combined with iron oxides. The obtained electrocatalyst shows improved electrocatalytic activity and stability for oxygen evolution, with an overpotential of ∼230 mV to afford the current density of 10 mA cm−2. The incorporation of iron oxides produced by iron-oxidizing bacteria corrosion optimizes the electronic structure of nickel­iron oxyhydroxide electrodes, which accounts for the decreased free energy of oxygenate generation and the improvement of OER activity. This work demonstrates a natural bacterial corrosion approach for the facile preparation of efficient electrodes for water oxidation, which may provide interesting insights in the multidisciplinary integration of innovative nanomaterials and emerging energy technologies.

Highly Selective Electrocatalytic CO2 Conversion to Tailored Products through Precise Regulation of Hydrogenation and C-C Coupling.

The electrochemical reduction reaction of carbon dioxide (CO2RR) into valuable products offers notable economic benefits and contributes to environmental sustainability. However, precisely controlling the reaction pathways and selectively converting key intermediates pose considerable challenges. In this study, our theoretical calculations reveal that the active sites with different states of copper atoms (1-3-5-7-9) play a pivotal role in the adsorption behavior of the *CHO critical intermediate. This behavior dictates the subsequent hydrogenation and coupling steps, ultimately influencing the formation of the desired products. Consequently, we designed two model electrocatalysts comprising Cu single atoms and particles supported on CeO2. This design enables controlled *CHO intermediate transformation through either hydrogenation with *H or coupling with *CO, leading to a highly selective CO2RR. Notably, our selective control strategy tunes the Faradaic efficiency from 61.1% for ethylene (C2H4) to 61.2% for methane (CH4). Additionally, the catalyst demonstrated a high current density and remarkable stability, exceeding 500 h of operation. This work not only provides efficient catalysts for selective CO2RR but also offers valuable insights into tailoring surface chemistry and designing catalysts for precise control over catalytic processes to achieve targeted product generation in CO2RR technology.

Hydrogen Peroxide Spillover on Platinum-Iron Hybrid Electrocatalyst for Stable Oxygen Reduction.

Iron-nitrogen-carbon (Fe-N-C) catalysts, although the most active platinum-free option for the cathodic oxygen reduction reaction (ORR), suffer from poor durability due to the Fe leaching and consequent Fenton effect, limiting their practical application in low-temperature fuel cells. This work demonstrates an integrated catalyst of a platinum-iron (PtFe) alloy planted in an Fe-N-C matrix (PtFe/Fe-N-C) to address this challenge. This novel catalyst exhibits both high-efficiency activity and stability, as evidenced by its impressive half-wave potential (E1/2) of 0.93 V versus reversible hydrogen electrode (vs RHE) and minimal 7 mV decay even after 50,000 potential cycles. Remarkably, it exhibits a very low hydrogen peroxide (H2O2) yield (0.07%) at 0.6 V and maintains this performance with negligible change after 10,000 potential cycles. Fuel cells assembled with this cathode PtFe/Fe-N-C catalyst show exceptional durability, with only 8 mV voltage loss at 0.8 A cm-2 after 30,000 cycles and ignorable current degradation at a voltage of 0.6 V over 85 h. Comprehensive in situ experiments and theoretical calculations reveal that oxygen species spillover from Fe-N-C to PtFe alloy not only inhibits H2O2 production but also eliminates harmful oxygenated radicals. This work paves the way for the design of highly efficient and stable ORR catalysts and has significant implications for the development of next-generation fuel cells.

Element Diffusion Induced Carrier Transport Enhancement in High-Performance CZTSSe Self-Powered Photodetector.

Cu2ZnSn(S,Se)4 (CZTSSe) has attracted great interest in thin-film solar cells due to its excellent photoelectric performance in past decades, and recently is gradually expanding to the field of photodetectors. Here, the CZTSSe self-powered photodetector is prepared by using traditional photovoltaic device structure. Under zero bias, it exhibits the excellent performance with a maximum responsivity of 0.77 A W-1, a high detectivity of 8.78 × 1012 Jones, and a wide linear dynamic range of 103 dB. Very fast response speed with the rise/decay times of 0.576/1.792 µs, and ultra-high switching ratio of 3.54 × 105 are obtained. Comprehensive electrical and microstructure characterizations confirm that element diffusion among ITO, CdS, and CZTSSe layers not only optimizes band alignment of CdS/CZTSSe, but also suppresses the formation of interface defects. Such a suppression of interface defects and spike-like band alignment significantly inhibit carrier nonradiative recombination at interface and promote carrier transport capability. The low trap density in CZTSSe and low back contact barrier of CZTSSe/Mo could be responsible for the very fast response time of photodetector. This work definitely provides guidance for designing a high performance self-powered photodetector with high photoresponse, high switching ratio, fast response speed, and broad linear dynamic range.

In Situ Formation of SnSe2/SnSe Vertical Heterostructures toward Polarization Selectable Band Alignments.

2D van der Waals (vdW) layered semiconductor vertical heterostructures with controllable band alignment are highly desired for nanodevice applications including photodetection and photovoltaics. However, current 2D vdW heterostructures are mainly obtained via mechanical exfoliation and stacking process, intrinsically limiting the yield and reproducibility, hardly achieving large-area with specific orientation. Here, large-area vdW-epitaxial SnSe2/SnSe heterostructures are obtained by annealing layered SnSe. These in situ Raman analyses reveal the optimized annealing conditions for the phase transition of SnSe to SnSe2. The spherical aberration-corrected transmission electron microscopy investigations demonstrate that layered SnSe2 epitaxially forms on SnSe surface with atomically sharp interface and specific orientation. Optical characterizations and theoretical calculations reveal valley polarization of the heterostructures that originate from SnSe, suggesting a naturally adjustable band alignment between type-II and type-III, only relying on the polarization angle of incident lights. This work not only offers a unique and accessible approach to obtaining large-area SnSe2/SnSe heterostructures with new insight into the formation mechanism of vdW heterostructures, but also opens the intriguing optical applications based on valleytronic nanoheterostructures.

Optical properties of ferroic Fe2O(SeO3)2 and Fe2(SeO3)3·3H2O.

Ferroic compounds Fe2O(SeO3)2 (FSO) and Fe2(SeO3)3·3H2O (FSOH) prepared by the hydrothermal method are characterized and their optical properties are investigated by combining with first-principles calculations. The results show that (i) FSO is antiferromagnetic below ∼110 K and becomes ferromagnetic at elevated temperatures, while FSOH is antiferromagnetic at low temperatures probably due to a change in the spin state from Fe3+ (S = 5/2) to Fe2+ (S = 2); (ii) the optical bandgap is determined to be ∼2.83 eV for FSO and ∼2.15 eV for FSOH, consistent with the theoretical calculation; and (iii) the angle-resolved polarized Raman spectroscopy results of both crystals demonstrate the strong anisotropic light absorption and birefringence effects, and the unconventional symmetricity of some Raman modes is observed, which can be interpreted from the variation of Raman scattering elements. This work can provide not only an understanding of the structure and physical properties of iron selenites, but also a strategy for exploring the anomalous Raman behaviors in anisotropic crystals, facilitating the design and engineering of novel functional devices with low-symmetry ferroic materials.

Adjacent Copper Single Atoms Promote C-C Coupling in Electrochemical CO2 Reduction for the Efficient Conversion of Ethanol.

The electrochemical CO2 reduction reaction (CO2RR) using renewable electricity is one of the most promising strategies for reaching the goal of carbon neutrality. Multicarbonous (C2+) products have broad applications, and ethanol is a valuable chemical and fuel. Many Cu-based catalysts have been reported to be efficient for the electrocatalytic CO2RR to C2+ products, but they generally offer limited selectivity and current density toward ethanol. Herein, we proposed a silica-mediated hydrogen-bonded organic framework (HOF)-templated approach to preparing ultrahigh-density Cu single-atom catalysts (SACs) on thin-walled N-doped carbon nanotubes (TWN). The content of Cu in the catalysts prepared by this method could be up to 13.35 wt %. It was found that the catalysts showed outstanding performance for the electrochemical CO2RR to ethanol, and the Faradaic efficiency (FE) of ethanol increased with the increase in Cu-N3 site density. The FE of ethanol over the catalysts with 13.35 wt % Cu could reach ∼81.9% with a partial current density of 35.6 mA cm-2 using an H-type cell, which is the best result for electrochemical CO2RR to ethanol to date. In addition, the catalyst could be stably used for more than 25 h. Experimental and density functional theory (DFT) studies revealed that the adjacent Cu-N3 active sites (one Cu atom coordinates with three N) were the active sites for the reaction, and their high density was crucial for the high FE of ethanol because the adjacent Cu-N3 sites with a short distance could promote the C-C coupling synergistically.

In Situ Reconstruction NiO Octahedral Active Sites for Promoting Electrocatalytic Oxygen Evolution of Nickel Phosphate.

Electrochemical activation strategy is very effective to improve the intrinsic catalytic activity of metal phosphate toward the sluggish oxygen evolution reaction (OER) for water electrolysis. However, it is still challenging to operando trace the activated reconstruction and corresponding electrocatalytic dynamic mechanisms. Herein, a constant voltage activation strategy is adopted to in situ activate Ni2 P4 O12 , in which the break of NiONi bond and dissolution of PO4 3- groups could optimize the lattice oxygen, thus reconstructing an irreversible amorphous Ni(OH)2 layer with a thickness of 1.5-3.5 nm on the surface of Ni2 P4 O12 . The heterostructure electrocatalyst can afford an excellent OER activity in alkaline media with an overpotential of 216.5 mV at 27.0 mA cm-2 . Operando X-ray absorption fine structure spectroscopy analysis and density functional theory simulations indicate that the heterostructure follows a nonconcerted proton-electron transfer mechanism for OER. This activation strategy demonstrates universality and can be used to the surface reconstruction of other metal phosphates.

Origin of Cycle Performance in the Ag2O/TiO2 Heterostructure Photocatalyst.

In recent years, many studies on photocatalysis focused on improving efficiency. However, the cycle performance is also an important index for industrialization. Here, an Ag2O/TiO2 heterostructure photocatalyst is prepared for continuous photodegradation of methylene blue (MB) under visible light, and the samples after the first and fifth round reactions are recycled to study the microstructure evolution of the photocatalyst. The results show that the performance is obviously improved in the second round and remains stable in the following reaction round. Due to the charge transfer, Ag2O/TiO2 gradually changes to Ag2O@Ag-TiO2-x during the photocatalytic reaction. The resulting localized surface plasmon resonance effect and the change of the interface structure greatly increase the number of carriers and prolong the lifetime of carriers. Such variations of microstructures and photoelectric properties of the samples due to the charge transfer and redox reaction on the surface of the photocatalyst dominate the cycle performance.

Abnormal vibrational anisotropy and thermal properties of a two-dimensional GeAs semiconductor.

Anisotropy in a crystal structure plays a striking role in determining the optical, electrical and thermal properties of the condensed matter. Here, we investigated in-plane vibrational anisotropy in a two-dimensional (2D) van der Waals (vdW)-layered GeAs narrow-gap semiconductor by combining microstructural characterization and polarization Raman spectroscopy. Interestingly, not only the intensities but also the Raman shifts in all modes evolved periodically with different symmetries as the polarization angle changed continuously, which could be well-analyzed using the Raman tensors and further interpreted from the phonon dispersion relations. More importantly, the temperature-dependent Raman intensities of the Raman modes in the range from 83 K to 823 K gave a thermal-related uniform constant, based on which key parameters, including the thermal expansion coefficient, Grüneisen constant and quasi-particle lifetime, could be directly derived, which were in line with the calculated predictions. This investigation provides a comprehensive understanding of structure-dependent optical anisotropy in 2D vdW-layered GeAs and suggests a new idea for exploring the thermal properties of related materials using temperature-dependent Raman spectroscopy.

Deep defects limiting the conversion efficiency of Sb2Se3 thin-film solar cells.

Quasi-one-dimensional (Q1D) semiconductor antimony selenide (Sb2Se3) shows great potential in the photovoltaic field, but the photoelectric conversion efficiency (PCE) of Sb2Se3-based solar cells has shown no obvious breakthrough during the past several years, of which the intrinsic reasons are pending experimentally. Here, we prepare high-quality Q1D Sb2Se3 thin films via the vapor transport deposition technique. By investigating the bandedge electronic level structure and carrier relaxation/recombination dynamics, we find that (i) the optimized Se-rich growth conditions can highly improve the crystal quality of the Q1D Sb2Se3 thin films, the carrier lifetime of which is substantially increased up to ∼8.3 µs; (ii) the Se-rich growth conditions have advantages to annihilate the deep selenium vacancies VSei (i = 1 and 3 for non-equivalent Se atomic sites) but is not effective for the deep donor VSe2, which locates at ∼0.3 eV (300 K) below the conduction band and intrinsically limits the PCE value of devices below ∼7.63%. This work suggests that further optimizing the Se-rich conditions to technically eliminate this kind of deep defect is still essential for preparing high-performance Sb2Se3 film solar cells.

A Stress Self-Adaptive Structure to Suppress the Chemo-mechanical Degradation for High Rate and Ultralong Cycle Life Sodium Ion Batteries.

Transition-metal phosphides (TMPs) as typical conversion-type anode materials demonstrate extraordinary theoretical charge storage capacity for sodium ion batteries, but the unavoidable volume expansion and irreversible capacity loss upon cycling represent their long-standing limitations. Herein we report a stress self-adaptive structure with ultrafine FeP nanodots embedded in dense carbon microplates skeleton (FeP@CMS) via the spatial confinement of carbon quantum dots (CQDs). Such an architecture delivers a record high specific capacity (778 mAh g-1 at 0.05 A g-1 ) and ultra-long cycle stability (87.6 % capacity retention after 10 000 cycles at 20 A g-1 ), which outperform the state-of-the-art literature. We decode the fundamental reasons for this unprecedented performance, that such an architecture allows the spontaneous stress transfer from FeP nanodots to the surrounding carbon matrix, thus overcomes the intrinsic chemo-mechanical degradation of metal phosphides.

Metal-Organic Framework-Derived Graphene Mesh: a Robust Scaffold for Highly Exposed Fe-N4 Active Sites toward an Excellent Oxygen Reduction Catalyst in Acid Media.

This study demonstrates a special ultrathin N-doped graphene nanomesh (NGM) as a robust scaffold for highly exposed Fe-N4 active sites. Significantly, the pore sizes of the NGM can be elaborately regulated by adjusting the thermal exfoliation conditions to simultaneously disperse and anchor Fe-N4 moieties, ultimately leading to highly loaded Fe single-atom catalysts (SA-Fe-NGM) and a highly exposed morphology. The SA-Fe-NGM is found to deliver a superior oxygen reduction reaction (ORR) activity in acidic media (half-wave potential = 0.83 V vs RHE) and a high power density of 634 mW cm-2 in the H2/O2 fuel cell test. First-principles calculations further elucidate the possible catalytic mechanism for ORR based on the identified Fe-N4 active sites and the pore size distribution analysis. This work provides a novel strategy for constructing highly exposed transition metals and nitrogen co-doped carbon materials (M-N-C) catalysts for extended electrocatalytic and energy storage applications.

Carbon-Confined Indium Oxides for Efficient Carbon Dioxide Reduction in a Solid-State Electrolyte Flow Cell.

Developing robust electrocatalysts and advanced devices is important for electrochemical carbon dioxide (CO2 ) reduction toward the generation of valuable chemicals. We present herein a carbon-confined indium oxide electrocatalyst for stable and efficient CO2 reduction. The reductive corrosion of oxidative indium to the metallic state during electrolysis could be prevented by carbon protection, and the applied carbon layer also optimizes the reaction intermediate adsorption, which enables both high selectivity and activity for CO2 reduction. In a liquid-phase flow cell, the formate selectivity exceeds 90 % in a wide potential window from -0.8 V to -1.3 V vs. RHE. The continuous production of ca. 0.12 M pure formic acid solution is further demonstrated at a current density of 30 mA cm-2 in a solid-state electrolyte mediated reactor. This work provides significant concepts in the parallel development of electrocatalysts and devices for carbon-neutral technologies.

Scalable Molten Salt Synthesis of Platinum Alloys Planted in Metal-Nitrogen-Graphene for Efficient Oxygen Reduction.

Fuel cells are considered as a promising alternative to the existing traditional energy systems towards a sustainable future. Nevertheless, the synthesis of efficient and robust platinum (Pt) based catalysts remains a challenge for practical applications. In this work, we present a simple and scalable molten-salt synthesis method for producing a low-platinum (Pt) nanoalloy implanted in metal-nitrogen-graphene. The as-prepared low-Pt alloyed graphene exhibits a high oxygen reduction activity of 1.29 A mgPt -1 and excellent durability over 30 000 potential cycles. The catalyst nanoarchitecture of graphene encased Pt nanoalloy provides a robust capability against nanoparticle migration and corrosion due to a strong metal-support interaction. Similarly, advanced characterization and theoretical calculations show that the multiple active sites in platinum alloyed graphene synergistically account for the improved oxygen reduction. This work not only provides an efficient and robust low-Pt catalyst but also a facile design idea and scalable preparation technique for integrated catalysts to achieve more profound applications in fuel cells and beyond.

Single-Crystal Lattice Filling in Connected Spaces inside 3D Networks.

Connected vessel effects have been widely utilized from ancient times. It is quite interesting to know whether there are any special effects when single-crystal lattices fill the connected spaces inside 3D networks. In some single-crystal and 3D network pairs, there seems to exist a specific rule: when single-crystal lattices fill the connected spaces inside 3D networks, the front of the lattice in each channel is determined by the symmetrical center of the lattice structure. However, this needs to be validated by using various single-crystal lattice to fill the 3D networks with different compositions. Here we report a method to establish a gradient environment which can favor the formation of a micrometer-sized single crystal lattice across various 3D networks. The fronts of the filled lattices form the shapes which are the equilibrium shapes of the single crystals no matter what the single crystals or the 3D networks are, indicating the specific rule while the single-crystal lattices fill the 3D networks. The single crystals filled in the connected spaces inside 3D networks, which are functional materials, and had alternating properties, such as 4-fold higher electronic conductivity, which improve their performance in applications.

Ultrasensitive Sensing of Volatile Organic Compounds Using a Cu-Doped SnO2 -NiO p-n Heterostructure That Shows Significant Raman Enhancement*.

Surface enhanced Raman scattering (SERS) based on chemical mechanism (CM) attracts tremendous attention for great selectivity and stability. However, low enhancement factor (EF) limits its practical applications for trace detection. Here, a novel sponge-like Cu-doping SnO2 -NiO p-n semiconductor heterostructure (SnO2 -NiOx /Cu), was first created as a CM-based SERS substrate with a significant EF of 1.46×1010 . This remarkable EF was mainly attributed to the enhanced charge-separation efficacy of p-n heterojunction and charge transfer resonance resulted from Cu doping. Moreover, the porous structure enriched the probe molecules, resulting in further SERS signals magnification. By immobilizing CuPc as an inner-reference element, SnO2 -NiOx /Cu was developed as a SERS nose for selective recognition of multiple lung cancer related VOCs down to ppb level. The information of VOCs was recorded in a barcode, demonstrating practical potential of a desktop SERS device for biomarker screening.

Boosting Oxygen Reduction via Integrated Construction and Synergistic Catalysis of Porous Platinum Alloy and Defective Graphitic Carbon.

Integrated fabrication through the strong interaction between catalyst and carrier is crucial to realize efficient oxygen electrocatalysis for fuel cells. We report herein a porous Pt-rich alloy encapsulated by graphitic carbon via integration engineering, where a synergistic catalysis between ternary PtCuCo alloy and graphitic Co-N-C results in the optimized reaction pathway and improved oxygen reduction reaction (ORR) performance. The hybrid catalyst PtCuCo@Co-N-C delivers a mass activity of 1.14 A mgPt -1 at 0.9 V vs. RHE and a peak power density of 960 mW cm-2 in the full-cell assessment, outperforming commercial Pt/C catalyst (0.12 A mgPt -1 and 780 mW cm-2 ). Experimental results combined with theoretical simulations suggest that the mutual assistance between porous Pt alloy and Co-N-C accounts for the enhanced catalytic performance. Such integrated engineering concept is significant for strengthening the anti-corrosion capabilities and improving the ORR performance of Pt-based catalysts.

Ultrahigh-Detectivity Photodetectors with Van der Waals Epitaxial CdTe Single-Crystalline Films.

Van der Waals epitaxy (vdWE) is crucial for heteroepitaxy of covalence-bonded semiconductors on 2D layered materials because it is not subject to strict substrate requirements and the epitaxial materials can be transferred onto various substrates. However, planar film growth in covalence-bonded semiconductors remains a critical challenge of vdWE because of the extremely low surface energy of 2D materials. In this study, direct growth of wafer-scale single-crystalline cadmium telluride (CdTe) films is achieved on 2D layered transparent mica through molecular beam epitaxy. The vdWE CdTe films exhibit a flat surface resulting from the 2D growth regime, and high crystal quality as evidenced by a low full width at half maximum of 0.05° for 120 nm thick films. A perfect lattice fringe appears at the interfaces, implying a fully relaxed state of the epitaxial CdTe films correlated closely to the unique nature of vdWE. Moreover, the vdWE CdTe photodetectors demonstrate not only ultrasensitive optoelectronic response with optimal responsivity of 834 A W-1 and ultrahigh detectivity of 2.4 × 1014 Jones but also excellent mechanical flexibility and durability, indicating great potential in flexible and wearable devices.

Canscora lucidissima, a Chinese folk medicine, exerts anti-inflammatory activities by inhibiting the phosphorylation of ERK1/2 in LPS-activated macrophages.

BACKGROUND: Canscora lucidissima (Levl. & Vaniot) Hand.-Mazz. (C. lucidissima), mainly distributed in southern China, has been shown to be effective in the treatment of inflammatory diseases. However, the underlying mechanism of its anti-inflammatory effect is not fully understood. METHODS: In this study, we investigated the anti-inflammatory mechanism of ethanol extract of C. lucidissima (Cl-EE) in lipopolysaccharide (LPS)-induced inflammatory models. ELISA, real-time PCR, Western blot and luciferase reporter assay were used for the experiments in vitro, and ICR mouse endotoxemia model was used for in vivo test. RESULTS: Our data showed that Cl-EE reduced the production of NO by down-regulating the mRNA and protein expression of inducible nitric oxide synthase (iNOS) in LPS-activated RAW 264.7 cells. Meanwhile, it potently decreased other proinflammatory mediators, such as TNF-α, IL-6, MCP-1 and IL-1ß at the transcriptional and translational levels. Further study indicated that Cl-EE did not affect NF-κB signaling pathway but significantly suppressed the phosphorylation of ERK1/2, rather than JNK or p38. In a LPS-induced endotoxemia mouse model, a single intraperitoneal injection of Cl-EE (75-300 mg/kg) could lower circulatory TNF-α, IL-6 and MCP-1 levels. CONCLUSIONS: Collectively, our results indicated that Cl-EE suppressed the phosphorylation level of ERK1/2 thus reducing the transcription and translation of inflammatory genes, thereby exerted anti-inflammatory activity. This study reveals the anti-inflammatory mechanism of C. lucidissima and may provide an effective treatment option for a variety of inflammatory diseases.