Unlocking 4.9 V Quasi-Solid-State Lithium Metal Battery via Solvent Screening and Interfacial Manipulation.

Parlous structure integrity of the cathode and erratic interfacial microdynamics under high potential take responsibility for the degradation of solid-state lithium metal batteries (LMBs). Here, high-voltage LMBs have been operated by modulating the polymer electrolyte intrinsic structure through an intermediate dielectric constant solvent and further inducing the gradient solid-state electrolyte interphase. Benefiting from the chemical adsorption between trimethyl phosphate (TMP) and the cathode, the gradient interphase rich in LiPFxOy and LiF is induced, thereby ensuring the structural integrity and interface compatibility of the commercial LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode even at the 4.9 V cutoff voltage. Eventually, the specific capacity of NCM811|Li full cell based on TMP-modulated polymer electrolyte increased by 27.7% from 4.5 to 4.9 V. Such a universal screening method of electrolyte solvents and its derived electrode interfacial manipulation strategy opens fresh avenues for quasi-solid-state LMBs with high specific energy.

Charge Density-Regulated Microchannel-Based Electrochemiluminescence Sensor for Hydrogen Sulfide Detection with a Highly Efficient Accumulation Strategy.

The electrochemiluminescence (ECL) intensity can be regulated by ionic current passing through the microchannel, which broadened the regulation of the ECL sensors. But in the early reported sensors, the electrostatic repulsion and steric hindrance caused few targets to approach the interface of the microchannel driven by concentration difference, which reduced the detection efficiency and prolonged the detection period. In this study, different accumulation strategies, such as a positive electric field and different polarity electric fields, were designed to accumulate targets in the microchannel. The interaction of azide groups and hydrogen sulfide served as a research model. Hydrogen sulfide can react with the negatively charged azide groups in the microchannel surface to produce positively charged amino groups, decreasing the negative charge density of the microchannel and thus altering the ionic current and ECL intensity. The accumulation of hydrogen sulfide at the microchannel tip can increase the collision probability with azide groups to improve the detection efficiency, and the integration of accumulation and reaction can shorten the detection period to 28 min. The hydrogen sulfide concentration on the microchannel tip accumulated by applying different polarity electric fields was 22.3-fold higher than that accumulated by applying a positive electric field. The selected research model broadened the application range of a microchannel-based ECL sensor and confirmed the universality of the microchannel-based ECL sensor.

High-Sensitivity Homogeneous Detection of miRNA-155 Governed by DNA Walker-Regulated Surface DNA Density of Magnetic Electrochemiluminescence Nanoparticles.

Homogeneous electrochemiluminescence (ECL) has gained attention for its simplicity and stability. However, false positives due to solution background interference pose a challenge. To address this, magnetic ECL nanoparticles (Fe3O4@Ru@SiO2 NPs) were synthesized, offering easy modification, magnetic separation, and stable luminescence. These were utilized in an ECL sensor for miRNA-155 (miR-155) detection, with locked DNAzyme and substrate chain (mDNA) modified on their surface. The poor conductivity of long-chain DNA significantly impacts the conductivity and electron transfer capability of Fe3O4@Ru@SiO2 NPs, resulting in weaker ECL signals. Upon target presence, unlocked DNAzyme catalyzes mDNA cleavage, leading to shortened DNA chains and reduced density. In contrast, the presence of short-chain DNA has minimal impact on the conductivity and electron transfer capability of Fe3O4@Ru@SiO2 NPs. Simultaneously, the material surface's electronegativity decreases, weakening the electrostatic repulsion with the negatively charged electrode, resulting in the system detecting stronger ECL signals. This sensor enables homogeneous ECL detection while mitigating solution background interference through magnetic separation. Within a range of 100 fM to 10 nM, the sensor exhibits a linear relationship between ECL intensity and target concentration, with a 26.91 fM detection limit. It demonstrates high accuracy in clinical sample detection, holding significant potential for clinical diagnostics. Future integration with innovative detection strategies may further enhance sensitivity and specificity in biosensing applications.

Photoelectrochemical Sensor for H2S Based on a Lead-Free Perovskite/Metal-Organic Framework Composite.

Halide perovskites have emerged as a highly promising class of photoelectric materials. However, the application of lead-based perovskites has been hindered by their toxicity and relatively weak stability. In this work, a composite material comprising a lead-free perovskite cesium copper iodide (CsCu2I3) nanocrystal and a metal-organic framework (MOF-801) has been synthesized through an in situ growth approach. The resulting composite material, denoted as CsCu2I3/MOF-801, demonstrates outstanding stability and exceptional optoelectronic characteristics. MOF-801 may serve a dual role by acting as a protective barrier between CsCu2I3 nanocrystals and the external environment, as well as promoting the efficient transfer of photogenerated charge carriers, thereby mitigating their recombination. Consequently, CsCu2I3/MOF-801 demonstrates its utility by providing both stability and a notably high initial photocurrent. Leveraging the inherent reactivity between H2S and the composite material, which results in the formation of Cu2S and structural alteration, an exceptionally sensitive photoelectrochemical sensor for H2S detection has been designed. This sensor exhibits a linear detection range spanning from 0.005 to 100 µM with a remarkable detection limit of 1.67 nM, rendering it highly suitable for precise quantification of H2S in rat brains. This eco-friendly sensor significantly broadens the application horizon of perovskite materials and lays a robust foundation for their future commercialization.

Assessing the biodiversity of rhizosphere and endophytic fungi in Knoxia valerianoides under continuous cropping conditions.

BACKGROUND: Rhizosphere and endophytic fungi play important roles in plant health and crop productivity. However, their community dynamics during the continuous cropping of Knoxia valerianoides have rarely been reported. K. valerianoides is a perennial herb of the family Rubiaceae and has been used in herbal medicines for ages. Here, we used high-throughput sequencing technology Illumina MiSeq to study the structural and functional dynamics of the rhizosphere and endophytic fungi of K. valerianoides. RESULTS: The findings indicate that continuous planting has led to an increase in the richness and diversity of rhizosphere fungi, while concomitantly resulting in a decrease in the richness and diversity of root fungi. The diversity of endophytic fungal communities in roots was lower than that of the rhizosphere fungi. Ascomycota and Basidiomycota were the dominant phyla detected during the continuous cropping of K. valerianoides. In addition, we found that root rot directly affected the structure and diversity of fungal communities in the rhizosphere and the roots of K. valerianoides. Consequently, both the rhizosphere and endophyte fungal communities of root rot-infected plants showed higher richness than the healthy plants. The relative abundance of Fusarium in two and three years old root rot-infected plants was significantly higher than the control, indicating that continuous planting negatively affected the health of K. valerianoides plants. Decision Curve Analysis showed that soil pH, organic matter (OM), available K, total K, soil sucrase (S_SC), soil catalase (S_CAT), and soil cellulase (S_CL) were significantly related (p < 0.05) to the fungal community dynamics. CONCLUSIONS: The diversity of fungal species in the rhizosphere and root of K. valerianoides was reported for the first time. The fungal diversity of rhizosphere soil was higher than that of root endophytic fungi. The fungal diversity of root rot plants was higher than that of healthy plants. Soil pH, OM, available K, total K, S_CAT, S_SC, and S_CL were significantly related to the fungal diversity. The occurrence of root rot had an effect on the community structure and diversity of rhizosphere and root endophytic fungi.

The prevalence and genotype distribution of high-risk human papillomaviruses among women in Xianning, China.

BACKGROUND: The persistent infection of high-risk Human papillomavirus(HPV) is considered the main cause of cervical intraepithelial neoplasia and cervical cancer. But various cervical lesions caused by HPV infection can be properly prevented by timely vaccination. However, the distribution of HPV genotypes varies geographically. METHODS: Retrospective analysis of high-risk HPV prevalence of 16,150 women from 2020 to 2022 in xianning of China. HPV genotyping was performed using a PCR-RDB Kit that can detect 18 high-risk HPV genotypes recommended by China's National Medical Products Administration. The prevalence of 18 high-risk HPV genotypes and their relationship with cervical lesions as well as vaccine efficacy were analyzed. RESULTS: A total of 2431 women were confirmed to have different types of high-risk HPV infections. The overall positive rate reached 15.05%(2431/16,150). The most prevalent high-risk HPV genotypes were HPV52, 16, 58, 53, and 51. The prevalence of high-risk HPV reached peak at age ≤ 20(20.95%) and age ≥ 61(20.56%). The most prevalent high-risk HPV genotypes were HPV16, 58, 18, 33 and 52 in cervical cancer cases, HPV16, 52, 58, 33 and 18 in CIN2/3 cases, and HPV52, 58, 16, 53 and 18 in CIN1 cases, respectively. CONCLUSION: HPV16, 58 and 18 are the most dangerous and carcinogenic genotypes in xianning, China. Conducting epidemiological investigations on high-risk HPV has significant clinical value in guiding HPV vaccination work.

3D Aligned Nanofiber Scaffold Fabrication with Trench-Guided Electrospinning for Cardiac Tissue Engineering.

Constructing three-dimensional (3D) aligned nanofiber scaffolds is significant for the development of cardiac tissue engineering, which is promising in the field of drug discovery and disease mechanism study. However, the current nanofiber scaffold preparation strategy, which mainly includes manual assembly and hybrid 3D printing, faces the challenge of integrated fabrication of morphology-controllable nanofibers due to its cross-scale structural feature. In this research, a trench-guided electrospinning (ES) strategy was proposed to directly fabricate 3D aligned nanofiber scaffolds with alternative ES and a direct ink writing (DIW) process. The electric field effect of DIW poly(dimethylsiloxane) (PDMS) side walls on guiding whipping ES nanofibers was investigated to construct trench design rules. It was found that the width/height ratio of trenches greatly affected the nanofiber alignment, and the trench width/height ratio of 1.5 provided the nanofiber alignment degree over 60%. As a proof of principle, 3D nanofiber scaffolds with controllable porosity (60-80%) and alignment (30-60%) were fabricated. The effect of the scaffolds was verified by culturing human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs), which resulted in the uniform 3D distribution of aligned hiPSC-CMs with ∼1000 µm thickness. Therefore, this printing strategy shows great potential for the efficient engineered tissue construction.

Eu MOF-enhanced FeNCD nanozymes for fluorescence and highly sensitive colorimetric detection of tetracycline.

The constrained enzymatic activity and aggregation challenges encountered by small-sized nanozymes pose obstacles to their practical utility, necessitating a strategy to mitigate aggregation and boost enzymatic catalytic efficiency. In this work, a negatively charged Eu MOF was utilized as the encapsulation matrix, encapsulating the small-sized nanozymes FeNCDs into the Eu MOF to synthesize an FeNCDs@Eu MOF. The dispersibility of the encapsulated FeNCDs was increased, and owing to the negative charge of the FeNCDs@Eu MOF, electrostatic pre-concentration of the positively charged target molecule tetracycline (TC) was facilitated, thereby amplifying the enzymatic catalytic efficiency of the FeNCDs. The response of the FeNCDs to TC increased by nearly 6 times upon encapsulation. The TC detection limit (LOD) of the FeNCDs@Eu MOF-based sensor is as low as 11.63 nM. The incorporation of fluorescence detection expanded the linear range of the sensor, rendering it more suitable for practical sample detection.

Recovery of organic matters by activated sludge from municipal wastewater: Performance and characterization.

Municipal wastewater treatment processes consume a significant amount of energy and generate substantial carbon emissions. However, organic matters existing in municipal wastewater hold the potential as a valuable carbon source. Activated sludge has the potential to capture and recover the organic matters, thereby enriching carbon sources and facilitating subsequent sludge anaerobic digestion as well as in line with the concept of sustainable development. Based on above, this study investigated the enrichment and recovery characteristics and mechanisms of activated sludge adsorption on carbon sources in municipal wastewater, while optimizing the recovery conditions. The results indicated that insoluble organic matters, as well as a fraction of dissolved organic matters, can be effective recovered within approximately 40 min. Specifically, 74.1% of insoluble organic matters and 25.8% of soluble organic matters were successfully captured by the activated sludge, resulting in a 5.0% increase in sludge organic matter content. Moreover, activated sludge demonstrated remarkable recovery of particulate organic matters across various particle sizes, particularly larger particles (>5 µm) with high protein content. Notably, the dissolved biodegradable organics such as tryptophan and tyrosine protein-like substances according to 3D-EEM and lipids, proteins/amino sugars, and carbohydrates according to FT-ICR MS can be effectively recovered. Finally, the study revealed that the recovery of organic matters from the wastewater by activated sludge followed the pseudo-second-order kinetics model, with surface binding, hydrogen bonding and interparticle diffusion in sludge flocs as the primary adsorption mechanisms. This approach had abroad application prospects for improving the profitability of wastewater treatment plants.

Heterogeneous g-C3N4/polyaniline composites enhanced the conversion of organics into methane during anaerobic wastewater treatment.

In this study, g-C3N4/PANI was prepared by in situ oxidative polymerization. Graphite-phase carbon nitride (g-C3N4) with surface defects was deposited onto the surface of conductive polyaniline (PANI) to form a p-n heterojunction. This construction aimed to create an efficient heterogeneous catalyst, increasing the surface defect level and active sites of the composite, and augmenting its capability to capture and transfer extracellular electrons under anaerobic conditions. This addresses the challenge of low efficiency in direct interspecies electron transfer between bacteria and archaea during anaerobic digestion for methane production. The results showed that the prepared g-C3N4/PANI increased the CH4 yield and CH4 production rate by 82% and 96%, respectively. Notably, the conductivity and XPS test results showed that the ratio of g-C3N4 to PANI was 0.15, and the composite exhibited favorable conductivity, with a uniform distribution of pyrrolic nitrogen, pyridinic nitrogen, and graphitic nitrogen, each accounting for approximately 30%. Furthermore, g-C3N4/PANI effectively enhanced the metabolic efficiency of intermediate products such as acetate and butyrate. Analysis of the microbial community structure revealed that g-C3N4/PANI led to a significant increase in the abundance of hydrogenotrophic methanogen Methanolinea (from 48% to 64%) and enriched Clostridium (a rise of 1%) with direct interspecies electron transfer capability. Microbial community function analysis demonstrated that the addition of g-C3N4/PANI boosted the activities of key enzymes involved in anaerobic digestion, including phosphate transacetylase (PTA), phospho-butyryl transferase (PTB), and NAD-independent lactate dehydrogenase (NNLD), by 47%, 135%, and 153%, respectively. This acceleration in enzymatic activity promoted the metabolism of acetyl-CoA, butyryl-CoA, and pyruvate. Additionally, the function of ABC transporters was enhanced, thereby improving the efficiency of material and energy exchange among microorganisms.

Endoscopic lithotripsy combined with drug lithotripsy vs. drug lithotripsy for the treatment of phytobezoars: analysis of 165 cases.

AIM: To analyze efficacy of endoscopic lithotripsy combined with drug lithotripsy as compared with drug lithotripsy for the treatment of phytobezoars. METHODS: We collected and evaluated case records of 165 patients with phytobezoars from 2014 to 2023. And we analyzed demographic and clinical characteristics, imaging features, endoscopic features, complications of phytobezoars, and compared efficacy between endoscopic lithotripsy combined with drug lithotripsy (Group A) and drug lithotripsy (sodium bicarbonate combined with proton pump inhibitor) (Group B). RESULTS: The median age of patients with phytobezoars was 67.84 ± 4.286 years old. Abdominal pain was the most common symptom and peptic ulcers (67.5%) were the most common complication. Bezoar-induced ulcers were more frequent in the gastric angle. The success rate of phytobezoars vanishing in Group A and Group B were similar (92.3% vs. 85.1% within 48 h, 98.7% vs. 97.7% within a week), while the average hospitalization period, average hospitalization cost, second endoscopy rate, and average endoscopic operation time were significantly lower in patients in Group B than in Group A. CONCLUSION: Drug lithotripsy is the preferred effective and safe treatment option for phytobezoars. We advise that an endoscopy should be completed after 48 h for drug lithotripsy.

Adjustable luminescence copper nanoclusters nanoswitch based on competitive coordination of samarium ions for cascade detection of adenosine triphosphate and acid phosphatase activity.

Benefit from the strong coordination property, lanthanide metal ions have been used as competitive reagents to modulate the fluorescence changes of the system. However, lanthanide metal ions as inducers for aggregation-induced emission enhancement in nanosystems is rare. Herein, we report a "turn on-off-on" fluorescent switch for cascade detection of acid phosphatase (ACP) and adenosine triphosphate (ATP) based on the competitive coordination of samarium ions (Sm3+). Novel copper nanoclusters (CuNCs) with long wavelength emission (614 nm) stabilized by glutathione (GSH) and glycylglycine (Gly-Gly) have been confirmed to have AIE property. With the continuous aggregation of GSH/Gly-Gly CuNCs under the induction of Sm3+, the fluorescence of the system increased to achieve the "turn-on" process. The coordinated behaviour between Sm3+ and GSH/Gly-Gly CuNCs is discussed. Due to the strong metal coordination ability of ATP, the Sm3+ coordinated with the GSH/Gly-Gly CuNCs is competed out, resulting in the fluorescence "turn-off" process of the system. As the substrate of enzymatic hydrolysis of ACP, with the continuous hydrolysis of ATP by ACP, Sm3+ coordinates with GSH/Gly-Gly CuNCs again, which leads to the AIE effect and realize the fluorescence "turn-on" process of the system. This strategy results in ATP linear range of 0.508 ~ 120.0 µM with a detection limit of 0.508 µM (S/N = 3) and ACP linear range of 0.011 ~ 30.0 U·L-1 with a detection limit of 0.011 U·L-1 (S/N = 3). Application to biologic samples was successful.

Simple and sensitive electrochemical sensing of amethopterin by using carbon nanobowl/cyclodextrin electrode.

Resulted from the severe side effects, the development of inexpensive, simple and sensitive method for amethopterin (ATP, an antineoplastic drug) is very important but it still remains a challenge. In this work, low cost nanohybrid composed of carbon nanobowl (CNB) and ß-cyclodextrins (ß-CD) (CNB-CD) was prepared with a simple autopolymerization way and applied as electrode material to develop a novel electrochemical sensor of ATP. Scanning-/transmission-electron microscopy, Fourier transform infrared spectrum, photographic image and electrochemical technologies were utilized to characterize morphologies and structure of the as-prepared CNB and CNB-CD materials. On the basic of the coordination advantages from CNB (prominent electrical property and surface area) and ß-CD (superior molecule-recognition and solubility capabilities), the CNB-CD nanohybrid modified electrode exhibits superior sensing performances toward ATP, and a low detection limit of 0.002 µM coupled with larger linearity of 0.005-12.0 µM are obtained. In addition, the as-prepared sensor offers desirable repeatability, stability, selectivity and practical application property, confirming that this proposal may have important applications in the determination of ATP.

The complete plastome genome sequence of Cynanchum otophyllum (Asclepiadaceae), a unique medicinal species in China.

Cynanchum otophyllum Schneid is an important medicinal plant in China. In this paper, the chloroplast genome of C. otophyllum was sequenced based on high-throughput technology, and the chloroplast genome structure characteristics and phylogenetic relationship of C. otophyllum were analyzed. The results showed the complete plastome genome size of C. otophyllumis 160,874bp, including one small single copy (SSC, 19,851bp) and one large single copy (LSC, 92,009bp) regions isolated by a pair of inverted repeat regions (IRs, 24,507bp). The whole plastome genome including 84 protein encoding genes, 8 rRNA and 37 tRNA. Based on the phylogenetic topologies, C. otophyllum shows close association with additional Gomphocarpus and Asclepias genus. This study contributes to an enhanced understanding of the genetic information of C. otophyllum and provides a theoretical basis for the development of molecular markers and phylogeographic of the species, as well as for constructing the phylogenetic tree of Asclepiadaceae.

Identification of Protein Tyrosine Phosphatase (PTP) Substrates.

Protein tyrosine phosphorylation and dephosphorylation are key regulatory mechanisms in eukaryotes. Protein tyrosine phosphorylation and dephosphorylation are catalyzed by protein tyrosine kinases (PTKs) and protein tyrosine phosphatases (PTPs), respectively. The combinatorial action of both PTKs and PTPs is essential for properly maintaining cellular functions. In this unit, we discuss different novel methods to identify PTP substrates. PTPs depend on specific invariant residues that enable binding to tyrosine-phosphorylated substrates and aid catalytic activity. Identifying PTP substrates has paved the way to understanding their role in distinct intracellular signaling pathways. Due to their high specific activity, the interaction between PTPs and their substrates is transient; therefore, identifying the physiological substrates of PTPs has been challenging. To identify the physiological substrates of PTPs, various PTP mutants have been generated. These PTP mutants, named "substrate-trapping mutants," lack catalytic activity but bind tightly to their tyrosine-phosphorylated substrates. Identifying the substrates for the PTPs will provide critical insight into the function of physiological and pathophysiological signal transduction. In this chapter, we describe interaction assays used to identify the PTP substrates.

Effect of iron sources on methane production and phosphorous transformation in an anaerobic digestion system of waste activated sludge.

The iron materials are commonly employed to enhance resource recovery from waste activated sludge through anaerobic digestion (AD). The influence of different iron sources, such as Fe2O3, Fe3O4, and FeCl3 on methane production and phosphorus transformation in AD systems with thermal hydrolyzed sludge as the substrate was assessed in this study. The results indicated that iron oxides effectively promote methane yield and methane production rate in AD systems, resulting in a maximum increase in methane production by 1.6 times. Soluble FeCl3 facilitated the removal of 92.3% of phosphorus from the supernatant through the formation of recoverable precipitates in the sludge. The introduction of iron led to an increase in the abundance of bacteria responsible for hydrolysis and hydrogenotrophic methanogenesis. However, the enrichment of microbial communities varied depending on the specific irons used. This study provides support for AD systems that recover phosphorus and produce methane efficiently from waste sludge.

Corrigendum: Biosynthesis, characterization, and antifungal activity of plant-mediated silver nanoparticles using Cnidium monnieri fruit extract.

[This corrects the article DOI: 10.3389/fmicb.2023.1291030.].

Structure and function of rhizosphere soil microbial communities associated with root rot of Knoxia roxburghii.

The microbial communities in rhizosphere soil play important roles in plant health and crop productivity. However, the microbial community structure of rhizosphere soil still remains unclear. In this study, the composition, diversity and function of the microbial communities in the rhizosphere soil of healthy and diseased plants were compared using Illumina MiSeq high-throughput sequencing. The Sobs (richness) and Shannon (diversity) indices of the soil microbial communities were higher in the rhizospheres of 2- and 3-year-old susceptible plants than in those of the healthy plants. With the increase in planting time, the numbers of fungi tended to decrease, while those of the bacteria tended to increase. Fungal diversity could be used as a biological indicator to measure the health of Knoxia roxburghii. The microbial composition and differential analyses revealed that the rhizosphere soil infested with fungi had a higher relative abundance at the phylum level in Ascomycota and Basidiomycota, while the bacteria had a higher relative abundance of Chloroflexi and a lower relative abundance of Actinobacteriota. At the genus level, the rhizosphere soil infested with fungi had relatively more abundant unclassified_f__Didymellaceae and Solicoccozyma and relatively less abundant Saitozyma and Penicillium. The bacterial genus norank_f__Gemmatimonadaceae was the most abundant, while Arthrobacter was less abundant. In addition, the abundance of Fusarium in the fungal community varied (p = 0.001). It tended to increase in parallel with the planting years. Therefore, it was hypothesized that the change in the community composition of Fusarium may be the primary reason for the occurrence of root rot in K. roxburghii, and the change in the abundance of Fusarium OTU1450 may be an indication of the occurrence of root rot in this species. The community function and prediction analyses showed that the pathogenic fungi increased with the increase in planting years. In general, soil fungi can be roughly divided into three types, including pathotrophs, symbiotrophs, and saprotrophs. An analysis of the differences in the prediction of different rhizosphere functions showed that D and L were significantly different in the COG enrichment pathway of the K. roxburghii rhizosphere bacteria (p < 0.05). The soil physical and chemical properties, including the pH, AK, total potassium (TK), and catalase (S_CAT), had the most significant effect on the soil fungal community, and most of the soil physical and chemical properties significantly correlated with the bacterial community. This study demonstrated that the occurrence of root rot had an important effect on the diversity, structure and composition of microbial communities. In addition, the results will provide a theoretical basis to prevent and control root rot in K. roxburghii.

The presence of micropapillary and/or solid subtypes is an independent prognostic factor for patients undergoing curative resection for stage I lung adenocarcinoma with ground-glass opacity.

Background: Non-predominant or even minimal micropapillary and/or solid (MP/S) subtypes have been reported to exert an unfavorable prognostic influence on surgically resected lung adenocarcinoma (ADC). Currently, there is a lack of evidence to demonstrate that high-grade pathological subtypes, including MP/S components, impact the prognosis of patients with surgically resected lung ADCs with ground-glass opacity (GGO). In this investigation, we explored the prognostic implications of minimal MP/S components in lung ADCs with GGO. Methods: A retrospective cohort study was conducted on 1,004 consecutive patients undergoing curative resection for pathologic stage (p-stage) I lung ADCs featuring GGO on computed tomography (CT) scans between January 2014 and December 2016. Tumors were categorized into MP/S positive (MP/S+) group and MP/S negative (MP/S-) group. MP/S+ tumors were defined when MP/S subtypes constituted ≥1% of the entire tumor. The prognostic impact of MP/S subtypes was evaluated using Kaplan-Meier analysis, Cox proportional hazard model and restricted cubic spine (RCS) model. Results: A total of 86 (8.6%) cases with MP/S+ tumors and 918 (91.4%) cases with MP/S- tumors were identified. The solid component tumor diameter and pathological invasive tumor size of MP/S+ tumors were both significantly larger than that of MP/S- tumors (13.0 vs. 4.0 mm, P<0.001, and 18.0 vs. 10.0 mm, P<0.001, respectively). After a median follow-up of 7.3 years, the presence of MP/S components was significantly associated with decreased RFS (5-year RFS, MP/S+ 88.3% vs. MP/S- 97.4%; P<0.001; HR =1.02). The presence of a histologic lepidic (Lep) component demonstrated a prognostic advantage in both MP/S- (5-year RFS, MP/S-Lep+ 98.0% vs. MP/S-Lep- 95.3%; P=0.01; HR =0.89) and MP/S+ subgroups (5-year RFS, MP/S+Lep+ 93.4% vs. MP/S+Lep- 83.2%; P=0.10; HR =0.84). MP/S+ components ≥5% were the only tumor-related factor that independently affected RFS [hazard ratio (HR) =1.77; 95% confidence interval (CI): 1.07-2.94] according to multivariate analysis. There was a progressively negative impact of the proportion of MP/S subtypes on RFS as illustrated by RCS model. Conclusions: The presence of MP/S patterns in stage I GGO-featured lung ADCs exhibit significant prognostic value and may have implications for tailored postoperative treatment and surveillance strategies, especially when the proportion exceeds 5% of the entire tumor.

Four three-dimensional rare earth metal - organic framework fluorescent sensor for efficient detection of gentamicin sulfate and Fe3.

Excessive use of gentamicin sulfate can cause severe nephrotoxicity and ototoxicity, abnormal levels of Fe3+ intake can also cause serious damage to body. Therefore, establishing a fast and accurate detection method for the above-mentioned substances is of great significance. However, traditional detection methods such as high-performance liquid chromatography still have certain problems such as high cost and complex operation. Fluorescent MOFs are favored by analysts due to their high specific surface area, high porosity, adjustable pore size, and good stability. In this paper, we have synthesized four rare earth MOFs based on the pyridinecarboxylic acid ligand (H2L), which are [Eu(L)1/2H2O]n, [Gd(L)1/2H2O]n, [Sm(L)1/2H2O]n, [Y(L)3/2H2O·DMF]n. The structures of four MOFs were confirmed by single crystal X-ray diffraction, which proved that MOF-1, MOF-2 and MOF-3 were isostructural, and all the four MOFs were three-dimensional structures. In the fluorescence test, gentamicin sulfate and Fe3+ can cause significant fluorescence quenching of MOF-1 and MOF-4 respectively, and show good selectivity and anti-interference performance, as well as low detection limit and wide detection range. This work may provide a possibility for the detection of gentamicin sulfate and iron ions in complex environments.