Clinical Outcomes of a Modern Total Knee Arthroplasty Prosthesis Compared to Its Predecessor at 5-Year Follow-Up: Matched Pair Analysis.

BACKGROUND: Residual pain is an important cause of patient dissatisfaction after total knee arthroplasty (TKA). A recent study at our institution found that a modern prosthesis was associated with less residual and anterior knee pain at 2-year follow-up when compared to its predecessor. The aim of this study is to evaluate these implants at 5-year follow-up. METHODS: From July 2012 to December 2013, 100 consecutive modern TKAs were identified from our prospective Institutional Review Board approved database. All patients with 5-year clinical follow-up (n = 77) were matched in a one-to-one fashion based on age, gender, body mass index, and follow-up with a predecessor TKA. Clinical outcomes were assessed with a patient-administered questionnaire for specifically anterior knee pain, painless noise, painful crepitation, and satisfaction. Overall function was assessed using Knee Society Scores and Western Ontario and McMaster University Osteoarthritis Index. RESULTS: At 5-year follow-up, there were no significant differences between the modern TKA and a predecessor TKA in the Knee Society pain or function scores (P = .24 and P = .54, respectively). The overall prevalence of residual pain was less with the modern TKA compared to its predecessor (19.5% vs 36.3%; P = .02), but the prevalence of isolated anterior knee pain was similar in both cohorts (11.7% vs 22.1%; P = .09). There was no difference in painless noise (19.5% vs 13.3%; P = .28) or satisfaction scores (7.9 ± 2.4 vs 7.6 ± 2.6; P = .25) between the modern and predecessor cohorts. CONCLUSION: At 5-year follow-up, we found that both the modern and predecessor prostheses provided excellent clinical outcomes. The modern TKA was associated with less residual pain compared to its predecessor, but we were unable to detect differences in the prevalence of isolated anterior knee pain, painless noise, Knee Society Scores, or radiographic evaluation.

Role of Anatomical Patella Replacement on Anterior Knee Pain.

BACKGROUND: Anterior knee pain (AKP) remains a complex issue affecting patient satisfaction after total knee arthroplasty. Several radiographic parameters have been shown to be causative factors with various designs. The aim of this study is to evaluate the known radiographic parameters of AKP and clinical outcomes (ie, AKP) in the setting of a modern prosthesis with an anatomic patella button. METHODS: Between July 2012 and December 2013, 90 total knee arthroplasties received 3 skyline views taken at 30°, 45°, and 60°. A patient-administered questionnaire was administered at 2-year follow-up to assess the incidence of AKP, painless noise, and satisfaction. Radiographs were analyzed for patellofemoral overstuffing, patellar tilt, and patellar displacement, and evaluated the patella resection angle. RESULTS: On the patient-administered questionnaire, 10 (11.1%) patients reported AKP of a mild-to-moderate nature. Thirty-one had the best view at 30 Merchant views, 24 had best views at 45, and 35 had best views at 60. We found that patellar resection angle correlated with AKP (odds ratio 1.21, P = .044) and painless noise (odds ratio 1.22, P = .034). Patellar displacement and patellofemoral stuffing did not correlate with AKP or painless noise. No radiographic measurements correlated with changes in Knee Society Score pain or function scores or range of motion. CONCLUSION: We found that a patellar resection angle correlated with the incidence of AKP and painless noise at 2-year follow-up. We failed to find any correlation with patellofemoral overstuffing, patellar displacement, or patellar tilt with clinical outcomes. We recommend the use of 3 Merchant views to fully evaluate the patellofemoral joint.

Wear Analysis of Highly Cross-Linked Polyethylene in Young and Active Patients at Average Fourteen Years: A Concise Follow-Up of a Previous Report.

BACKGROUND: Concerns persist regarding the oxidative stability of annealed highly cross-linked polyethylene (HXLPE) and hence its wear performance especially long term in young and active patients. The purpose of this study is to assess the wear rates and clinical outcomes of a first-generation annealed HXLPE. METHODS: Forty-six patients (57 hips) with noncemented fixation, a mean age of 53 years, and a mean University of California Los Angeles activity score of 8 underwent primary total hip arthroplasty. A 28-mm femoral head against HXLPE liner was used in all cases. Linear wear rates were measured by 2 independent observers. Radiological and clinical assessments were recorded. RESULTS: At a mean of 14 years (range 10-17), the wear rate was 0.03 mm/y (SD ±0.02). There were no revisions for wear-related complications. Using revision for wear-related complications as an endpoint, the survivorship was 100% and we observed no osteolysis. Western Ontario and McMaster Universities Osteoarthritis Index, patient administered questionnaire, and Hospital for Special Surgery hip scores were 91/100, 5/100, and 37/40 respectively. CONCLUSION: This study confirms that a first-generation annealed HXLPE shows excellent wear and clinical results at 10-17 years in young and active patients. Oxidative degradation of an annealed HXLPE does not adversely affect wear and shows no other wear-related complications.

Wear Rates With Large Metal and Ceramic Heads on a Second Generation Highly Cross-Linked Polyethylene at Mean 6-Year Follow-Up.

BACKGROUND: Bearing surface wear and osteolysis are major factors limiting the durability of total hip arthroplasty (THA). Second generation annealed highly cross-linked polyethylene (HXLPE) and ceramics were introduced to THA for their excellent wear rates. However, there is little data comparing the wear rates of metal and ceramic heads on second generation HXLPE. METHODS: Sixty patients who received a noncemented THA with a 32- or 36-mm delta ceramic head were matched with 60 THAs with a 32- or 36-mm metal head based on gender, head size, follow-up, and University of California, Los Angeles activity score. Linear and volumetric wear rates were measured. RESULTS: At mean 6-year follow-up, the mean linear wear rates were 0.012 mm/y (standard deviation [SD] 0.045; 95% confidence interval [CI] 0.001-0.024) and 0.018 mm/y (SD 0.025; 95% CI 0.012-0.025) for the ceramic and metal groups, respectively (P = .724). The mean volumetric wear rates for the ceramic and metal head groups were 11.9 (SD 43.0; 95% CI 0.7-23.0) and 17.3 (SD 23.9; 95% CI 11.1-23.4), respectively. No significant differences were detectable in either the mean linear or volumetric wear rates (P = .380 and P = .398, respectively). CONCLUSION: Second generation HXLPE had low wear rates and we were unable to detect a significant difference in wear rates with 32- or 36-mm metal and ceramic heads. We believe that this is due to the excellent tribological properties of second generation HXLPE. We continue to use ceramic as standard of care because of issues of trunnionosis with metal heads.

Clinical and Radiographic Results of Attune and PFC Sigma Knee Designs at 2-Year Follow-Up: A Prospective Matched-Pair Analysis.

BACKGROUND: Anterior knee pain (AKP) and/or crepitation are important causes of dissatisfaction after total knee arthroplasty (TKA). Aim of this prospective, matched-pair study was to compare 2 different designs of patellofemoral (ie, trochlear groove) TKA. The Attune knee has an anatomic trochlear groove with a medialized dome patellar component vs the PFC Sigma with a single radius trochlear groove with a domed shaped patella. METHODS: Between January 2010 and December 2014, 100 consecutive Attune TKAs were matched to 100 PFC Sigma TKAs based on age, gender, side, and body mass index. All surgeries were performed via medial parapatellar approach and used cemented, posterior-stabilized implants with patellar resurfacing. Clinical evaluations were assessed using Knee Society Scores (KSS) and a patient-administered questionnaire at 2-year follow-up (range, 1.5-3 years). RESULTS: Based on the KSS clinical rating system, excellent clinical results were achieved in 89.4% and 90.7% of Attune and PFC Sigma TKAs, respectively. There were no significant differences in the KS pain or function scores. The overall incidence of AKP was significantly lower with the Attune knee compared to that of the PFC Sigma (12.5% vs 25.8%; P = .02). The incidence of hearing or feeling noise was also less with the Attune knee (17.7% vs 30.9%; P = .02). The incidence of painful crepitation was low in both groups (1.0% vs 4.1%) with no significant difference between groups (P = .37). Both groups had similar high satisfaction scores of 8.6 and 8.4 for the Attune and PFC groups, respectively (P = .09). CONCLUSION: At 2-year follow-up, there were no differences between the PFC Sigma and Attune knees in KSS or satisfaction. However, the Attune group had a lesser incidence of AKP and crepitation. Further studies should focus on AKP and noise in cruciate-retaining knees.

MRI, Retrieval Analysis, and Histologic Evaluation of Adverse Local Tissue Reaction in Metal-on-Polyethylene Total Hip Arthroplasty.

BACKGROUND: The severity and location of adverse local tissue reaction (ALTR) seen in metal-on-polyethylene total hip arthroplasty (THA) is not well described. METHODS: We retrospectively reviewed the records of patients who underwent a revision THA using our biomechanics database. We included all patients who underwent revision surgery for the diagnosis of ALTR with THA implants that had modularity solely at the head-neck junction and excluded patients with implant modularity at sites other than the head-neck junction. Magnetic resonance imaging (MRI) was evaluated by a fellowship-trained radiologist who specializes in evaluating metal artifact reducing MRI sequences to quantify the ALTR lesions. Histology was evaluated for findings of ALTR using the Campbell score. RESULTS: We identified 11 patients in the database. Eight patients had an MRI ALTR grade of severe and 7 did based on the histology score. The mean synovial volume was 218,658 mm3 (range 23,461-451,435 mm3) with a mean maximal synovial thickness of 15.3 mm (range 3-34.3 mm). A disruptive infiltration of the abductors due to pseudocapsule invasion was seen in 67% of the patients with 3 not having abductor involvement. Mean preoperative cobalt and chromium levels were 5.4 ppb (range 1-12.3 ppb) and 1.1 ppb (range 0.6-2.4 ppb), respectively. CONCLUSION: Patients with ALTR from head-neck junction corrosion in metal-on-polyethylene THA may present with large pseudotumors that have previously been under appreciated. Mean preoperative serum cobalt and chromium ion levels remained relatively low, and MRI was an effective way to characterize the size and location of these lesions.

A Comparison of Blood Metal Ions in Total Hip Arthroplasty Using Metal and Ceramic Heads.

BACKGROUND: In recent time, metal ion debris and adverse local tissue reaction have reemerged as an area of clinical concern with the use of large femoral heads after total hip arthroplasty (THA). METHODS: Between June 2014 and January 2015, 60 patients with a noncemented THA using a titanium (titanium, molybdenum, zirconium, and iron alloy) femoral stem and a V40 trunnion were identified with a minimum 5-year follow-up. All THAs had a 32- or 36-mm metal (n = 30) or ceramic (n = 30) femoral head coupled with highly cross-linked polyethylene. Cobalt, chromium, and nickel ions were measured. RESULTS: Patients with metal heads had detectable cobalt and chromium levels. Cobalt levels were detectable in 17 (56.7%) patients with a mean of 2.0 µg/L (range: <1.0-10.8 µg/L). Chromium levels were detectable in 5 (16.7%) patients with a mean of 0.3 µg/L (range: <1.0-2.2 µg/L). All patients with a ceramic head had nondetectable cobalt and chromium levels. Cobalt and chromium levels were significantly higher with metal heads compared to ceramic heads (P < .01). Cobalt levels were significantly higher with 36-mm metal heads compared with 32-mm heads (P < .01). Seven patients with metal femoral heads had mild hip symptoms, 4 of whom had positive findings of early adverse local tissue reaction on magnetic resonance imaging. All ceramic THA was asymptomatic. CONCLUSION: The incidence and magnitude of cobalt and chromium levels is higher in metal heads compared to ceramic heads with this implant system (P < .01). Thirty-six millimeter metal femoral heads result in larger levels of cobalt compared with 32-mm metal heads.

Severe Hand Osteoarthritis Strongly Correlates With Major Joint Involvement and Surgical Intervention.

BACKGROUND: The presence of hand osteoarthritis (OA) increases the risk for developing OA in other major joints. Although genetic predisposition has been implicated in its causation, its exact role has yet to be established. The association of hand OA with symptomatic and asymptomatic major joints has not been previously studied. METHODS: Hundred consecutive patients had a hand photo taken for visual documentation of the hand joints. Radiographs of hand and all major symptomatic joints were analyzed and classified using the Kellgren-Lawrence scale by 2 independent observers including an orthopedic radiologist. RESULTS: Severe hand OA was present in 91% of the patients. Radiographic analysis showed that the hip was involved in 88% of the patients, of whom 85.2% (75) were symptomatic and 14.7% (13) were asymptomatic. Hip arthroplasty was required by 62.5% (55) of symptomatic hip patients. Knee involvement was present in 37% of the patients; all were symptomatic and 81.1% (30) of these required knee arthroplasty. Bilateral surgery was performed in 33% (28) and "2 joint (hip and knee)" surgery was performed in 6% (5). Spine involvement was present in 72% of the patients. There was a significant correlation between hand radiographic findings of OA and hip (r = 0.68; P = .03), knee (r = 0.58; P = .042), and spine (r = .39; P = .05) involvement. CONCLUSION: There was a significant correlation between severe hand OA and hip, knee, and spine involvement. Severity of Hand OA can have a predictive value on multiple joint involvement and risk of surgical intervention. This study emphasizes the need to investigate the genetic predisposition in causation of OA.

Effect of Spinal Deformity on Pelvic Orientation from Standing to Sitting Position.

BACKGROUND: The effect of fixed spinal deformities on a functional pelvis from standing to sitting is not fully understood. We aimed to assess the change in preoperative sagittal pelvic tilt angle (SPTA) from standing to sitting in patients undergoing total hip arthroplasty, comparing flexible and fixed spinal deformities. METHODS: Between July 2011 and October 2011, 68 consecutive unilateral total hip arthroplasties were implanted in 68 patients with a mean age of 71 ± 6 years. Fixed spinal deformity was defined as <10° of the change in SPTA from standing to sitting. Preoperative radiographic evaluation included standing (weight-bearing) anteroposterior and lateral pelvic and lumbosacral radiographs and a sitting lateral pelvic radiograph. RESULTS: The mean standing and sitting SPTA was 3.7° of anterior tilt and 17.7° of posterior tilt, respectively (change of 21.4 ± 12.5°). Seventy-five percent had flexible pelvises, all of which had a posterior tilt from standing to sitting. One patient in the fixed pelvis (1.4%) had a loss of posterior tilt from standing to sitting. The mean change of SPTA from standing to sitting in the fixed and flexible pelvis groups was 5.9 ± 3.5° to 26.7 ± 9.6° of posterior tilt, which was statistically significant (P < .05). CONCLUSION: There was a significant change in sagittal pelvic tilt from standing to sitting, especially in patients with a flexible spine, in which the functional anteversion increases with sitting. The patients with a fixed pelvis had significantly less SPTA in standing (less anteversion) with less posterior sagittal tilt in sitting, which should be incorporated in cup positioning.

Performance of Non-Cemented, Hemispherical, Rim-Fit, Hydroxyapatite Coated Acetabular Component.

The purpose of this study was to assess the durability of a non-cemented, hemispherical rim-fit, hydroxyapatite coated cup with a highly cross-linked polyethylene in 223 total hip arthroplasties. At 6-years follow-up (range, 5-9), there were no cup revisions for osteolysis or loosening. Radiologic evidence of osseointegration was based on presence of Stress Induced Reactive Cancellous Bone and radial trabeculae, seen in 47% and 93% of cups, respectively; both were most prevalent in Zone 1. There was no interference demarcation in any zones. Two cups were revised (0.9%): one for dislocation and another for infection. The Kaplan-Meier survivorship for cup revision for any failure (infection, dislocation) was 99% and for mechanical failure (osteolysis, loosening) was 100%. This design has excellent safety, efficacy and durability.

Durable fixation achieved with medialized, high hip center cementless THAs for Crowe II and III dysplasia.

BACKGROUND: A high hip center total hip arthroplasty (THA) for dysplasia allows more complete socket coverage by native bone at the expense of abnormal hip biomechanics. Despite poor results with cemented components, intermediate-term results with cementless cups at a high hip center have been promising, but there are few reports at long-term followup without bone graft. QUESTIONS/PURPOSES: The purpose of this study was to examine (1) survivorship; 2) radiographic results; and 3) hip scores at a minimum of 10 years for patients treated with high hip center cementless THA for Crowe II and III dysplasia without bone graft. METHODS: We reviewed charts and radiographs of 32 patients with Crowe II or III dysplasia who were treated with high hip center cementless THA; at a mean followup of 12 years (range, 10-21 years), 23 patients (27 hips) were available for review. We sought to medialize cups to the inner table to achieve bony coverage of > 75%. At final followup, the WOMAC and Harris hip scores were recorded. Radiographic analysis including computerized wear evaluation was performed. Radiographic parameters were compared with a control group of 23 patients with Crowe I dysplasia who had cementless cups placed at an anatomic hip center; among the high hip center reconstructions, we also compared wear between those in the superolateral and superomedial quadrants. RESULTS: Kaplan-Meier survivorship for all-cause revisions was 97% (95% confidence interval, 79%-99%) in the high hip center group; this was no different from the anatomic hip center group. There were no revisions for acetabular loosening. Wear rates did not differ significantly between the high hip center and the control group, but lateralized high hip centers were associated with higher (p = 0.002) wear. Hip scores were excellent in both groups. CONCLUSIONS: In Crowe II and III dysplasia, a high hip center cementless cup obviates the need for bone graft and provides durable fixation beyond 10 years. Medialization of these reconstructions seems important to decrease wear.

Reproducible fixation with a tapered, fluted, modular, titanium stem in revision hip arthroplasty at 8-15 years follow-up.

The use of tapered, fluted, modular, distally fixing stems has increased in femoral revision surgery. The goal of this retrospective study was to assess mid-term to long-term outcomes of this implant. Seventy-one hips in 70 patients with a mean age of 69 years were followed for an average of 10 years. Preoperative HHS averaged 50 and improved to 87 postoperatively. Seventy-nine percent hips had Paprosky type 3A or more bone-loss. All stems osseointegrated distally (100%). Two hips subsided >5mm but achieved secondary stability. Sixty-eight percent hips had evidence of bony reconstitution and 21% demonstrated diaphyseal stress-shielding. One stem fractured near its modular junction and was revised with a mechanical failure rate of 1.4%. Distal fixation and clinical improvement were reproducibly achieved with this stem design.

A novel method for accurate and reproducible functional cup positioning in total hip arthroplasty.

Cup positioning is an important variable for short and long term function, stability, and durability of total hip arthroplasty (THA). This novel method utilizes internal and external bony landmarks, and the transverse acetabular ligament for positioning the acetabular component. The cup is placed parallel and superior to the transverse ligament and inside the anterior wall notch of the true acetabulum, then adjusted for femoral version and pelvic tilt and obliquity based on weight bearing radiographs. In 78 consecutive THAs, the mean functional anteversion and abduction angles were 17.9° ± 4.7° and 41.7° ± 3.8°, respectively. 96% of the functional anteversion measurements and 100% of the functional abduction angles were within the safe zone. This technique is an easy, reproducible, and accurate method for functional cup placement.

Safety and efficacy of non-cemented femoral fixation in patients 75 years of age and older.

The aim of this study was to assess peri-operative complications, safety and efficacy of non-cemented femoral fixation in total hip arthroplasty (THA) as compared to cemented femoral fixation in the elderly population. Fifty-two matched pair analysis of patients with 75 years of age and older (104 patients), who underwent primary THA from June 1997 to December 2004, was performed based on age, sex, BMI, and Charnley classification. Mean age was 81 years (75-101) and the average follow up was 3.1 ± 2.9 years (1.2-6.4). There was no difference in peri-operative cardiopulmonary complications, pulmonary failures, deep venous thrombosis, pulmonary embolus, length of stay, or discharge deposition between the two groups. Non-cemented fixation is safe and effective in patients older than 75 years of age.

Assessment of reactive synovitis in rotating-platform posterior-stabilized design: a 10-year prospective matched-pair MRI study.

This is the first long-term (mean 11.6 years), prospective, matched-pair study (based on age, gender, BMI and UCLA scores) using MAVRIC (multi-acquisition variable-resonance image combination) magnetic resonance imaging to analyze reactive synovitis and osteolysis between rotating-platform posterior-stabilized (RP-PS), fixed-bearing metal-back (FB-MB), and all-polyethylene tibial (APT) in active patients (24 total, 8 in each group, mean age of 64 years, mean UCLA of 8.5) with identical femoral component and polyethylene. Reactive synovitis was observed in 6 RP-PS (75%), all 8 FB-MB (100%), and 6 APT (75%). There was a significant difference between the RP-PS and FB-MB knees in volumetric synovitis (P=0.023). Osteolysis with bone loss more than 4mm was seen in 3 FB-MB, 2 APT and none for RP-PS. These were not statistically significant.

Safety and efficacy of a rotating-platform, high-flexion knee design three- to five-year follow-up.

Our hypothesis was that a high-flexion rotating-platform posterior stabilized (RP-PS) design could maximize range of motion (ROM) and improve deep-flexion activities. Eighty-seven consecutive patients (109 knees) with high-flexion RP-PS design were prospectively followed up for a minimum of 3 years. Radiographic and clinical outcomes were analyzed using Knee Society Score criteria and Western Ontario and McMaster Universities Osteoarthritis Index. Good to excellent clinical scores were achieved in 96% of the knees. There were no cases of infection, malalignment, loosening, osteolysis, or spinout. The mean preoperative ROM improved from 110.7° to 124° postoperatively. High-flexion activities such as squatting and kneeling were achieved in 62% and 60% of patients, respectively. High-flexion knee implant is safe and improves ROM and deep-flexion activities. Persistent pain is an important cause of dissatisfaction after total knee arthroplasty.

Properties of the patient administered questionnaires: new scales measuring physical and psychological symptoms of hip and knee disorders.

The Patient Administered Questionnaires (PAQ) incorporate physical and psychological symptoms into one scale and permit more comprehensive self-reports for hip and knee disorders. We tested the psychometric properties of the PAQ-Hip and PAQ-Knee. Correlations between baseline PAQ-Hip and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) were .39 to .72 (n = 102), .39 to .69 for score change (n = 68 post-total hip arthroplasty), and most κ values > .60 (n = 50). Correlations between baseline PAQ-Knee and WOMAC were .35 to .64 (n = 100), .62 to .79 for score change (n = 43 post-total knee arthroplasty), and most κ values >.60 (n = 51). For both scales, effect sizes were higher than for the WOMAC, and there was modest correlation between physical and psychological questions, indicating these concepts are not completely interchangeable. Thus, the PAQ scales have strong psychometric properties and are unique compared with existing scales by including physical and psychological symptoms.

All-polyethylene tibial implant in young, active patients a concise follow-up, 10 to 18 years.

This is a long-term follow-up report of all-polyethylene tibial components in 60 years and younger, active patients. At the mean follow-up of 12.4 ± 2.7 (range, 10-18 years), no more patients were deceased or lost to follow-up, leaving 32 patients (44 knees) for final analysis. Good to excellent results were achieved in 96% of patients. The mean Western Ontario and McMaster Universities Osteoarthritis Index and Knee Society Score were 31 and 97, respectively. Sixty-two percent of patients were participating in sport activities such as running, gym exercises, and playing tennis or golf, with a mean UCLA score of 7.2. There were no cases of malalignment, aseptic loosening, excessive wear, or osteolysis. Seven patients (9 knees) had incomplete, nonprogressive demarcation at the zone 1 tibial interface. Kaplan-Meier survivorship at 10 years for revision due to mechanical reasons and for all failures was 97.7% and 95.5%, respectively.

The effect of patellar replacement technique on patellofemoral complications and anterior knee pain.

Routine patella replacement with total knee arthroplasty has not been universally adopted because of associated patellofemoral complications such as anterior knee pain (AKP). In the proposed technique, the articular surface of the lateral facet of the patella is excised to the depth of the subchondral bone, and the medial facet is then cut parallel to the anterior surface. We evaluated any correlation between various radiographic parameters and AKP in 100 consecutive fixed-bearing posterior-stabilized total knee arthroplasties. There were no cases of fracture, avascular necrosis, subluxation, dislocation, patellar baja, or overstuffing of the patella. Anterior knee pain was present in 11% of cases, and no cases were severe or disabling. There were no correlations between AKP, range of motion, patellar size and shape, and any of the radiographic parameters.

Minimum 5-year wear analysis of first-generation highly cross-linked polyethylene in patients 65 years and younger.

The purpose of this study was to analyze wear rates of highly cross-linked polyethylene comparing the Martell and the Roman methods in 112 total hip arthroplasties in patients 65 years and younger, with a mean follow-up of 5.7 years. The mean wear rates in the Martell and Roman methods were 0.014 ± 0.05 mm/y and 0.011 ± 0.04 mm/y when including all values and 0.043 ± 0.028 mm/y and 0.038 ± 0.02 mm/y when negative values were assumed to be zero, respectively. Both Roman and Martell methods showed similar low wear rates with negative values. The Roman method had higher precision and was more user friendly because it required less steps to measure wear, especially when comparing with the manual feature of Martell method.