Does the osteoarthritic shoulder have altered rotator cuff vectors with increasing glenoid deformity? An in silico analysis.

BACKGROUND: A transverse force couple (TFC) functional imbalance has been demonstrated in osteoarthritic shoulders by recent 3-dimensional (3D) muscle volumetric studies. Altered rotator cuff vectors may be an additional factor contributing to a muscle imbalance and the propagation of glenoid deformity. METHODS: Computed tomography images of 33 Walch type A and 60 Walch type B shoulders were evaluated. The 3D volumes of the entire subscapularis, supraspinatus, and infraspinatus-teres minor (ISP-Tm) and scapula were manually segmented. The volume masks and scapular landmarks were imported into MATLAB to create a coordinate system, enabling calculation of muscle force vectors. The direction of each muscle force vector was described in the transverse and vertical plane, calculated with respect to the glenoid. Each muscle vector was then resolved into compression and shear force across the glenoid face. The relationship between muscle force vectors, glenoid retroversion or inclination, compression/shear forces on the glenoid, and Walch type was determined using linear regression. RESULTS: In the transverse plane with all rotator cuff muscles combined, increasing retroversion was significantly associated with increasing posterior drag (P < .001). Type B glenoids had significantly more posterior drag than type A (P < .001). In the vertical plane for each individual muscle group and in combination, superior drag increases as superior inclination increases (P < .001). Analysis of individual muscle groups showed that the anterior thrust of ISP-Tm and supraspinatus switched to a posterior drag at 8° and 10° of retroversion respectively. The compression force on the glenoid face by ISP-Tm and supraspinatus did not change with increasing retroversion for type A shoulders (P = .592 and P = .715, respectively), but they did for type B shoulders (P < .001 for both). The glenoid shear force ratio in the transverse plane for the ISP-Tm and supraspinatus moved from anterior to posterior shear with increasing glenoid retroversion, crossing zero at 8° and 10° of retroversion, whereas the subscapularis exerted a posterior shear force for every retroversion angle. CONCLUSION: Increased glenoid retroversion is associated with increased posterior shear and decreased compression forces on the glenoid face, explaining some of the pathognomonic bone morphometrics that characterize the osteoarthritic shoulder. Although the subscapularis always maintains a posterior thrust, the ISP-Tm and supraspinatus together showed an inflection at 8° and 10° of retroversion, changing from an anterior thrust to a posterior drag. This finding highlights the importance that in anatomic TSA the rotator cuff functional balance might be better restored by correcting glenoid retroversion to less than 8°.

Does the Walch type B shoulder have a transverse force couple imbalance? A volumetric analysis of segmented rotator cuff muscles in osteoarthritic shoulders.

BACKGROUND: The etiology of the Walch type B shoulder remains unclear. We hypothesized that a scapulohumeral muscle imbalance, due to a disturbed transverse force couple (TFC) between the anterior and posterior rotator cuff muscles, may have a role in the pathogenesis of the type B morphology. The purpose of this study was to determine whether there is a TFC imbalance in the Walch type B shoulder using an imaging-based 3-dimensional (3D) volumetric and fatty infiltration assessment of segmented rotator cuff muscles. METHODS: Computed tomography images of 33 Walch type A and 60 Walch type B shoulders with the complete scapula and humerus including the distal humeral epicondyles were evaluated. The 3D volumes of the entire subscapularis, supraspinatus, and infraspinatus-teres minor (Infra-Tm) were manually segmented and analyzed. Additionally, anthropometric parameters including glenoid version, glenoid inclination, posterior humeral head subluxation, and humeral torsion were measured. The 3D muscle analysis was then compared with the anthropometric parameters using the Wilcoxon rank sum and Kruskal-Wallis tests. RESULTS: There were no significant differences (P > .200) in muscle volume ratios between the Infra-Tm and the subscapularis in Walch type A (0.93) and type B (0.96) shoulders. The fatty infiltration percentage ratio, however, was significantly greater in type B shoulders (0.94 vs. 0.75, P < .001). The Infra-Tm to subscapularis fatty infiltration percentage ratio was significantly larger in patients with >75% humeral head subluxation than in those with 60%-75% head subluxation (0.97 vs. 0.74, P < .001) and significantly larger in patients with >25° of retroversion than in those with <15° of retroversion (1.10 vs. 0.75, P = .004). The supraspinatus fatty infiltration percentage was significantly lower in Walch type B shoulders than type A shoulders (P = .004). Walch type A shoulders had mean humeral retrotorsion of 22° ± 10° whereas Walch type B shoulders had humeral retrotorsion of only 14° ± 9° relative to the epicondylar axis (P < .001). CONCLUSION: The TFC is in balance in the Walch type B shoulder in terms of 3D volumetric rotator cuff muscle analysis; however, the posterior rotator cuff does demonstrate increased fatty infiltration. Posterior humeral head subluxation and glenoid retroversion, which are pathognomonic of the Walch type B shoulder, may lead to a disturbance in the length-tension relationship of the posterior rotator cuff, causing fatty infiltration.

The Walch type B humerus: glenoid retroversion is associated with torsional differences in the humerus.

BACKGROUND: The Walch type B glenoid has the hallmark features of retroversion, joint subluxation, and bony erosion. Although the type B glenoid has been well described, the morphology of the corresponding type B humerus is poorly understood. As such, the aim of this imaging-based anthropometric study was to investigate humeral torsion in Walch type B shoulders. METHODS: Three-dimensional models of the full-length humerus were generated from computed tomography data for the Walch type B group (n = 59) and for a control group of normal nonarthritic shoulders (n = 59). An anatomic humeral head-neck plane was created and used to determine humeral torsion relative to the epicondylar axis. Measurements were repeated, and intraclass correlation coefficients were calculated. RESULTS: The type B humeri had significantly (P < .001) less retrotorsion (14° ± 9°) than the control group (36° ± 12°) relative to the epicondylar axis. Male and female individuals within the control group showed statistically significant differences in humeral torsion (P = .043), which were not found in the type B group. Inter-rater reliability showed excellent agreement for humeral torsion (intraclass correlation coefficient, 0.962). A subgroup analysis between Walch type B2 and B3 shoulders showed no significant differences in any of the humeral or glenoid parameters. CONCLUSION: The Walch type B humerus has significantly less retrotorsion than non-osteoarthritic shoulders. At present, it is unknown whether the altered humeral retrotorsion is a cause or effect of the type B glenoid. In addition, it is unknown whether surgeons should be reconstructing type B2 humeral component version to pathologic torsion or to nonpathologic population means to optimize arthroplasty survivorship.

Many Shoulder MRI Findings in Elite Professional Throwing Athletes Resolve After Retirement: A Clinical and Radiographic Study.

BACKGROUND: Anatomic findings on MRI scans of the shoulder likely affect patients differently based on their physical demands and fitness levels. The natural history of these anatomic findings once professional overhead athletes retire remains unclear. A better understanding of what happens with these findings after retirement may influence how we manage shoulder problems in athletes. PURPOSE: (1) What is the natural history of MRI-observed findings in the throwing and nonthrowing shoulders of professional European handball players after retirement from the sport? What proportion of these individuals have diagnosable findings on MRI, and do these findings disappear after retirement? (2) Do clinical findings such as Constant and Murley score and shoulder ROM change after retirement in these professional overhead athletes? METHODS: The inception cohort of this series consisted of the entire Swiss National European handball team except the goalkeepers. These 30 professional players also played in the highest Swiss handball league in 2001. None of these players previously had shoulder surgery. During their career, they had a clinical assessment and bilateral shoulder MRI as part of an earlier study. We sought to evaluate the players who had retired and did not have a history of shoulder surgery, to evaluate the natural history of MRI-observed findings made in the initial study during their professional career. Of the 30 players, 10 were excluded (four continued to play professionally, four declined participation, and two had surgery after the initial study), leaving 20 (66%) for analysis at a mean of 6 years (SD, 3 years) after retirement. To gain a better understanding of the evolution of these MRI findings in the longer-term, we also evaluated 18 additional former professional European handball players who did not have any history of shoulder surgery, had all played in the highest Swiss league and for the National Team, and had terminated their career at a mean of 15 years (SD, 3 years) ago. All the subjects in both study groups (those at 6 and 15 years after retirement) underwent a detailed interview, standardized clinical examination including ROM measurements, collection of the Constant and Murley scores and the subjective shoulder value of both shoulders, and bilateral shoulder MRI. MRI findings (consisting of abnormalities and normal variations) were reported as radiographic diagnoses, independent of the potential that these findings could be considered normal variations in people in this age group. RESULTS: At the initial MRI evaluation, the proportion of active professional European handballers with diagnosable MRI findings in the throwing shoulder was 19 of 20 (95%) and for the handballers with nonthrowing shoulders was 17 of 20 (85%), while 15 years after retirement, both shoulders of all subjects showed MRI findings. None of the rotator cuff tears progressed to full-thickness tears after retirement. In the throwing shoulders, we observed fewer individuals with ganglion cysts larger than 5 mm (initial followup: six of 20 [30%] versus 6 years after retirement: 0 of 20 (0%); odds ratio, 14.5; [95% CI, 0.7-283]; p = 0.044). The Constant and Murley score increased in the throwing shoulder from 93 points (SD, 6 points) at initial followup to 98 points (SD, 3 points) at a mean of 6 years after retirement (mean difference, 5 points; SD, 5 points; 95% CI, 2.5-7.4; p < 0.001), and to 97 points (SD, 3 points) at a mean of 15 years after retirement. However these differences are below the typically reported minimum clinically important difference for the Constant and Murley score, and so are unlikely to be clinically relevant. External rotation in 90° abduction remained increased in the throwing shoulder compared with the nonthrowing shoulder up to 15 years after retirement (initial followup: mean difference, 8°; p = 0.014; 15 years after retirement: mean difference, 4°; SD, 15; p = 0.026). Internal rotation remained decreased in the throwing compared with the nonthrowing shoulders (during the career: mean difference, 5° [SD, 10°], p = 0.036; 15 years after retirement: mean difference, 3° [SD, 4°], p = 0.021). CONCLUSIONS: Our data suggest that findings of the throwing shoulder like partial rotator cuff tears, bony cysts and ganglions do not progress after retirement, and sometimes they resolve. Because of this and because many MRI changes correlate poorly with clinical symptoms, the indication for surgical treatment of these findings should be questioned very carefully. LEVEL OF EVIDENCE: Level II, prognostic study.

New quantitative radiographic parameters for vertical and horizontal instability in acromioclavicular joint dislocations.

PURPOSE: The aim of this study was to identify the most accurate and reliable quantitative radiographic parameters for assessing vertical and horizontal instability in different Rockwood grades of acromioclavicular joint (ACJ) separations. Furthermore, the effect of projectional variation on these parameters was investigated in obtaining lateral Alexander view radiographs. METHODS: A Sawbone model of a scapula with clavicle was mounted on a holding device, and acromioclavicular dislocations as per the Rockwood classification system were simulated with the addition of horizontal posterior displacement. Projectional variations for each injury type were performed by tilting/rotating the Sawbone construct in the coronal, sagittal or axial plane. Radiographic imaging in the form of an anterior-posterior Zanca view and a lateral Alexander view were taken for each injury type and each projectional variation. Five newly defined radiographic parameters for assessing horizontal and vertical displacement as well as commonly used coracoclavicular distance view were measured. Reliability, validity and the effect of projectional variation were investigated for these radiographic measurements. RESULTS: All radiographic parameters showed excellent intra- and interobserver reliability. The validity was excellent for the acromial centre line to dorsal clavicle (AC-DC) in vertical displacement and for the glenoid centre line to posterior clavicle (GC-PC) in horizontal displacement, whilst the remaining measurements showed moderate validity. For AC-DC and GC-PC, convergent validity expressed strong correlation to the effective distance and discriminant validity demonstrated its ability to differentiate between various grades of ACJ dislocations. The effect of projectional variation increased with the degree of deviation and was maximal (3 mm) for AC-DC in 20° anteverted malpositioning and for GC-PC in 20° retroverted malpositioning. CONCLUSIONS: AC-DC and the GC-PC are two novel quantitative radiographic parameters of vertical and horizontal instability in ACJ dislocations that demonstrate excellent reliability and validity with reasonable inertness to malpositioning. The use of AC-DC for assessing vertical displacement and GC-PC for assessing horizontal displacement in a single Alexander view is recommended to guide the appropriate management of ACJ dislocations. A better appreciation of the degree of horizontal instability, especially in lower Rockwood grades (II, III) of ACJ dislocations, may improve management of these controversial injuries.

Triceps-sparing extra-articular step-cut olecranon osteotomy for distal humeral fractures: an anatomic study.

BACKGROUND: This anatomic study investigated the distal humeral articular surface exposure achievable through a triceps-sparing oblique extra-articular osteotomy of the olecranon with a step-cut modification compared with the anconeus flap transolecranon apex distal chevron osteotomy. In addition, the bone contact surface areas of the osteotomized surfaces after transolecranon and extra-articular osteotomies were compared. METHODS: Seven pairs of fresh adult cadaveric elbow joints were examined. Each of the right elbows underwent triceps-sparing extra-articular step-cut olecranon osteotomy (SCOOT) with an anconeus flap, and the left elbows underwent the anconeus flap transolecranon apex distal chevron osteotomies (CO). The articular surface exposed by each of the osteotomy techniques was then digitally analyzed using a 3-dimensional measurement system. The bone contact surface area of the osteotomized surfaces was also assessed. RESULTS: The percentage of total joint exposed by the SCOOT group was less than the CO group (SCOOT: 64% ± 3% vs. CO: 73% ± 3%; P = .002). There was significantly greater bone contact surface area of the osteotomized surfaces in the SCOOT group compared with the CO group (SCOOT: 1172 ± 251 mm2 vs. CO: 457 ± 133 mm2; P = .002). CONCLUSION: The triceps SCOOT procedure with an anconeus flap provides excellent distal humeral articular surface exposure with the added benefit of a substantially increased (2.6-times) bone contact surface area of the osteotomized surfaces.

Neer Award 2016: reduced muscle degeneration and decreased fatty infiltration after rotator cuff tear in a poly(ADP-ribose) polymerase 1 (PARP-1) knock-out mouse model.

BACKGROUND: Disturbed muscular architecture, atrophy, and fatty infiltration remain irreversible in chronic rotator cuff tears even after repair. Poly (adenosine 5'-diphosphate-ribose) polymerase 1 (PARP-1) is a key regulator of inflammation, apoptosis, muscle atrophy, muscle regeneration, and adipocyte development. We hypothesized that the absence of PARP-1 would lead to a reduction in damage to the muscle subsequent to combined tenotomy and neurectomy in a PARP-1 knockout (KO) mouse model. METHODS: PARP-1 KO and wild-type C57BL/6 (WT group) mice were analyzed at 1, 6, and 12 weeks (total n = 84). In all mice, the supraspinatus and infraspinatus muscles of the left shoulder were detached and denervated. Macroscopic analysis, magnetic resonance imaging, gene expression analysis, immunohistochemistry, and histology were used to assess the differences in PARP-1 KO and WT mice. RESULTS: The muscles in the PARP-1 KO group had significantly less retraction, atrophy, and fatty infiltration after 12 weeks than in the WT group. Gene expression of inflammatory, apoptotic, adipogenic, and muscular atrophy genes was significantly decreased in PARP-1 KO mice in the first 6 weeks. DISCUSSION: Absence of PARP-1 leads to a reduction in muscular architectural damage, early inflammation, apoptosis, atrophy, and fatty infiltration after combined tenotomy and neurectomy of the rotator cuff muscle. Although the macroscopic reaction to injury is similar in the first 6 weeks, the ability of the muscles to regenerate was much greater in the PARP-1 KO group, leading to a near-normalization of the muscle after 12 weeks.

Long-term Outcomes After Open Repair of Humeral Avulsion of the Glenohumeral Ligament.

Background: There is a lack of data regarding the long-term clinical outcomes of open repair of humeral avulsion of the glenohumeral ligament (HAGL). Purpose: To examine the long-term patient outcomes, prevalence of related shoulder lesions, and return to sports in patients who have had open HAGL repair. Study Design: Case series; Level of evidence, 4. Methods: Included were 47 patients who underwent open repair of an HAGL lesion between 1995 and 2013. Clinical results were assessed using the Western Ontario Shoulder Instability Index (WOSI). Recurrence of instability, additional surgeries, confidence in the shoulder, level and type of sport before and after surgery, and return to sports were documented. Results: The mean follow-up duration was 105 months (range, 16-247 months). The mean postoperative WOSI score was 410. Postoperatively, 10 patients experienced a recurrence of instability. Subgroup analysis of patients who reported recurrence demonstrated significantly worse WOSI scores compared with patients who did not experience recurrence (730 [95% CI, 470-990] vs 320 [95% CI, 210-430], respectively; P = .007). Before surgery, 33 patients participated in competitive sports, compared with 22 patients after surgery. No postoperative neurologic or vascular complications were recorded. In 51% of patients, a labral tear was noted as a concomitant injury. Conclusion: Open repair of an HAGL lesion restored shoulder stability with good results. However, recurrence was significant (21%) with longer follow-up, and return to sports was affected. Associated lesions were prevalent.

Is preoperative elevated glycated hemoglobin (HbA1c) a risk factor for postoperative shoulder stiffness after posterior-superior rotator cuff repair?

Background: Postoperative shoulder stiffness (POSS) affects a large number of patients undergoing rotator cuff repair (RCR). Diabetes may increase the risk of POSS. Preoperative glycated hemoglobin (HbA1c) is a convenient measure of glucose control in this group. The aim of the present study was to determine a relationship between preoperative HbA1c and POSS in patients undergoing postero-superior RCR. Methods: Two hundred fifty patients with full-thickness postero-superior rotator cuffs who underwent RCR were followed for 6 months. Pre- and post-operative external rotation with arm by the side at 3 and 6 months were measured. Patient demographics, tear characteristics, preoperative HbA1c level, and surgical details were recorded. Patients with subscapularis tears, concomitant instability, partial thickness tears, arthritis, and irreparable rotator cuff tears were excluded. Univariate and multivariate logistic regression were used to determine the association between patient characteristics and POSS at 6 months. Results: At the end of 6 months, 16% (41/250) of patients had POSS. Multivariate analysis demonstrated an elevated preoperative HbA1c level was a statistically significant predictor of POSS at 6 months (odds ratio 7.04, P < .01) after posterior superior RCR. Lower preoperative external rotation (P = .02) and female sex (P < .01) were also risk factors associated with POSS. Age, hand dominance, worker's compensation claim status, etiology, and size of the tear, surgical technique, and additional treatments were not statistically significant predictors. Conclusion: Elevated preoperative HbA1c level is associated with POSS after RCR. Measuring HbA1c preoperatively may assist clinicians to identify patients at risk of POSS. HbA1c is a modifiable parameter that could then be optimized preoperatively in order to improve outcomes.

Development of a Cadaveric Shoulder Motion Simulator with Open-Loop Iterative Learning for Dynamic, Multiplanar Motion: A Preliminary Study.

Ex vivo shoulder motion simulators are commonly used to study shoulder biomechanics but are often limited to performing simple planar motions at quasi-static speeds using control architectures that do not allow muscles to be deactivated. The purpose of this study was to develop an open-loop tendon excursion controller with iterative learning and independent muscle control to simulate complex multiplanar motion at functional speeds and allow for muscle deactivation. The simulator performed abduction/adduction, faceted circumduction, and abduction/adduction (subscapularis deactivation) using a cadaveric shoulder with an implanted reverse total shoulder prosthesis. Kinematic tracking accuracy and repeatability were assessed using maximum absolute error (MAE), root mean square error (RMSE), and average standard deviation (ASD). During abduction/adduction and faceted circumduction, the RMSE did not exceed 0.3, 0.7, and 0.8 degrees for elevation, plane of elevation, and axial rotation, respectively. During abduction/adduction, the ASD did not exceed 0.2 degrees. Abduction/adduction (subscapularis deactivation) resulted in a loss of internal rotation, which could not be restored at low elevation angles. This study presents a novel control architecture, which can accurately simulate complex glenohumeral motion. This simulator will be used as a testing platform to examine the effect of shoulder pathology, treatment, and rehabilitation on joint biomechanics during functional shoulder movements.

Impingement on the internet: evaluating the quality and readability of online subacromial impingement information.

Patients increasingly access the internet to learn about their orthopaedic conditions. Despite this, online information may be unregulated, of questionable quality and difficulty to read. OBJECTIVES: Therefore, this study aimed to evaluate the readability and quality of the online information concerning subacromial impingement syndrome. METHODS: A search using Australia's three most popular online search engines was undertaken using the search terms 'subacromial impingement syndrome' and 'shoulder impingement'. The first 15 websites for each term were evaluated. Duplicates, advertisements and sponsored links were removed.The quality and readability of each website were calculated using the DISCERN and Flesch-Kincaid Reading Ease (FKRE) tools, respectively. The differences in quality and readability between each website type (healthcare/academic, commercial, news outlet, charitable/not-for-profit, layperson, government) was assessed using analysis of variance. The correlation between quality and readability was assessed using the Pearson correlation coefficient. RESULTS: The majority of 35 unique websites analysed were of 'poor'/'fair' quality (determined via the DISCERN instrument) and 'difficult' readability (per the FKRE tool), with no correlation established between the scores. There was no statistically significant difference in quality across website types, however layperson, news outlet and government websites were found to be significantly more readable than alternate website categories (p<0.05). CONCLUSIONS: We determined that much of the online information concerning subacromial impingement syndrome may be difficult to read and/or of poor quality. By recognising the shortcomings of information accessed by patients online, it is hoped clinicians may be prompted to better educate their patients.

Mapping of the Inferior Glenohumeral Ligament for Suture Pullout Strength: A Biomechanical Analysis.

BACKGROUND: Suture pullout during rehabilitation may result in loss of tension in the inferior glenohumeral ligament (IGHL) and contribute to recurrent instability after capsular plication, performed with or without labral repair. To date, the suture pullout strength in the IGHL is not well-documented. This may contribute to recurrent instability. PURPOSE/HYPOTHESIS: A cadaveric biomechanical study was designed to investigate the suture pullout strength of sutures in the IGHL. We hypothesized that there would be no significant variability of suture pullout strength between specimens and zones. Additionally, we sought to determine the impact of early mobilization on sutures in the IGHL at time zero. We hypothesized that capsular plication sutures would fail under low load. STUDY DESIGN: Descriptive laboratory study. METHODS: Seven fresh-frozen cadaveric shoulders were dissected to isolate the IGHL complex, which was then divided into 18 zones. Sutures in these zones were attached to a linear actuator, and the resistance to suture pullout was recorded. A suture pullout strength map of the IGHL was constructed. These loads were used to calculate the load applied at the hand that would initiate suture pullout in the IGHL. RESULTS: Mean suture pullout strength for all specimens was 61.6 ± 26.1 N. The maximum load found to cause suture pullout through tissue was found to be low, regardless of zone of the IGHL. Calculations suggest that an external rotation force applied to the hand of only 9.6 N may be sufficient to tear capsular sutures at time zero. CONCLUSION: This study did not provide clear evidence of desirable locations for fixation in the IGHL. However, given the low magnitude of failure loads, the results suggest the timetable for initiation of range-of-motion exercises should be reconsidered to prevent suture pullout through the IGHL. CLINICAL RELEVANCE: From this biomechanical study, the magnitude of force required to cause suture pullout through the IGHL is met or surpassed by normal postoperative early range-of-motion protocols.

What Is the Most Reliable Method of Measuring Glenoid Bone Loss in Anterior Glenohumeral Instability? A Cadaveric Study Comparing Different Measurement Techniques for Glenoid Bone Loss.

BACKGROUND: Preoperative quantification of bone loss has a significant effect on surgical decision making and patient outcomes. Various measurement techniques for calculating glenoid bone loss have been proposed in the literature. To date, no studies have directly compared measurement techniques to determine which technique, if any, is the most reliable. PURPOSE/HYPOTHESIS: To identify the most consistent and accurate techniques for measuring glenoid bone loss in anterior glenohumeral instability. Our hypothesis was that linear measurement techniques would have lower consistency and accuracy than surface area and statistical shape model-based measurement techniques. STUDY DESIGN: Controlled laboratory study. METHODS: In 6 fresh-frozen human shoulders, 3 incremental bone defects were sequentially created resulting in a total of 18 glenoid bone defect samples. Analysis was conducted using 2D and 3D computed tomography (CT) en face images. A total of 6 observers (3 experienced and 3 with less experience) measured the bone defect of all samples with Horos imaging software using 5 common methods. The methods included 2 linear techniques (Shaha, Griffith), 2 surface techniques (Barchilon, PICO), and 1 statistical shape model formula (Giles). Intraclass correlation (ICC) using a consistency model was used to determine consistency between observers for each of the measurement methods. Paired t tests were used to calculate the accuracy of each measurement technique relative to physical measurement. RESULTS: For the more experienced observers, all methods indicated good consistency (ICC > 0.75; range, 0.75-0.88), except the Shaha method, which indicated moderate consistency (0.65 < ICC < 0.75; range, 0.65-0.74). Estimated consistency among the experienced observers was better for 2D than 3D images, although the differences were not significant (intervals contained 0). For less experienced observers, the Giles method in 2D had the highest estimated consistency (ICC, 0.88; 95% CI, 0.76-0.95), although Giles, Barchilon, Griffith, and PICO methods were not statistically different. Among less experienced observers, the 2D images using Barchilon and Giles methods had significantly higher consistency than the 3D images. Regarding accuracy, most of the methods statistically overestimated the actual physical measurements by a small amount (mean within 5%). The smallest bias was observed for the 2D Barchilon measurements, and the largest differences were observed for Giles and Griffith methods for both observer types. CONCLUSION: Glenoid bone loss calculation presents variability depending on the measurement technique, with different consistencies and accuracies. We recommend use of the Barchilon method by surgeons who frequently measure glenoid bone loss, because this method presents the best combined consistency and accuracy. However, for surgeons who measure glenoid bone loss occasionally, the most consistent method is the Giles method, although an adjustment for the overestimation bias may be required. CLINICAL RELEVANCE: The Barchilon method for measuring bone loss has the best combined consistency and accuracy for surgeons who frequently measure bone loss.

Axillary Nerve Position in Humeral Avulsions of the Glenohumeral Ligament.

BACKGROUND: The axillary nerve is at risk during repair of a humeral avulsion of the glenohumeral ligament (HAGL). PURPOSE: To measure the distance between the axillary nerve and the free edge of a HAGL lesion on preoperative magnetic resonance imaging (MRI) and compare these findings to the actual intraoperative distance measured during open HAGL repair. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: A total of 25 patients with anterior instability were diagnosed as having a HAGL lesion on MRI and proceeded to open repair. The proximity of the axillary nerve to the free edge of the HAGL lesion was measured intraoperatively at the 6-o'clock position relative to the glenoid face. Preoperative MRI was then used to measure the distance between the axillary nerve and the free edge of the HAGL lesion at the same position. Distances were compared using paired t tests and Bland-Altman analyses. RESULTS: The axillary nerve lay, on average, 5.60 ± 2.51 mm from the free edge of the HAGL lesion at the 6-o'clock position on preoperative MRI, while the mean actual intraoperative distance during open HAGL repair was 4.84 ± 2.56 mm, although this difference was not significant (P = .154). In 52% (13/25) of patients, the actual intraoperative distance of the axillary nerve to the free edge of the HAGL lesion was overestimated by preoperative MRI. In 36% (9/25), this overestimation of distance was greater than 2 mm. CONCLUSION: The observed overestimations, although not significant in this study, suggest a smaller safety margin than might be expected and hence a substantially higher risk for potential damage. We recommend that shoulder surgeons exercise caution in placing capsular sutures in the lateral edge when contemplating arthroscopic repair of HAGL lesions, as the proximity of the nerve to the free edge of the HAGL tear is small enough to be injured by arthroscopic suture-passing instruments.

BiPOD Arthroscopic Acromioclavicular Repair Restores Bidirectional Stability.

Stabilizing the acromioclavicular joint in the vertical and horizontal planes is challenging, and most current techniques do not reliably achieve this goal. The BiPOD repair is an arthroscopically assisted procedure performed with image intensifier guidance that reconstructs the coracoclavicular ligaments as well as the acromioclavicular ligaments to achieve bidirectional stability. Repair is achieved with a combination of 2-mm FiberTape (Arthrex, Naples, Florida) and 20-mm Poly-Tape (Neoligaments, Leeds, England) to achieve rigid repair, prevent bone abrasion, and promote tissue ingrowth. This study is a prospective review of the first 6 patients treated for high-grade acute acromioclavicular injury with the BiPOD technique. The study included 6 men who were 21 to 36 years old (mean, 27 years). At 6-month follow-up, complications were recorded and radiographic analysis was used to determine the coracoclavicular distance for vertical reduction and the amount of acromioclavicular translation on the Alexander axillary view was used to determine horizontal reduction. One patient had a superficial infection over the tape knot. The difference in coracoclavicular distance between the operated side and the uninvolved side was 9±2 mm preoperatively and 0.3±2 mm at 6-month follow-up. On Alexander axillary view, all 6 patients showed stable reduction, which is defined as a clavicle that is in line with the acromion. The findings show that BiPOD acromioclavicular reconstruction restores bidirectional stability of the acromioclavicular joint at 6 months. [Orthopedics. 2017; 40(1):e35-e43.].

Optimal Lateral Row Anchor Positioning in Posterior-Superior Transosseous Equivalent Rotator Cuff Repair: A Micro-Computed Tomography Study.

BACKGROUND: The optimal placement of suture anchors in transosseous-equivalent (TOE) double-row rotator cuff repair remains controversial. PURPOSE: A 3-dimensional (3D) high-resolution micro-computed tomography (micro-CT) histomorphometric analysis of cadaveric proximal humeral greater tuberosities (GTs) was performed to guide optimal positioning of lateral row anchors in posterior-superior (infraspinatus and supraspinatus) TOE rotator cuff repair. STUDY DESIGN: Descriptive laboratory study. METHODS: Thirteen fresh-frozen human cadaveric proximal humeri underwent micro-CT analysis. The histomorphometric parameters analyzed in the standardized volumes of interest included cortical thickness, bone volume, and trabecular properties. RESULTS: Analysis of the cortical thickness of the lateral rows demonstrated that the entire inferior-most lateral row, 15 to 21 mm from the summit of the GT, had the thickest cortical bone (mean, 0.79 mm; P = .0001), with the anterior-most part of the GT, 15 to 21 mm below its summit, having the greatest cortical thickness of 1.02 mm (P = .008). There was a significantly greater bone volume (BV; posterior, 74.5 ± 27.4 mm3; middle, 55.8 ± 24.9 mm3; anterior, 56.9 ± 20.7 mm3; P = .001) and BV as a percentage of total tissue volume (BV/TV; posterior, 7.3% ± 2.7%, middle, 5.5% ± 2.4%; anterior, 5.6% ± 2.0%; P = .001) in the posterior third of the GT than in intermediate or anterior thirds. In terms of both BV and BV/TV, the juxta-articular medial row had the greatest value (BV, 87.3 ± 25.1 mm3; BV/TV, 8.6% ± 2.5%; P = .0001 for both) followed by the inferior-most lateral row 15 to 21 mm from the summit of the GT (BV, 62.0 ± 22.7 mm3; BV/TV, 6.1% ± 2.2%; P = .0001 for both). The juxta-articular medial row had the greatest value for both trabecular number (0.3 ± 0.06 mm-1; P = .0001) and thickness (0.3 ± 0.08 µm; P = .0001) with the lowest degree of trabecular separation (1.3 ± 0.4 µm; P = .0001). The structure model index (SMI) has been shown to strongly correlate with bone strength, and this was greatest at the inferior-most lateral row 15 to 21 mm from the summit of the GT (2.9 ± 0.9; P = .0001). CONCLUSION: The inferior-most lateral row, 15 to 21 mm from the tip of the GT, has good bone stock, the greatest cortical thickness, and the best SMI for lateral row anchor placement. The anterior-most part of the GT 15 to 21 mm below its summit had the greatest cortical thickness of all zones. The posterior third of the GT also has good bone stock parameters, second only to the medial row. The best site for lateral row cortical anchor placement is 15 to 21 mm below the summit of the GT. CLINICAL RELEVANCE: Optimal lateral anchor positioning is 15 to 21 mm below the summit of the greater tuberosity in TOE.

The Time Out Procedure: have we changed our practice?

BACKGROUND: A preoperative surgical safety checklist was implemented into three major hospitals performing elective operations in Christchurch (New Zealand) in 2004. A prospective analysis of the results of this "Time Out Procedure" (TOP) was performed upon its implementation and 4 years later. METHODS: All members of the surgical team who participated in the TOP were recorded, as were the details of any discrepancies encountered during the TOP. The results of the initial prospective analysis from September 2004 until April 2005 (Phase 1, 10,330 procedures) were compared to a further prospective study 4 years later from October 2008 until September 2009 (Phase 2, 25,086 procedures). Surgeons' attitudes towards the TOP were analysed with a questionnaire. RESULTS: There were no wrong site operations in either phases of the study. Completion of the TOP improved in Phase 2 (98% compared to 87%, p<0.001). The overall discrepancies observed increased, (7.7% in Phase 1 and 9.3% in Phase 2, p<0.001) with surgeon being absent at the TOP resulting in 73% of the discrepancies observed. Only 86% of surgeons believed that TOP was valuable in reducing wrong site operation. CONCLUSION: This study suggests that surgical checklists such as the TOP are a useful tool in identification and prevention of wrong site surgery. Our practice with consent and limb marking has improved over the two study periods. However, there continues to be surgeon resistance to these checklists, and further research will help to identify the reasons and possible solutions to this phenomenon.

The impact of obesity on outcome after major colorectal surgery.

PURPOSE: There is an epidemic of obesity in the Western world and its associated substantial morbidity and mortality. This review examines the data on the impact of obesity on perioperative morbidity and mortality specifically in the context of colorectal surgery. METHODS: MEDLINE, PUBMED, and the Cochrane library were searched for relevant articles. A manual search for other pertinent papers also was performed. RESULTS: There is good evidence that obesity is a risk factor for wound infection after colorectal surgery. Obesity may increase the risk of wound dehiscence, incisional site herniation, and stoma complications. Obesity is linked to anastomotic leak, and obese patient undergoing rectal resections may be at particular risk. There is little data on the impact of obesity on pulmonary and cardiovascular complications after colorectal surgery. Operation times are longer for rectal procedures in obese patients, but hospital stay is not prolonged. Obese patients undergoing laparoscopic colorectal surgery are at increased risk of conversion to an open procedure. CONCLUSIONS: Obesity has a negative impact on outcome after colorectal surgery. To further clarify the impact of obesity on surgical outcome, it is recommended that future studies examine grades of obesity and include measures of abdominal obesity.