RESUMO
Metal nanoparticles (MNPs) are synthesized using various techniques on diverse substrates that significantly impact their properties. However, among the substrate materials investigated, the major challenge is the stability of MNPs due to their poor adhesion to the substrate. Herein, it is demonstrated how a newly developed H-glass can concurrently stabilize plasmonic gold nanoislands (GNIs) and offer multifunctional applications. The GNIs on the H-glass are synthesized using a simple yet, robust thermal dewetting process. The H-glass embedded with GNIs demonstrates versatility in its applications, such as i) acting as a room temperature chemiresistive gas sensor (70% response for NO2 gas); ii) serving as substrates for surface-enhanced Raman spectroscopy for the identifications of Nile blue (dye) and picric acid (explosive) analytes down to nanomolar concentrations with enhancement factors of 4.8 × 106 and 6.1 × 105 , respectively; and iii) functioning as a nonlinear optical saturable absorber with a saturation intensity of 18.36 × 1015 W m-2 at 600 nm, and the performance characteristics are on par with those of materials reported in the existing literature. This work establishes a facile strategy to develop advanced materials by depositing metal nanoislands on glass for various functional applications.
RESUMO
Lead-free halide double perovskite nanocrystals (DPNCs) are emerging materials, recently explored as potential candidates in light-emitting, photovoltaic, and other optoelectronic applications. This Letter reveals unusual photophysical phenomena and nonlinear optical (NLO) properties of Mn-doped Cs2AgInCl6 nanocrystals (NCs) via temperature-dependent photoluminescence (PL) and femtosecond Z-scan measurements. The PL emission measurements suggest that self-trapped excitons (STEs) are present, and more than one STE state is possible for this doped double perovskite. We observed enhanced NLO coefficients, owing to the improved crystallinity arising from the Mn doping. From the closed aperture Z-scan data, we have calculated two fundamental parameters, Kane energy (29â eV) and exciton reduced mass (0.22m0). We further obtained the optical limiting onset (1.84â mJ/cm2) and figure of merit as a proof-of-concept application to demonstrate the potential in optical limiting and optical switching applications. Highlighting the self-trapped excitonic emission and NLO applications, the multifunctionality of this material system is demonstrated. This investigation provides an avenue to design novel photonic and nonlinear optoelectronic devices.
Assuntos
Nanopartículas , Óxidos , Fótons , TemperaturaRESUMO
We present a simple, fast, and single-step approach for fabricating hybrid semiconductor-metal nanoentities through liquid-assisted ultrafast (â¼50 fs, 1 kHz, 800 nm) laser ablation. Femtosecond (fs) ablation of Germanium (Ge) substrate was executed in (i) distilled water (ii) silver nitrate (AgNO3-3, 5, 10 mM) (iii) Chloroauric acid (HAuCl4-3, 5, 10 mM), yielding the formation of pure Ge, hybrid Ge-silver (Ag), Ge-gold (Au) nanostructures (NSs) and nanoparticles (NPs). The morphological features and corresponding elemental compositions of Ge, Ge-Ag, and Ge-Au NSs/NPs have been conscientiously studied using different characterization techniques. Most importantly, the deposition of Ag/Au NPs on the Ge substrate and their size variation were thoroughly investigated by changing the precursor concentration. By increasing the precursor concentration (from 3 mM to 10 mM), the deposited Au NPs and Ag NPs' size on the Ge nanostructured surface was increased from â¼46 nm to â¼100 nm and from â¼43 nm to â¼70 nm, respectively. Subsequently, the as-fabricated hybrid (Ge-Au/Ge-Ag) NSs were effectively utilized to detect diverse hazardous molecules (e.g. picric acid and thiram) via the technique of surface-enhanced Raman scattering (SERS). Our findings revealed that the hybrid SERS substrates achieved at 5 mM precursor concentration of Ag (denoted as Ge-5Ag) and Au (denoted as Ge-5Au) had demonstrated superior sensitivity with the enhancement factors of â¼2.5 × 104, 1.38 × 104(for PA), and â¼9.7 × 105and 9.2 × 104(for thiram), respectively. Interestingly, the Ge-5Ag substrate has exhibited â¼10.5 times higher SERS signals than the Ge-5Au substrate.
RESUMO
Defining the ecological quality of estuaries is challenging because of the inadequacy of available methods and indices to characterise the ecosystem. In Indian estuaries, there are no scientific attempts to establish multi-metric fish index to determine the ecological status. A multi-metric fish index (EMFI) was customised for twelve predominantly open estuaries on India's western coast. The index was established at the individual estuary level to ensure uniformity and contrast from sixteen metrics that designate the fish community and diversity, composition and abundance, estuarine use and trophic integrity from 2016 to 2019. A sensitivity study was followed to measure the responses of the EMFI under different metric varying scenarios. There were seven metrics identified as the most prominent for the EMFI in metric alteration scenarios. We also deduced a composite pressure index (CPI) based on the anthropogenic pressures described for the estuaries. The ecological quality ratios (EQR) defined based on EMFI (EQRE) and the CPI (EQRP) for all the estuaries were positively correlated. The EQRE values calculated based on the regression relationship (EQRE on EQRP) showed the divisions from 0.43 (bad) to 0.71 (high) for the Indian west coast estuaries. Similarly, the standardised CPI (EQRP) values for different estuaries indicated that the values range from 0.37 to 0.61. Our results based on the EMFI suggest four estuarine systems (33%) as 'good', seven (58%) as 'moderate' and one (9%) as 'poor'. Generalised Linear Mixed Model for EQRE showed that EQRP and estuary influenced EQRE; however, the effect of year was not significant. This comprehensive study based on the EMFI is the first record for predominantly open estuaries along the Indian coast. Therefore, the EMFI established in this study could be reliably advocated as a sound, effective and composite tool of ecological quality for tropical open transitional waters.
Assuntos
Ecossistema , Estuários , Animais , Monitoramento Ambiental/métodos , Peixes , ÍndiaRESUMO
The technique of ultrafast laser ablation in liquids has evolved and matured over the past decade, with several impending applications in various fields such as sensing, catalysis, and medicine. The exceptional feature of this technique is the formation of nanoparticles (colloids) and nanostructures (solids) in a single experiment with ultrashort laser pulses. We have been working on this technique for the past few years, investigating its potential using the surface-enhanced Raman scattering (SERS) technique in hazardous materials sensing applications. Ultrafast laser-ablated substrates (solids and colloids) could detect several analyte molecules at the trace levels/mixture form, including dyes, explosives, pesticides, and biomolecules. Here, we present some of the results achieved using the targets of Ag, Au, Ag-Au, and Si. We have optimized the nanostructures (NSs) and nanoparticles (NPs) obtained (in liquids and air) using different pulse durations, wavelengths, energies, pulse shapes, and writing geometries. Thus, various NSs and NPs were tested for their efficiency in sensing numerous analyte molecules using a simple, portable Raman spectrometer. This methodology, once optimized, paves the way for on-field sensing applications. We discuss the protocols in (a) synthesizing the NPs/NSs via laser ablation, (b) characterization of NPs/NSs, and (c) their utilization in the SERS-based sensing studies.
Assuntos
Nanopartículas Metálicas , Nanoestruturas , Análise Espectral Raman/métodos , Nanopartículas Metálicas/química , Ouro/química , Prata/química , Lasers , ColoidesRESUMO
Recently, filter paper (FP)-based surface-enhanced Raman scattering (SERS) substrates have stimulated significant attention owing to their promising advantages such as being low-cost, easy to handle, and practically suitable for real-field applications in comparison to the solid-based substrates. Herein, a simple and versatile approach of laser-ablation in liquid for the fabrication of silver (Ag)-gold (Au) alloy nanoparticles (NPs). Next, the optimization of flexible base substrate (sandpaper, printing paper, and FP) and the FP the soaking time (5−60 min) was studied. Further, the optimized FP with 30 min-soaked SERS sensors were exploited to detect minuscule concentrations of pesticide (thiram-50 nM), dye (Nile blue-5 nM), and an explosive (RDX-1,3,5-Trinitroperhydro-1,3,5-triazine-100 nM) molecule. Interestingly, a prominent SERS effect was observed from the Au NPs exhibiting satisfactory reproducibility in the SERS signals over ~1 cm2 area for all of the molecules inspected with enhancement factors of ~105 and relative standard deviation values of <15%. Furthermore, traces of pesticide residues on the surface of a banana and RDX on the glass slide were swabbed with the optimized FP substrate and successfully recorded the SERS spectra using a portable Raman spectrometer. This signifies the great potential application of such low-cost, flexible substrates in the future real-life fields.
RESUMO
We report the fabrication and performance evaluation of hybrid surface-enhanced Raman scattering (SERS) substrates involving laser ablation and chemical routes for the trace-level detection of various analyte molecules. Initially, picosecond laser ablation experiments under ambient conditions were performed on pure silver (Ag) and gold (Au) substrates to achieve distinct nanosized features on the surface. The properties of the generated surface features on laser-processed portions of Ag/Au targets were systematically analyzed using UV-visible reflection and field emission scanning electron microscopy studies. Later, hybrid-SERS substrates were achieved by grafting the chemically synthesized Au nanostars on the plain and laser-processed plasmonic targets. Subsequently, we employed these as SERS platforms for the detection of a pesticide (thiram), a molecule used in explosive compositions [ammonium nitrate (AN)], and a dye molecule [Nile blue (NB)]. A comparative SERS study between the Au nanostar-decorated bare glass, silicon, Ag, Au, and laser-processed Ag and Au targets has been established. Our studies and the obtained data have unambiguously determined that laser-processed Ag structures have demonstrated reasonably good enhancements in the Raman signal intensities for distinct analytes among other substrates. Importantly, the fabricated hybrid SERS substrate of "Au nanostar-decorated laser-processed Ag" exhibited up to eight times enhancement in the SERS intensity compared to laser-processed Ag (without nanostars), as well as up to three times enhancement than the Au nanostar-loaded plain Ag substrates. Additionally, the achieved detection limits from the Au nanostar-decorated laser-processed Ag SERS substrate were â¼50 pM, â¼5 nM, and â¼5 µM for NB, thiram, and AN, respectively. The estimated enhancement factors accomplished from the Au nanostar-decorated laser-processed Ag substrate were â¼106, â¼106, and â¼104 for NB, thiram, and AN, respectively.
RESUMO
A new series of non-aqueous phthalocyanines having 3,4,5-trimethoxy phenyl group at peripheral positions in which the central cavity possessing Cu(II), Zn(II), and without metals has been synthesized, and its absorption, fluorescence (steady-state and excited state lifetimes), electrochemical, and third-order nonlinear optical (NLO) properties were evaluated. Absorption studies data suggest that all three phthalocyanines obey Beer-Lambert's law, and the redox properties indicate that both oxidation and reduction reactions are macrocyclic centered. The singlet quantum yields were measured in different solvents and were found to be in the range of 0.2-0.5 in the case of free-base, whereas it was in the range of 0.1-0.5 in zinc derivative, while the time-resolved fluorescence data revealed lifetimes of typically a few ns. The third-order NLO properties were investigated using the Z-scan technique with kilohertz (for retrieving true electronic nonlinearities) and megahertz repetition rate femtosecond pulses at 800 nm. Intensity-dependent Z-scan studies revealed robust NLO coefficients for solutions and thin films (two-photon absorption cross-sections of 9,300-57,000 GM) of these molecules suggesting a strong potential for optical switching, imaging, and optical limiting applications.