Vascular persistence following precision micropuncture.

OBJECTIVE: The success of engineered tissues continues to be limited by time to vascularization and perfusion. Recently, we described a simple microsurgical approach, termed micropuncture (MP), which could be used to rapidly vascularize an adjacently placed scaffold from the recipient macrovasculature. Here we studied the long-term persistence of the MP-induced microvasculature. METHODS: Segmental 60 µm diameter MPs were created in the recipient rat femoral artery and vein followed by coverage with a simple Type 1 collagen scaffold. The recipient vasculature and scaffold were then wrapped en bloc with a silicone sheet to isolate intrinsic vascularization. Scaffolds were harvested at 28 days post-implantation for detailed analysis, including using a novel artificial intelligence (AI) approach. RESULTS: MP scaffolds demonstrated a sustained increase of vascular density compared to internal non-MP control scaffolds (p < 0.05) secondary to increases in both vessel diameters (p < 0.05) and branch counts (p < 0.05). MP scaffolds also demonstrated statistically significant increases in red blood cell (RBC) perfused lumens. CONCLUSIONS: This study further highlights that the intrinsic MP-induced vasculature continues to persist long-term. Its combination of rapid and stable angiogenesis represents a novel surgical platform for engineered scaffold and graft perfusion.

Accelerating Patterned Vascularization Using Granular Hydrogel Scaffolds and Surgical Micropuncture.

Bulk hydrogel scaffolds are common in reconstructive surgery. They allow for the staged repair of soft tissue loss by providing a base for revascularization. Unfortunately, they are limited by both slow and random vascularization, which may manifest as treatment failure or suboptimal repair. Rapidly inducing patterned vascularization within biomaterials has profound translational implications for current clinical treatment paradigms and the scaleup of regenerative engineering platforms. To address this long-standing challenge, a novel microsurgical approach and granular hydrogel scaffold (GHS) technology are co-developed to hasten and pattern microvascular network formation. In surgical micropuncture (MP), targeted recipient blood vessels are perforated using a microneedle to accelerate cell extravasation and angiogenic outgrowth. By combining MP with an adjacent GHS with precisely tailored void space architecture, microvascular pattern formation as assessed by density, diameter, length, and intercapillary distance is rapidly guided. This work opens new translational opportunities for microvascular engineering, advancing reconstructive surgery, and regenerative medicine.

Smooth Versus Textured Tissue Expander Breast Reconstruction: Complications and Efficacy.

INTRODUCTION: Ongoing recognition of breast implant-associated anaplastic large cell lymphoma (BIA-ALCL) and its link with textured devices has brought a paradigm shift in prosthetic-based breast reconstruction. Many institutions no longer offer textured expansion devices for staged reconstruction. However, there is a paucity of data regarding the efficacy of smooth tissue expanders (TE). We hypothesized that the time to final reconstruction and complication profile between smooth and textured TEs would be similar in breast reconstruction patients. METHODS: A retrospective chart review was performed of all patients who underwent TE breast reconstruction during a 6-year period at the Penn State Hershey Medical Center. Rates of complications treated nonoperatively and those requiring reoperation were assessed. Mechanical complications, including expander malposition and rupture, were evaluated. Time to final breast reconstruction was quantified. Mixed-effects logistic regression and linear regression models, as appropriate, were used to compare textured to smooth TEs. Patient characteristics and anatomic plane placement were adjusted for in all analyses of outcomes. RESULTS: Data were collected on 389 patients, encompassing 140 smooth and 604 textured TEs. Textured devices had an increased incidence of complications treated nonsurgically (16.7% vs 10.7%; P = 0.14). However, smooth TEs had an increased incidence of reoperation (12.1% vs 7.6%; P = 0.06). Most noteworthy was that although smooth TEs had a 40-fold increase in malposition (13.6% vs 0.3%; P < 0.001), no reoperation for this complication was warranted. Further, the time to final reconstruction was comparable between the 2 devices (textured expanders: 221 days and smooth expanders: 234 days; P = 0.15). CONCLUSIONS: Staged, implant-based reconstruction is the most common surgical approach to recreate the breast mound following mastectomy. Textured TEs were the cornerstone to this approach. Unfortunately, the association between textured devices and BIA-ALCL now mandates an alternative. We postulated that smooth expanders would compare favorably for breast reconstruction. Although our study suggests that smooth TEs suffer more malposition, this has a negligible impact on the reconstructive timeline. Thus, smooth TEs may prove beneficial when considering the risk of BIA-ALCL associated with textured devices.

Intra-Operative Bioprinting of Hard, Soft, and Hard/Soft Composite Tissues for Craniomaxillofacial Reconstruction.

Reconstruction of complex craniomaxillofacial (CMF) defects is challenging due to the highly organized layering of multiple tissue types. Such compartmentalization necessitates the precise and effective use of cells and other biologics to recapitulate the native tissue anatomy. In this study, intra-operative bioprinting (IOB) of different CMF tissues, including bone, skin, and composite (hard/soft) tissues, is demonstrated directly on rats in a surgical setting. A novel extrudable osteogenic hard tissue ink is introduced, which induced substantial bone regeneration, with ≈80% bone coverage area of calvarial defects in 6 weeks. Using droplet-based bioprinting, the soft tissue ink accelerated the reconstruction of full-thickness skin defects and facilitated up to 60% wound closure in 6 days. Most importantly, the use of a hybrid IOB approach is unveiled to reconstitute hard/soft composite tissues in a stratified arrangement with controlled spatial bioink deposition conforming the shape of a new composite defect model, which resulted in ≈80% skin wound closure in 10 days and 50% bone coverage area at Week 6. The presented approach will be absolutely unique in the clinical realm of CMF defects and will have a significant impact on translating bioprinting technologies into the clinic in the future.

Induction of scaffold angiogenesis by recipient vasculature precision micropuncture.

The success of engineered tissues continues to be limited by time to vascularization and perfusion. Here, we studied the effects of precision injury to a recipient macrovasculature in promoting neovessel formation in an adjacently placed scaffold. Segmental 60 µm diameter micropunctures (MP) were created in the recipient rat femoral artery and vein followed by coverage with a simple collagen scaffold. Scaffolds were harvested at 24, 48, 72, and 96 h post-implantation for detailed analysis. Those placed on top of an MP segment showed an earlier and more robust cellular infiltration, including both endothelial cells (CD31) and macrophages (F4/80), compared to internal non-micropunctured control limbs (p < 0.05). At the 96-hour timepoint, MP scaffolds demonstrated an increase in physiologic perfusion (p < 0.003) and a 2.5-fold increase in capillary network formation (p < 0.001). These were attributed to an overall upsurge in small vessel quantity. Furthermore, MP positioned scaffolds demonstrated significant increases in many modulators of angiogenesis, including VEGFR2 and Tie-2 despite a decrease in HIF-1α at all timepoints. This study highlights a novel microsurgical approach that can be used to rapidly vascularize or inosculate contiguously placed scaffolds and grafts. Thereby, offering an easily translatable route towards the creation of thicker and more clinically relevant engineered tissues.

Computer-Aided Design and Manufacture of Intraoral Splints: A Potential Role in Cleft Care.

BACKGROUND: Nasoalveolar molding is a nonsurgical modality for the treatment of cleft lip and palate that uses an intraoral splint to align the palatal shelves. Repeated impressions are needed for splint modification, each carrying risk of airway obstruction. Computer-aided design and manufacturing (CAD/CAM) has the ability to simplify the process. As a precursor to CAD/CAM splint fabrication, a proof-of-concept study was conducted to compare three-dimensional splints printed from alginate impressions versus digital scans. We hypothesized that intraoral digital scanning would compare favorably to alginate impressions for palate registration and subsequent splint manufacture, with decreased production times. METHODS: Alginate and digital impressions were taken from 25 healthy teenage volunteers. Digital impressions were performed with a commercially available intraoral scanner. Plaster casts made from alginate impressions were converted to Standard Triangle Language files. Patient-specific matched scans were evaluated for total surface area with the concordance correlation coefficient. Acrylic palatal splints were three-dimensionally printed from inverse digital molds. Subjective appliance fit was assessed using a five-point scale. RESULTS: A total of 23 participants were included. Most subjects preferred digital impression acquisition. Impression methods showed moderate agreement (concordance correlation coefficient 0.93). Subjects rated splints from digital impressions as having a more precise fit (4.4 versus 3.9). The digital approach decreased impression phase time by over 10-fold and overall production time by 28%. CONCLUSIONS: CAD/CAM has evolved extensively over the past two decades and is now commonplace in medicine. However, its utility in cleft patients has not been fully realized. This pilot study demonstrated that CAD/CAM technologies may prove useful in patients requiring intraoral splints.

Development of Citrate-based Dual-Imaging Enabled Biodegradable Electroactive Polymers.

Increasing occurrences of degenerative diseases, defective tissues and severe cancers heighten the importance of advanced biomedical treatments, which in turn enhance the need for improved biomaterials with versatile theranostic functionalities yet using minimal design complexity. Leveraging the advantages of citrate chemistry, we developed a multifunctional citrate-based biomaterial platform with both imaging and therapeutic capabilities utilizing a facile and efficient one-pot synthesis. The resulting aniline tetramer doped biodegradable photoluminescent polymers (BPLPATs) not only possess programmable degradation profiles (<1 to >6 months) and mechanical strengths (~20 MPa to > 400 MPa), but also present a combination of intrinsic fluorescence, photoacoustic (PA) and electrical conductivity properties. BPLPAT nanoparticles are able to label cells for fluorescence imaging and perform deep tissue detection with PA imaging. Coupled with significant photothermal performance, BPLPAT nanoparticles demonstrate great potential for thermal treatment and in vivo real-time detection of cancers. Our results on BPLPAT scaffolds demonstrate three-dimensional (3D) high-spatial-resolution deep tissue PA imaging (23 mm), as well as promote growth and differentiation of PC-12 nerve cells. We envision that the biodegradable dual-imaging-enabled electroactive citrate-based biomaterial platform will expand the currently available theranostic material systems and open new avenues for diversified biomedical and biological applications via the demonstrated multi-functionality.

Transplantation of Bioprinted Tissues and Organs: Technical and Clinical Challenges and Future Perspectives.

: Three-dimensional (3D) bioprinting is a revolutionary technology in building living tissues and organs with precise anatomic control and cellular composition. Despite the great progress in bioprinting research, there has yet to be any clinical translation due to current limitations in building human-scale constructs, which are vascularized and readily implantable. In this article, we review the current limitations and challenges in 3D bioprinting, including in situ techniques, which are one of several clinical translational models to facilitate the application of this technology from bench to bedside. A detailed discussion is made on the technical barriers in the fabrication of scalable constructs that are vascularized, autologous, functional, implantable, cost-effective, and ethically feasible. Clinical considerations for implantable bioprinted tissues are further expounded toward the correction of end-stage organ dysfunction and composite tissue deficits.

Topical vanadate enhances the repair of median laparotomy incisions.

BACKGROUND: There are over two million laparotomies performed in the United States each year with an incisional hernia rate between 2% and 11%. A total of 100,000 ventral hernia repairs are undertaken each year with recurrences as high as 50%. MATERIALS AND METHODS: Full thickness midline fascia incisions from the xiphoid to the pubic symphysis were made in rats. The fascia and/or muscular layer was sutured closed and a gel with 300 µM of sodium orthovanadate or saline was placed over the suture line with the skin closed over it. On day 10, 1-cm strips from the superior, middle, and inferior regions of the abdominal wall were tested for breaking strength and processed for histology. RESULTS: The mean wound breaking strength of vanadate-treated wounds was 18.6 ± 2.7 N compared with 9.4 ± 3.6 N for controls (P < 0.0001). Similar quantities of granulation tissue were deposited in treated and control wounds. Fine green birefringence patterns, characteristic of immature connective tissue, were seen in control samples viewed with polarized light. In contrast, vanadate-treated wounds showed thick yellow-orange birefringence patterns characteristics of more mature connective tissue. Using α-smooth muscle actin immunostaining, myofibroblasts were prominent in control incisions, but few were identified in vanadate-treated incisions. CONCLUSIONS: In rat laparotomy wounds, a single application of vanadate increases wound breaking strength, through enhanced connective tissue organization. These combined data suggest topical application of vanadate immediately after fascial closure will increase wound strength, possibly reducing hernia recurrences in the repaired abdominal wall.

Posttranscriptional Modification to Modulate Progenitor Differentiation on Heterotypic Spheroids.

Cell aggregates are widely used to study heterotypic cellular interactions during the development of vascularization in vitro. In this study, we examined heterotypic cellular spheroids made of adipose-derived stem cells and CD34+/CD31- endothelial progenitor cells induced by the transfection of miR-148b mimic for de novo induction of osteogenic differentiation and miR-210 mimic for de novo induction of endotheliogenesis, respectively. The effect of the microRNA (miRs) mimic treatment group and induction time on codifferentiation was assessed in spheroids formed of transfected cells over the course of a 4-week culture. Based on gene and protein markers of osteogenic and endotheliogenic differentiation, as well as mineralization assays, our results showed that miRs directed cell differentiation and that progenitor maturity influenced the development of heterotypic cellular regions in aggregates. Overall, the success of coculture to create a prevascularized bone model is dependent on a number of factors, particularly the induction time of differentiation before combining the multiple cell types in aggregates. The approach that has been proposed could be valuable in creating vascularized bone tissue by employing spheroids as the building blocks of more complex issues through the use of cutting-edge methods such as 3D bioprinting.

Ushering in the era of regenerative surgery.

Tissue loss, irrespective of etiology, often requires extensive reconstruction. In many instances, the need exceeds what current treatments and technologies modern medicine can offer. Tissue engineering has made immense strides within the past few decades due to advances in biologics, biomaterials, and manufacturing. The convergence of these three domains has created limitless potential for future surgical care. Unfortunately, there still exists a disconnect on how to best implant these 'replacement parts' and care for the patient. It is therefore vital to develop paradigms for the integration of advanced surgical and tissue engineering technologies. This paper explores the convergence between tissue engineering and reconstructive surgery. We will describe the clinical problem of tissue loss, discuss currently available solutions, address limitations, and propose processes for integrating surgery and tissue engineering, thereby ushering in the era of regenerative surgery.

Intraoperative bioprinting of human adipose-derived stem cells and extra-cellular matrix induces hair follicle-like downgrowths and adipose tissue formation during full-thickness craniomaxillofacial skin reconstruction.

Craniomaxillofacial (CMF) reconstruction is a challenging clinical dilemma. It often necessitates skin replacement in the form of autologous graft or flap surgery, which differ from one another based on hypodermal/dermal content. Unfortunately, both approaches are plagued by scarring, poor cosmesis, inadequate restoration of native anatomy and hair, alopecia, donor site morbidity, and potential for failure. Therefore, new reconstructive approaches are warranted, and tissue engineered skin represents an exciting alternative. In this study, we demonstrated the reconstruction of CMF full-thickness skin defects using intraoperative bioprinting (IOB), which enabled the repair of defects via direct bioprinting of multiple layers of skin on immunodeficient rats in a surgical setting. Using a newly formulated patient-sourced allogenic bioink consisting of both human adipose-derived extracellular matrix (adECM) and stem cells (ADSCs), skin loss was reconstructed by precise deposition of the hypodermal and dermal components under three different sets of animal studies. adECM, even at a very low concentration such as 2 % or less, has shown to be bioprintable via droplet-based bioprinting and exhibited de novo adipogenic capabilities both in vitro and in vivo. Our findings demonstrate that the combinatorial delivery of adECM and ADSCs facilitated the reconstruction of three full-thickness skin defects, accomplishing near-complete wound closure within two weeks. More importantly, both hypodermal adipogenesis and downgrowth of hair follicle-like structures were achieved in this two-week time frame. Our approach illustrates the translational potential of using human-derived materials and IOB technologies for full-thickness skin loss.

Intraoperative Bioprinting of Human Adipose-derived Stem cells and Extra-cellular Matrix Induces Hair Follicle-Like Downgrowths and Adipose Tissue Formation during Full-thickness Craniomaxillofacial Skin Reconstruction.

Craniomaxillofacial (CMF) reconstruction is a challenging clinical dilemma. It often necessitates skin replacement in the form of autologous graft or flap surgery, which differ from one another based on hypodermal/dermal content. Unfortunately, both approaches are plagued by scarring, poor cosmesis, inadequate restoration of native anatomy and hair, alopecia, donor site morbidity, and potential for failure. Therefore, new reconstructive approaches are warranted, and tissue engineered skin represents an exciting alternative. In this study, we demonstrated the reconstruction of CMF full-thickness skin defects using intraoperative bioprinting (IOB), which enabled the repair of defects via direct bioprinting of multiple layers of skin on immunodeficient rats in a surgical setting. Using a newly formulated patient-sourced allogenic bioink consisting of both human adipose-derived extracellular matrix (adECM) and stem cells (ADSCs), skin loss was reconstructed by precise deposition of the hypodermal and dermal components under three different sets of animal studies. adECM, even at a very low concentration such as 2% or less, has shown to be bioprintable via droplet-based bioprinting and exhibited de novo adipogenic capabilities both in vitro and in vivo . Our findings demonstrate that the combinatorial delivery of adECM and ADSCs facilitated the reconstruction of three full-thickness skin defects, accomplishing near-complete wound closure within two weeks. More importantly, both hypodermal adipogenesis and downgrowth of hair follicle-like structures were achieved in this two-week time frame. Our approach illustrates the translational potential of using human-derived materials and IOB technologies for full-thickness skin loss.

Hybrid adipose graft materials synthesized from chemically modified adipose extracellular matrix.

Decellularized extracellular matrix (ECM) from tissues is a promising biomaterial that can provide a complex 3D microenvironment capable of modulating cell response and tissue regeneration. In this study, we have integrated the decellularized thiolated adipose-derived ECM, at different concentrations, with polyethylene glycol (PEG) using Michael addition between thiol and acrylate moieties. The potential for this material to support adipogenic differentiation of human adipose-derived stem cells was evaluated by encapsulating cells in hydrogels with increasing concentrations of chemically modified ECM (mECM). Our results demonstrated a positive correlation between the ECM content in the hydrogels and cell proliferation, adipogenic marker expression, and lipid formation and accumulation. Furthermore, we have shown host cell infiltration and enhanced adipogenesis in vivo after implantation. These findings support the graft as a potential alternative for adipose tissue regeneration.

Mesenchymal Stem Cell-Derived Extracellular Vesicles for Therapeutic Use and in Bioengineering Applications.

Extracellular vesicles (EVs) are small lipid bilayer-delimited particles that are naturally released from cells into body fluids, and therefore can travel and convey regulatory functions in the distal parts of the body. EVs can transmit paracrine signaling by carrying over cytokines, chemokines, growth factors, interleukins (ILs), transcription factors, and nucleic acids such as DNA, mRNAs, microRNAs, piRNAs, lncRNAs, sn/snoRNAs, mtRNAs and circRNAs; these EVs travel to predecided destinations to perform their functions. While mesenchymal stem cells (MSCs) have been shown to improve healing and facilitate treatments of various diseases, the allogenic use of these cells is often accompanied by serious adverse effects after transplantation. MSC-produced EVs are less immunogenic and can serve as an alternative to cellular therapies by transmitting signaling or delivering biomaterials to diseased areas of the body. This review article is focused on understanding the properties of EVs derived from different types of MSCs and MSC-EV-based therapeutic options. The potential of modern technologies such as 3D bioprinting to advance EV-based therapies is also discussed.

Regenerative Engineering: Current Applications and Future Perspectives.

Many pathologies, congenital defects, and traumatic injuries are untreatable by conventional pharmacologic or surgical interventions. Regenerative engineering represents an ever-growing interdisciplinary field aimed at creating biological replacements for injured tissues and dysfunctional organs. The need for bioengineered replacement parts is ubiquitous among all surgical disciplines. However, to date, clinical translation has been limited to thin, small, and/or acellular structures. Development of thicker tissues continues to be limited by vascularization and other impediments. Nevertheless, currently available materials, methods, and technologies serve as robust platforms for more complex tissue fabrication in the future. This review article highlights the current methodologies, clinical achievements, tenacious barriers, and future perspectives of regenerative engineering.

Navigating the Genomic Landscape of Human Adipose Stem Cell-Derived ß-Cells.

Diabetes is a pandemic manifested through glucose dysregulation mediated by inadequate insulin secretion by beta cells. A beta cell replacement strategy would transform the treatment paradigm from pharmacologic glucose modulation to a genuine cure. Stem cells have emerged as a potential source for beta cell (ß-cell) engineering. The detailed generation of functional ß-cells from both embryonic and induced pluripotent stem cells has recently been described. Adult stem cells, including adipose derived, may also offer a therapeutic approach, but remain ill defined. In our study, we performed an in-depth assessment of insulin-producing beta cells generated from human adipose, irrespective of donor patient age, gender, and health status. Cellular transformation was confirmed using flow cytometry and single-cell imaging. Insulin secretion was observed with glucose stimulation and abrogated following palmitate exposure, a common free fatty acid implicated in human beta cell dysfunction. We used next-generation sequencing to explore gene expression changes before and after differentiation of patient-matched samples, which revealed more than 5,000 genes enriched. Adipose-derived beta cells displayed comparable gene expression to native ß-cells. Pathway analysis demonstrated relevance to stem cell differentiation and pancreatic developmental processes, which are vital to cellular function, structural development, and regulation. We conclude that the functions associated with adipose derived beta cells are mediated through relevant changes in the transcriptome, which resemble those seen in native ß-cell morphogenesis and maturation. Therefore, they may represent a viable option for the clinical translation of stem cell-based therapies in diabetes.

Intraoperative Bioprinting: Repairing Tissues and Organs in a Surgical Setting.

3D bioprinting directly into injured sites in a surgical setting, intraoperative bioprinting (IOB), is an effective process, in which the defect information can be rapidly acquired and then repaired via bioprinting on a live subject. In patients needing tissue resection, debridement, traumatic reconstruction, or fracture repair, the ability to scan and bioprint immediately following surgical preparation of the defect site has great potential to improve the precision and efficiency of these procedures. In this opinion article, we provide the reader with current major limitations of IOB from engineering and clinical points of view, as well as possibilities of future translation of bioprinting technologies from bench to bedside, and expound our perspectives in the context of IOB of composite and vascularized tissues.

Differentiation of Adipose Tissue-Derived CD34+/CD31- Cells into Endothelial Cells In Vitro.

In this study, CD34+/CD31- progenitor cells were isolated from the stromal vascular fraction (SVF) of adipose tissue using magnetic activated cell sorting. The endothelial differentiation capability of these cells in vitro was evaluated by culturing them in vascular endothelial growth factor (VEGF) induced medium for 14 days. Viability, proliferation, differentiation and tube formation of these cells were evaluated. Cell viability study revealed that both undifferentiated and endothelial differentiated cells remained healthy for 14 days. However, the proliferation rate was higher in undifferentiated cells compared to endothelial differentiated ones. Upregulation of endothelial characteristic genes (Von Willebrand Factor (vWF) and VE Cadherin) was observed in 2D culture. However, PECAM (CD31) was only found to be upregulated after the cells had formed tube-like structures in 3D Matrigel culture. These results indicate that adipose derived CD34+/CD31- cells when cultured in VEGF induced medium, are capable differentiation into endothelial-like lineages. Tube formation of the cells started 3h after seeding the cells on Matrigel and formed more stable and connected network 24 h post seeding in presence of VEGF.

Hybrid Bioprinting of Zonally Stratified Human Articular Cartilage Using Scaffold-Free Tissue Strands as Building Blocks.

The heterogeneous and anisotropic articular cartilage is generally studied as a layered structure of "zones" with unique composition and architecture, which is difficult to recapitulate using current approaches. A novel hybrid bioprinting strategy is presented here to generate zonally stratified cartilage. Scaffold-free tissue strands (TSs) are made of human adipose-derived stem cells (ADSCs) or predifferentiated ADSCs. Cartilage TSs with predifferentiated ADSCs exhibit improved mechanical properties and upregulated expression of cartilage-specific markers at both transcription and protein levels as compared to TSs with ADSCs being differentiated in the form of strands and TSs of nontransfected ADSCs. Using the novel hybrid approach integrating new aspiration-assisted and extrusion-based bioprinting techniques, the bioprinting of zonally stratified cartilage with vertically aligned TSs at the bottom zone and horizontally aligned TSs at the superficial zone is demonstrated, in which collagen fibers are aligned with designated orientation in each zone imitating the anatomical regions and matrix orientation of native articular cartilage. In addition, mechanical testing study reveals a compression modulus of ≈1.1 MPa, which is similar to that of human articular cartilage. The prominent findings highlight the potential of this novel bioprinting approach for building biologically, mechanically, and histologically relevant cartilage for tissue engineering purposes.