RESUMO
The study aimed to prepare and characterize biodegradable sustained-release beads of letrozole (LTZ) for treating cancerous disease. The ionotropic gelation method was used for the preparation and calcium chloride (CaCl2) was used as a gelating agent, while chitosan (CTS) and sodium alginate (NaAlg) as biodegradable polymeric matrices in the blend hydrogel beads. The beads were characterized for their size, surface morphology, drug entrapment efficiency, drug-polymer interaction and crystallinity using different analytic techniques, including optical microscopy, Scanning Electron Microscopy (SEM), UV-spectroscopy, Fourier-transform Infrared Spectroscopy (FTIR), Thermo gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and X-ray Diffraction Analysis (XRD) respectively. In vitro swelling studies were also applied to observe the response of these polymeric networks against different pH (at 1.2, 6.8 and 7.4 pH). The results from TGA and DSC exhibited that the components in the formulation possess better thermal stability. The XRD of polymeric networks displays a minor crystalline and significant amorphous nature. The SEM micrographs revealed that polymeric networks have uneven surfaces and grooves. Better swelling and in vitro outcomes were achieved at a high pH (6.8,7.4), which endorsed the pH-responsive characteristics of the prepared beads. Hence, beads based on chitosan and sodium alginate were successfully synthesized and can be used for the controlled release of letrozole.
Assuntos
Quitosana , Preparações de Ação Retardada , Letrozol , Quitosana/química , Tamanho da Partícula , Polímeros , Alginatos/química , Espectroscopia de Infravermelho com Transformada de Fourier , Ácidos Hexurônicos/química , Microscopia Eletrônica de Varredura , Ácido Glucurônico/químicaRESUMO
Sumatriptan succinate and prochlorperazine maleate are a clinically proven combination for treating migraine and associated nausea and vomiting. Classical oral dosage forms are not frequently workable in migraine because of the associated nausea/vomiting, and no effective fixed dose combination is available. Thus, the aim of the study was to optimize a combined sumatriptan-prochlorperazine orodispersible film for rapid release of drugs. Orodispersible films were prepared by solvent casting method using varied amounts of polyvinyl alcohol and glycerol as film former and plasticizer, respectively, along with fixed levels of other ingredients employing central composite design. The optimum film (VF) demonstrated disintegration and total dispersion times as 21 s and 2.3 min, respectively. Tensile strength and Young's modulus were 8.86 ± 0.37 MPa and 24.15 ± 0.07 MPa, respectively. The in vitro T80% of both drugs from the ODF was achieved within 4 min. The film was palatable and disintegrated in 2 min in buccal cavity of human volunteers. Permeation study through goat mucosa demonstrated 100% permeation of both drugs within 15 min. X-Ray diffraction and differential scanning calorimetry supported drugs being amorphous and Fourier transform infrared demonstrated drug-excipient compatibility in optimized film. A judicious combination of sumatriptan succinate and prochlorperazine maleate could be prepared in orodispersible films for the possible relief of migraine.
Assuntos
Transtornos de Enxaqueca , Sumatriptana , Excipientes/química , Humanos , Náusea , Proclorperazina , VômitoRESUMO
BACKGROUND: In Pakistan, drug promotion practices, ethical or unethical, have rarely been in the spotlight. We aimed to assess the perception and barriers of medical representatives (MRs) and doctors (MDs) regarding ethical promotion of pharmaceuticals in Pakistan. METHODS: A cross sectional survey was conducted in seven major cities of Pakistan for 6-months period. Self-administered questionnaire was used for data collection. Logistic regression and five-point Likert scale scoring was used to estimate the perceptions and barriers. RESULTS: Compared to national companies (NCs), the medical representatives (MRs) of multinational companies (MNCs) strongly believed that their companies follow World Health Organization (WHO) (OR; 5.31, p = 0.0005), International Federation of Pharmaceutical Manufacturers & Associations (IFPMA) (OR; 6.45, p = 0.0005) and national codes of ethics (OR; 5.84, p = 0.0005). MNCs trained their MRs (OR; 6.68, p = 0.0005), provide accurate and valid scientific data (OR; 4.01, p = 0.007) with adequate system of accountability and controls on product samples (OR; 1.96, p = 0.047), while, NCs sponsor social or entertainment activities, seminars and conferences, and all sort of facilitation in form of gifts of their choice and clinic renovation for medical doctors (MDs). MDs perceptions were similar to MRs mentioned above, yet strongly agreed that companies offer cash payments or equivalents to MDs. The MRs of NCs/MNCs and MDs agreed/strongly agreed that no external accountability, profiteering, pressure on sale targets, job insecurity, condoning unethical promotion by high-ups' and business promotion by junior MDs were the predominant barriers. CONCLUSION: In conclusion, MRs of MNCs and MDs believed that MNCs follow certain codes of ethics in the promotion of pharmaceuticals, while NCs tend to be more profit oriented and even condone unethical promotion. All stakeholders, MRs, MDs and companies, might pose certain barriers, intentionally or unintentionally, in ethical promotion.
Assuntos
Indústria Farmacêutica , Preparações Farmacêuticas , Estudos Transversais , Humanos , Paquistão , PercepçãoRESUMO
Gingivitis is a condition that needs sustained concentration of antibiotic locally over extended period of time. The current study aimed to formulate and evaluate the sustained and localized release of metronidazole (MTZ) as mucoadhesive buccal tablet containing hydroxypropylmethyl cellulose (HPMC), Carbopol 940® (CP), carboxymethylcellulose (CMC) and ethyl cellulose (EC) as mucoadhesive polymers. Tablets were directly compressed with proportions of polymeric blends (F1-F16). The results indicated that weight variation (249±2.10mg) and friability (0.21%) were within USP compendial limits. Maximum mucoadhesive strength and time were depicted by F1 and F14 which were 28.47g and 12hr respectively. Formulations, except F4, were within physiological pH limit. Maximum swellability index (261.9%) was exhibited by F16, at 8 hr, containing highest concentration of CP, HPMC and additional CMC. For in vitro release, the pre-set 8 hr complete release were shown by formulations, F15 and F16 which were 100% and 97%, respectively. Genetic algorithm was applied on the attributes to optimize polymeric response in accordance with desirability. The software predicted composition (F17) was tested which revealed that physical characteristics were in accordance with the compendial standards. The release kinetics, evaluated through DDsolverâ, suggested that release of MTZ followed non-Fickian diffusion type in Korsmeyer-Peppas model. Therefore, MTZ, if delivered as mucoadhesive buccal formulation (F17) containing amounts (mg) of CP (16.4), HPMC (78.7), CMC (8.3) and EC (10.5) will simulate satisfactory release i.e. 96% at 8 hr in simulated buccal fluid.
Assuntos
Antibacterianos/química , Inteligência Artificial , Gengivite/tratamento farmacológico , Metronidazol/química , Polímeros/química , Adesividade , Administração Bucal , Antibacterianos/administração & dosagem , Preparações de Ação Retardada , Difusão , Composição de Medicamentos , Liberação Controlada de Fármacos , Gengivite/microbiologia , Concentração de Íons de Hidrogênio , Cinética , Metronidazol/administração & dosagem , ComprimidosRESUMO
To achieve remotely directed delivery of anticancer drugs, surface-decorated nanoparticles with ligands are reported. In this study, folic acid- and thiol-decorated chitosan nanoparticles loaded with docetaxel (DTX-NPs) were prepared for enhanced cellular internalization in cancer cells and improved oral absorption. The DTX-NPs were explored through in vitro and in vivo parameters for various parameters. The DTX-NPs were found to be monodisperse nanoparticles with an average particle size of 158.50 ± 0.36 nm, a polydispersity index of 0.36 ± 0.0, a zeta potential of + 18.30 ± 2.52 mV, and an encapsulation efficiency of 71.47 ± 5.62%. The drug release from DTX-NPs followed the Korsmeyer-Peppas model with about 78% of drug release in 12 h. In in vitro cytotoxicity studies against folate receptor, positive MDA-MBB-231 cancerous cells showed improved cytotoxicity with IC50 of 0.58 µg/mL, which is significantly lower as compared to docetaxel (DTX). Ex vivo permeation enhancement showed an efflux ratio of 0.99 indicating successful transport across the intestine. Oral bioavailability was significantly improved as Cmax and AUC were higher than DTX suspension. Overall, the results suggest that DTX-NPs can be explored as a promising carrier for oral drug delivery.
Assuntos
Antineoplásicos/química , Quitosana/química , Docetaxel/química , Sistemas de Liberação de Medicamentos , Ácido Fólico/química , Nanopartículas/química , Administração Oral , Animais , Disponibilidade Biológica , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Docetaxel/farmacocinética , Docetaxel/farmacologia , Humanos , Coelhos , Ratos , Compostos de Sulfidrila/químicaRESUMO
BACKGROUND: Poorly water-soluble drugs do not dissolve well in aqueous-based gastrointestinal fluid; therefore, they are not well absorbed. Thus, employing a suitable solubility enhancing technique is necessary for such a drug. Drug/HPßCD complexation is a promising way to improve solubility and dissolution of a poorly water-soluble drug. Levodropropizine was used as a model drug in this study. OBJECTIVES: The purpose of this research was to enhance the aqueous solubility and dissolution rate of levodropropizine by employing the inclusion complexation technique. MATERIAL AND METHODS: A microparticle formulation was prepared from levodropropizine and hydroxypropyl-ß-cyclodextrin (HPßCD) in a 1:1 molar ratio through the spray-drying technique. The host-guest relationship between levodropropizine and HPßCD was also investigated using the molecular docking computational methodology. The aqueous solubility and dissolution rate of levodropropizine in formulations were assessed and compared with those of the drug alone. X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR) were applied for the solid-state characterization of the prepared samples. RESULTS: According to the research outcomes, the levodropropizine/HPßCD formulation had enhanced the aqueous solubility (351.12 ±13.26 vs 92.76 ±5.00 mg/mL) and dissolution rate (97.83 ±3.36 vs 3.12 ±1.76% in 10 min) of levodropropizine, compared to the plain drug powder. The levodropropizine/ HPßCD formulation had converted the crystalline drug into its amorphous counterpart. Furthermore, no covalent interaction was found to exist between levodropropizine and HPßCD. The spray-dried particles were discrete. Each particle had a shriveled appearance. CONCLUSIONS: The levodropropizine/HPßCD formulation is, therefore, recommended for the more effective administration of levodropropizine through the oral route.
Assuntos
Propilenoglicóis , beta-Ciclodextrinas , 2-Hidroxipropil-beta-Ciclodextrina , Varredura Diferencial de Calorimetria , Microscopia Eletrônica de Varredura , Simulação de Acoplamento Molecular , Propilenoglicóis/química , Propilenoglicóis/farmacologia , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier , beta-Ciclodextrinas/química , beta-Ciclodextrinas/farmacologiaRESUMO
The ability of ethosomes to entrap capsaicin was evaluated using four methods of preparation that are; hot method, cold method, classic method and injection method. The ethosomes were prepared, optimized and characterized with the aim to identify a technique best suitable for their formulation. Vesicle shape, size and entrapment efficiency was determined by scanning electron microscopy, dynamic light scattering and ultracentrifugation techniques, respectively. Vesicle sizes varied from an average of 15nm - 400nm depending on the concentrations of phospholipid, ethanol and method of preparation. The formulations demonstrated entrapment efficiency of 29-81% with maximum entrapment obtained in formulations prepared with hot method having high concentration of ethanol. The homogeneity index was measured with Zetasizer that showed formulation prepared with hot method to be more uniform in size distribution having PDI 0.162 while injection method of preparation yielded a moderately broad polydispersity of vesicles (0.276). Physical stability assessment done by storing the selected formulation samples at 4°C and 25°C indicated the refrigerator temperature to be the best for retention of drug in ethosomal vesicles. All formulations kept in refrigerator adequately retained capsaicin during the two months of stability studies while those at ambient temperature noticeably showed leaked drug from vesicles. FTIR analysis showed capsaicin and phospholipid to be compatible with each other with no sign of interaction. DSC studies evidently showed lowering of transition temperature of phospholipid from 327.13°C to 111.63°C in ethosomal formulation due to the presence of ethanol. It was concluded that capsaicin ethosomes can be successfully prepared to employ four different methods and their characterization parameters indicate hot method to be effective for preparation of nano-sized uniform, homogeneous and stable capsaicin ethosomes.
Assuntos
Capsaicina/química , Química Farmacêutica/métodos , Sistemas de Liberação de Medicamentos/métodos , Lipossomos/química , Microscopia Eletrônica de Varredura/métodos , Tamanho da Partícula , Fosfolipídeos/química , TemperaturaRESUMO
The current study was designed to evaluate mucoadhesive buccal tablet containing metronidazole (MTZ) for local action aided by Hydroxypropylmethylcellulose K4M (HPMC) and Carbopol 940® (CP) as mucoadhesive polymers with other ingredients like sodium starch glycolate (SSG), polyvinyl pyrollidone K30 (PVP) as disintegrant and binders respectively. Formulations (F1-F8) were prepared by direct compression method and characterized for different physicochemical parameters. Results showed that the average weight and friability were within USP limits. Maximum mucoadhesive time was observed for F2 (14 hr) containing moderate amount of HPMC and CP used in the study. Up most mucoadhesive strength value was observed with F3 containing highest amount of HPMC used. Results indicated that high amount of HPMC was linked with the moderate to higher mucoadhesive strength and time. Maximum swelling index was observed in F7 (191.3%). Only F1-F3 showed complete in vitro MTZ release within 3 hr. Formulations containing PVP released MTZ incompletely over time while SSG released earlier. Formulation F1 was considered best in terms of MTZ release (100.5%) with diffusion based Korsmeyer-Peppas release kinetics. Therefore, MTZ exhibiting best physicochemical characters in mucoadhesive buccal tablet was found in F1 containing HPMC and CP in amounts of 37.5 mg and 25 mg, respectively, for local action.
Assuntos
Anti-Infecciosos/química , Desenvolvimento de Medicamentos/métodos , Gengivite , Metronidazol/química , Mucosa Bucal , Periodontite , Adesividade , Anti-Infecciosos/administração & dosagem , Anti-Infecciosos/análise , Gengivite/tratamento farmacológico , Gengivite/microbiologia , Humanos , Derivados da Hipromelose/administração & dosagem , Derivados da Hipromelose/análise , Derivados da Hipromelose/química , Metronidazol/administração & dosagem , Metronidazol/análise , Mucosa Bucal/efeitos dos fármacos , Mucosa Bucal/microbiologia , Periodontite/tratamento farmacológico , Periodontite/microbiologia , ComprimidosRESUMO
The liquid and semisolid matrix technology, filling liquids, semi-solids and gels in hard gelatin capsule are promising, thus, there is a need of enhanced research interest in the technology. Therefore, the present study was aimed to investigate isoniazid (freely soluble) and metronidazole (slightly soluble) gels filled in hard gelatin capsules for the effect of poloxamers of different viscosities on release of the drugs. Gel of each drug (10% w/w, particle size 180-250 µm), prepared by mixing poloxamer and 8% w/w hydrophilic silicon dioxide (Aerosil® A200), was assessed for rheology, dispersion stability and release profile. Both the drugs remained dispersed in majority of gels for more than 30 days, and dispersions were depended on gels' viscosity, which was further depended on viscosity of poloxamers. A small change in viscosity was noted in gels on storage. FTIR spectra indicated no interactions between components of the gels. The gels exhibited thixotropic and shear-thinning behaviour, which were suitable for filling in hard gelatin capsules without any leakage from the capsules. The release of both drugs from the phase-stable gels for 30 days followed first-order kinetics and was found to be correlated to drugs' solubility, poloxamers' viscosity, polyoxyethylene contents and proportion of block copolymer (poloxamers) in the gels. The findings of the present study indicated that release of drugs of different solubilities (isoniazid and metronidazole) might be modified from gels using different poloxamers and Aerosil® A200.
Assuntos
Gelatina/farmacocinética , Poloxâmero/farmacocinética , Reologia/métodos , Dióxido de Silício/farmacocinética , Cápsulas , Gelatina/química , Géis , Tamanho da Partícula , Poloxâmero/química , Dióxido de Silício/química , Solubilidade , ViscosidadeRESUMO
Irrational drug use practices are a burden to healthcare facilities. Poor prescribing practices affect the overall management and cost of treatment of non-communicable diseases that are the major cause of mortality and morbidity worldwide. In an effort to improve prescribing practices, this study was designed to assess prescribing, consultation and facility indicators in healthcare facilities of Punjab and Sindh provinces of Pakistan from December 2012 to December 2013. In this cross-sectional study, random and convenient sampling were used to collected data from both private and public healthcare facilities. Quantitative data were collected using structured questionnaire, observations and prescription analysis, whereas qualitative information on factors influencing prescribing practices was obtained by interviewing medical practitioners. A total of 13693 prescriptions were obtained from 500 patient-prescriber encounters. Results show that history taking, physical examination and diagnoses were adequate while generic prescribing was four-fold less than drugs prescribed by brands. Average number of drugs prescribed was 4.63 with more prescribing tendency in private facilities. 45.07% prescription costs were less than Rs. 150. Sulfonylureas, statins and ACE inhibitors were highly prescribed drugs for diabetes, hyperlipidemia and hypertension. Prescribing practices were dominantly influenced by severity of disease (73% Punjab; 81% Sindh), patient age (75% Punjab; 68% Sindh) and availability of drugs (62% Punjab; 56% Sindh) whereby 91% practitioners in Sindh and 52% in Punjab rely on medical representatives as the source of drug information. Moreover, the pharmacy and therapeutic committees in all facilities were non-functional along with non-availability of essential drug list in 87% health facilities. Thus, there are considerable opportunities to improve the rational use of medicines in Pakistan including low prices for generics, physician education, prescribing guidelines and formularies.
Assuntos
Tratamento Farmacológico/estatística & dados numéricos , Prescrição Inadequada/estatística & dados numéricos , Adulto , Idoso , Estudos Transversais , Uso de Medicamentos , Medicamentos Genéricos , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Paquistão , Assistência Farmacêutica , Adulto JovemRESUMO
Alendronate sodium, a bisphosphonate drug, it is used to treat osteoporosis and other bone diseases. The present study was designed to conduct comparative bioavailability analysis of oral formulations of aledronate sodium through an open-label, randomized, 2-sequence, 2-period crossover study. Healthy adult male Pakistani volunteers received a single 70 mg dose of the test or reference formulation of alendronate sodium followed by a 7 day washout period. Plasma drug concentrations were determined using a validated HPLC post column fluorescence derivatization method. AUC(01,) AUC(0-8,) C(max). and T(max) were determined by non-compartmental analysis and were found within the permitted range of 80% to 125% set by the US Food and Drug Administration (FDA). Results show that both in vitio and in vivo assays of all test brands were within the spec- ification of the US Pharmacopoeial limits and were statistically bioequivalent. No adverse events were reported in this study.
Assuntos
Alendronato/farmacocinética , Conservadores da Densidade Óssea/farmacocinética , Administração Oral , Adulto , Alendronato/administração & dosagem , Área Sob a Curva , Disponibilidade Biológica , Estudos Cross-Over , Composição de Medicamentos , Humanos , MasculinoRESUMO
The microbial and chemical analysis of illicit drug samples from different areas of Pakistan i.e. Quetta, Karachi, Lahore and Islamabad was conducted in a cross-sectional study at National Institute of Health, Islamabad. The drug samples were confiscated by Anti Narcotics Force (ANF), Pakistan. Microbial analysis was done by estimating bioburden which revealed the presence of gram negative and positive bacteria's, fungus, Streptococcus, Staphylococcus species. Trypton soya agar was used for total aerobic count, MacConkey agar for gram-negative bacteria, Sabouraud dextrose agar for fungus and Vogel-Johnson agar for Streptococcus and Staphylococcus species. Colour tests were applied to identify the drug samples. Qualitative and quantitative analysis of suspected samples of Heroin, morphine, cocaine and acetic anhydride was made by employing different chromatographic techniques i.e. Thin-layer chromatography (TLC) and High-performance liquid chromatography (HPLC). The samples were found to be adulterated with paracetamol, diazepam and Dextromethorphen. Acetic anhydride was adulterated with hydrochloric acid (HCl). There is lack of information providing structured advice on responses to the consequences of illicit drug adulteration. Robust and rehearsed interventions and communication strategies would provide a basis for response for a wide variety of organisations. Research into the usefulness of media warnings about adulteration of illicit drugs is required.
Assuntos
Bactérias/isolamento & purificação , Contaminação de Medicamentos , Tráfico de Drogas , Fungos/isolamento & purificação , Drogas Ilícitas/análise , Técnicas Bacteriológicas , Cromatografia Líquida de Alta Pressão , Cromatografia em Camada Fina , Estudos Transversais , Humanos , Drogas Ilícitas/efeitos adversos , Paquistão , Medição de RiscoRESUMO
Present investigation concern with combination of two drugs for the treatment of gout. One of these drug (naproxen sodium) is pain killer which is sustain their action within the body for 12 hours and the other drug (colchicine) is anti-gout, which release as conventional dosage. After oral administration naproxen will act as sustain release dosage and increase patient compliance about six batches of tablet were developed and evaluate .For the sustain release action polymers Methocel K4M and HPMCK15were used. These polymers were used in combination used with other inactive ingredients. Two methods were used for proration of final tablets. In 1st method only naproxen sodium granules were prepared which are sustained released. In second method these granules were mixed with colchicines powder and other all inactive ingredients. This method is easy and cost effective characterization of pallets and final tablets were performed. Final tablets were evaluated for all tests like appearance, friability, dissolution, hardness, assay, weight variation and in-vitro release study performed. The results obtained were satisfactory and complies with USP specification. Formulation containing combination of Methocel K4M and HPMC K15 showed good sustain release profile for 12 hours.
Assuntos
Colchicina/química , Supressores da Gota/química , Naproxeno/química , Administração Oral , Colchicina/administração & dosagem , Preparações de Ação Retardada , Combinação de Medicamentos , Composição de Medicamentos , Estabilidade de Medicamentos , Supressores da Gota/administração & dosagem , Derivados da Hipromelose/química , Cinética , Modelos Químicos , Naproxeno/administração & dosagem , Solubilidade , Comprimidos , Água/químicaRESUMO
Background: Ulcerative colitis is a chronic immune-mediated inflammatory bowel disease that involves inflammation and ulcers of the colon and rectum. To date, no definite cure for this disease is available. Objective: The objective of the current study was to assess the effect of Calliandra haematocephala on inflammatory mediators and oxidative stress markers for the exploration of its anti-ulcerative colitis activity in rat models of acetic acid-induced ulcerative colitis. Methods: Methanolic and n-hexane extracts of areal parts of the plant were prepared by cold extraction method. Phytochemical analysis of both extracts was performed by qualitative analysis, quantitative methods, and high-performance liquid chromatography (HPLC). Prednisone at 2 mg/kg dose and plant extracts at 250, 500, and 750 mg/kg doses were given to Wistar rats for 11 days, which were given acetic acid on 8th day through the trans-rectal route for the induction of ulcerative colitis. A comparison of treatment groups was done with a normal control group and a colitis control group. To evaluate the anti-ulcerative colitis activity of Calliandra haematocephala, different parameters such as colon macroscopic damage, ulcer index, oxidative stress markers, histopathological examination, and mRNA expression of pro and anti-inflammatory mediators were evaluated. mRNA expression analysis was carried out by reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR). Results: The phytochemical evaluation revealed polyphenols, flavonoids, tannins, alkaloids, and sterols in both extracts of the plant. Results of the present study exhibited that both extracts attenuated the large bowel inflammation and prevented colon ulceration at all tested doses. Macroscopic damage and ulcer scoreswere significantly decreased by both extracts. Malondialdehyde (MDA) levels and nitrite/nitrate concentrations in colon tissues were returned to normal levels while superoxide dismutase (SOD) activity was significantly improved by all doses. Histopathological examination exhibited that both extracts prevented the inflammatory changes, cellular infiltration, and colon thickening. Gene expression analysis by RT-qPCR revealed the downregulation of pro-inflammatory markers such as tumor necrosis factor-alpha (TNF-α) and cyclooxygenase-2 (COX-2) whereas the anti-inflammatory cytokines including Interleukin-4 (IL-4) and Interleukin-10 (IL-10) were found to be upregulated in treated rats. Conclusion: It was concluded based on study outcomes that methanolic and n-hexane extracts of Calliandra haematocephala exhibited anti-ulcerative colitis activity through modulation of antioxidant defense mechanisms and the immune system. In this context, C. haematocephala can be considered as a potential therapeutic approach for cure of ulcerative colitis after bioassay-directed isolation of bioactive phytochemicals and clinical evaluation.
RESUMO
In the original publication, a mistake was observed in Figure 5 as published [...].
RESUMO
Plant mucilages are commonly employed as excipients in pharmaceutical manufacturing. Ocimum basilicum (Lamiaceae family), a source of hydrophilic mucilage referred herein as Ocicum, was evaluated for the solubility enhancer of a model drug, aceclofenac, in solid dispersions prepared using different methods. Polymer was extracted from O. basilicum and solid dispersions of aceclofenac were fabricated with Ocicum or Poloxamer 407 using polymer-to-drug ratios of 1:1, 1:2 and 1:3 utilizing solvent evaporation, lyophilization and melt methods. Ocicum was evaluated for its safety via acute toxicity study including different biochemical and hematological parameters including liver and kidney profiles. Moreover, different characterization studies including melting-point, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and differential thermal analysis (TGA) were used for evaluation of polymer and solid dispersions. Furthermore, solubility and dissolution studies were performed to confirm solubility enhancement. Ocicum was found to be safer, and different characterization studies confirmed the purity of the compounds. In addition, Ocicum exhibited up to 6.27-fold enhanced solubility as compared to pure aceclofenac; similarly, 4.51-fold increased solubility by the synthetic polymer in their respective solid dispersions was shown. Furthermore, Ocicum-based solid dispersions showed substantial improvement in dissolution of aceclofenac. Therefore, it can be concluded from the above-mentioned results that Ocicum might be used as an economical natural oral delivery carrier alternative to the synthetic polymers.
RESUMO
The aim of the projected study was to design and develop a novel strategy for evaluating the mucoadhesive potential of polymeric tablets of dexamethasone (DXM) for local delivery against wounds. Therefore, formulations (Q1-Q7) were synthesized via direct compression method by varying the concentrations of polymers, i.e., ethyl cellulose (EC) and agar extract (AG). Moreover, the mucoadhesive polymeric tablets were characterized via physicochemical, in vitro, ex vivo and in vivo experiments. However, physicochemical characteristics such as FTIR showed no interaction with different polymeric combination. Surface pH of all formulations was normal to slightly alkaline. Highest hydration of up to 6.22% and swelling index was comprehended with maximum concentration of AG (50% of total tablet weight). Whereas, ex vivo and in vivo residence time and mucoadhesion were attributed to the increased concentrations of polymers. Moreover, Q7, (optimized formulation), containing 10% of EC and 40% of AG, exhibited maximum release of DXM (100%) over 8 h, along with sufficient mucoadhesive strength up to 11.73 g, following first-order kinetics having r2 value of 0.9778. Hemostatic effects and epithelialization for triggering and promoting wound healing were highly pronounced in cases of Q7. Furthermore, in vivo residence time was 7.84 h followed by salivary drug concentration (4.2 µg/mL). However, mucoadhesive buccal tablets showed stability for 6 months, thus following the standardization (ICH-Iva) stability zone. In summary, DXM mucoadhesive tablets seem to be an ideal candidate for eradication of wound infections via local targeted delivery.
RESUMO
INTRODUCTION: Liquid Semisolid Matrix (LSSM) technology involves the filling of drugmixed gel in hard gelatin capsules for different applications. METHODS: In continuation of our previous work on LSSM technology, 10% (w/w) of practically insoluble model drug, mefenamic acid was incorporated in gels of different poloxamers with 8% (w/w) SiO2. RESULTS: Gels exhibited plasticity or pseudoplasticity along thixotropy at 2 and 24 h enabling their easy filling into hard gelatin capsules without content seepage. Mefenamic acid gels prepared with L64 and L92 maintained their apparent viscosities for the study period of one month. Around 100% mefenamic acid was released within 90 min from L64- and in 150 min from L92-SiO2 gels, both with first-order kinetics. In 12 month long-term stability studies, only mefenamic acid-L64- SiO gel at 30°C/65% RH indicated dispersion stability with similar rheology and release pattern to that at 2, 24 and 30 days. No chemical drug-polymer interactions were found in FTIR. CONCLUSION: The release of practically insoluble mefenamic acid could be enhanced from gel formulated with L64 and SiO2.
Assuntos
Ácido Mefenâmico , Poloxâmero , Cápsulas , Gelatina/química , Géis/química , Ácido Mefenâmico/química , Poloxâmero/química , Reologia , Sílica Gel , Dióxido de Silício , TecnologiaRESUMO
The aim of the proposed study is to develop a mucoadhesive buccal delivery system for the sustained delivery of metformin (MET) and sitagliptin (SIT) against diabetes mellitus (DM) with improved bioavailability. Polymeric blend of Carbopol® 940 (CP), agarose (AG) or polyvinylpyrrolidone K30 (PVP) as mucoadhesive agents in formulations (R1-R15) were compressed via the direct compression technique. Tablets were characterized for solid state studies, physicochemical and in vivo mucoadhesion studies in healthy volunteers. Outcomes did not reveal any unusual peak or interaction between the drugs and polymers in the physical mixture through Fourier Transform Infrared Spectroscopy (FTIR) and DSC analysis. The mucoadhesive blend of CP and PVP was superior compared to other blends. The formulation R4 revealed exorbitant loading of drugs with complete drug release for 6 h with ex vivo mucoadhesive strength and time of 26.99 g and 8.1 h, respectively. It was further scrutinized to evaluate it as an optimized formulation where it was found to be stable for up to 6 months. The formulation R4 depicted Korsmeyer-Peppas model and first-order mode of release correspondingly for SIT and MET. Moreover, it showed hemocompatibility, biocompatibility and stability with non-significant changes in the dissolution profile. Overall, the CP blend with PVP was found appropriate to yield the desired release coupled with the optimized mucoadhesive properties of the buccal tablets, ensuring sufficient pharmaceutical stability.
RESUMO
The study was aimed to improve the aqueous solubility of atorvastatin (AT) and ameliorate permeability of metformin (MT) in a combination formulation, improving their oral bioavailability. Several AT-MT loaded polyvinylpyrrolidone (PVP) and hyaluronic acid (HA) based nanoparticles were prepared through electrospraying method (ES-NPs), and tested for physicochemical, in vitro, and in vivo parameters. Among the trialed formulations, a sample consisting of AT, MT, PVP, and HA at the weight ratio of 1/6.25/3.75/15 furnished the most satisfying solubility and release rate results. It enhanced approximately 10.3-fold and 3.6-fold solubility of AT as compared with AT powder and marketed product (Lipilow) in phosphate buffer pH = 6.8, respectively. Whereas, permeation of MT was 1.60-fold and 1.47-fold improved as compared with MT powder and marketed product (Glucophage), respectively. As compared with Lipilow, AUC (0-∞) and Cmax of AT with ES-NPs in rats were improved to 3.6-fold and 3.2-fold, respectively. Similarly, as compared with Glucophage, AUC (0-∞) and Cmax of MT were improved to 2.3-fold and 1.8-fold, respectively. Thus, ES-NPs significantly enhanced the solubility of AT (a BCS class II drug) and permeability of MT (a BCS class III drug) and might be a promising drug delivery system for co-delivery of these drugs.