Controlling Swing Rates in Macrocyclic Molecular Mortise Hinges.

Hinge motion is observed in macrocyclic, mortise-type molecular hinges using variable temperature NMR spectroscopy. The data is consistent with dynamic hinging from a folded-to-extended-to-folded enantiomeric state. Crystallographic and solution structures of the folded states are reported. Chemical shift predictions derived from crystallographic data corroborate fully revolute hinge motion. The rate of hinging is affected by steric congestion at the hinge axis. A macrocycle containing glycine, 1, hinges faster than one comprising aminoisobutyric acid, 2. The free energies of activation, ΔG≠ , for 1 and 2 were determined to be 13.3±0.3 kcal/mol and 16.3±0.3 kcal/mol, respectively. This barrier is largely independent of solvent across those surveyed (CD3 OD, CD3 CN, DMSO-d6 , pyridine-d5 , D2 O). Experiment and computation predict energy barriers that are consistent with disruption of an intramolecular network of hydrogen bonds. DFT calculations reveal a pathway for hinge motion.

A Model for the Rapid Assessment of Solution Structures for 24-Atom Macrocycles: The Impact of ß-Branched Amino Acids on Conformation.

Experiment and computation are used to develop a model to rapidly predict solution structures of macrocycles sharing the same Murcko framework. These 24-atom triazine macrocycles result from the quantitative dimerization of identical monomers presenting a hydrazine group and an acetal tethered to an amino acid linker. Monomers comprising glycine and the ß-branched amino acids threonine, valine, and isoleucine yield macrocycles G-G, T-T, V-V, and I-I, respectively. Elements common to all members of the framework include the efficiency of macrocyclization (quantitative), the solution- and solid-state structures (folded), the site of protonation (opposite the auxiliary dimethylamine group), the geometry of the hydrazone (E), the C2 symmetry of the subunits (conserved), and the rotamer state adopted. In aggregate, the data reveal metrics predictive of the three-dimensional solution structure that derive from the fingerprint region of the 1D 1H spectrum and a network of rOes from a single resonance. The metrics also afford delineation of more nuanced structural features that allow subpopulations to be identified among the members of the framework. Well-tempered metadynamics provides free energy surfaces and population distributions of these macrocycles. The areas of the free energy surface decrease with increasing steric bulk (G-G > V-V ∼ T-T > I-I). In addition, the surfaces are increasingly isoenergetic with decreasing steric bulk (G-G > V-V ∼ T-T > I-I).

A High-Performance Single-Molecule Magnet Utilizing Dianionic Aminoborolide Ligands.

The first example of a homoleptic f-block borolide sandwich complex is presented and shown to be a high-performance single-molecule magnet (SMM). The bis(borolide) complex [K(2.2.2)][[1-(piperidino)-2,3,4,5-tetraphenylborolyl]2Dy] (1) features an unusual example of an anionic Ln3+ metallocene that supports short metal-ligand bonds and a high degree of linearity around the central Dy3+ ion, resulting in comparatively large barriers to magnetization reversal (Ueff = 1600 cm-1 for the most linear orientation) and, importantly, a high blocking temperature (TB, defined as T(τ100s)) of 66 K. These metrics put complex 1 among the very best performing SMMs reported to date and highlight the potential of dianionic borolide ligands to increase ligand field axiality, compared to monoanionic cyclic ligands, to ultimately maximize magnetic anisotropy in f-block-based SMMs.

Nitrogen Atom Transfer Catalysis by Metallonitrene C-H Insertion: Photocatalytic Amidation of Aldehydes.

C-H amination and amidation by catalytic nitrene transfer are well-established and typically proceed via electrophilic attack of nitrenoid intermediates. In contrast, the insertion of (formal) terminal nitride ligands into C-H bonds is much less developed and catalytic nitrogen atom transfer remains unknown. We here report the synthesis of a formal terminal nitride complex of palladium. Photocrystallographic, magnetic, and computational characterization support the assignment as an authentic metallonitrene (Pd-N) with a diradical nitrogen ligand that is singly bonded to PdII . Despite the subvalent nitrene character, selective C-H insertion with aldehydes follows nucleophilic selectivity. Transamidation of the benzamide product is enabled by reaction with N3 SiMe3 . Based on these results, a photocatalytic protocol for aldehyde C-H trimethylsilylamidation was developed that exhibits inverted, nucleophilic selectivity as compared to typical nitrene transfer catalysis. This first example of catalytic C-H nitrogen atom transfer offers facile access to primary amides after deprotection.

Trapping of Terminal Platinapolyynes by Copper(I) Catalyzed Click Cycloadditions; Probes of Labile Intermediates in Syntheses of Complexes with Extended sp Carbon Chains, and Crystallographic Studies.

The silylated hexatriynyl complex trans-(C6 F5 )(p-tol3 P)2 Pt(C≡C)3 SiEt3 (PtC6 TES) is converted in situ to PtC6 H (wet n-Bu4 N+ F- , THF) and cross coupled with the diyne H(C≡C)2 SiEt3 (HC4 TES; CuCl/TMEDA, O2 ) to give PtC10 TES (71 %). This sequence is repeated twice to afford PtC14 TES (65 %) and then PtC18 TES (27 %). An analogous series of reactions starting with PtC8 TES gives PtC12 TES (60 %), then PtC16 TES (43 %), and then PtC20 TES (17 %). Similar cross couplings with H(C≡C)2 Si(i-Pr)3 (HC4 TIPS) give PtC12 TIPS (68 %), PtC14 TIPS (68 %), and PtC16 TIPS (34 %). The trialkylsilyl species (up to PtC18 TES) are converted to 3+2 "click" cycloadducts or 1,4-disubstituted 1,2,3-triazoles trans-(C6 F5 )(p-tol3 P)2 Pt(C≡C)n-1 C=CHN(CH2 C6 H5 )N=N (29-92 % after workups). The most general procedure involves generating the terminal polyynes PtCx H (wet n-Bu4 N+ F- , THF) in the presence of benzyl azide in DMF and aqueous CuSO4 /ascorbic acid. All of the preceding complexes are crystallographically characterized and the structural and spectroscopic properties analyzed as a function of chain length. Two pseudopolymorphs of PtC20 TES are obtained, both of which feature molecules with parallel sp carbon chains in a pairwise head/tail packing motif with extensive sp/sp van der Waals contacts.

Linear and Bent Nitric Oxide Ligand Binding in an Asymmetric Butterfly Complex: CoMoCo'.

Two synthetic approaches to install metallodithiolate ligands on molybdenum centers using the synthons [Mo2(CH3CN)10]4+ and (N2S2)Co(NO) [N2S2 = N,N-bis(2-mercaptoethyl)-1,4-diazacycloheptane and NO = nitric oxide], or [Mo(NO)2(CH3CN)4]2+ (CH3CN = acetonitrile) and [(N2S2)Co]2 lead to a bis-nitrosylated, trimetallic dication, CoMoCo'. This unique asymmetric butterfly complex, with S = 1, has a bent NO within the small {Co(NO)}8 wing (denoted as Co), reflecting CoIII(NO-), and is S-bridged to a linear {Mo(NO)}6 diamagnetic unit. The latter is further S-bridged to a pentacoordinate (N2S2)CoIII(CH3CN) donor in the larger wing and is the origin of the two unpaired electrons, denoted as Co'. The asymmetry in Mo-Co distances, 3.33 Šin the Co wing and 2.73 Šin the Co' wing, indicated a Mo-Co' bonding interaction. The transfer of NO from (N2S2)Co(NO) in the former path is needed to cleave the strong quadruple bond in [Mo≣Mo]4+, with the energetic cost compensated for via a one-electron bond between Mo and Co', as indicated by natural bonding orbital analysis.

C-H Amination Mediated by Cobalt Organoazide Adducts and the Corresponding Cobalt Nitrenoid Intermediates.

Treatment of (ArL)CoBr (ArL = 5-mesityl-1,9-(2,4,6-Ph3C6H2)dipyrrin) with a stoichiometric amount of 1-azido-4-(tert-butyl)benzene N3(C6H4-p-tBu) furnished the corresponding four-coordinate organoazide-bound complex (ArL)CoBr(N3(C6H4-p-tBu)). Spectroscopic and structural characterization of the complex indicated redox innocent ligation of the organoazide. Slow expulsion of dinitrogen (N2) was observed at room temperature to afford a ligand functionalized product via a [3 + 2] annulation, which can be mediated by a high-valent nitrene intermediate such as a CoIII iminyl (ArL)CoBr(•N(C6H4-p-tBu)) or CoIV imido (ArL)CoBr(N(C6H4-p-tBu)) complex. The presence of the proposed intermediate and its viability as a nitrene group transfer reagent are supported by intermolecular C-H amination and aziridination reactivities. Unlike (ArL)CoBr(N3(C6H4-p-tBu)), a series of alkyl azide-bound CoII analogues expel N2 only above 60 °C, affording paramagnetic intermediates that convert to the corresponding Co-imine complexes via α-H-atom abstraction. The corresponding N2-released structures were observed via single-crystal-to-crystal transformation, suggesting formation of a Co-nitrenoid intermediate in solid-state. Alternatively, the alkyl azide-bound congeners supported by a more sterically accessible dipyrrinato scaffold tBuL (tBuL = 5-mesityl-(1,9-di-tert-butyl)dipyrrin) facilitate intramolecular 1,3-dipolar cycloaddition as well as C-H amination to furnish 1,2,3-dihydrotriazole and substituted pyrrolidine products, respectively. For the C-H amination, we observe that the temperature required for azide activation varies depending on the presence of weak C-H bonds, suggesting that the alkyl azide adducts serve as viable species for C-H amination when the C-H bonds are (1) proximal to the azide moiety and (2) sufficiently weak to be activated.

In Crystallo Snapshots of Rh2-Catalyzed C-H Amination.

While X-ray crystallography routinely provides structural characterization of kinetically stable pre-catalysts and intermediates, elucidation of the structures of transient reactive intermediates, which are intimately engaged in bond-breaking and -making during catalysis, is generally not possible. Here, we demonstrate in crystallo synthesis of Rh2 nitrenoids that participate in catalytic C-H amination, and we characterize these transient intermediates as triplet adducts of Rh2. Further, we observe the impact of coordinating substrate, which is present in excess during catalysis, on the structure of transient Rh2 nitrenoids. By providing structural characterization of authentic C-H functionalization intermediates, and not kinetically stabilized model complexes, these experiments provide the opportunity to define critical structure-activity relationships.

Fluorescence and Metal-Binding Properties of the Highly Preorganized Tetradentate Ligand 2,2'-Bi-1,10-phenanthroline and Its Remarkable Affinity for Cadmium(II).

The metal-ion-complexing properties of the tetradentate ligand 2,2'-bi-1,10-phenanthroline (BIPHEN) in 50% CH3OH/H2O are reported for a variety of metal ions. BIPHEN (with two reinforcing benzo groups in the backbone) was compared to other tetrapyridyls, 2,9-di(pyrid-2-yl)-1,10-phenanthroline (DPP; with one benzo group) and 2,2':6',2″:6″,2‴- quaterpyridine (QPY; with no benzo groups), with levels of preorganization BIPHEN > DPP > QPY. Formation constants were determined by following the variation of the intense π → π* transitions in the absorbance spectra of BIPHEN in the presence of metal ion as a function of the pH. The log K1 values show that the increased level of preorganization produced by the two benzo groups, reinforcing the backbone of the BIPHEN ligand, leads to increased complex stability with large metal ions (an ionic radius greater than 0.9 Å) compared to the less preorganized tetrapyridines DPP and QPY. In particular, the large CdII ion [log K1(BIPHEN) = 12.7] shows unusual selectivity over the small ZnII ion [log K1(BIPHEN) = 7.78]. The order of levels of preorganization BIPHEN > DPP > QPY leads to enhanced selectivity for SmIII over GdIII with increased preorganization, which is of interest in relation to separating AmIII from GdIII in the treatment of radioactive waste. AmIII is very close in ionic radius to SmIII, so that the size-based selectivity produced by the enhanced preorganization of BIPHEN should translate into enhanced AmIII/GdIII selectivity. The chelation-enhanced fluorescence (CHEF) effect in BIPHEN complexes is discussed. The CHEF effect in the ZnII complex is somewhat smaller than that for CdII, which is discussed in terms of decreased overlap in the Zn-N bonds formed by the too small ZnII, leading to a partial photoinduced-electron-transfer quenching of fluorescence. The structure of the complex [Cd(BIPHEN)2](ClO4)2 is reported and shows that the Cd-N bonds are largely normal for the unusual 8-coordination observed, except that steric clashes between the terminal pyridyl groups of each of the BIPHEN ligands, and the rest of the orthogonal BIPHEN ligand, lead to some stretching of the outer Cd-N bonds.

Axial Elongation of Mononuclear Lanthanide Metallocenophanes: Magnetic Properties of Dysprosium- and Terbium-[1]Ruthenocenophane Complexes.

We report the first f-block-ruthenocenophane complexes 1 (Dy) and 2 (Tb) and provide a comparative discussion of their magnetic structure with respect to earlier reported ferrocenophane analogues. While axial elongation of the rare trigonal-prismatic geometry stabilizes the magnetic ground state in the case of Dy3+ and results in a larger barrier to magnetization reversal (U), a decrease in U is observed for the case of Tb3+ .

Characterization of a Reactive Rh2 Nitrenoid by Crystalline Matrix Isolation.

The fleeting lifetimes of reactive intermediates in C-H functionalization chemistry often prevent their direct characterization. For example, the critical nitrenoid intermediates that mediate Rh2-catalyzed C-H amination have eluded characterization for more than 40 years. In the absence of structural characterization of these species, methodological development is often computationally guided. Here we report the first X-ray crystal structure of a reactive Rh2 nitrenoid, enabled by N2 elimination from an organic azide ligand within a single-crystal matrix. The resulting high-resolution structure displays metrical parameters consistent with a triplet nitrene complex of Rh2. The demonstration of facile access to reactive metal nitrenoids within a crystalline matrix provides a platform for structural characterization of the transient species at the heart of C-H functionalization.

Controlling O2 Reactivity in Synthetic Analogues of [NiFeS]- and [NiFeSe]-Hydrogenase Active Sites.

Strategies for limiting, or reversing, the degradation of air-sensitive, base metal catalysts for the hydrogen evolution/oxidation reaction on contact with adventitious O2 are guided by nature's design of hydrogenase active sites. The affinity of oxygen for sulfur and selenium, in [NiFeS]- and [NiFeSe]-H2ase, yields oxygenated chalcogens under aerobic conditions, and delays irreversible oxygen damage at the metals by maintaining the NiFe core structures. To identify the controlling features of S-site oxygen uptake, related Ni(µ-EPhX)(µ-S'N2)Fe (E = S or Se, Fe = (η5-C5H5)FeII(CO)) complexes were electronically tuned by the para-substituent on µ-EPhX (X = CF3, Cl, H, OMe, NMe2) and compared in aspects of communication between Ni and Fe. Both single and double O atom uptake at the chalcogens led to the conversion of the four-membered ring core, Ni(µ-EPhX)(µ-S'N2)Fe, to a five-membered ring Ni-O-E-Fe-S', where an O atom inserts between E and Ni. In the E = S, X = NMe2 case, the two-oxygen uptake complex was isolated and characterized as the sulfinato species with the second O of the O2SPh-NMe2 unit pointing out of the five-membered Ni-O-S-Fe-S' ring. Qualitative rates of reaction and ratios of oxygen-uptake products correlate with Hammett parameters of the X substituent on EPhX. Density functional theory computational results support the observed remote effects on the NiFe core reactivity; the more electron-rich sulfurs are more O2 responsive in the SPhX series; the selenium analogues were even more reactive with O2. Mass spectral analysis of the sulfinato products using a mixture of 18O2/16O2 suggests a concerted mechanism in O2 addition. Deoxygenation, by reduction or O atom abstraction reagents, occurs for the 1-O addition complexes, while the 2-O, sulfinato, analogues are inert. The abstraction of oxygen from the 1-O, sulfenato species, is related to oxygen repair in soluble, NAD+-reducing [NiFe]-H2ase (Horch, M.; Lauterbach, L.; et al. J. Am. Chem. Soc. 2015, 137, 2555-2564).

Syntheses, Structures, and Spectroscopic Properties of 1,10-Phenanthroline-Based Macrocycles Threaded by PtC8 Pt, PtC12 Pt, and PtC16 Pt Axles: Metal-Capped Rotaxanes as Insulated Molecular Wires.

The platinum polyynyl complexes trans-(C6 F5 )(p-tol3 P)2 Pt(C≡C)n/2 H undergo oxidative homocoupling (O2 , CuCl/TMEDA) to diplatinum polyynediyl complexes trans, trans-(C6 F5 )(p-tol3 P)2 Pt(C≡C)n Pt(Pp-tol3 )2 (C6 F5 ) (n=4, 2; 6, 5; 8, 8; 92-97 %) as reported previously. When related reactions are conducted in the presence of CuI adducts of the 1,10-phenanthroline-based macrocycles 2,9-(1,10-phenanthrolinediyl)(p-C6 H4 O(CH2 )6 O)2 (1,3-C6 H4 ) (10, 33-membered) or 2,9-(1,10-phenanthrolinediyl)(p-C6 H4 O(CH2 )6 O)2 (2,7-naphthalenediyl) (11, 35-membered), excess K2 CO3 , and I2 (oxidant), rotaxanes are isolated that feature a Pt(C≡C)n Pt axle that has been threaded through the macrocycle (2⋅10, 9 %; 5⋅10, 41 %; 5⋅11, 28 %; 8⋅10, 12 %; 8⋅11, 9 %). Their crystal structures are determined and analyzed in detail, particularly with respect to geometric perturbations and the degree of steric sp carbon chain insulation. NMR spectra show a number of shielding effects. UV/Vis spectra do not indicate significant electronic interactions between the Pt(C≡C)n Pt axles and macrocycles, although cyclic voltammetry data suggest rapid reactions following oxidation.

Low Heat of Adsorption of Ethylene Achieved by Major Solid-State Structural Rearrangement of a Discrete Copper(I) Complex.

The trinuclear copper(I) pyrazolate complex [Cu3 ] rearranges to the dinuclear analogue [Cu2 ⋅(C2 H4 )2 ] when exposed to ethylene gas. Remarkably, the [Cu3 ]↔[Cu2 ⋅(C2 H4 )2 ] rearrangement occurs reversibly in the solid state. Furthermore, this transformation emulates solution chemistry. The bond-making and breaking processes associated with the rearrangement in the solid-state result in an observed heat of adsorption (-13±1 kJ mol-1 per Cu-C2 H4 interaction) significantly lower than other Cu-C2 H4 interactions (≥-24 kJ mol-1 ). The low overall heat of adsorption, "step" isotherms, high ethylene capacity (2.76 mmol g-1 ; 7.6 wt % at 293 K), and high ethylene/ethane selectivity (136:1 at 293 K) make [Cu3 ] an interesting basis for the rational design of materials for low-energy ethylene/ethane separations.

Direct Characterization of a Reactive Lattice-Confined Ru2 Nitride by Photocrystallography.

Reactive metal-ligand (M-L) multiply bonded complexes are ubiquitous intermediates in redox catalysis and have thus been long-standing targets of synthetic chemistry. The intrinsic reactivity of mid-to-late M-L multiply bonded complexes renders these structures challenging to isolate and structurally characterize. Although synthetic tuning of the ancillary ligand field can stabilize M-L multiply bonded complexes and result in isolable complexes, these efforts inevitably attenuate the reactivity of the M-L multiple bond. Here, we report the first direct characterization of a reactive Ru2 nitride intermediate by photocrystallography. Photogeneration of reactive M-L multiple bonds within crystalline matrices supports direct characterization of these critical intermediates without synthetic derivatization.

Allantoin Crystal Formation in Bagrada hilaris (Burmeister) (Heteroptera: Pentatomidae) Females.

Bagrada hilaris is a polyphagous herbivore reported as an invasive pest in the United States. During the course of dissecting Burmeister hilaris unique crystals were observed in both the midgut and oviducts. Crystals were identified using X-ray diffraction techniques. Both acicular (i.e., needle-like, slender, and/or tapered) and cubic (i.e., cube shaped) crystals were observed in six of 75 individuals examined (8.0%). The crystals were mainly observed in females (6.7%), followed by males (1.3%) with no crystals observed in the minimal number of nymphs examined (0%). Crystals of both types were detected in the midgut and lateral oviducts of the females and midgut in males. The acicular crystals often appeared as distinct bundles when present in the midgut and oviducts. Crystals varied in size with the acicular crystals ranging from 0.12 mm to 0.5 mm in length although the cubic crystals ranged in length from 0.25 mm to over 1.0 mm with widths of ∼0.25 mm. The cubic crystals were identified as allantoin although the acicular crystals were most likely dl-allantoin in combination with halite. While allantoin in a soluble form is often found in insect tissues and excreta; being present as a crystal, especially in such a large form, is curious and raises some interesting questions. More research is warranted to further understand mechanisms associated with such crystal formation in B. hilaris and can lead to a better understanding of the excretory process in this species and the role allantoin plays in the elimination of excess nitrogen.

Discovery, Total Synthesis and Key Structural Elements for the Immunosuppressive Activity of Cocosolide, a Symmetrical Glycosylated Macrolide Dimer from Marine Cyanobacteria.

A new dimeric macrolide xylopyranoside, cocosolide (1), was isolated from the marine cyanobacterium preliminarily identified as Symploca sp. from Guam. The structure was determined by a combination of NMR spectroscopy, HRMS, X-ray diffraction studies and Mosher's analysis of the base hydrolysis product. Its carbon skeleton closely resembles that of clavosolides A-D isolated from the sponge Myriastra clavosa, for which no bioactivity is known. We performed the first total synthesis of cocosolide (1) along with its [α,α]-anomer (26) and macrocyclic core (28), thus leading to the confirmation of the structure of natural 1. The convergent synthesis featured Wadsworth-Emmons cyclopropanation, Sakurai annulation, Yamaguchi macrocyclization/dimerization reaction, α-selective glycosidation and ß-selective glycosidation. Compounds 1 and 26 potently inhibited IL-2 production in both T-cell receptor dependent and independent manners. Full activity requires the presence of the sugar moiety as well as the intact dimeric structure. Cocosolide also suppressed the proliferation of anti-CD3-stimulated T-cells in a dose-dependent manner.

Controlling the Fluorescence Response of PET Sensors via the Metal-Ion π-Contacting Ability of the Fluorophore: Coumarin, a Weaker π Contacter.

The π-contact hypothesis, that quenching of the fluorescence of complexes of photoinduced electron transfer sensors with heavy diamagnetic metal ions may be caused by π contacts between the metal ion and the fluorophore of the sensor, is examined with a study of the fluorescent properties of the sensor 4-[[bis(2-pyridinylmethyl)amino]methyl]-6,7-dimethoxy-1-benzopyran-2-one (cdpa) and the structures of its complexes with some metal ions. The coumarin-type fluorophore of cdpa is a weaker π-contact former than the anthracenyl fluorophore of the analogue adpa (Inorg. Chem. 2014, 53, 9014): only Ag(I), the strongest π contact former, quenches the fluorescence of cdpa, apart from paramagnetic Cu(II) and Ni(II), which quench fluorescence by a redox mechanism not requiring π contacts. The structures of [Ag(cdpa)NO3] (1), [Pb(cdpa)(NO3)2] (2), [Zn(cdpa)(NO3)2] (3), [Cd(cdpa)Cl2]2 (4), [Cd(cdpa)2H2O](NO3)2 (5), and [Hg(cdpa)2H2O](NO3)2 (6) are reported. Structure 1 shows that Ag(I) is the only metal ion studied that forms π contacts with the fluorophore of cdpa in the solid state: Ag···C η(2) π contacts of 3.083 and 3.095 Å, in line with quenching of the fluorescence of the Ag(I)(cdpa) complex. In contrast, Pb(II), Zn(II), and Cd(II) show chelation-enhanced fluorescence in their cdpa complexes, and the structures of 2-4 show that the fluorophore of cdpa in each case forms no π contacts. By contrast, the adpa complexes of Pb(II) and Cd(II) show π contacts with its more strongly π-contacting fluorophore (Inorg. Chem. 2014, 53, 9014). The structures of 5 and 6 show bis-complexes of cdpa: the coordination geometries of Cd(II) and Hg(II) are discussed in relation to the number of covalently bound donor atoms present. The preferred hapticity of π-contacted metal ions is evaluated from the literature structures, suggesting that d(10) metal ions such as Ag(I) and Hg(II), and tetragonally distorted Cu(II) and Pd(II), prefer η(1) and η(2) π contacts, while more ionically bound metal ions such as K(I), Ba(II), and La(III), as well as d(10)s(2) metal ions such as Tl(I), Pb(II), and Bi(III), prefer η(6) contacts.

Synthesis of Triborylalkenes from Terminal Alkynes by Iridium-Catalyzed Tandem C-H Borylation and Diboration.

A two-step reaction to convert terminal alkynes into triborylalkenes is reported. In the first step, the terminal alkyne and pinacolborane (HBpin) are converted into an alkynylboronate, which is catalyzed by an iridium complex supported by a SiNN pincer ligand. In the second step, treatment of the reaction mixture with CO generates a new catalyst which mediates dehydrogenative diboration of alkynylboronate with pinacolborane. The mechanism of the diboration remains unclear but it does not proceed via intermediacy of hydroboration products or via B2 pin2.

The effect of π contacts between metal ions and fluorophores on the fluorescence of PET sensors: implications for sensor design for cations and anions.

The idea that M···C π contacts between diamagnetic heavy metal ions such as Pb(II), Ag(I), Pd(II), or Hg(II) and the anthracenyl fluorophore of adpa ((N-(9-anthracenylmethyl)-N-(2-pyridinylmethyl)-2-pyridinemethanamine) are responsible for quenching the fluorescence of the complexes of these metal ions with adpa is explored crystallographically. The structures of [Pb(adpa)(NO3)2] (1), [Ag(adpa)NO3] (2), [Pd(adpa)NO3]NO3 (3), [Zn(adpa)(NO3)2] (4), and [Cd(adpa)Br2] (5) are reported. The π contacts with the fluorophore are for 1 are a Pb···C π contact of 3.178 Å; for 2, an Ag···C π contact of 3.016 Å; and for 3, a Pd···C π contact of 2.954 Å on the axial site of the Pd(II) ion. The Zn(II) ion in 4 has no Zn···C π contact, with the anthracenyl fluorophore rotated completely away from the Zn(II) ion. These structures confirm that in the Pb(II), Ag(I), and Pd(II) complexes of adpa, which experience strong quenching of fluorescence, there are strong M···C π contacts, as expected if it is the π contacts that quench fluorescence. In contrast, for the Zn(II) adpa complex, which forms no π contact, there is a strong increase in fluorescence intensity. The structure of 5 shows a long Cd···C π contact at 3.369 Å, in contrast to a previously reported structure with two coordinated nitrates where the Cd···C π contact is 3.097 Å. The long Cd···C π contact in [Cd(adpa)Br2] suggests how coordination of Br(-), as well as other more covalently bound ligands such as Cl(-), SCN(-), and S2O3(2-), cause an increase in fluorescence intensity, reported for the Cd(II)adpa complex in 50% CH3OH/H2O. Coordination of covalently bound ligands to the Cd(II) weakens the Cd···C π contact and so enhances fluorescence, whereas more ionically bound ligands such as SO4(2-), NO3(-), or H2O produce a strong Cd···C π contact and weakened fluorescence. Complexes of the Cd(II)/adpa type may form the basis for a new type of anion/small molecule sensor. The tendency of metal ions to form π contacts with aromatic groups is analyzed in terms of the frequency of occurrence of π contacted structures in the literature, as well as by DFT calculations on the adpa complexes.