Removing acoustic ringing baseline curvature in 13 C NMR spectra for quantitative analyses.

13 C nuclear magnetic resonance (NMR) is traditionally considered an insensitive technique, requiring long acquisition times to measure dilute functionalities on large polymers. With the introduction of cryoprobes and better electronics, sensitivity has improved in a way that allows measurements to take less than 1/20th the time that they previously did. Unfortunately, a high Q-factor with cryoprobes creates baseline curvature related to acoustic ringing that affects quantitative NMR analyses. Manual baseline correction is commonly used to compensate for the baseline roll, but it is a time-intensive process. The outcome of manual baseline correction can vary depending on processing parameters, especially for complicated spectra. Additionally, it can be challenging to distinguish between broad peaks and baseline rolls. A new anti-ring pulse sequence (zgig_pisp) was previously reported to improve on the incumbent single pulse experiment (zgig). The original report presented limited comparison data with 13 C NMR, but a thorough validation is needed before broader implementation can be considered. In this work, we report the round-robin testing and comparison of zgig_pisp and zgig pulse sequences. During the testing phase, we found that zgig_pisp is practically equivalent to zgig to ±2% for the majority of integrals examined. Additionally, a short broadband inversion pulse (BIP) was demonstrated as an alternative to the originally reported adiabatic CHIRP shaped pulse. The zgig_pisp pulse sequence code for Bruker spectrometers is also simplified.

Multicomponent Pyrazole Synthesis from Alkynes, Nitriles, and Titanium Imido Complexes via Oxidatively Induced N-N Bond Coupling.

Pyrazoles are an important class of heterocycles found in a wide range of bioactive compounds and pharmaceuticals. Pyrazole synthesis often requires hydrazine or related reagents where an intact N-N bond is conservatively installed into a pyrazole precursor fragment. Herein, we report the multicomponent oxidative coupling of alkynes, nitriles, and Ti imido complexes for the synthesis of multisubstituted pyrazoles. This modular method avoids potentially hazardous reagents like hydrazine, instead forming the N-N bond in the final step via oxidation-induced coupling on Ti. The mechanism of this transformation has been studied in-depth through stoichiometric reactions of the key diazatitanacyclohexadiene intermediate, which can be accessed via multicomponent coupling of Ti imidos with nitriles and alkynes, ring opening of 2-imino-2H-azirines, or direct metalation of 4-azadiene-1-amine derivatives. The critical transformation in this reaction is the 2-electron oxidation-induced N-N coupling on Ti. This is a rare example of formal N-N coupling on a metal center, which likely occurs through an electrocyclic mechanism analogous to a Nazarov cyclization. Conveniently, these 2-electron-oxidized diazatitanacyclohexadiene intermediates can be accessed via disproportionation of the 1-electron-oxidized species, which allows utilization of weak oxidants such as TEMPO.

Group 4 Diarylmetallocenes as Bespoke Aryne Precursors for Titanium-Catalyzed [2 + 2 + 2] Cycloaddition of Arynes and Alkynes.

Despite the ubiquity of reports describing titanium (Ti)-catalyzed [2 + 2 + 2] cyclotrimerization of alkynes, the incorporation of arynes into this potent manifold has never been reported. The in situ generation of arynes often requires fluoride, which instead will react with the highly fluorophilic Ti center, suppressing productive catalysis. Herein, we describe the use of group 4 diarylmetallocenes, CpR2MAr2 (CpR = C5H5, C5Me5; M = Ti, Zr), as aryne precursors for the Ti-catalyzed synthesis of substituted naphthalenes via coupling with 2 equiv of an alkyne. Fair-to-good yields of the desired naphthalene products could be obtained with 1% catalyst loadings, which is roughly an order of magnitude lower than similar reactions catalyzed by palladium or nickel. Additionally, naphthalenes find broad applications in the electronics, photovoltaics, and pharmaceutical industries, urging the discovery of more economic syntheses. These results indicate that aryne transfer from a CpR2M(η2-aryne) complex to another metal is a viable route for the introduction of aryne fragments into organometallic catalytic processes.

Bioinspired Metal-Organic Framework for Trace CO2 Capture.

A Zn benzotriazolate metal-organic framework (MOF), [Zn(ZnO2CCH3)4(bibta)3] (1, bibta2- = 5,5'-bibenzotriazolate), has been subjected to a mild CH3CO2-/HCO3- ligand exchange procedure followed by thermal activation to generate nucleophilic Zn-OH groups that resemble the active site of α-carbonic anhydrase. The postsynthetically modified MOF, [Zn(ZnOH)4(bibta)3] (2*), exhibits excellent performance for trace CO2 capture and can be regenerated at mild temperatures. IR spectroscopic data and density functional theory (DFT) calculations reveal that intercluster hydrogen bonding interactions augment a Zn-OH/Zn-O2COH fixation mechanism.

Zirconium Metal-Organic Frameworks Assembled from Pd and Pt PNNNP Pincer Complexes: Synthesis, Postsynthetic Modification, and Lewis Acid Catalysis.

Carboxylic acid-functionalized Pd and Pt PNNNP pincer complexes were used for the assembly of two porous Zr metal-organic frameworks (MOFs), 2-PdX and 2-PtX. Powder X-ray diffraction analysis shows that the new MOFs adopt cubic framework structures similar to the previously reported Zr6O4(OH)4[(POCOP)PdX]3, [POCOP = 2,6-(OPAr2)2C6H3); Ar = p-C6H4CO2-, X = Cl-, I-] (1-PdX). Elemental analysis and spectroscopic characterization indicate the presence of missing linker defects, and 2-PdX and 2-PtX were formulated as Zr6O4(OH)4(OAc)2.4[M(PNNNP)X]2.4 [M = Pd, Pt; PNNNP = 2,6-(HNPAr2)2C5H3N; Ar = p-C6H4CO2-; X = Cl-, I-]. Postsynthetic halide ligand exchange reactions were carried out by treating 2-PdX with Ag(O3SCF3) or NaI followed by PhI(O2CCF3)2. The latter strategy proved to be more effective at activating the MOF for the catalytic intramolecular hydroamination of an o-substituted alkynyl aniline, underscoring the advantage of using halide exchange reagents that produce soluble byproducts.

Iterative Supervised Principal Component Analysis Driven Ligand Design for Regioselective Ti-Catalyzed Pyrrole Synthesis.

The rational design of catalysts remains a challenging endeavor within the broader chemical community owing to the myriad variables that can affect key bond-forming events. Designing selective catalysts for any reaction requires an efficient strategy for discovering predictive structure-activity relationships. Herein, we describe the use of iterative supervised principal component analysis (ISPCA) in de novo catalyst design. The regioselective synthesis of 2,5-dimethyl-1,3,4-triphenyl-1H-pyrrole (C) via a Ti-catalyzed formal [2 + 2 +1] cycloaddition of phenylpropyne and azobenzene was targeted as a proof of principle. The initial reaction conditions led to an unselective mixture of all possible pyrrole regioisomers. ISPCA was conducted on a training set of catalysts, and their performance was regressed against the scores from the top three principal components. Component loadings from this PCA space and k-means clustering were used to inform the design of new test catalysts. The selectivity of a prospective test set was predicted in silico using the ISPCA model, and optimal candidates were synthesized and tested experimentally. This data-driven predictive-modeling workflow was iterated, and after only three generations the catalytic selectivity was improved from 0.5 (statistical mixture of products) to over 11 (>90% C) by incorporating 2,6-dimethyl-4-(pyrrolidin-1-yl)pyridine as a ligand. The origin of catalyst selectivity was probed by examining ISPCA variable loadings in combination with DFT modeling, revealing that ligand lability plays an important role in selectivity. A parallel catalyst search using multivariate linear regression (MLR), a popular approach in catalysis informatics, was also conducted in order to compare these strategies in a hypothetical catalyst scouting campaign. ISPCA appears to be more robust and predictive than MLR when sparse training sets are used that are representative of the data available during the early search for an optimal catalyst. The successful development of a highly selective catalyst without resorting to long, stochastic screening processes demonstrates the inherent power of ISPCA in de novo catalyst design and should motivate the general use of ISPCA in reaction development.

Unveiling reactive metal sites in a Pd pincer MOF: insights into Lewis acid and pore selective catalysis.

A porous Zr metal-organic framework, 1-PdBF4 [Zr6O4(OH)4(OAc)2.4{(PNNNP)Pd(MeCN)}2.4(BF4)2.4; PNNNP = 2,6-(HNPAr2)2C5H3N; Ar = p-C6H4CO2-], has been synthesized via postsynthetic oxidative I-/BF4- ligand exchange using NOBF4. 1-PdBF4 enjoys markedly superior catalytic activity and recyclability to its trifluoracetate-exchanged analogue, 1-PdTFA, for the intramolecular cyclization of o-alkynyl anilines and the carbonyl-ene cyclization of citronellal. Moreover, 1-PdBF4 demonstrates a rare example of pore selective catalysis for the cyclization of 2-ethynyl aniline.

Electrochemical and structural investigation of the interactions between naphthalene diimides and metal cations.

The effects of Li+ and Mg2+ on the electrochemical behaviour and photoreduction of N,N'-bis(2,6-diisopropylphenyl)naphthalene diimide (Dipp2NDI) have been investigated using cyclic voltammetry and UV-vis spectroscopy. Strong cation-anion interactions between Li+ or Mg2+ and [Dipp2NDI]2- result in solvent-dependent anodic shifts of the NDI˙-/2- redox couple. In organic solvents of moderate dielectric constant and donor ability, the two, one-electron redox processes typically observed for Dipp2NDI merge into a single, two-electron process. This strong metal cation effect has been leveraged for the photoreduction of Dipp2NDI to [Dipp2NDI]2-via a disproportionation process. Chemical reduction of Dipp2NDI with iPrMgCl has allowed the isolation of Mg2+ complexes of [Dipp2NDI]2-. Single crystal X-ray diffraction was used to determine the structure of a dimeric complex, [(Dipp2NDI)Mg2(THF)3]2, that features strong coordination of Mg2+ by the oxygen atoms of the reduced NDI.