RESUMO
PURPOSE: Literature studies showed a very wide range of pedicle screw loosening rates after thoracolumbar stabilization, ranging from less than 1 to 15 % in non-osteoporotic patients treated with rigid systems and even higher in osteoporotic subjects or patients treated with dynamic systems. Firstly, this paper aims to investigate how much this complication is affecting the success rate of pedicle screw fixation, in both non-osteoporotic and osteoporotic patients, and to discuss the biomechanical reasons which may be related to the variability of the rates found in the literature. The secondary aim was to summarize and discuss the published definitions and conventions about screw loosening from a clinical and radiological point of view. METHODS: Narrative literature review. RESULTS: Screw loosening appears to be a minor problem for fixation and fusion of healthy, non-osteoporotic bone. Pedicle screw fixation in osteoporotic bone is believed to be at risk of loosening, but clinical data are actually scarce. Both expandable and augmented screws may be a viable option to reduce the risk of loosening, but clinical evidence is missing. Posterior motion-preserving implants seems to have a significant risk of screw loosening. Standardization appears to be lacking regarding the radiological assessment. Marked differences in the loosening rates found based either on planar radiography or on CT scanning were observed. CONCLUSIONS: Reported loosening rates primarily depended on the protocol used for the clinical examination during follow-up and on the conventions used for the radiological assessment. Aiming to a better comparability of published data, we recommend the authors of clinical studies to describe which criteria were used to assess a loosened screw, as well as the protocol of the clinical follow-up examination. Low-dose CT should be used for the assessment of screw loosening whenever possible.
Assuntos
Parafusos Pediculares/efeitos adversos , Falha de Prótese , Coluna Vertebral/cirurgia , Humanos , Osteoporose/complicações , Coluna Vertebral/diagnóstico por imagem , Tomografia Computadorizada por Raios XRESUMO
PURPOSE: Regenerative strategies aim to restore the original biofunctionality of the intervertebral disc. Different biomaterials are available, which might support disc regeneration. In the present study, the prospects of success of two hydrogels functionalized with anti-angiogenic peptides and seeded with bone marrow derived mononuclear cells (BMC), respectively, were investigated in an ovine nucleotomy model. METHODS: In a one-step procedure iliac crest aspirates were harvested and, subsequently, separated BMC were seeded on hydrogels and implanted into the ovine disc. For the cell-seeded approach a hyaluronic acid-based hydrogel was used. The anti-angiogenic potential of newly developed VEGF-blockers was investigated on ionically crosslinked metacrylated gellan gum hydrogels. Untreated discs served as nucleotomy controls. 24 adult merino sheep were used. After 6 weeks histological, after 12 weeks histological and biomechanical analyses were conducted. RESULTS: Biomechanical tests revealed no differences between any of the implanted and nucleotomized discs. All implanted discs significantly degenerated compared to intact discs. In contrast, there was no marked difference between implanted and nucleotomized discs. In tendency, albeit not significant, degeneration score and disc height index deteriorated for all but not for the cell-seeded hydrogels from 6 to 12 weeks. Cell-seeded hydrogels slightly decelerated degeneration. CONCLUSIONS: None of the hydrogel configurations was able to regenerate biofunctionality of the intervertebral disc. This might presumably be caused by hydrogel extrusion. Great importance should be given to the development of annulus sealants, which effectively exploit the potential of (cell-seeded) hydrogels for biological disc regeneration and restoration of intervertebral disc functioning.
Assuntos
Materiais Biocompatíveis/uso terapêutico , Hidrogéis/uso terapêutico , Degeneração do Disco Intervertebral/terapia , Disco Intervertebral/fisiologia , Regeneração/fisiologia , Adulto , Inibidores da Angiogênese/uso terapêutico , Animais , Fenômenos Biomecânicos , Transplante de Medula Óssea , Discotomia Percutânea , Humanos , Ácido Hialurônico/uso terapêutico , Técnicas In Vitro , Leucócitos Mononucleares/transplante , OvinosRESUMO
Current clinical examination of low back pain (LBP) patients primarily relies on static clinical examinations, which rarely represent the dynamic postures patients adopt during daily activities. To gain an overview on the dynamic kinematics-kinetics changes over a day, the lumbar back kinematics of asymptomatic individuals and LBP patients were measured over 24 h, and the passively resisted bending and torsional moments were estimated. 208 asymptomatic subjects (115 females) and 116 LBP patients (71 females) were analysed. Compared to static upright standing, the mean lumbar lordosis of asymptomatic subjects drops significantly by 21° during everyday life (p < 0.01). Maximum bending moments of 44.0-50.6 Nm were estimated at the L2-L3. LBP patients showed significantly lower (p < 0.01) lumbar flattening during daily life of about 16°. Maximum bending moments of 27-52 Nm were found at the L3-L4. The initial static upright lumbar lordosis was significantly lower in LBP population (by 6°) resulting in almost similar average lumbar shapes during daily activities in both groups. The torsional movements were with 2.2° greatest in L1-L2 independent of sex (p = 0.19) and LBP (p = 0.54) with moments of 6-16 Nm. The lumbar profile and associated internal moments during daily life differ substantially from those recorded during clinical examinations. LBP patients demonstrates significantly lower lordosis at the snapshot assessment and significantly lower movement variations and internal moments during daily life. Only the dynamic long-term assessments unravelled a less flexed posture in LBP population. Apparently, such a reduced dynamic flexed posture indicates a compensatory habit for pain relief.
RESUMO
The Schober test is considered reliable in evaluating lumbar mobility and its impairment. Especially in patients with chronic low back pain (cLBP) identification of functional restriction is important. We aimed to investigate whether the 5 cm Schober cut-off provides a valid distinction between unrestricted and restricted mobility in participants with and without cLBP (18-65 years). cLBP is defined as LBP persisting for ≥ 12 weeks. We analyzed agreement between the Schober test with two measurement devices (Epionics SPINE®; Idiag M360®) and the influence of lumbar lordosis (LL) on their agreement. Also, the sensitivity and specificity of the Schober test was evaluated. For 187 participants (49.6%) Epionics SPINE® RoF and Schober test matched (either ≥ 5 cm; > 40.8° RoF or ≤ 5 cm; < 40.8° RoF), for 190 participants (50.4%) the two measurements did not. Idiag M360® RoF of 190 participants (50.4%) showed corresponding results (either ≥ 5 cm; > 46.0° RoF or ≤ 5 cm; < 46.0° RoF). Non-agreement was seen in 187 participants (49.6%). LL differed significantly in the Epionics SPINE® cohort (p < 0.001). Regarding the Epionics SPINE® cohort, Schober test showed a sensitivity of 79.6% with a specificity of 36.1%. For the Idiag M360® cohort, Schober test showed a sensitivity of 68.2% and a specificity of 46.6%. Our results do not establish a consistent matching between Schober test and the device measurements. Therefore, Schober test may not be valid to predict impairment of lumbar mobility. We recommend Schober test as an add-on in monitoring of an individual relative to its case.
Assuntos
Região Lombossacral , Coluna Vertebral , Animais , HumanosRESUMO
Sheep, pigs and goats are the most commonly used large animals for preclinical spinal applications. However, there is an increasing number of voices challenging the suitability of quadrupeds, as the obvious postural differences give reason to presume significant differences in the spinal kinematics compared to humans. Rather, it is often questioned if primates did not represent the more suitable experimental animals due to their ability to bipedal walking. Both perspectives, however, have never been systematically addressed. Therefore, the present paper reviews the existing literature on in vivo spinal kinematics of quadrupeds, primates and humans during walking and critically discusses the comparability between these species. Surprisingly, no studies were found for sheep, pigs or goats. Instead, the literature search yielded 50 studies on quadrupeds, horses (n = 37) and dogs (n = 13), primates (n = 10) and humans (n = 61). In general, the kinematic data revealed a high level of heterogeneity and often demonstrated methodological deficits, e.g., insufficient number of measured animals. More kinematic variables were comparable between humans and quadrupeds than between humans and primates. Differences in spinal characteristics, however, could also be found amongst quadrupeds themselves (horse vs. dog). In conclusion, using of a particular animal species as a model for spine research requires its characterization. Cross-species extrapolations are ineligible. Furthermore, the review revealed significant differences between the bipedal walk of primates and humans. The gait alone thus does not constitute a valid argument for the superiority of primates over quadrupeds as experimental animal models for human spine research.
Assuntos
Fenômenos Mecânicos , Coluna Vertebral/fisiologia , Caminhada/fisiologia , Animais , Fenômenos Biomecânicos , HumanosRESUMO
Both intervertebral disc (IVD) and facet joint (FJ) degeneration are frequently associated with chronic low back pain. While genetic factors are considered the most relevant in the onset of degeneration, the mechanics play an important role in its progression. Degenerative changes in one of these two structures are believed to induce degeneration in the other. However, despite decades of research, there is no consensus on the mechanical interplay between the two structures. On the basis of a parametric finite element model of a human L4-L5 spinal motion segment, one thousand individual segments were probabilistically generated covering all grades of degeneration in both structures. The segments were subjected to combined compression and flexion/extension loads. Correlation matrices were created to identify the effect of individual degeneration parameters of each structure on the mechanical stresses in the corresponding counterpart. In the non-degenerated group, a strong positive and a moderate negative correlation was found between the strain of the capsular ligament and the disc height and the nucleus compressibility, respectively. With increasing degeneration, the correlation between IVD morphologies and the FJ loads gradually decreased, whereas the correlation between FJ morphologies and disc load gradually increased. The results suggest that early mechanical changes associated with IVD degeneration have the greatest effect on the FJ loading. With progression of degeneration, this effect is diminished, whereas the appearance of FJ degeneration increasingly influences the disc loading, which might indicate an increasing support of the disc degeneration.
Assuntos
Análise de Elementos Finitos , Vértebras Lombares/patologia , Fenômenos Mecânicos , Articulação Zigapofisária/patologia , Fenômenos Biomecânicos , Progressão da Doença , HumanosRESUMO
Long-term measurements on the lumbar spinal alignment during daily life revealed that humans spent 90% of the day in a forward bent posture. Compared to standing, this posture leads to a substantial increase in spinal loading. The lumbar spine and pelvis, however, contribute differently to the total amount of flexion, which could possibly indicate a different timing of maximum loads in both structures during flexion. This study aimed to evaluate the in vivo implant forces in the hip and lumbar spine during activities in forward bent postures. This work utilized data collected in earlier in vivo measurements on patients either with telemeterized hip endoprostheses (HE) or vertebral body replacements (VBR). The following activities were investigated: standing, upper body flexion with and without weights in the hands using different lifting techniques (straight and bent knees). The maximum resultant forces in VBR were considerably lower than in HE. Increases in flexion inclinations caused direct increases of the resultant forces within VBR, followed by a plateau or even a decrease of the force until maximum inclination. The resultant force in HE displayed an almost continuous increase until the maximum inclination. This general curve behavior resulted in different HE-VBR load ratios, which were affected by lifting additional weights or different lifting techniques. The results emphasize that maximum loads in the spine, in contrast to the hip, do not necessarily occur at maximum upper body flexion as normally expected, rather already at intermediate flexion angles in VBR patients. The results form the basis for more detailed insilico analyzes.
Assuntos
Quadril , Vértebras Lombares , Postura , Próteses e Implantes , Fenômenos Biomecânicos , Feminino , Quadril/fisiologia , Humanos , Vértebras Lombares/fisiologia , Masculino , Pessoa de Meia-Idade , Pelve/fisiologia , Suporte de CargaRESUMO
Intervertebral disc degeneration is one major source of low back pain, which because of its complex multifactorial nature renders the treatment challenging and thus necessitates extensive research. Experimental animal models have proven valuable in improving our understanding of degenerative processes and potentially promising therapies. Currently, the sheep is the most frequently used large animal in vivo model in intervertebral disc research. However, despite its undoubted value for investigations of the complex biological and cellular aspects, to date, it is unclear whether the sheep is also suited to study the mechanical aspects of disc degeneration in humans. A parametric finite element (FE) model of the L4-5 spinal motion segment was developed. Using this model, the geometry and the material properties of both the human and the ovine spinal segment as well as different appearances of disc degeneration can be depicted. Under pure and combined loads, it was investigated whether degenerative changes to both the human and the ovine model equivalent caused the same mechanical response. Different patterns of degeneration resulted in large variations in the ranges of motion, intradiscal pressure, ligament and facet loads. In the human, but not in the ovine model, all these results differed significantly between different degrees of degeneration. This FE model study highlighted possible differences in the mechanical response to disc degeneration between human and ovine intervertebral discs and indicates the necessity of further, more detailed, investigations.
Assuntos
Análise de Elementos Finitos , Degeneração do Disco Intervertebral/fisiopatologia , Fenômenos Mecânicos , Ovinos , Animais , Fenômenos Biomecânicos , Modelos Animais de Doenças , Estudos de Viabilidade , Humanos , Degeneração do Disco Intervertebral/patologia , Vértebras Lombares/patologia , Vértebras Lombares/fisiopatologia , ProbabilidadeRESUMO
Lumbar lordosis (LL) and the range of motion (RoM) are important physiological measurements when initiating any diagnosis and treatment plan for patients with low back pain. Numerous studies reported differences in LL and the RoM due to age and sex. However, these findings remain contradictory. A systematic review and meta-analysis were performed to synthesize mean values and the differences in LL and the RoM because of age and sex. The quality assessment tool for quantitative studies was applied to assess the methodological quality of the studies included. We identified 2372 papers through electronic (2309) and physical (63) searches. We assessed 218 full-text studies reporting measurements of LL or the RoM. In total, 65 studies were included, and a normative database for LL and the RoM is provided as supplementary material. Among these, 11 were included in the meta-analysis. LL and the RoM displayed non-monotonic variations with significant age and sex differences. Young females showed a significantly greater LL and the range of extension (RoE), whereas young males exhibited a greater range of flexion (RoF). Sex differences in the range of lateral bending (RoLB) were small but were significant for the axial rotation (RoAR). For the RoF, RoE and RoLB, differences because of age were significant among most of the age groups in both sexes, whereas for the RoAR, differences were significant only between the 20s vs the 30s-40s (males) and 40s vs 50s (females). Significant differences because of age/sex were identified. However, the age-dependent reduction in LL and the RoM was non-monotonic and differed in both sexes. These findings will help to better distinguish between functional deficits caused by spinal disorders and natural factors/conditions related to age and sex.
Assuntos
Envelhecimento/fisiologia , Lordose/fisiopatologia , Vértebras Lombares/fisiopatologia , Amplitude de Movimento Articular , Caracteres Sexuais , Adulto , Idoso , Feminino , Humanos , Masculino , Pessoa de Meia-IdadeRESUMO
BACKGROUND: Currently, an upright standing posture is normally adopted for evaluations of spinal alignment, which is however sensitive to posture variations. Thus, finding a reproducible reference is essential. This study aimed to evaluate the reproducibility of standing and sitting postures at different arm positions in five consecutive repetitions. METHODS: 22 asymptomatic subjects (11â¯males; 11 females) aged 20-35â¯years were included. Subjects were repeatedly asked to adopt different arm positions in standing and sitting. The absolute reposition errors of lumbar lordosis and sacral orientation between two consecutive repetitions were assessed with a non-radiological back measurement system. FINDINGS: During standing at the relaxed arm position, the median absolute reposition errors of lumbar lordosis and sacral orientation were 1.14° (range 0.23°-3.80°) and 0.92° (range 0.17°-3.27°), respectively, which increased to 1.75° (range 0.21-4.97°) and 1.36° (range 0.35°-4.08°) during sitting (Pâ¯<â¯0.01). The absolute reposition error of lumbar lordosis was non-significantly lower at the relaxed and clasped arm positions than at other arm positions. Between the first two repetitions, the absolute reposition errors of both, lumbar lordosis and sacral orientation, were greater than between the remaining two consecutive repetitions (Pâ¯<â¯0.01). Both during standing and sitting, lumbar lordosis was smallest when hands holding two bars (Pâ¯<â¯0.05). INTERPRETATION: Sitting showed a worse reproducibility than standing. When assessing sagittal spinal balance, the clasped arm position during standing is recommended and an initial trial can help to reduce inception irreproducibility.
Assuntos
Lordose/diagnóstico por imagem , Vértebras Lombares/diagnóstico por imagem , Postura Sentada , Posição Ortostática , Adulto , Feminino , Humanos , Vértebras Lombares/fisiologia , Masculino , Postura , Radiografia , Reprodutibilidade dos Testes , Sacro , Adulto JovemRESUMO
Nucleotomy is the gold standard treatment for disc herniation and has proven ability to restore stability by creating a bony bridge without any additional fixation. However, the evolution of mineral density in the extant and new bone after nucleotomy and fixation techniques has to date not been investigated in detail. The main goal of this study is to determine possible mechanisms that may trigger the bone remodelling and formation processes. With that purpose, a finite element model of the L4-L5 spinal segment was used. Bone mineral density (BMD), new tissue composition, and endplate deflection were determined as indicators of lumbar fusion. A bone-remodelling algorithm and a tissue-healing algorithm, both mechanically driven, were implemented to predict vertebral bone alterations and fusion patterns after nucleotomy, internal fixation, and anterior plate placement. When considering an intact disc height, neither nucleotomy nor internal fixation were able to provide the necessary stability to promote bony fusion. However, when 75% of the disc height was considered, bone fusion was predicted for both techniques. By contrast, an anterior plate allowed bone fusion at all disc heights. A 50% disc-height reduction led to osteophyte formation in all cases. Changes in the intervertebral disc tissue caused BMD alterations in the endplates. From this observations it can be drawn that fusion may be self-induced by controlling the mechanical stabilisation without the need of additional fixation. The amount of tissue to be removed to achieve this stabilisation remains to be determined.
Assuntos
Remodelação Óssea , Discotomia Percutânea , Osteogênese , Fusão Vertebral , Algoritmos , Densidade Óssea , Simulação por Computador , Análise de Elementos Finitos , Humanos , Disco Intervertebral/fisiologia , Disco Intervertebral/cirurgia , Vértebras Lombares/fisiologia , Vértebras Lombares/cirurgiaRESUMO
BACKGROUND CONTEXT: Intervertebral disc degeneration has been subject to numerous in vivo and in vitro investigations and numerical studies during recent decades, reporting partially contradictory findings. However, most of the previous studies were limited in the number of specimens investigated and, therefore, could not consider the vast variety of the specimen geometries, which are likely to strongly influence the mechanical behavior of the spine. PURPOSE: To complement the understanding of the mechanical consequences of disc degeneration, whereas considering natural variations in the major spinal geometrical parameters. DESIGN/SETTING: A probabilistic finite element study. METHODS: A parametric finite element model of a human L4-L5 motion segment considering 40 geometrical parameters was developed. One thousand individual geometries comprising four degeneration grades were generated in a probabilistic manner, and the influence of the severity of disc degeneration on the mechanical response of the motion segment to different loading conditions was statistically evaluated. RESULTS: Variations in the individual structural parameters resulted in marked variations in all evaluated parameters within each degeneration grade. Nevertheless, the effect of degeneration in almost all evaluated response values was statistically significant. With degeneration, the intradiscal pressure progressively decreased. At the same time, the facet loads increased and the ligament tension was reduced. The initially nonlinear load-deformation relationships became linear whereas the segment stiffness increased. CONCLUSIONS: Results indicate significant stiffening of the motion segment with progressing degeneration and gradually increasing loading of the facets from nondegenerated to moderately degenerated conditions along with a significant reduction of the ligament tension in flexion.
Assuntos
Degeneração do Disco Intervertebral/fisiopatologia , Vértebras Lombares/fisiopatologia , Fenômenos Biomecânicos , Análise de Elementos Finitos , Humanos , Disco Intervertebral/fisiopatologia , Modelos Estatísticos , Amplitude de Movimento Articular/fisiologiaRESUMO
A comprehensive knowledge of the thoracic shape and kinematics is essential for effective risk prevention, diagnose and proper management of thoracic disorders and assessment of treatment or rehabilitation strategies as well as for in silico and in vitro models for realistic applications of boundary conditions. After an extensive search of the existing literature, this study summarizes 45 studies on in vivo thoracic kyphosis and kinematics and creates a systematic and detailed database. The thoracic kyphosis over T1-12 determined using non-radiological devices (34°) was relatively less than measured using radiological devices (40°) during standing. The majority of kinematical measurements are based on non-radiological devices. The thoracic range of motion (RoM) was greatest during axial rotation (40°), followed by lateral bending (26°), and flexion (21°) when determined using non-radiological devices during standing. The smallest RoM was identified during extension (13°). The lower thoracic level (T8-12) contributed more to the RoM than the upper (T1-4) and middle (T4-8) levels during flexion and lateral bending. During axial rotation and extension, the middle level (T4-8) contributed the most. Coupled motion was evident, mostly during lateral bending and axial rotation. With aging, the thoracic kyphosis increased by about 3° per decade, whereas the RoM decreased by about 5° per decade for all load directions. These changes with aging mainly occurred in the lower region (T6-12). The influence of sex on thoracic kyphosis and the RoM has been described as partly contradictory. Obesity was found to decrease the thoracic RoM. Studies comparing standing, sitting and lying reported the effect of posture as significant.
Assuntos
Doenças Assintomáticas , Movimento , Vértebras Torácicas/patologia , Vértebras Torácicas/fisiopatologia , Adulto , Fenômenos Biomecânicos , Humanos , Cifose/patologia , Cifose/fisiopatologia , Postura , Amplitude de Movimento ArticularRESUMO
BACKGROUND CONTEXT: Sacral slope and lumbar lordosis (LL) have been studied extensively in recent years via X-ray examinations and strongly correlate with each other. This raises, first, the question of the reproducibility of this correlation in multiple standing phases and, second, if this correlation can be achieved using non-radiological measurement tools. PURPOSE: This study aimed (1) to determine the extent to which the back-shape measurements correspond to the correlations between the sacral slope and LL found in previous radiological investigations, (2) to identify a possible effect of age and gender on this correlation, and (3) to evaluate the extent to which this correlation is affected by repeated standing phases. STUDY DESIGN/SAMPLE: This is an observational cohort study. PATIENT SAMPLE: A total of 410 asymptomatic subjects (non-athletes), 21 asymptomatic soccer players (athletes), and 176 patients with low back pain (LBP) were included. OUTCOME MEASURES: The correlation between sacrum orientation (SO) and LL was determined in six repetitive upright standing postures. MATERIALS AND METHODS: A non-invasive strain-gauge based measuring system was used. RESULTS: Back-shape measurements yielded a similar correlation to that measured in previous X-ray examinations. The coefficient of determination (R2) between SO and LL ranged between 0.76 and 0.79 for the asymptomatic cohort. Athletes showed the strongest correlation (0.76≤R2≤0.84). For patients with LBP, the correlation substantially decreased (0.18≤R2≤0.39). R2 was not strongly affected by repeated standing phases. CONCLUSIONS: The correlation between SO and LL can be assessed by surface measurements of the back shape and is not influenced by natural variations in the standing posture.
Assuntos
Lordose/diagnóstico por imagem , Adulto , Idoso , Idoso de 80 Anos ou mais , Estudos de Casos e Controles , Feminino , Humanos , Vértebras Lombares/diagnóstico por imagem , Masculino , Pessoa de Meia-Idade , Postura , Radiografia , Sacro/diagnóstico por imagemRESUMO
Cervical-flexibility examination is routinely performed in neck-pain patients. However, diagnosis of cervical-flexibility impairment requires physiological reference values, which vary widely among the population. Although there is a general understanding that the cervical range of motion (RoM) alters with age and sex, the consolidated details of these variations remain lacking. A systematic review and meta-analysis was performed to evaluate the difference of cervical RoM in different age and sex populations. The quality-assessment tool for quantitative studies was applied to assess methodological quality. We identified 4,034 abstracts through a database search and 3 publications through a manual search. Thirty-four cross-sectional studies were selected for the systematic review and measuring technologies were identified. The difference in age descriptions was substantial and a strong discrepancy existed between the mobility measured by radiological and non-radiological devices. Therefore, only 11 non-radiological studies with similar age descriptions were selected for meta-analysis. Cervical RoMs varied considerably among the populations and generally decreased with age. However, this diminishment started earlier and ended later in males, and was not continuous across age in both sexes. Females normally displayed a greater RoM than males, except in lateral bending. In young subjects, the difference between males and females was not significant. For subjects in their 50s, males displayed a non-significantly greater RoM than females. The variability of cervical RoMs can be explained by different devices as well as age and sex. However, the age-dependent reduction is not continuous and differs between males and females. These findings lay the foundation for a better understanding of the incidence of age- and sex-dependent cervical disorders, and may have important implications for the long-term success of different clinical interventions.
Assuntos
Envelhecimento/fisiologia , Vértebras Cervicais/fisiologia , Caracteres Sexuais , Humanos , Amplitude de Movimento ArticularRESUMO
The mechanical environment is a primary factor in the success of distraction osteogenesis. It is known that the interfragmentary movement during the distraction and maturation phase effects the callus formation. In addition to cyclic compression, other movements like shear and bending influence the bone formation process as shown in previous callus distraction studies. Reports of cartilage presence and endochondral ossification in the regenerative zone have been associated with a lack of fixation stability and delayed healing. So far the effects of the direction of interfragmentary movements could not be studied separately. By means of a unique lateral callus distraction model, we investigated the effects of small (0.1 mm) and moderate (0.6 mm), purely axial compression on ossification during callus maturation in sheep. A distraction device incorporating a mobile titanium plate was mounted on the tibia. Following lateral callus distraction, electromechanically controlled movements allowed purely axial cyclic compression of the tissue regenerate. Seven weeks post-operatively, the tissue regenerates were investigated using µCT, histology and immunohistochemistry. The larger amplitude significantly increased bone formation (Fractional bone volume: 19.4% vs. 5.2%, p = 0.03; trabecular thickness: 0.1 mm vs. 0.06 mm, p = 0.006; mean spicule height: 2.6 mm vs. 1.1 mm, p = 0.02) however, no endochondral ossification occurred. The elimination of shear movement, unimpaired neovascularization as well as the tensile strain stimuli during the distraction phase suppressing chondrogenic differentiation may all contribute to the absence of cartilage. In clinical application of distraction osteogenesis, moderate axial interfragmentary movement augments intramembranous ossification provided shear strain is minimized.
Assuntos
Calo Ósseo/fisiologia , Calo Ósseo/cirurgia , Osteogênese por Distração/métodos , Animais , Fenômenos Biomecânicos , Calo Ósseo/diagnóstico por imagem , Colágeno Tipo II/metabolismo , Subunidade alfa 1 de Fator de Ligação ao Core/metabolismo , Desenho de Equipamento , Fixadores Externos , Feminino , Imuno-Histoquímica , Modelos Animais , Osteogênese , Osteogênese por Distração/instrumentação , Fatores de Transcrição SOX9/metabolismo , Carneiro Doméstico , Estresse Mecânico , Tíbia/diagnóstico por imagem , Tíbia/fisiologia , Tíbia/cirurgia , Microtomografia por Raio-XRESUMO
Callus distraction is sometimes associated with a delay in the maturation process and serious complications. It is believed that these complications are often caused by instability of the bone segment fixation. Typical fixation devices, such as ring-fixators, show significant deformations in all directions under external loading and muscle forces. This leads to axial compression and tension as well as shear movements in the healing area. Herein we investigated the hypothesis that the direction of interfragmentary movement after callus distraction affects the bone formation and revascularization during the maturation process. Two custom fixator systems were designed to apply a protocol of lateral callus distraction and subsequent cyclic stimulation of the regenerate tissue. One fixator system was used to apply either compressive or tensile stimulation while the other was used to apply shearing stimulation. The fixators were applied to the tibial surface of the right hind leg of sheep specimens. During lateral callus distraction, a titanium plate was elevated by 0.275 mm perpendicular to the long axis of the bone twice daily, resulting in a 5.5 mm gap at the end of the ten-day distraction phase. Following a seven-day consolidation phase, the regenerate in the gap between tibial cortex and titanium plate was stimulated once daily by cyclic movement for 120 cycles. The stimulation was applied for 18 days with amplitudes of 0.6 mm in compression (Group C) or tension (Group T), or a 1.0 mm shear amplitude (Group S). Seven weeks postoperatively the specimens were analyzed for quantity of bone formation, the presence of cartilage and fibrous tissue, and blood vessel density. There was a significantly higher blood vessel density (4.6 ± 1.6%) in Group C than in Group T (1.2 ± 0.4%) or Group S (1.0 ± 0.5%) (p < 0.01). The amount of bone was significantly higher in Group C (25.6% ± 13.0%) than in Group T (13.5 ± 4.9%) (p < 0.05). Group S showed a similar amount of bone (14.0 ± 10.7%) to Group T. The results show that bone formation and revascularization are dependent on the direction of interfragmentary movement and that the cyclic compression best stimulates the healing process.
Assuntos
Osteogênese por Distração/instrumentação , Osteogênese , Tíbia/irrigação sanguínea , Tíbia/cirurgia , Animais , Fenômenos Biomecânicos , Calo Ósseo/irrigação sanguínea , Calo Ósseo/fisiologia , Calo Ósseo/cirurgia , Força Compressiva , Fixadores Externos , Feminino , Fixação Interna de Fraturas/instrumentação , Fixação Interna de Fraturas/métodos , Consolidação da Fratura , Osteogênese por Distração/métodos , Ovinos , Estresse Mecânico , Tíbia/fisiologiaRESUMO
An irreproducible standing posture can lead to mis-interpretation of radiological measurements, wrong diagnoses and possibly unnecessary treatment. This study aimed to evaluate the differences in lumbar lordosis and sacrum orientation in six repetitive upright standing postures of 353 asymptomatic subjects (including 332 non-athletes and 21 athletes - soccer players) and 83 low back pain (LBP) patients using a non-invasive back-shape measurement device. In the standing position, all investigated cohorts displayed a large inter-subject variability in sacrum orientation (â¼40°) and lumbar lordosis (â¼53°). In the asymptomatic cohort (non-athletes), 51% of the subjects showed variations in lumbar lordosis of 10-20% in six repeated standing phases and 29% showed variations of even more than 20%. In the sacrum orientation, 53% of all asymptomatic subjects revealed variations of >20% and 31% of even more than 30%. It can be concluded that standing is highly individual and poorly reproducible. The reproducibility was independent of age, gender, body height and weight. LBP patients and athletes showed a similar variability as the asymptomatic cohort. The number of standing phases performed showed no positive effect on the reproducibility. Therefore, the variability in standing is not predictable but random, and thus does not reflect an individual specific behavioral pattern which can be reduced, for example, by repeated standing phases.
Assuntos
Dor Lombar/fisiopatologia , Posição Ortostática , Adulto , Idoso , Idoso de 80 Anos ou mais , Atletas , Feminino , Humanos , Lordose/fisiopatologia , Vértebras Lombares/fisiologia , Masculino , Pessoa de Meia-Idade , Reprodutibilidade dos Testes , Sacro/fisiologia , Adulto JovemRESUMO
Calcium phosphate cements (CPCs) are widely used for bone-defect treatment. Current developments comprise the fabrication of porous scaffolds by three-dimensional plotting and doting using biologically active substances, such as strontium. Strontium is known to increase osteoblast activity and simultaneously to decrease osteoclast resorption. This study investigated the short- and long-term in vivo performances of strontium(II)-doted CPC (SrCPC) scaffolds compared to non-doted CPC scaffolds after implantation in unloaded or load-bearing trabecular bone defects in sheep. After 6 weeks, both CPC and SrCPC scaffolds exhibited good biocompatibility and osseointegration. Fluorochrome labeling revealed that both scaffolds were penetrated by newly formed bone already after 4 weeks. Neither strontium doting nor mechanical loading significantly influenced early bone formation. In contrast, after 6 months, bone formation was significantly enhanced in SrCPC compared to CPC scaffolds. Energy dispersive X-ray analysis demonstrated the release of strontium from the SrCPC into the bone. Strontium addition did not significantly influence material resorption or osteoclast formation. Mechanical loading significantly stimulated bone formation in both CPC and SrCPC scaffolds after 6 months without impairing scaffold integrity. The most bone was found in SrCPC scaffolds under load-bearing conditions. Concluding, these results demonstrate that strontium doting and mechanical loading additively stimulated bone formation in CPC scaffolds and that the scaffolds exhibited mechanical stability under moderate load, implying good clinical suitability. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:106-117, 2018.
Assuntos
Cimentos Ósseos , Fosfatos de Cálcio/química , Osteogênese/efeitos dos fármacos , Estrôncio/farmacologia , Alicerces Teciduais , Animais , Feminino , Osseointegração , Ovinos , Estresse MecânicoRESUMO
Approximately 5,168 large animals (pigs, sheep, goats, and cattle) were used for intervertebral disc research in identified studies published between 1985 and 2016. Most of the reviewed studies revealed a low scientific impact, a lack of sound justifications for the animal models, and a number of deficiencies in the documentation of the animal experimentation. The scientific community should take suitable measures to investigate the presumption that animal models have translational value in intervertebral disc research. Recommendations for future investigations are provided to improve the quality, validity, and usefulness of animal studies for intervertebral disc research. More in vivo studies are warranted to comprehensively evaluate the suitability of animal models in various applications and help place animal models as an integral, complementary part of intervertebral disc research.