Submicronic Laue diffraction to determine in-depth strain in very closely matched complex HgCdTe/CdZnTe heterostructures with a 10-5 resolution.

Cross-sectional submicronic Laue diffraction has been successfully applied to HgCdTe/CdZnTe heterostructures to provide accurate strain profiles from substrate to surface. Combined with chemical-sensitive techniques, this approach allows correlation of lattice-mismatch, interface compositional gradient and strain while isolating specific layer contributions which would otherwise be averaged using conventional X-ray diffraction. The submicronic spatial resolution allowed by the synchrotron white beam size is particularly suited to complex infrared detector designed structures such as dual-color detectors. The extreme strain resolution of 10-5 required for the very low lattice-mismatch system HgCdTe/CdZnTe is demonstrated.

Elaboration and characterization of a 200 mm stretchable and flexible ultra-thin semi-conductor film.

We describe a process for transferring a 200 nm thick, 200 mm wide monocrystalline silicon (mono c-Si) thin film from a silicon-on-insulator onto a flexible polymer substrate. The result is a stretchable and flexible ultra-thin semi-conductor film that can be subjected to tensile stress experiments. The process uses off-the-shelf 200 mm wafers and standard polymer temporary bonding techniques. The backside substrate and buried oxide are removed using grinding and wet etching processes. No cracks or wrinkles are observed on the film prior to the tensile stress experiments. The stretching of the flexible structure results in up to 1.5% uniaxial tensile elastic strain on the thin mono c-Si film.

Crack Front Interaction with Self-Emitted Acoustic Waves.

The interaction of a propagating crack in implanted silicon with self-emitted acoustic waves results in periodic patterns on fractured surfaces. Direct measurement of the acoustic emission ahead of the fracture front shows the emergence of dominant acoustic frequency related to the crack velocity. It is shown that the surface modifications are made of roughness modulations due to periodic deviations of the crack front. A physical mechanism explaining the pattern formation is proposed, well in agreement with the observed pattern wavelengths.

Hydrated cholesterol: phospholipid domains probed by synchrotron radiation.

X-ray scattering experiments on mixed films of cholesterol and phospholipids at air-water and Si solid-water interfaces were undertaken to glean information on pathological crystallization of cholesterol bilayers. Grazing-incidence X-ray diffraction patterns at the air-water interface of various cholesterol:dipalmitoyl-phosphatidylcholine (Ch:DPPC) monolayer mixtures compressed beyond monolayer collapse yielded the established 10 x 7.5 Ų Ch bilayer motif, for Ch:DPPC molar ratios higher than 2.5:1. Attempts to obtain a diffraction signal from various Ch:phospholipid film mixtures at the Si solid-water interface, indicative of the presence of the Ch bilayer motif, were unsuccessful. Only after removal of sufficient water from the cell was a weak diffraction signal obtained suggestive of a cholesterol film two bilayers thick. Off-specular X-ray reflectivity measurements made on a 1.75:1 mixture of Ch and bovine cardiac phosphatidylcholine (BCPC) deposited as a bilayer on a Si wafer and placed in a cell filled with water yielded positive results. The derived electron density profile showed the presence of a bilayer mixture consistent with a phase separation of cholesterol and BCPC, and possible formation of a crystalline cholesterol bilayer within the hydrated mixed bilayer, but not a proof thereof.

New reactor dedicated to in operando studies of model catalysts by means of surface x-ray diffraction and grazing incidence small angle x-ray scattering.

A new experimental setup has been developed to enable in situ studies of catalyst surfaces during chemical reactions by means of surface x-ray diffraction (SXRD) and grazing incidence small angle x-ray scattering. The x-ray reactor chamber was designed for both ultrahigh-vacuum (UHV) and reactive gas environments. A laser beam heating of the sample was implemented; the sample temperature reaches 1100 K in UHV and 600 K in the presence of reactive gases. The reactor equipment allows dynamical observations of the surface with various, perfectly mixed gases at controlled partial pressures. It can run in two modes: as a bath reactor in the pressure range of 1-1000 mbars and as a continuous flow cell for pressure lower than 10(-3) mbar. The reactor is connected to an UHV preparation chamber also equipped with low energy electron diffraction and Auger spectroscopy. This setup is thus perfectly well suited to extend in situ studies to more complex surfaces, such as epitaxial films or supported nanoparticles. It offers the possibility to follow the chemically induced changes of the morphology, the structure, the composition, and growth processes of the model catalyst surface during exposure to reactive gases. As an example the Pd(8)Ni(92)(110) surface structure was followed by SXRD under a few millibars of hydrogen and during butadiene hydrogenation while the reaction was monitored by quadrupole mass spectrometry. This experiment evidenced the great sensitivity of the diffracted intensity to the subtle interaction between the surface atoms and the gas molecules.

A new white beam x-ray microdiffraction setup on the BM32 beamline at the European Synchrotron Radiation Facility.

A white beam microdiffraction setup has been developed on the bending magnet source BM32 at the European Synchrotron Radiation Facility. The instrument allows routine submicrometer beam diffraction to perform orientation and strain mapping of polycrystalline samples. The setup features large source to optics distances allowing large demagnification ratios and small beam sizes. The optics of the beamline is used for beam conditioning upstream a secondary source, suppressing any possible interference of beam conditioning on beam size and position. The setup has been designed for an easy and efficient operation with position control tools embedded on the sample stage, a high magnification large aperture optical microscope, and fast readout detectors. Switching from the white beam mode to the monochromatic mode is made easy by an automatic procedure and allows the determination of both the deviatoric and hydrostatic strain tensors.

Dynamics of a bonding front.

A description of the bonding front propagation between two adhesive plates is proposed. The model relates the velocity of a bonding front to the adhesion energy, with application to wafer direct bonding. Its derivation is based on a competition between the bonding energy and the viscous drag of the air flow in the gap between the two wafers. The model describes well the experimental data, including the wafer deformation profile during bonding or the dependence of the velocity on the gas viscosity, pressure, and wafer thickness.

Structure and fluctuations of a single floating lipid bilayer.

A single lipid molecular bilayer of 17 or 18 carbon chain phosphocholines, floating in water near a flat wall, is prepared in the bilayer gel phase and then heated to the fluid phase. Its structure (electron density profile) and height fluctuations are determined by using x-ray reflectivity and non-specular scattering. By fitting the off-specular signal to that calculated for a two-dimensional membrane using a Helfrich Hamiltonian, we determine the three main physical quantities that govern the bilayer height fluctuations: The wall attraction potential is unexpectedly low; the surface tension, roughly independent on chain length and temperature, is moderate (approximately 5 x 10(-4) J.m(-2)) but large enough to dominate the intermediate range of the fluctuation spectrum; and the bending modulus abruptly decreases by an order-of-magnitude from 10(-18) J to 10(-19) J at the bilayer gel-to-fluid transition.

Spreading dynamics of water droplets

The spreading dynamics of water droplets on flat silicon surfaces is investigated. It is shown that, for situations close to complete wetting, the radius evolution with time can be described using a power law with a nonstandard exponent of 1/7. This dynamics is interpreted using a hydrodynamic model with an invariant dissipation profile. Such a description is also consistent with the slow dynamics observed for larger contact angles.

Dewetting of solid-supported multilamellar lipid layers.

Thin multilamellar assemblies of neutral lipid bilayers deposited on silicon substrates are shown to be unstable upon hydration. We analyze the stability of these systems taking into account a reduction of the fluctuation-related components of the bilayer interaction potential. The sizes of the patterns observed are consistent with a spinodal dewetting process.