Dynamic accelerated stress test and coupled on-line analysis program to elucidate aging processes in proton exchange membrane fuel cells.

The application of hydrogen proton exchange membrane fuel cells (PEMFC) in greenhouse gas emission free heavy-duty vehicles requires extremely durable PEMFC components with service lives in the range of 30,000 h. Hence suitable test and analysis methods are required that reflect realistic operation scenarios, but significantly accelerate aging. For this purpose, a dynamic accelerated stress test was developed, which is coupled with a comprehensive in-depth in-situ and ex-situ analysis program to determine the aging processes of a PEMFC membrane electrode assembly (MEA). The test comprehends dynamic cycling between low, moderate and high load, different temperature and humidity conditions as well as recovery sequences to distinguish between reversible and irreversible failure modes. All phases of the PEMFC system (i.e. solid, liquid and gaseous) are monitored on-line during aging by sophisticated electrochemical, mass spectrometric and ion chromatographic analytical methods. The structural and elemental composition of the MEA before and after the aging program (post-mortem) are investigated by X-ray fluorescence, scanning and transmission electron microscopy. This program was able to age a commercial PEMFC to end-of-life in 1000 h, while providing an accurate picture of the aging processes involved.

In situ observation of oscillatory redox dynamics of copper.

How a catalyst behaves microscopically under reaction conditions, and what kinds of active sites transiently exist on its surface, is still very much a mystery to the scientific community. Here we present an in situ study on the red-ox behaviour of copper in the model reaction of hydrogen oxidation. Direct imaging combined with on-line mass spectroscopy shows that activity emerges near a phase boundary, where complex spatio-temporal dynamics are induced by the competing action of simultaneously present oxidizing and reducing agents. Using a combination of in situ imaging with in situ X-ray absorption spectroscopy and scanning photoemission microscopy, we reveal the relation between chemical and morphological dynamics and demonstrate that a static picture of active sites is insufficient to describe catalytic function of redox-active metal catalysts. The observed oscillatory redox dynamics provide a unique insight on phase-cooperation and a convenient and general mechanism for constant re-generation of transient active sites.

Facile synthesis of carbon nanotube/natural bentonite composites as a stable catalyst for styrene synthesis.

Natural bentonite mineral, without any wet chemical treatment, was used directly to catalyze the growth of multi-wall CNTs and the produced CNTs/bentonite as an integrated composite stably catalyzed the oxidative dehydrogenation reaction over a long period of time; this concept provides a highly economical way for large-scale synthesis of nanocarbons and manufacture of styrene synthesis catalysts.

History effects in lithium-oxygen batteries: how initial seeding influences the discharge capacity.

In laboratory experiments, Li-O2 systems show "sudden death" at capacities far below the theoretical value. Identifying how discharge products limit the total capacity is crucial in Li-O2 system. We investigated the effect of Li2O2 seed layer deposited on carbon cathode under potentiostatic conditions at increasing overpotentials to the subsequent slow discharge at galvanostatic condition. The discharge capacity attainable in the second step is found to vary by more than a factor of 3 depending on the history, i.e., the seed layer. These results provide evidence that the battery history is decisive for the total discharge capacities.

Oxidative purification of carbon nanotubes and its impact on catalytic performance in oxidative dehydrogenation reactions.

Oxidative purification with mild diluted HNO3 followed by NaOH washing lowers the amount of amorphous carbon attached to multiwalled carbon nanotubes (CNTs). The graphitic structure improves remarkably by further annealing in argon at elevated temperatures, that is, 1173, 1573, and 1973 K. The influence of the purification treatment on the catalytic activity of the CNTs is investigated for the oxidative dehydrogenation (ODH) of ethylbenzene and propane as probe reactions. All samples tend to approach an appropriately ordered structure and Raman analysis of the used samples displays a D/G band ratio of 0.95-1.42. Oxygen functionalities are partly removed by the annealing treatment and can be rebuilt to some extent by oxygen molecules in the ODH reactant flow. The presence of amorphous carbon is detrimental to the catalytic performance as it allows for unwanted functional groups occurring in parallel with the formation of the selective (di)ketonic active sites.