RESUMO
Molecules present a versatile platform for quantum information science1,2 and are candidates for sensing and computation applications3,4. Robust spin-optical interfaces are key to harnessing the quantum resources of materials5. To date, carbon-based candidates have been non-luminescent6,7, which prevents optical readout via emission. Here we report organic molecules showing both efficient luminescence and near-unity generation yield of excited states with spin multiplicity S > 1. This was achieved by designing an energy resonance between emissive doublet and triplet levels, here on covalently coupled tris(2,4,6-trichlorophenyl) methyl-carbazole radicals and anthracene. We observed that the doublet photoexcitation delocalized onto the linked acene within a few picoseconds and subsequently evolved to a pure high-spin state (quartet for monoradical, quintet for biradical) of mixed radical-triplet character near 1.8 eV. These high-spin states are coherently addressable with microwaves even at 295 K, with optical readout enabled by reverse intersystem crossing to emissive states. Furthermore, for the biradical, on return to the ground state the previously uncorrelated radical spins either side of the anthracene shows strong spin correlation. Our approach simultaneously supports a high efficiency of initialization, spin manipulations and light-based readout at room temperature. The integration of luminescence and high-spin states creates an organic materials platform for emerging quantum technologies.
RESUMO
Carbene-metal-amides (CMAs) are emerging delayed fluorescence materials for organic light-emitting diode (OLED) applications. CMAs possess fast, efficient emission owing to rapid forward and reverse intersystem crossing (ISC) rates. The resulting dynamic equilibrium between singlet and triplet spin manifolds distinguishes CMAs from most purely organic thermally activated delayed fluorescence emitters. However, direct experimental triplet characterization in CMAs is underutilized, limiting our detailed understanding of the ISC mechanism. In this work, we combine time-resolved spectroscopy with tuning of state energies through environmental polarity and metal substitution, focusing on the interplay between charge-transfer (3CT) and local exciton (3LE) triplets. Unlike previous photophysical work, we investigate evaporated host : guest films of CMAs and small-molecule hosts for increased device relevance. Transient absorption reveals an evolution in the triplet excited-state absorption (ESA) consistent with a change in orbital character between hosts with differing dielectric constants. Using quantum chemical calculations, we simulate ESAs of the lowest triplet states, highlighting the contribution of only 3CT and donor-moiety 3LE states to spectral features, with no strong evidence for a low-lying acceptor-centered 3LE. Thus, our work provides a blueprint for understanding the role of triplet excited states in CMAs which will enable further intelligent optimization of this promising class of materials.
RESUMO
Gold-centered carbene-metal-amides (CMAs) containing cyclic (alkyl)(amino)carbenes (CAACs) are promising emitters for thermally activated delayed fluorescence (TADF). Aiming at the design and optimization of new TADF emitters, we report a density functional theory study of over 60 CMAs with various CAAC ligands, systematically evaluating computed parameters in relation to photoluminescence properties. The CMA structures were primarily selected based on experimental synthesis prospects. We demonstrate that TADF efficiency of the CMA materials originates from a compromise between oscillator strength coefficients and exchange energy (ΔEST). The latter is governed by the overlap of HOMO and LUMO orbitals, where HOMO is localized on the amide and LUMO over the Au-carbene bond. The S0 ground and excited T1 states of the CMAs adopt approximately coplanar geometry of carbene and amide ligands, but rotate perpendicular in the excited S1 states, resulting in degeneracy or near-degeneracy of S1 and T1, accompanied by a decrease in the S1-S0 oscillator strength from its maximum at coplanar geometries to near zero at rotated geometries. Based on the computations, promising new TADF emitters are proposed and synthesized. Bright CMA complex (Et2CAAC)Au(carbazolide) is obtained and fully characterized in order to demonstrate that excellent stability and high radiative rates up to 106 s-1 can be obtained for the gold-CMA complexes with small CAAC-carbene ligands.
Assuntos
Amidas , Ouro , Fluorescência , LigantesRESUMO
Copper-centered carbene-metal-halides (CMHs) with cyclic (alkyl)(amino) carbenes (CAACs) are bright phosphorescent emitters and key precursors in the synthesis of the highly promising class of the materials carbene-metal-amides (CMAs) operating via thermally activated delayed fluorescence (TADF). Aiming to reveal the molecular geometry for CMH phosphors in the absence of the intermolecular contacts, we report here the equilibrium molecular structure of the (CAAC)Cu(I)Cl (1) molecule in the gas-phase. We demonstrate that linear geometry around a copper atom shows no distortions in the ground state. The structure of complex 1 has been determined using the electron diffraction method, supported by quantum chemical calculations with RI-MP2/def2-QZVPP level of theory and compared with the crystal structure determined by X-ray diffraction analysis. Mean vibrational amplitudes, uij,h1, and anharmonic vibrational corrections (rij,e ⢠rij,a) were calculated for experimental temperature T = 20 °C, using quadratic and cubic force constants, respectively. The quantum theory of atoms in molecules (QTAIM) and natural bond order (NBO) analysis of wave function at MN15/def2TZVP level of theory revealed two Cu H, three H H, and one three-center H H H bond paths with bond critical points. NBO analysis also revealed three-center, four-electron hyperbonds, (3c4e), [π(N-C) nπ(Cu) â nπ(N) π(N-Cu)], or [N-C: Cu â N: C-Cu] and nπ(Cu) â π(C-N)* hyperconjugation, that is the delocalization of the lone electron pair of Cu atom into the antibonding orbital of C-N bond.
RESUMO
Organic thermally activated delayed fluorescence (TADF) materials have been widely investigated due to their impressive electronic properties and applied potential for the third generation of organic light-emitting diodes (OLED). We present organic TADF material (4BGIPN) based on the strained benzoguanidine donor and compare it with the benchmark carbazole-based material (4CzIPN). Extended π-conjugation in 4BGIPN material results in yellow-green luminescence at 512 nm with a fast radiative rate of 5.5 × 10-5 s-1 and a photoluminescence quantum yield of 46% in methylcyclohexane solution. Such a nitrogen-rich 4BGIPN material has a significantly stabilized highest occupied molecular orbital (HOMO) at -6.4 eV while the lowest unoccupied molecular orbital (LUMO) at -4.0 eV, indicating potential suitability for application as the electron transport layer or TADF class III emitter in OLEDs.
RESUMO
The first derivative of the methylium cation with the triple-decker substituent, [CpCo(C3 B2 Me5 )RuC5 Me4 CH2 ]PF6 (2PF6 ), was synthesized from the reaction of the triple-decker complex CpCo(C3 B2 Me5 )RuCp* (1) with the salt of the trityl cation [CPh3 ]+ . The X-ray crystal structure of 2PF6 reveals that the methylium carbon is bound to the ruthenium with Ru-C bond length of 2.259â Å and corresponds to the description of its structure as η6 -fulvene-ruthenium. Reactions of 2PF6 with nucleophiles OH- , Ph3 P, Et3 N led to the corresponding derivatives of 1 in high yields. Aromatic amines PhNEt2 and 4-MeC6 H4 NH2 react with 2PF6 to give the electrophilic aromatic substitution products quantitatively. Chemical reduction of 2PF6 with Zn powder in tetrahydrofuran leads to the formation of the bis(triple-decker) derivative (CpCo(C3 B2 Me5 )RuC5 Me4 CH2 )2 (10) with a CH2 CH2 -bridge. The structures of complexes 4, 7-10 were determined by X-ray diffraction. Density functional calculations support the crystallographically determined geometry of 2 and allow rationalization of some characteristics of its structure, spectroscopy, and reactivity.
RESUMO
Copper and gold halide and pseudo-halide complexes stabilised by methyl-, ethyl- and adamantyl-substituted cyclic (alkyl)(amino)carbene (CAAC) ligands are mostly linear monomers in the solid state, without aurophilic Auâ â â Au interactions. (Et2 L)CuCl shows the highest photoluminescence quantum yield (PLQY) in the series, 70 %. The photoemissions of Me2 L and Et2 L copper halide complexes show S1 âS0 fluorescence on the ns time scale, in agreement with theory, as well as a long-lived emission. Monomeric (Me2 L)CuNCS is a white emitter, whereas dimeric [(Et2 L)Cu(µ-NCS)]2 shows intense yellow emission with a photoluminescence (PL) quantum yield of 49 %. The reaction of (Ad L)MCl (M=Cu or Au) with phenols ArOH (Ar=Ph, 2,6-F2 C6 H3 , 2,6-Me2 C6 H3 , 3,5-tBu2 C6 H3 , 2-tBu-5-MeC6 H3 , 2-pyridyl), thiophenol, or aromatic amines H2 NAr'' (Ar'=Ph, 3,5-(CF3 )2 C6 H3 , C6 F5 , 2-py) afforded the corresponding phenolato, thiophenolato and amido complexes. Although the emission wavelengths are only marginally affected by the ring substitution pattern, the PL intensities respond sensitively to the presence of substituents in the ortho or meta positions. In gold aryloxides, PL is controlled by steric factors, with strong luminescence in compounds with Au-O-C-C torsion angles <50°. Calculations confirm the dependence of oscillator strength on the torsion angle, as well as the inter-ligand charge transfer nature of the emission. The HOMO/LUMO energy levels were estimated based on first reduction and oxidation potentials.
RESUMO
A series of halide and pseudohalide gold complexes (DAC)Au(I)X (DAC = N,N'-diamidocarbene; X = Cl, Br, I, and SCN) were prepared in high yields. All complexes possess linear geometry around the gold atom with no aurophilic interactions between neighboring molecules. Reactivity studies for (DAC)Au(I)Cl revealed that the diamido backbone of the carbene ligand is vulnerable to nucleophilic attack by a strong base, potassium tert-butoxide, resulting in cleavage of the carbene backbone and formation of a neutral trigold cluster. Halide and pseudohalide complexes are bright phosphorescent emitters in the solid state, exhibiting photoluminescence quantum yields up to unity. Phosphorescence occurs in the range 480-520 nm with lifetimes as short as 1 µs, resulting in fast radiative rates up to 9.4 × 105 s-1 which is on par with the most efficient heavy metal emitters. Photophysical properties are explained by the intrinsic π-accepting nature of the DAC carbene and are supported by TDDFT calculations.
RESUMO
Spin triplet exciton formation sets limits on technologies using organic semiconductors that are confined to singlet-triplet photophysics. In contrast, excitations in the spin doublet manifold in organic radical semiconductors can show efficient luminescence. Here the dynamics of the spin allowed process of intermolecular energy transfer from triplet to doublet excitons are explored. A carbene-metal-amide (CMA-CF3) is employed as a model triplet donor host, since following photoexcitation it undergoes extremely fast intersystem crossing to generate a population of triplet excitons within 4 ps. This enables a foundational study for tracking energy transfer from triplets to a model radical semiconductor, TTM-3PCz. Over 74% of all radical luminescence originates from the triplet channel in this system under photoexcitation. It is found that intermolecular triplet-to-doublet energy transfer can occur directly and rapidly, with 12% of triplet excitons transferring already on sub-ns timescales. This enhanced triplet harvesting mechanism is utilized in efficient near-infrared organic light-emitting diodes, which can be extended to other opto-electronic and -spintronic technologies by radical-based spin control in molecular semiconductors.
RESUMO
A series of carbene-gold-acetylide complexes [(BiCAAC)AuCC]n C6 H5- n (n = 1, Au1; n = 2, Au2; n = 3, Au3; BiCAAC = bicyclic(alkyl)(amino)carbene) have been synthesized in high yields. Compounds Au1-Au3 exhibit deep-blue to blue-green phosphorescence with good quantum yields up to 43% in all media. An increase of the (BiCAAC)Au moieties in gold complexes Au1-Au3 increases the extinction coefficients in the UV-vis spectra and stronger oscillator strength coefficients supported by theoretical calculations. The luminescence radiative rates decrease with an increase of the (BiCAAC)Au moieties. The time-dependent density functional theory study supports a charge-transfer nature of the phosphorescence due to the large (0.5-0.6 eV) energy gap between singlet excited (S1 ) and triplet excited (T1 ) states. Transient luminescence study reveals the presence of both nonstructured UV prompt-fluorescence and vibronically resolved long-lived phosphorescence 428 nm. Organic light-emitting diodes (OLED) are fabricated by physical vapor deposition with 2,8-bis(diphenylphosphoryl)dibenzo[b,d]furan (PPF) as a host material with complex Au1. The near-UV electroluminescence is observed at 405 nm with device efficiency of 1% while demonstrating OLED device lifetime LT50 up to 20 min at practical brightness of 10 nits, indicating a highly promising class of materials to develop stable UV-OLEDs.
RESUMO
Linear gold complexes of the "carbene-metal-amide" (CMA) type are prepared with a rigid benzoguanidine amide donor and various carbene ligands. These complexes emit in the deep-blue range at 424 and 466 nm with 100% quantum yields in all media. The deep-blue thermally activates delayed fluorescence originates from a charge transfer state with an excited state lifetime as low as 213 ns, resulting in fast radiative rates of 4.7 × 106 s-1. The high thermal and photo-stability of these carbene-metal-amide (CMA) materials enabled the authors to fabricate highly energy-efficient organic light-emitting diodes (OLED) in host-guest architectures. Deep-blue OLED devices with electroluminescence at 416 and 457 nm with practical external quantum efficiencies of up to 23% at 100 cd m-2 with excellent color coordinates CIE (x; y) = 0.16; 0.07 and 0.17; 0.18 are reported. The operating stability of these OLEDs is the longest reported to date (LT50 = 1 h) for deep-blue CMA emitters, indicating a high promise for further development of blue OLED devices. These findings inform the molecular design strategy and correlation between delayed luminescence with high radiative rates and CMA OLED device operating stability.
RESUMO
New phosphorescent "carbene-metal-carboranyl" (CMC) Cu(I) and Au(I) complexes based on the diamidocarbene (DAC) ligand show up to 68% photoluminescence quantum yield and microsecond range lifetimes. CMC organic light emitting diodes (OLEDs) emit sky-blue and warm white electroluminescence.
RESUMO
The structures of tricarbonyl(formylcyclopentadienyl)manganese(I), [Mn(C(6)H(5)O)(CO)(3)], (I), and tricarbonyl(formylcyclopentadienyl)rhenium(I), [Re(C(6)H(5)O)(CO)(3)], (II), were determined at 100 K. Compounds (I) and (II) both possess a carbonyl group in a trans position relative to the substituted C atom of the cyclopentadienyl ring, while the other two carbonyl groups are in almost eclipsed positions relative to their attached C atoms. Analysis of the intermolecular contacts reveals that the molecules in both compounds form stacks due to short attractive π(CO)...π(CO) and π(CO)...π interactions, along the crystallographic c axis for (I) and along the [201] direction for (II). Symmetry-related stacks are bound to each other by weak intermolecular C-H...O hydrogen bonds, leading to the formation of the three-dimensional network.
RESUMO
The molecular design of metal-free organic phosphors is essential for realizing persistent room-temperature phosphorescence (pRTP) despite its spin-forbidden nature. A series of halobenzonitrile-carbazoles has been prepared following a one-pot nucleophilic substitution protocol involving commercially available and laboratory-synthesized carbazoles. We demonstrate how halo- and cyano-substituents affect the molecular geometry in the crystal lattice, resulting in tilt and/or twist of the carbazole with respect to the phenyl moiety. Compounds obtained from the commercially available carbazole result in efficient pRTP of organic phosphors with a high quantum yield of up to 22% and a long excited state lifetime of up to 0.22 s. Compounds obtained from the laboratory-synthesized carbazole exhibit thermally activated delayed fluorescence with an excited state lifetime in the millisecond range. In-depth photophysical studies reveal that luminescence originates from the mixed locally excited state (3LE, nπ*)/charge transfer state.
RESUMO
Carbene-metal-amides (CMAs) are an emerging class of photoemitters based on a linear donor-linker-acceptor arrangement. They exhibit high flexibility about the carbene-metal and metal-amide bonds, leading to a conformational freedom which has a strong influence on their photophysical properties. Herein we report CMA complexes with (1) nearly coplanar, (2) twisted, (3) tilted, and (4) tilt-twisted orientations between donor and acceptor ligands and illustrate the influence of preferred ground-state conformations on both the luminescence quantum yields and excited-state lifetimes. The performance is found to be optimum for structures with partially twisted and/or tilted conformations, resulting in radiative rates exceeding 1 × 106 s-1. Although the metal atoms make only small contributions to HOMOs and LUMOs, they provide sufficient spin-orbit coupling between the low-lying excited states to reduce the excited-state lifetimes down to 500 ns. At the same time, high photoluminescence quantum yields are maintained for a strongly tilted emitter in a host matrix. Proof-of-concept organic light-emitting diodes (OLEDs) based on these new emitter designs were fabricated, with a maximum external quantum efficiency (EQE) of 19.1% with low device roll-off efficiency. Transient electroluminescence studies indicate that molecular design concepts for new CMA emitters can be successfully translated into the OLED device.
RESUMO
The reaction between allenylpyridine (L1) and (Me2S)AuCl resulted in the quantitative formation of the (Indolizy)gold chloride complex 1 (Indolizy = indolizin-2-ylidene). The reaction of 1 with carbazole in the presence of KOtBu affords the corresponding (Indolizy)Au(Cz) complex 2. Both compounds show high air- and temperature stability. The crystal structure of 2 confirmed the linear co-planar geometry. Complex 1 shows an intense low energy absorption of mixed character in the UV-vis spectrum, ascribed to intraligand and (M + Hal)L charge transfer processes, and exhibits bright yellow phosphorescence with an excited state lifetime of 62.8 µs in the crystal and a luminescence quantum yield up to 65%. On the other hand, the carbazolate complex 2 in a polystyrene matrix shows bright red delayed fluorescence at 617 nm with a sub-microsecond excited state lifetime and a quantum yield of 21.6%.
RESUMO
Carbene-metal-amides are soluble and thermally stable materials which have recently emerged as emitters in high-performance organic light-emitting diodes. Here we synthesise carbene-metal-amide photoemitters with CF3-substituted ligands to show sky-blue to deep-blue photoluminescence from charge-transfer excited states. We demonstrate that the emission colour can be adjusted from blue to yellow and observe that the relative energies of charge transfer and locally excited triplet states influence the performance of the deep-blue emission. High thermal stability and insensitivity to aggregation-induced luminescence quenching allow us to fabricate organic light-emitting diodes in both host-free and host-guest architectures. We report blue devices with a peak external quantum efficiency of 17.3% in a host-free emitting layer and 20.9% in a polar host. Our findings inform the molecular design of the next generation of stable blue carbene-metal-amide emitters.
RESUMO
Conformationally flexible "Carbene-Metal-Amide" (CMA) complexes of copper and gold have been developed based on a combination of sterically hindered cyclic (alkyl)(amino)carbene (CAAC) and 6- and 7-ring heterocyclic amide ligands. These complexes show photoemissions across the visible spectrum with PL quantum yields of up to 89% in solution and 83% in host-guest films. Single crystal X-ray diffraction and photoluminescence (PL) studies combined with DFT calculations indicate the important role of ring structure and conformational flexibility of the amide ligands. Time-resolved PL shows efficient delayed emission with sub-microsecond to microsecond excited state lifetimes at room temperature, with radiative rates exceeding 106 s-1. Yellow organic light-emitting diodes (OLEDs) based on a 7-ring gold amide were fabricated by thermal vapor deposition, while the sky-blue to warm-white mechanochromic behavior of the gold phenothiazine-5,5-dioxide complex enabled fabrication of the first CMA-based white light-emitting OLED.
RESUMO
The compounds tricarbonyl(eta(5)-1-iodocyclopentadienyl)manganese(I), [Mn(C(5)H(4)I)(CO)(3)], (I), and tricarbonyl(eta(5)-1-iodocyclopentadienyl)rhenium(I), [Re(C(5)H(4)I)(CO)(3)], (III), are isostructural and isomorphous. The compounds [mu-1,2(eta(5))-acetylenedicyclopentadienyl]bis[tricarbonylmanganese(I)] or bis(cymantrenyl)acetylene, [Mn(2)(C(12)H(8))(CO)(6)], (II), and [mu-1,2(eta(5))-acetylenedicyclopentadienyl]bis[tricarbonylrhenium(I)], [Re(2)(C(12)H(8))(CO)(6)], (IV), are isostructural and isomorphous, and their molecules display inversion symmetry about the mid-point of the ligand C[triple-bond]C bond, with the (CO)(3)M(C(5)H(4)) (M = Mn and Re) moieties adopting a transoid conformation. The molecules in all four compounds form zigzag chains due to the formation of strong attractive I...O [in (I) and (III)] or pi(CO)-pi(CO) [in (I) and (IV)] interactions along the crystallographic b axis. The zigzag chains are bound to each other by weak intermolecular C-H...O hydrogen bonds for (I) and (III), while for (II) and (IV) the chains are bound to each other by a combination of weak C-H...O hydrogen bonds and pi(Csp(2))-pi(Csp(2)) stacking interactions between pairs of molecules. The pi(CO)-pi(CO) contacts in (II) and (IV) between carbonyl groups of neighboring molecules, forming pairwise interactions in a sheared antiparallel dimer motif, are encountered in only 35% of all carbonyl interactions for transition metal-carbonyl compounds.
Assuntos
Compostos Organometálicos/química , Rênio/química , Cristalografia por Raios X , Ligação de HidrogênioRESUMO
The structures of the three title monosubstituted ferrocenes, namely 1-chloroferrocene, [Fe(C(5)H(5))(C(5)H(4)Cl)], (I), 1-bromoferrocene, [Fe(C(5)H(5))(C(5)H(4)Br)], (II), and 1-iodoferrocene, [Fe(C(5)H(5))(C(5)H(4)I)], (III), were determined at 100 K. The chloro- and bromoferrocenes are isomorphous crystals. The new triclinic polymorph [space group P-1, Z = 4, T = 100 K, V = 943.8 (4) A(3)] of iodoferrocene, (III), and the previously reported monoclinic polymorph of (III) [Laus, Wurst & Schottenberger (2005). Z. Kristallogr. New Cryst. Struct. 220, 229-230; space group Pc, Z = 4, T = 100 K, V = 924.9 A(3)] were obtained by crystallization from ethanolic solutions at 253 and 303 K, respectively. All four phases contain two independent molecules in the unit cell. The relative orientations of the cyclopentadienyl (Cp) rings are eclipsed and staggered in the independent molecules of (I) and (II), while (III) demonstrates only an eclipsed conformation. The triclinic and monoclinic polymorphs of (III) contain nonbonded intermolecular I...I contacts, causing different packing modes. In the triclinic form of (III), the molecules are arranged in zigzag tetramers, while in the monoclinic form the molecules are arranged in zigzag chains along the a axis. Crystallographic data for (III), along with the computed lattice energies of the two polymorphs, suggest that the monoclinic form is more stable.