Is there a correlation between pelvic incidence and orientation of the acetabulum? An analysis based on a three-dimensional statistical model of the pelvic ring.

The pelvic ring is a complex anatomical structure building up the connection between the trunk and the legs. Whilst there is a broad discussion in the literature about the dynamic interaction between spine, pelvis and the hip joints, there is still little information about the relation and interaction of the constant pelvic parameters. Based on a three-dimensional (3D) statistical model consisting of 150 uninjured and bony healthy pelves (100 Europeans, 50 Japanese; 81 males, 69 females; average age 74.3 years ± 17.5 years) an evaluation of pelvic incidence (PI) and acetabular orientation in anteversion and inclination was performed and potential correlations of these intraindividual constant parameters were investigated. Pelvic incidence is defined as the angle between the perpendicular to the sacral plate at its midpoint and the line connecting this point to the middle axis of the femoral heads. Acetabular anteversion is defined as the angle between the perpendicular to the best-fit plane on the acetabular rim and the coronal plane measured in strict lateral view. Acetabular inclination is defined as the angle between the perpendicular to the best-fit plane on the acetabular rim and the sagittal plane in strict frontal view. Data were further analysed with regard to different subgroup's age, sex and ethnicity. A positive correlation between PI and acetabular anteversion could be demonstrated. Further, PI and also the acetabular parameters anteversion and inclination were found to be significantly higher in the European individuals than in the Asian. The results of the present study demonstrate a relation between the anatomical configuration of the constant pelvic parameters building up the connection points to the next proximal respectively caudal skeleton section. The findings might lead to more comprehensive treatment strategies in case of trauma or degenerative pathologies of the pelvis in the future.

Asymmetry of the pelvic ring evaluated by CT-based 3D statistical modeling.

The human pelvis is a complex anatomical structure that consists of the innominate bones, sacrum and coccyx to form the pelvic ring. Even though considered to be a symmetric entity, asymmetry of the pelvic ring (APR) might occur to alter its anatomy, function, or biomechanics or to impact assessment and treatment of clinical cases. APR and its assessment is complicated by the intricate anatomy of the pelvic ring. There is only limited information and understanding about APR with no established evaluation methods existing. The objective of the present study was to adopt CT-based 3D statistical modeling and analysis to assess APR within the complex anatomy of the pelvic ring. We were interested to establish a better understanding of APR with knowledge and applications transferred to human anatomy, related research, and development subjects and to clinical settings. A series of 150 routine, clinical, pelvic CT protocols of European and Asian males and females (64 ± 15 (20-90) years old) were post-processed to compute gender- and ancestry-specific 3D statistical models of the pelvic ring. Evaluations comprised principal component analysis (PCA) that included size, shape, and asymmetry patterns and their variations to be assessed. Four different CT-based 3D statistical models of the entire pelvic ring were computed according to the gender and ancestry specific groups. PCA mainly displayed size and shape variations. Examination of additional PCA modes permitted six distinct asymmetry patterns to be identified. They were located at the sacrum, iliac crest, pelvic brim, pubic symphysis, inferior pubic ramus, and near to the acetabulum. Accordingly, the pelvic ring demonstrated not to be entirely symmetric. Assessment of its asymmetry proved to be a challenging task. Using CT-based 3D statistical modeling and PCA, we identified six distinct APRs that were located at different anatomical regions. These regions are more prone to APRs than other sites. Minor asymmetry patterns have to be distinguished from the distinct APRs. Side differences with regard to size, shape, and/or position require to be taken into account. APRs may be due different load mechanisms applied via spine or lower extremity or locally. There is a need for simpler and efficient, yet reliable methods to be routinely transferred to human anatomy, related research, and development subjects and to clinical settings.

Dexamethasone Inhibits the Pro-Angiogenic Potential of Primary Human Myoblasts.

Tissue regeneration depends on the complex processes of angiogenesis, inflammation and wound healing. Regarding muscle tissue, glucocorticoids (GCs) inhibit pro-inflammatory signalling and angiogenesis and lead to muscle atrophy. Our hypothesis is that the synthetic GC dexamethasone (dex) impairs angiogenesis leading to muscle atrophy or inhibited muscle regeneration. Therefore, this study aims to elucidate the effect of dexamethasone on HUVECs under different conditions in mono- and co-culture with myoblasts to evaluate growth behavior and dex impact with regard to muscle atrophy and muscle regeneration. Viability assays, qPCR, immunofluorescence as well as ELISAs were performed on HUVECs, and human primary myoblasts seeded under different culture conditions. Our results show that dex had a higher impact on the tube formation when HUVECs were maintained with VEGF. Gene expression was not influenced by dex and was independent of cells growing in a 2D or 3D matrix. In co-culture CD31 expression was suppressed after incubation with dex and gene expression analysis revealed that dex enhanced expression of myogenic transcription factors, but repressed angiogenic factors. Moreover, dex inhibited the VEGF mediated pro angiogenic effect of myoblasts and inhibited expression of angiogenic inducers in the co-culture model. This is the first study describing a co-culture of human primary myoblast and HUVECs maintained under different conditions. Our results indicate that dex affects angiogenesis via inhibition of VEGF release at least in myoblasts, which could be responsible not only for the development of muscle atrophy after dex administration, but also for inhibition of muscle regeneration after vascular damage.

[Symptoms of Adjustment Disorder after an accidental injury: risk and protective factors]. / Symptome einer Anpassungsstörung nach einer Unfallverletzung: Risiko- und Schutzfaktoren.

Symptoms of Adjustment Disorder after an accidental injury: risk and protective factors Objectives: The identification of protective and risk factors for symptoms of adjustment disorder (AD) after an accident injury. Methods: In this prospective long-term study, data from 73 patients with ankle and lower leg fractures were analyzed. Symptoms of AD were assessed at enrollment (T0), 1 month (T1) and 12 months (T2) after injury. In addition, questionnaires regarding adverse childhood experiences, coping strategies and the number of stressors during the last year were obtained. The Structured Clinical Interview for DSM-IV (SCID) was conducted at T1 and T2. Results: 4.1 % of patients met the criteria for AD at T1 and 2.7 % at T2. Acceptance coping predicted a lower level of AD symptoms 1 year after the injury (ß = -.42, p <.001). Conclusions: It could be confirmed that the selection of coping strategies predicts the level of AD symptoms 12 months after the injury. The results show that acceptance is a protective factor for AD and contribute to a better understanding of a little-researched diagnosis.

Detecting the Effects of the Glucocorticoid Dexamethasone on Primary Human Skeletal Muscle Cells-Differences to the Murine Cell Line.

Skeletal muscle atrophy is characterized by a decrease in muscle fiber size as a result of a decreased protein synthesis, which leads to degradation of contractile muscle fibers. It can occur after denervation and immobilization, and glucocorticoids (GCs) may also increase protein breakdown contributing to the loss of muscle mass and myofibrillar proteins. GCs are already used in vitro to induce atrophic conditions, but until now no studies with primary human skeletal muscle existed. Therefore, this study deals with the effects of the GC dexamethasone (dex) on primary human myoblasts and myotubes. After incubation with 1, 10, and 100 µM dex for 48 and 72 h, gene and protein expression analyses were performed by qPCR and Western blot. Foxo, MuRF-1, and MAFbx were significantly upregulated by dex, and there was increased gene expression of myogenic markers. However, prolonged incubation periods demonstrated no Myosin protein degradation, but an increase of MuRF-1 expression. In conclusion, applying dex did not only differently affect primary human myoblasts and myotubes, as differences were also observed when compared to murine cells. Based on our findings, studies using cell lines or animal cells should be interpreted with caution as signaling transduction and functional behavior might differ in diverse species.

3D statistical model of the pelvic ring - a CT-based statistical evaluation of anatomical variation.

The pelvic ring is a highly complex construct with a central role for human stability and mobility. The observable interindividual differences in skeletal anatomy are caused by anatomical variation in the innominate bones as well as the sacrum, further to differences in the spatial arrangement of these bones to each other. The aim of this study was to generate a 3D statistical model of the entire pelvic ring in order to analyse the observed interindividual differences and anatomical variation. A series of 50 anonymized pelvic CT scans of uninjured Japanese adults [30 males, 20 females, average age of 74.9 years, standard deviation (SD) 16.9 years] were processed and analysed, resulting in a 3D statistical overall mean model and separate male and female mean models. Principal component analysis (PCA) of the overall statistical model predominantly showed size variation (20.39%) followed by shape variation (14.13%), and a variation of the spatial arrangement of the sacrum to the innominate bones in different anatomical peculiarities (11.39 and 8.85%). In addition, selected internal and external pelvic parameters were manually measured with the objective of further evaluating and quantifying the observed interindividual as well as the known sex-specific differences. A separate statistical model of the grey value distribution based on the given Hounsfield unit (HU) values was calculated for assessing bone mass distribution, thus an indication of bone quality utilizing grey values as a quantitative description of radiodensity was obtained. A consistent pattern of grey value distribution was shown, with the highest grey values observed between the sacro-iliac joint and the acetabulum along the pelvic brim. Low values were present in the sacral ala, in the area of the iliac fossa as well as in the pubic rami next to the symphysis. The present model allows a differentiated analysis of the observed interindividual variation of the pelvic ring and an evaluation of the grey value distribution therein. Besides providing a better understanding of anatomical variation, this model could be also used as a helpful tool for educational purposes, preoperative planning and implant design.

Calf Blood Compound (CFC) and Homeopathic Drug Induce Differentiation of Primary Human Skeletal Muscle Cells.

The use of injections to treat structural muscle injuries is controversially discussed. In our controlled in vitro study, we investigated the biological impact of Actovegin and Traumeel alone and in combination on primary human skeletal muscle cells. Cells were characterized by immunofluorescence staining for myogenic factor 5 (Myf5) and MyoD, and cultured with or without Actovegin and / or Traumeel. The effects of these agents were assayed by cell viability and gene expression of the specific markers MyoD, Myf5, neural adhesion molecule (NCAM), and CD31. Myotube formation was determined by myosin staining. Neither Actovegin nor Traumeel showed toxic effects or influenced cell viability significantly. High volumes of Actovegin down-regulated gene expression of NCAM after 3 days but had no effect on MyoD, Myf5, and CD31 gene expression. High volumes of Traumeel inhibited MyoD gene expression after 3 days, whereas after 7 days MyoD expression was significantly up-regulated. The combination of both agents did not significantly influence cell viability or gene expression. This is the first study demonstrating that Actovegin and Traumeel potentially modulate human skeletal muscle cells. The relevance of these in vitro findings has to be highlighted in further in vivo studies.

Complex radial head and neck fractures treated with modern locking plate fixation.

BACKGROUND: Internal fixation of complex radial head and neck (CRHN) fractures is difficult, and postoperative complications are common. This study evaluated elbow function and patient clinical status after internal fixation of CRHN fractures with modern locking plates. METHODS: We included 40 patients with 41 fractures (1 bilateral lesion). In 25 patients (61%), a concomitant injury was found. Patients were an average age of 46 years (range, 22-70 years). The mean follow-up time was 36 months (range, 2-70 months). Postoperative assessments included evaluation of range of motion, functional scores, and radiologic findings. We assessed fracture healing, surgical complications, revision surgery, and the need for metal removal. RESULTS: Of the 34 fractures available for follow-up, 33 (97%) healed well. The mean extension deficit was 6° (range, 0°-30°). The average elbow flexion was 134° (range, 90°-160°), pronation was 70° (range, 30°-90°), and supination was 64° (range, 20°-90°). The Mayo Elbow Performance Score showed a mean of 90 points (range, 65-100 points). We observed no "poor" results. The mean Disability of Arm, Shoulder and Hand score was 16.5 (range, 2.5-58.3; n = 29). All patients continued activity without daily analgesics. There were 12 (34%) complications. In 11 (32%) patients, the plate was removed. CONCLUSIONS: CRHN fractures fixed with modern locking plates and treated as an osseoligamentous lesion exhibited promising midterm results. The new fixation devices represent an improvement in the treatment of this difficult and common fracture while reducing the need for joint replacement or radial head resection. Diagnosis and treatment of concomitant injuries should be emphasized.

Space available for trans-sacral implants to treat fractures of the pelvis assessed by virtual implant positioning.

INTRODUCTION: The use of trans-sacral implants to treat fractures of the sacrum is limited by the variable pelvic anatomy. We were interested in how many trans-sacral implants can be placed per pelvis? If a trans-sacral implant cannot be placed in S1, where is the cortex perforated, and is the use of sacroiliac screws safe in these pelves? MATERIALS AND METHODS: 3D pelvic models were created from CT scans of 156 individuals without fractures (92 European and 64 Japanese, 79 male and 77 female, mean age 66.7 ± 13.7 years). Trans-sacral implants with a diameter of 7.3 mm were positioned virtually with and without a surrounding safe zone of 12 mm diameter. RESULTS: Fifty-one percent of pelves accommodated trans-sacral implants in S1 with a safe zone. Twenty-two percent did not offer enough space in S1 for an implant even when ignoring the safe zone. Every pelvis had sufficient space for a trans-sacral implant in S2, in 78% including a safe zone as well. In S1, implant perforation was observed in the sacral ala and iliac fossa in 69%, isolated iliac fossa perforation in 23% and perforation of the sacral ala in 8%. Bilateral sacroiliac screw placement was always possible in S1. CONCLUSIONS: The use of trans-sacral implants in S1 requires meticulous preoperative planning to avoid injury of neurovascular structures. S2 more consistently offers space for trans-sacral implants.

[Fragility fractures of the pelvis]. / Fragilitätsfrakturen des Beckens.

Fragility fractures of the pelvis are increasing in frequency. In most cases patients suffer a minor injury, have intense pain in the pelvic region and impaired mobility. The new fragility fractures of the pelvis (FFP) classification distinguishes between four types with increasing instability. The FFP types I and II are treated conservatively. For FFP types III and IV and type II with unsuccessful conservative treatment, minimally invasive stabilizing techniques are recommended. Both the posterior and anterior pelvic ring must be stabilized. Alternative techniques for dorsal stabilization are iliosacral screw and transsacral bar osteosynthesis, transiliac internal fixator and lumbopelvic fixation. External fixation, retrograde transpubic screw fixation, anterior internal fixation and plate and screw osteosynthesis are alternatives for the anterior pelvic ring. Treatment of fragility fractures of the pelvis should be carried out as part of an orthogeriatric co-management.

[Psychological factors following ankle fractures : A review article]. / Psychische Faktoren bei Sprunggelenkfrakturen : Ein Übersichtsartikel.

Ankle fractures have many short and long-term consequences for patients. For this reason, psychosocial factors also play a role in the success of the treatment in addition to the surgical treatment. The aim of this article is to give an overview of the psychological aspects in the context of fractures as well as explanatory models for the different ways of coping. In addition, an overview of the empirical data with respect to psychological influences and outcome factors in lower extremity fractures, specifically ankle fractures, is given. The current research indicates that psychosocial factors have a decisive influence on the physical and psychological outcome.

Fragility fractures of the sacrum occur in elderly patients with severe loss of sacral bone mass.

INTRODUCTION: Patients suffering from osteoporosis-associated fragility fractures of the sacrum (FFS; also termed sacral insufficiency fractures) are increasingly observed. They have typical fracture patterns with fracture lines located in the sacral ala. When treating these patients operatively, iliosacral screw loosening is not uncommon. We aimed to study the sacral bone mass in patients presenting with a FFS using 3D statistical models. MATERIALS AND METHODS: 3D models of averaged Hounsfield units (HU) were generated based on CT scans from 13 patients with a unilateral FFS (mean age 79.6 years; 11 females, 2 males). The control group without fractures consisted of 28 males and 32 females (mean age of 68.3 years). A virtual bone probe along the trans-sacral corridors S1 and S2 was taken. RESULTS: The bone mass distribution in the fractured sacra was similar to the control group, however, with overall lower HU. Large zones of negative HU were located in the sacral ala. In the fractured sacra, the HU in the sacral ala was significantly lower on the non-injured side when comparing to the fractured side (p < 0.001) as well as compared to the non-fractured group (p < 0.001). Low bone mass was observed in sacral body S1 (40 HU) and S2 (20 HU). CONCLUSIONS: The extensive area of negative HU may explain the fracture location in the sacral ala. The low HU in the sacral bodies advocates the use of trans-sacral implants or augmented iliosacral screws to enhance the strength of fracture fixation. The increased HU in the fractured ala could be explained by fracture-asssociated hemorrhage and can be used as a diagnostic tool.

Is the novel olecranon tension plate a valid alternative to tension band wiring of olecranon fractures? A biomechanical study on cadaver bones.

INTRODUCTION: Tension band wiring (TBW) used for olecranon fractures is afflicted with a high rate of complications. The aim of this study was to compare the stability of the TBW versus an alternative, novel low-profile olecranon tension plate (OTP) with angular stable screws in a simulated complex fracture model. MATERIALS AND METHODS: Nine fresh-frozen pairs of cadaver proximal ulnae with an oblique osteotomy and an additional wedge fragment simulating an unstable fracture were tested. The TBW and OTP were implanted pairwise. The elbow motion was simulated in a single-muscle model and ranged from full extension to 90° of flexion. The pulling force of the triceps tendon ranged from 50 to 200 N. The displacement of the fracture fragments was measured with a video motion analysis system over 304 cycles. Data were assessed statistically using the Wilcoxon signed-rank test. RESULTS: The cyclic loading tests showed mean loosening of the fracture fragments at the articular surface of 0.56 mm using TBW (SD 0.65) and 0.15 mm for OTP (SD 0.39). There was no statistical significance in loosening between the two constructs (p = 0.31). No plate breakage or screw loosening occurred. CONCLUSIONS: The low-profile OTP, using the principles of pre-tensioning, lag, cortical, and angular stable screws together, demonstrated similar stability after olecranon fracture fixation when compared with the TBW technique and a lag screw in the olecranon fracture model with a third wedge fragment.

Clinical pathways for fragility fractures of the pelvic ring: personal experience and review of the literature.

Fragility fractures of the pelvic ring (FFP) are increasing in frequency and require challenging treatment. A new comprehensive classification considers both fracture morphology and degree of instability. The classification system also provides recommendations for type and invasiveness of treatment. In this article, a literature review of treatment alternatives is presented and compared with our own experiences. Whereas FFP Type I lesions can be treated conservatively, FFP Types III and IV require surgical treatment. For FFP Type II lessions, percutaneous fixation techniques should be considered after a trial of conservative treatment. FFP Type III lesions need open reduction and internal fixation, whereas FFP Type IV lesions require bilateral fixation. The respective advantages and limitations of dorsal (sacroiliac screw fixation, sacroplasty, bridging plate fixation, transsacral positioning bar placement, angular stable plate) and anterior (external fixation, angular stable plate fixation, retrograde transpubic screw fixation) pelvic fixations are described.

A new angle stable nailing concept for the treatment of distal tibia fractures.

PURPOSE: Surgical treatment of distal tibial fractures demands a stable fracture fixation while minimizing the irritation to the soft tissues by approach and implant. Biomechanical studies have demonstrated superior performance for angular-stable locked nails over standard locked nails in distal tibial fractures. The experimental Retrograde Tibial Nail (RTN) is a minimally invasive local intramedullary osteosynthesis, which has been under design by our group. We conducted a biomechanical comparison in composite tibiae of the Retrograde Tibial Nail against the Expert Tibial Nail (Synthes®). Our hypothesis was that the RTN would provide equivalent biomechanical stability with respect to extra-axial compression, torsion and load to failure testing, in an extra-articular distal tibia fracture model. METHODS: Biomechanical composite bone testing was conducted in 14 biomechanical composite tibiae in an AO 43 A3 fracture model. In both groups, triple angle stable interlocking was performed in the distal fragment. RESULTS: Results show a statistically non-significant higher stability of the ETN during the axial loading tests. Torsional stability testing resulted in a statistically superior performance for the RTN (p = 0.018). Destructive extra-axial compression resulted in failure of six ETN constructs, while all RTN specimens survived the maximal load. CONCLUSIONS: The experimental Retrograde Tibial Nail provides the key features for the treatment of distal tibial fractures. It combines a minimally invasive local intramedullary osteosynthesis with the ability to securely fix the fracture by multiple angle stable locking options.

Tension band wiring in olecranon fractures: the myth of technical simplicity and osteosynthetical perfection.

PURPOSE: The tension band wiring (TBW) technique is a common treatment for the fixation of olecranon fractures with up to three fragments. The literature and surgeons describe TBW as an uncomplicated, always available and convenient operation producing excellent results. The purpose of this study was to determine whether TBW is more ambitious than believed or the procedure provides an increased level of tolerance concerning the surgical technique. METHODS: This study reviewed 239 TBW cases in patients with olecranon fractures or osteotomies. We reviewed a total of 2,252 X-rays for ten operative imperfections: (1) nonparallel K-wires, (2) long K-wires, (3) K-wires extending radially outwards, (4) insufficient fixation of the proximal ends of the K-wires, (5) intramedullary K-wires, (6) perforation of the joint surface, (7) single wire knot, (8) jutting wire knot(s), (9) loose figure-of-eight configuration, and (10) incorrect repositioning. RESULTS: On average, there were 4.24 imperfections per intervention in the cases reviewed. A total of 1,014 of 2,390 possible imperfections were detected. The most frequent imperfections were insufficient fixation of the proximal ends of the K-wires (91% of all cases), the use of a single wire knot (78%) and nonparallel K-wires (72%). Mayo IIa (n = 188) was the most common fracture type. CONCLUSIONS: Our results and the number of complications described by the literature together support the conclusion that TBW is not as easy as surgeons and the literature suggest. Although bone healing and the functional results of TBW are excellent in most cases, the challenges associated with this operation are underestimated. LEVEL OF EVIDENCE: IV, treatment study.

Locking-plate osteosynthesis versus intramedullary nailing for fixation of olecranon fractures: a biomechanical study.

PURPOSE: Intramedullary nailing and locked plating for fixation of olecranon fractures has recently gained popularity. However, these two new technologies have not been compared for their biomechanical efficacy. The aim of this study was to evaluate the biomechanical stability of two newly designed fracture fixation devices for treating olecranon fractures during dynamic continuous loading: the ION intramedullary locking nail and the LCP precontoured locking compression plate. METHODS: Simulated oblique olecranon fractures were created in eight pairs of fresh-frozen cadaver ulnae and stabilised using either the LCP or ION. Specimens were then subjected to continuous dynamic loading (from 25 to 200 N), with a continuous angle alteration between 0° and 90° of flexion, to perform a matched-pairs comparison. Significant differences in the distance between markers surrounding the fracture gap was determined using the Wilcoxon test after four and 300 loading cycles. RESULTS: The ION resulted in significantly less displacement in the fracture gap at 0° extension (P = 0.036), 45° flexion (P = 0.035) and 90° flexion (P = 0.017) after 300 cycles of continuous loading. The measured displacements were small and were probably not of clinical significance. No mechanical failure or hardware migration was seen with either fixation technique. CONCLUSION: This study shows significantly less micromotion for the ION than for the LCP in treating oblique olecranon fractures after 300 cycles of dynamic loading. Both implant types could be appropriate surgical techniques for fixation of selected olecranon fractures and osteotomies.

Do we need to fix the anterior fracture component in insufficiency fractures of the pelvis? A biomechanical comparison on an FFP type IIIc fracture in an osteoporotic pelvic bone model.

There is a growing understanding of the specific characteristics of insufficiency fractures of the pelvis and of general requirements for the treatment of affected patients with focus on early mobilization and effective pain reduction as the main goals of therapy. While there is consensus on the significance of achieving stability of the dorsal pelvic ring structures there is still an open discussion about the potential benefits of additional stabilization of an anterior fracture component. Within a biomechanical test setup, two established methods of dorsal fracture fixation were tested under axial loading (25-1200 N; 1000 test cycles) on an explicit osteoporotic bone model (n = 32) with a standardized FFP type IIIc fracture with and without additional fixation of the anterior fracture component. Dorsal fixation was performed with and long and a short 7.3 mm cannulated screw in S1 in one group (n = 16), and a trans sacral bar with an additional short 7.3 mm cannulated screw in S1 in the other group (n = 16). Half of the samples received a 7.3 mm cannulated retrograde transpubic screw for anterior fixation. The fixation with the trans sacral bar and the additional anterior screw fixation showed the highest rate of stability (p = 0.0014), followed by the double SI-screw fixation with stabilization of the anterior fracture (p = 0.0002). During testing, we observed the occurrence of new sacral fractures contralateral to the initial fracture in 22/32 samples. The results let us assume that stabilization of an additional anterior fracture component relevantly improves the stability of the entire ring construct and might prevent failure of the dorsal stabilization or further fracture progression.

The effect of losartan on the development of post-traumatic joint stiffness in a rat model.

Post-traumatic joint stiffness (PTJS) is accompanied by a multidimensional disturbance of joint architecture. Pharmacological approaches represent promising alternatives as the traumatic nature of current therapeutic standards may lead to PTJS' progression. Losartan is an auspicious candidate, as it has demonstrated an antifibrotic effect in other organs. Forty-eight Sprague Dawley rats were randomized into equally sized losartan or control groups. After a standardized knee trauma, the joint was immobilized for either 2 weeks (n = 16), 4 weeks (n = 16) or 4 weeks with re-mobilization for an additional 4 weeks (n = 16). Pharmacotherapy with losartan or placebo (30 mg/kg/day) was initiated on the day of trauma and continued for the entire course. Joint contracture was measured alongside histological and molecular biological assessments. There were no significant biomechanical changes in joint contracture over time, comparing short-term (2 weeks) with long-term losartan therapy (4 weeks). However, comparing the formation of PTJS with that of the control, there was a trend toward improvement of joint mobility of 10.5° (p 0.09) under the influence of losartan. During the re-mobilization phase, no significant effect of losartan on range of motion (ROM) was demonstrated. At a cellular level, losartan significantly reduced myofibroblast counts by up to 72 % (4 weeks, p ≤ 0.001) without effecting the capsular configuration. Differences in expression levels of profibrotic factors (TGF-ß, CTGF, Il-6) were most pronounced at week 4. The antifibrotic properties of losartan are not prominent enough to completely prevent the development of PTJS after severe joint injury.

The anatomy of the proximal radius: implications on fracture implant design.

BACKGROUND: The proximal radius features a complex anatomy. Several studies have been published on the anatomy using different technical approaches; however, most of these studies were conducted with a special focus on parameters relevant to radial prosthetic design. The purpose of our study was to explore the complex geometry of the proximal radius with regard to fracture implant design. METHODS: Our computed tomography-based measurements of 78 multiplanar reformatted radii allow for exact assessment of its geometry and offer a scientific rationale towards the design of fracture implants. We conducted measurements on the radial head, the radial neck, the radial tuberosity, the radial head-to-neck angle, and the safe zone. RESULTS: A wide range of normal anatomy has been demonstrated for all parameters. Sex differences are statistically significant in all registered parameters, except the radial head-to-neck angle. Although measurements of maximum vs minimum radial head, neck, and tuberosity diameters show close correlation, diameter-to-length correlations, such as radial head diameter vs radial head height and radial neck diameter vs radial neck length, are low. CONCLUSIONS: Besides the wide range in size, intraindividual parameter variations have to be taken into account in the design of anatomically precontoured plates. The results of this study indicate that these plates will still need to offer the ability of "bend to match."