RESUMO
The characteristic red color of many natural tourmalines is due to the presence of Mn(III) cations substituting for aluminum and lithium. These sites originate as Mn(II) and are oxidized by natural γ-irradiation over geologic time as they sit in the Earth's crust. Presented here is a thorough analysis of the spin-allowed and spin-forbidden transitions which give rise to the color of these gemstones. Ligand field analysis, supplemented by time-dependent density functional theory, was used to correct the historical assignments of the symmetry-allowed transitions in the polarized UV-visible absorption spectrum. Heat-induced reduction of the oxidized manganese sites provided a probe of the relationship between the spin-allowed and spin-forbidden bands. Notably, the intensity of the spin-forbidden transition was highly dependent on the neighboring ions in the Y-site. Simulations and modeling showed that increased intensity was observed only when two Mn(III) ions occupied adjacent substitutions in the Y-site via a proposed exchange-coupling mechanism.
RESUMO
The incorporation of electrically tunable materials into photonic structures such as waveguides and metasurfaces enables dynamic, electrical control of light propagation at the nanoscale. Few-layer black phosphorus is a promising material for these applications due to its in-plane anisotropic, quantum well band structure, with a direct band gap that can be tuned from 0.3 to 2 eV with a number of layers and subbands that manifest as additional optical transitions across a wide range of energies. In this Letter, we report an experimental investigation of three different, anisotropic electro-optic mechanisms that allow electrical control of the complex refractive index in few-layer black phosphorus from the mid-infrared to the visible: Pauli-blocking of intersubband optical transitions (the Burstein-Moss effect); the quantum-confined Stark effect; and the modification of quantum well selection rules by a symmetry-breaking, applied electric field. These effects generate near-unity tuning of the BP oscillator strength for some material thicknesses and photon energies, along a single in-plane crystal axis, transforming absorption from highly anisotropic to nearly isotropic. Lastly, the anisotropy of these electro-optical phenomena results in dynamic control of linear dichroism and birefringence, a promising concept for active control of the complex polarization state of light, or propagation direction of surface waves.
RESUMO
We report measurements of the infrared optical response of thin black phosphorus under field-effect modulation. We interpret the observed spectral changes as a combination of an ambipolar Burstein-Moss (BM) shift of the absorption edge due to band-filling under gate control, and a quantum confined Franz-Keldysh (QCFK) effect, phenomena that have been proposed theoretically to occur for black phosphorus under an applied electric field. Distinct optical responses are observed depending on the flake thickness and starting carrier concentration. Transmission extinction modulation amplitudes of more than two percent are observed, suggesting the potential for use of black phosphorus as an active material in mid-infrared optoelectronic modulator applications.
RESUMO
The Moon is thought to be depleted relative to the Earth in volatile elements such as H, Cl and the alkalis. Nevertheless, evidence for lunar explosive volcanism has been used to infer that some lunar magmas exsolved a CO-rich and CO(2)-rich vapour phase before or during eruption. Although there is also evidence for other volatile species on glass spherules, until recently there had been no unambiguous reports of indigenous H in lunar rocks. Here we report quantitative ion microprobe measurements of late-stage apatite from lunar basalt 14053 that document concentrations of H, Cl and S that are indistinguishable from apatites in common terrestrial igneous rocks. These volatile contents could reflect post-magmatic metamorphic volatile addition or growth from a late-stage, interstitial, sulphide-saturated melt that contained approximately 1,600 parts per million H(2)O and approximately 3,500 parts per million Cl. Both metamorphic and igneous models of apatite formation suggest a volatile inventory for at least some lunar materials that is similar to comparable terrestrial materials. One possible implication is that portions of the lunar mantle or crust are more volatile-rich than previously thought.
RESUMO
We present recent developments in time-resolved Raman spectroscopy instrumentation and measurement techniques for in situ planetary surface exploration, leading to improved performance and identification of minerals and organics. The time-resolved Raman spectrometer uses a 532 nm pulsed microchip laser source synchronized with a single photon avalanche diode array to achieve sub-nanosecond time resolution. This instrument can detect Raman spectral signatures from a wide variety of minerals and organics relevant to planetary science while eliminating pervasive background interference caused by fluorescence. We present an overview of the instrument design and operation and demonstrate high signal-to-noise ratio Raman spectra for several relevant samples of sulfates, clays, and polycyclic aromatic hydrocarbons. Finally, we present an instrument design suitable for operation on a rover or lander and discuss future directions that promise great advancement in capability.
Assuntos
Astronomia , Eletrônica/instrumentação , Miniaturização/instrumentação , Fótons , Planetas , Análise Espectral Raman/instrumentação , Silicatos de Alumínio/análise , Argila , Sedimentos Geológicos , Minerais/análise , Compostos Orgânicos/análise , Compostos Orgânicos/química , Sulfatos/análise , Fatores de TempoRESUMO
Monolayer ternary tellurides based on alloying different transition metal dichalcogenides (TMDs) can result in new two-dimensional (2D) materials ranging from semiconductors to metals and superconductors with tunable optical and electrical properties. Semiconducting WTe2 x S2(1- x ) monolayer possesses two inequivalent valleys in the Brillouin zone, each valley coupling selectively with circularly polarized light (CPL). The degree of valley polarization (DVP) under the excitation of CPL represents the purity of valley polarized photoluminescence (PL), a critical parameter for opto-valleytronic applications. Here, new strategies to efficiently tailor the valley-polarized PL from semiconducting monolayer WTe2 x S2(1- x ) at room temperature (RT) through alloying and back-gating are presented. The DVP at RT is found to increase drastically from < 5% in WS2 to 40% in WTe0.12 S1.88 by Te-alloying to enhance the spin-orbit coupling. Further enhancement and control of the DVP from 40% up to 75% is demonstrated by electrostatically doping the monolayer WTe0.12 S1.88 via metallic 1T'-WTe2 electrodes, where the use of 1T'-WTe2 substantially lowers the Schottky barrier height (SBH) and weakens the Fermi-level pinning of the electrical contacts. The demonstration of drastically enhanced DVP and electrical tunability in the valley-polarized emission from 1T'-WTe2 /WTe0.12 S1.88 heterostructures paves new pathways towards harnessing valley excitons in ultrathin valleytronic devices for RT applications.
RESUMO
Walter et al. issue a number of critical comments on our report about the discovery of davemaoite to the end that they believe to show that our results do not provide compelling evidence for the presence of davemaoite in the type specimen and that the hosting diamond had formed in the lithosphere. Their claim is based on a misinterpretation of the diffraction data contained in the paper, an insufficient analysis of the compositional data that disregards the three-dimensional distribution of inclusions, and the arbitrary assumption that Earth's mantle shows no lateral variations in temperature, inconsistent with state-of-the-art assessments of mantle temperature variations and with their own published results.
RESUMO
Monolayer transition metal dichalcogenides (TMDs) have intrinsic valley degrees of freedom, making them appealing for exploiting valleytronic applications in information storage and processing. WS2 monolayer possesses two inequivalent valleys in the Brillouin zone, each valley coupling selectively with a circular polarization of light. The degree of valley polarization (DVP) under the excitation of circularly polarized light (CPL) is a parameter that determines the purity of valley polarized photoluminescence (PL) of monolayer WS2 . Here efficient tailoring of valley-polarized PL from monolayer WS2 at room temperature (RT) through surface plasmon-exciton interactions with plasmonic Archimedes spiral (PAS) nanostructures is reported. The DVP of WS2 at RT can be enhanced from <5% to 40% and 50% by using 2 turns (2T) and 4 turns (4T) of PAS, respectively. Further enhancement and control of excitonic valley polarization is demonstrated by electrostatically doping monolayer WS2 . For CPL on WS2 -2TPAS heterostructures, the 40% valley polarization is enhanced to 70% by modulating the carrier doping via a backgate, which may be attributed to the screening of momentum-dependent long-range electron-hole exchange interactions. The manifestation of electrically tunable valley-polarized emission from WS2 -PAS heterostructures presents a new strategy toward harnessing valley excitons for application in ultrathin valleytronic devices.
RESUMO
We incorporate newly developed solid-state detector technology into time-resolved laser Raman spectroscopy, demonstrating the ability to distinguish spectra from Raman and fluorescence processes. As a proof of concept, we show fluorescence rejection on highly fluorescent mineral samples willemite and spodumene using a 128×128 single-photon avalanche diode (SPAD) array with a measured photon detection efficiency of 5%. The sensitivity achieved in this new instrument architecture is comparable to the sensitivity of a technically more complicated system using a traditional photocathode-based imager. By increasing the SPAD active area and improving coupling efficiency, we expect further improvements in sensitivity by over an order of magnitude. We discuss the relevance of these results to in situ planetary instruments, where size, weight, power, and radiation hardness are of prime concern. The potential large-scale manufacturability of silicon SPAD arrays makes them prime candidates for future portable and in situ Raman instruments spanning numerous applications where fluorescence interference is problematic.
RESUMO
Under reducing conditions, rutile TiO2 develops O vacancies (VO) coupled to Ti3+ centers. It is favorable for H atoms to enter this system, either forming OH groups or occupying vacancy sites (denoted HO) that bond to two Ti atoms next to the vacancy. OH defects are well documented by the presence of infrared modes at â¼3300 cm-1, while HO is relatively underinvestigated. We report the energies, geometries, and vibrational frequencies of hydrogen defects in rutile predicted from quantum mechanics calculations, focusing on the coexistence of OH and HO. We find that HO is more stable than OH by 1.42 eV, leading to an infrared mode at â¼1200 cm-1. Introducing a second H forms an OH bond with an infrared mode at â¼3300 cm-1. These results suggest that assessments of hydrogen storage in mantle phases of rutile and similar minerals based on OH bands may significantly underestimate H concentrations.
RESUMO
Calcium silicate perovskite, CaSiO3, is arguably the most geochemically important phase in the lower mantle, because it concentrates elements that are incompatible in the upper mantle, including the heat-generating elements thorium and uranium, which have half-lives longer than the geologic history of Earth. We report CaSiO3-perovskite as an approved mineral (IMA2020-012a) with the name davemaoite. The natural specimen of davemaoite proves the existence of compositional heterogeneity within the lower mantle. Our observations indicate that davemaoite also hosts potassium in addition to uranium and thorium in its structure. Hence, the regional and global abundances of davemaoite influence the heat budget of the deep mantle, where the mineral is thermodynamically stable.
RESUMO
Black phosphorus (BP) offers considerable promise for infrared and visible photonics. Efficient tuning of the bandgap and higher subbands in BP by modulation of the Fermi level or application of vertical electric fields has been previously demonstrated, allowing electrical control of its above-bandgap optical properties. Here, we report modulation of the optical conductivity below the bandgap (5 to 15 µm) by tuning the charge density in a two-dimensional electron gas induced in BP, thereby modifying its free carrier-dominated intraband response. With a moderate doping density of 7 × 1012 cm-2, we were able to observe a polarization-dependent epsilon-near-zero behavior in the dielectric permittivity of BP. The intraband polarization sensitivity is intimately linked to the difference in effective fermionic masses along the two crystallographic directions, as confirmed by our measurements. Our results suggest the potential of multilayer BP to allow new optical functions for emerging photonics applications.
RESUMO
Planetary mineralogy can be revealed through a variety of remote sensing and in situ investigations that precede any plans for eventual sample return. We briefly review those techniques and focus on the capabilities for on-surface in situ examination of Mars, Venus, the Moon, asteroids, and other bodies. Over the past decade, Raman spectroscopy has continued to develop as a prime candidate for the next generation of in situ planetary instruments, as it provides definitive structural and compositional information of minerals in their natural geological context. Traditional continuous-wave Raman spectroscopy using a green laser suffers from fluorescence interference, which can be large (sometimes saturating the detector), particularly in altered minerals, which are of the greatest geophysical interest. Taking advantage of the fact that fluorescence occurs at a later time than the instantaneous Raman signal, we have developed a time-resolved Raman spectrometer that uses a streak camera and pulsed miniature microchip laser to provide picosecond time resolution. Our ability to observe the complete time evolution of Raman and fluorescence spectra in minerals makes this technique ideal for exploration of diverse planetary environments, some of which are expected to contain strong, if not overwhelming, fluorescence signatures. We discuss performance capability and present time-resolved pulsed Raman spectra collected from several highly fluorescent and Mars-relevant minerals. In particular, we have found that conventional Raman spectra from fine grained clays, sulfates, and phosphates exhibited large fluorescent signatures, but high quality spectra could be obtained using our time-resolved approach.
RESUMO
Monolayer transition-metal dichalcogenides (TMDCs) in the 2H-phase are promising semiconductors for opto-valleytronic and opto-spintronic applications because of their strong spin-valley coupling. Here, we report detailed studies of opto-valleytronic properties of heterogeneous domains in CVD-grown monolayer WS2 single crystals. By illuminating WS2 with off-resonance circularly polarized light and measuring the resulting spatially resolved circularly polarized emission (Pcirc), we find significantly large circular polarization (Pcirc up to 60% and 45% for α- and ß-domains, respectively) already at 300 K, which increases to nearly 90% in the α-domains at 80 K. Studies of spatially resolved photoluminescence (PL) spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, Kelvin-probe force microscopy, and conductive atomic force microscopy reveal direct correlation among the PL intensity, defect densities, and chemical potential, with the α-domains showing lower defect densities and a smaller work function by 0.13 eV than the ß-domains. This work function difference indicates the occurrence of type-two band alignments between the α- and ß-domains. We adapt a classical model to explain how electronically active defects may serve as nonradiative recombination centers and find good agreement between experiments and the model. Scanning tunneling microscopic/spectroscopic (STM/STS) studies provide further evidence for tungsten vacancies (WVs) being the primary defects responsible for the suppressed PL and circular polarization in WS2. These results therefore suggest a pathway to control the opto-valleytronic properties of TMDCs by means of defect engineering.
RESUMO
Adsorbed molecules can significantly affect the properties of atomically thin materials. Physisorbed water plays a significant role in altering the optoelectronic properties of single-layer MoS2 , one such 2D film. Here the distinct quenching effect of adsorbed water on the photoluminescence of single-layer MoS2 is demonstrated through scanning-probe and optical microscopy.
RESUMO
An optical instrument we refer to as the "biaxial orientation device" has been developed for finding the optical plane, acute bisectrix, and obtuse bisectrix in biaxial crystals by means of optically aligning conoscopically formed melatopes and measuring the angular coordinates of the melatopes, where the angular values allow for determination of the optical plane containing the optical axes using a vector algebra approach. After determination of the optical plane, the instrument allows for the sample to be aligned in the acute bisectrix or obtuse bisectrix orientations and to be transferred to a simple mechanical component for subsequent grinding and polishing, while preserving the orientation of the polished faces relative to the optical plane, acute bisectrix, and obtuse bisectrix during the grinding and polishing process. Biaxial crystalline material samples prepared in the manner are suitable for accurate spectroscopic absorption measurements in the acute bisectrix and obtuse bisectrix directions as well as perpendicular to the optical plane.
RESUMO
Meteorites exposed to high pressures and temperatures during impact-induced shock often contain minerals whose occurrence and stability normally confine them to the deeper portions of Earth's mantle. One exception has been MgSiO3 in the perovskite structure, which is the most abundant solid phase in Earth. Here we report the discovery of this important phase as a mineral in the Tenham L6 chondrite and approved by the International Mineralogical Association (specimen IMA 2014-017). MgSiO3-perovskite is now called bridgmanite. The associated phase assemblage constrains peak shock conditions to ~ 24 gigapascals and 2300 kelvin. The discovery concludes a half century of efforts to find, identify, and characterize a natural specimen of this important mineral.