RESUMO
To develop bioconjugated materials, it is necessary to understand how the various elements present in a conjugate interact with one another. To gain insights into nanoparticle-capping agent-protein interactions, gold nanoparticles (AuNPs) measuring 30 nm in diameter were coated with different molecules bearing a thiol group: 3-mercaptopropionic acid, 6-mercaptohexanoic acid, and 11-mercaptoundecanoic acid. The covalent conjugation of AuNPs to the protein bovine serum albumin (BSA) via a cross-linker reaction with N-hydroxysuccinimide and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide was systematically investigated under different reaction conditions with variation of the concentrations of the mercaptoalkyl carboxylic acid (MA) and BSA. All the products were analyzed by UV-vis spectroscopy, gel electrophoresis, and Raman spectroscopy in every modification step. From analysis of the UV-vis results, it is possible at low concentrations of MA to see strong coupling among AuNPs, observed when they are aggregated by KCl, which does not happen at higher concentration of MA, indicating an AuNP-to-MA ratio of 1:130,000 is best for bioconjugation purposes. Agarose gel electrophoresis, a classic technique for biomolecule characterization, indicated that BSA is capable of altering the mobility of AuNPs when it modifies completely the surface of AuNPs because of its high molecular mass (around 66 kDa). Principal component analysis of surface-enhanced Raman spectroscopy data was successfully used as a chemometric tool to assist the characterization of the nanoparticle modification with linker molecules in the absence and presence of different BSA concentrations, making it possible to clearly evaluate the gradual substitution/modification of AuNPs (1:13,000 < 1:65,000 < 1:130,000 AuNP-to-MA ratio) and the conjugation with BSA, which is homogenous at a concentration of 0.01 g L-1. Graphical abstract.
Assuntos
Ácidos Carboxílicos/química , Eletroforese em Gel de Ágar/métodos , Ouro/química , Nanopartículas Metálicas/química , Soroalbumina Bovina/química , Espectrofotometria Ultravioleta/métodos , Análise Espectral Raman/métodos , Análise de Componente Principal , Propriedades de SuperfícieRESUMO
This work describes an easy synthesis (one pot) of MFe(2)O(4) (M = Co, Fe, Mn, and Ni) magnetic nanoparticles MNPs by the thermal decomposition of Fe(Acac)(3)/M(Acac)(2) by using BMI·NTf(2) (1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) or BMI·PF(6) (1-n-butyl-3-methylimidazolium hexafluorophosphate) ionic liquids (ILs) as recycling solvents and oleylamine as the reducing and surface modifier agent. The effects of reaction temperature and reaction time on the features of the magnetic nanomaterials (size and magnetic properties) were investigated. The growth of the MNPs is easily controlled in the IL by adjusting the reaction temperature and time, as inferred from Fe(3)O(4) MNPs obtained at 150 °C, 200 °C and 250 °C with mean diameters of 8, 10 and 15 nm, respectively. However, the thermal decomposition of Fe(Acac)(3) performed in a conventional high boiling point solvent (diphenyl ether, bp 259 °C), under a similar Fe to oleylamine molar ratio used in the IL synthesis, does not follow the same growth mechanism and rendered only smaller NPs of 5 nm mean diameter. All MNPs are covered by at least one monolayer of oleylamine making them readily dispersible in non-polar solvents. Besides the influence on the nanoparticles growth, which is important for the preparation of highly crystalline MNPs, the IL was easily recycled and has been used in at least 20 successive syntheses.
Assuntos
Líquidos Iônicos/química , Nanopartículas de Magnetita/química , Solventes/química , Aminas/química , Óxido Ferroso-Férrico/química , Imidazóis/química , TemperaturaRESUMO
CoFe2O4 nanoparticles were obtained by the co-precipitation method. They were further modified by the adsorption of ricinoleic acid (RA). The non-modified and modified CoFe2O4/RA nanoparticles were characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman, and Fourier transform infrared (FTIR) spectroscopy. The modified particles present a mean diameter < 20 nm. The adsorption of RA on the CoFe2O4 surface is characterized by the IR absorptions of the RA while in the Raman spectrum the predominant signals are those from the CoFe2O4. The cis-polyisoprene (PI) composite was prepared by dissolving PI in cyclohexane followed by the addition of a magnetic fluid based on CoFe2O4/RA nanoparticles dispersed in cyclohexane. After solvent evaporation a magnetic composite was obtained and characterized by AFM, Raman, and FTIR measurements. AFM images show uniformly CoFe2O4/RA particles distributed in the PI matrix. Raman spectra obtained for the composites reveal the characteristic Raman peaks of PI and CoFe2O4 nanoparticles.
RESUMO
A surface-enhanced Raman spectroscopy (SERS) study of imidazolium ionic liquid stabilized gold(0) nanoparticles (GNPs) furnished previously unknown knowledge about the coordination and stabilization mode of the imidazolium cation. GNPs were prepared by hydrazine reduction of a chloroauric acid solution in 1-triethylene glycol monomethyl ether-3-methylimidazolium methanesulfonate 2 as ether-functionalized room-temperature ionic liquid (RTIL). UV-vis spectroscopy showed the presence of GNP aggregates as absorptions extended to the NIR region. A parallel coordination mode for the imidazolium cation of RTIL 2 on the GNP surface was observed by SERS, which occurred without the simultaneous coordination of the 1-triethylene glycol monomethyl ether-functionality. Instead of this, the ether-functionality was directed away from the GNP surface and acted as steric barrier between the GNPs/GNP aggregates, thus preventing further aggregation. These new insights suggest that the imidazolium cation is responsible for electrosteric stabilization.
RESUMO
This is the first report of in situ SER spectra of chemical species adsorbed on a Ag/room temperature ionic liquid (RTIL) interface. We have investigated the dependence of the SERS intensity of the RTIL derived from 1-n-butyl-3-methylimidazolium hexafluorophosfate (BMIPF6) adsorbed on a silver electrode. It has been shown that the BMI+ adsorbs on the silver electrode for potentials more negative than -0.4 V vs a Pt quasireference electrode (PQRE). In the -0.4 to -1.0 V potential range the SER spectra are similar to the Raman spectrum of the RTIL BMIPF6. At potentials more negative than -1.0 V some imidazolium ring vibrational modes and N-CH3 vibrations are enhanced, suggesting that the imidazolium ring is parallel to the surface and for potentials <-2.8 V the BMI+ is reduced to the BMI carbene. The potential dependence of the SERS intensities of Py adsorbed on a silver electrode in BMIPF6 has also been investigated. The results have shown that at potentials less negative than -0.8 V (vs PQRE) Py adsorbs at an end-on configuration forming an Ag-N bond. In the -0.9 to -1.4 V potential range Py molecules lie flat on the electrode surface and at potentials <-1.4 V Py is replaced by the BMI+. The electrochemical and SERS results have shown that Py has the effect of changing the oxidation of silver in that medium as well as the reduction of BMI+ to the BMI carbene. In the presence of Py the BMI+ reduction is observed at potentials near -2.4 V. The Ag electrode has presented SERS activity from 0.0 to -3.0 V.
RESUMO
A comparative study of rubber sheets obtained using formic, acetic, and smoke acid as coagulants is shown for latex obtained from native Amazonian trees and also from commercial cultivated trees. The evaluation of both processes of coagulation was carried out by spectroscopic and physical-chemical analysis, showing no differences in the rubber sheets obtained. This new method of rubber sheet preparation was introduced into Amazonian rainforest rubber tapper communities, which are actually producing in large scale. The physical-mechanical properties were similar among a large sheets made by different rubber tapper communities using this new method.
Assuntos
Ácidos/química , Biotecnologia/métodos , Látex/química , Borracha , Fumaça/análise , Brasil , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Colour modifications caused by exposure to artificial UV radiation (350 nm, UV-A) of four tropical hardwoods, jatobá, angelim vermelho, garapeira, and marupá, have been evaluated by diffuse reflectance spectroscopy and by the CIE-L*a*b* system. To obtain the absorption maxima of the chromophore species formed during UV irradiation, Kubelka-Munk (K-M) difference spectra (non-irradiated-irradiated) have been recorded as a function of exposure time. The K-M difference spectra have shown that the investigated species develop strong absorption bands in the visible region upon UV irradiation that were assigned to the formation of lignin and extractive photodegradation products. The K-M difference spectra and CIE-L*a*b* parameters ( DeltaL, Deltaa, and Deltab) have shown that marupá is the wood species that suffers the major changes upon UV irradiation while angelim vermelho was the least affected.
Assuntos
Cor , Plantas/efeitos da radiação , Raios Ultravioleta , Madeira , Brasil , Colorimetria , Lignina/metabolismo , Análise EspectralRESUMO
Porous silicon (PS) films were investigated by Raman, and photoluminescence (PL) spectroscopies using different laser excitations: 488.0, 514.5, 632.8, and 782.0 nm. The analysis of the first-order and second-order Raman spectra have shown that the band gaps of the PS films are indirect as in the bulk c-Si. The Raman phonon and the PL spectra as well as the spectral distribution of the linear polarisation degree (LPD) of PS layers have shown to be dependent on the laser excitation energy. This dependence cannot be explained within the quantum confinement model. A mechanism for the PL emission in PS layers is presented in which the radiative recombination of electron-hole pairs occurs in localised centres (the Si-O-SiR moieties) at the pore/crystallite interface. These quasi-molecular centres are Jahn-Teller active, i.e. the radiative recombination is a phonon-assisted phenomena. The adsorption of gas molecules on the porous silicon surface was studied throughout photoluminescence quenching effect. The adsorption experiments were performed at 10(-6) bar of pressure using gas molecules of organic solvents. In all these cases, the PL intensity was recovered after gas desorption. The PL quenching effect was explained in the sense of electron transfer mechanism (ET).
Assuntos
Luz , Medições Luminescentes/métodos , Compostos de Silício/química , Silício/química , Análise Espectral Raman/métodos , Adsorção , Núcleo Celular/metabolismo , Elétrons , Gases , Lasers , Distribuição Normal , Fótons , Recombinação Genética , Espectrofotometria , TermodinâmicaRESUMO
Maghemite nanoparticles (MNPs) were functionalized with glycine, by a cost-effective and environmentally friendly procedure, as an alternative route to typical amine-functionalized polymeric coatings, for highly efficient removal of copper ions from water. MNPs were synthesized by co-precipitation method and adsorption of glycine was investigated as a function of ligand concentration and pH. The efficiency of these functionalized nanoparticles for removal of Cu(2+) from water has been explored and showed that adsorption is highly dependent of pH and that it occurs either by forming chelate complexes and/or by electrostatic interaction. The adsorption process, which reaches equilibrium in few minutes and fits a pseudo second-order model, follows the Langmuir adsorption model with a very high maximum adsorption capacity for Cu(2+) of 625mg/g. Furthermore, these nanoadsorbents can be used as highly efficient separable and reusable materials for removal of toxic metal ions.
Assuntos
Cobre/isolamento & purificação , Compostos Férricos/química , Glicina/química , Nanopartículas Metálicas/química , Poluentes Químicos da Água/isolamento & purificação , Águas Residuárias/químicaRESUMO
ÌThis paper reports on the advancement of magnetic ionic liquids (MILs) as stable dispersions of surface-modified γ-Fe(2)O(3), Fe(3)O(4), and CoFe(2)O(4) magnetic nanoparticles (MNPs) in a hydrophobic ionic liquid, 1-n-butyl 3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI.NTf(2)). The MNPs were obtained via coprecipitation and were characterized using powder X-ray diffraction, transmission electron microscopy, Raman spectroscopy and Fourier transform near-infrared (FT-NIR) spectroscopy, and magnetic measurements. The surface-modified MNPs (SM-MNPs) were obtained via the silanization of the MNPs with the aid of 1-butyl-3-[3-(trimethoxysilyl)propyl]imidazolium chloride (BMSPI.Cl). The SM-MNPs were characterized by Raman spectroscopy and Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy and by magnetic measurements. The FTIR-ATR spectra of the SM-MNPs exhibited characteristic absorptions of the imidazolium and those of the Fe-O-Si-C moieties, confirming the presence of BMSPI.Cl on the MNP surface. Thermogravimetric analysis (TGA) showed that the SM-MNPs were modified by at least one BMSPI.Cl monolayer. The MILs were characterized using Raman spectroscopy, differential scanning calorimetry (DSC), and magnetic measurements. The Raman and DSC results indicated an interaction between the SM-MNPs and the IL. This interaction promotes the formation of a supramolecular structure close to the MNP surface that mimics the IL structure and is responsible for the stability of the MIL. Magnetic measurements of the MILs indicated no hysteresis. Superparamagnetic behavior and a saturation magnetization of ~22 emu/g could be inferred from the magnetic measurements of a sample containing 50% w/w γ-Fe(2)O(3) SM-MNP/BMI.NTf(2).
Assuntos
Imidazóis/química , Imidas/química , Líquidos Iônicos/química , Nanopartículas de Magnetita/química , Compostos Férricos/química , Óxido Ferroso-Férrico/química , Interações Hidrofóbicas e Hidrofílicas , TermogravimetriaRESUMO
The intensity of high harmonics and the background observed in the SERRS spectra of the bis(4-chlorbenzylimido)perylene (CLPTCD), spin-coated onto silver nanostructures are discussed. The SERRS spectra of an Ag island film spin coated with 50 microL of a 8.7 x 10(-7) M of CLPTCD in CH2Cl2 excited at 514.5 nm show signals from the first to the third overtones and combinations of fundamental vibrational modes observed between 1200 and 1600 cm(-1). SERRS spectra were obtained where 2nd overtones were seen with relative intensity equal to that of the 1st overtones and in other SERRS spectra the 3rd overtones were more intense than the 2nd overtones. These varying intensity patterns are seen at submonolayer coverage where there is a breakdown of statistical average, and the spatial distribution of enhancement factors becomes evident. The apparent correlation between the background intensity profile and the enhancement of the overtones and combinations is also discussed.
RESUMO
In this work it has been shown that the routine ASTM methods (ASTM 4052, ASTM D 445, ASTM D 4737, ASTM D 93, and ASTM D 86) recommended by the ANP (the Brazilian National Agency for Petroleum, Natural Gas and Biofuels) to determine the quality of diesel/biodiesel blends are not suitable to prevent the adulteration of B2 or B5 blends with vegetable oils. Considering the previous and actual problems with fuel adulterations in Brazil, we have investigated the application of vibrational spectroscopy (Fourier transform (FT) near infrared spectrometry and FT-Raman) to identify adulterations of B2 and B5 blends with vegetable oils. Partial least square regression (PLS), principal component regression (PCR), and artificial neural network (ANN) calibration models were designed and their relative performances were evaluated by external validation using the F-test. The PCR, PLS, and ANN calibration models based on the Fourier transform (FT) near infrared spectrometry and FT-Raman spectroscopy were designed using 120 samples. Other 62 samples were used in the validation and external validation, for a total of 182 samples. The results have shown that among the designed calibration models, the ANN/FT-Raman presented the best accuracy (0.028%, w/w) for samples used in the external validation.
Assuntos
Técnicas de Química Analítica/métodos , Gasolina , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Análise Espectral Raman/métodos , Calibragem , Redes Neurais de Computação , Óleos de Plantas , Reação em Cadeia da Polimerase , Análise de Componente Principal , Análise de Regressão , Software , Glycine max/metabolismo , TemperaturaRESUMO
Partial last square regression (PLS) and artificial neural network (ANN) combined to FTIR-ATR and FTNIR spectroscopies have been used to design calibration models for the determination of methyl ester content (%, w/w) in biodiesel blends (methyl ester+diesel). Methyl esters were obtained by the methanolysis of soybean, babassu, dende, and soybean fried oils. Two sets of samples have been used: Group I, binary mixtures (diesel+one kind of methyl ester), corresponding to 96 biodiesel blends (0-100%, w/w), and Group II, quaternary mixtures (diesel+three types of methyl esters), corresponding to 60 biodiesel blends (0-100%, w/w). The PLS results have shown that the FTNIR model for Group I is more precise and accurate (+/-0.02 and +/-0.06%, w/w). In the case of Group II the PLS models (FTIR-ATR and FTNIR) have shown the same accuracies, while the ANN/FTNIR models has presented better performance than the ANN/FTIR-ATR models. The best accuracy was achieved by the ANN/FTNIR model for diesel determination (0.14%, w/w) while the worthiest was that of dende ANN/FTIR-ATR model (0.6%, w/w). Precisions in Group II analysis ranged from 0.06 to 0.53% (w/w) and coefficients of variation were better than 3% indicating that these models are suitable for the determination of diesel-biodiesel blends composed of methyl esters derived from different vegetable oils.