In situ Raman reveals the critical role of Pd in electrocatalytic CO2 reduction to CH4 on Cu-based catalysts.

Electrocatalytic CO2 reduction reaction (CO2RR) for CH4 production presents a promising strategy to address carbon neutrality, and the incorporation of a second metal has been proven effective in enhancing catalyst performance. Nevertheless, there remains limited comprehension regarding the fundamental factors responsible for the improved performance. Herein, the critical role of Pd in electrocatalytic CO2 reduction to CH4 on Cu-based catalysts has been revealed at a molecular level using in situ surface-enhanced Raman spectroscopy (SERS). A "borrowing" SERS strategy has been developed by depositing Cu-Pd overlayers on plasmonic Au nanoparticles to achieve the in situ monitoring of the dynamic change of the intermediate during CO2RR. Electrochemical tests demonstrate that Pd incorporation significantly enhances selectivity toward CH4 production, and the Faradaic efficiency (FE) of CH4 is more than two times higher than that for the catalysts without Pd. The key intermediates, including *CO2-, *CO, and *OH, have been directly identified under CO2RR conditions, and their evolution with the electrochemical environments has been determined. It is found that Pd incorporation promotes the activation of both CO2 and H2O molecules and accelerates the formation of abundant active *CO and hydrogen species, thus enhancing the CH4 selectivity. This work offers fundamental insights into the understanding of the molecular mechanism of CO2RR and opens up possibilities for designing more efficient electrocatalysts.

Covalent Modification of Highly Ordered Pyrolytic Graphite with a Stable Organic Free Radical by Using Diazonium Chemistry.

A novel, persistent, electrochemically active perchlorinated triphenylmethyl (PTM) radical with a diazonium functionality has been covalently attached to highly ordered pyrolytic graphite (HOPG) by electrografting in a single-step process. Electrochemical scanning tunneling microscopy (EC-STM) and Raman spectroscopy measurements revealed that PTM molecules had a higher tendency to covalently react at the HOPG step edges. The cross-section profiles from EC-STM images showed that there was current enhancement at the functionalized areas, which could be explained by redox-mediated electron tunneling through surface-confined redox-active molecules. Cyclic voltammetry clearly demonstrated that the intrinsic properties of the organic radical were preserved upon grafting and DFT calculations also revealed that the magnetic character of the PTM radical was preserved.

Transport Matters: Boosting CO2 Electroreduction in Mixtures of [BMIm][BF4 ]/Water by Enhanced Diffusion.

Room-temperature ionic liquids (RTILs) are promising new electrolytes for efficient carbon dioxide reduction. However, due to their high viscosity, the mass transport of CO2 in RTILs is typically slow, at least one order of magnitude slower than in aqueous systems. One possibility to improve mass transport in RTILs is to decrease their viscosity through dilution with water. Herein, defined amounts of water are added to 1-butyl-3methylimidazolium tetrafluoroborate ([BMIm][BF4 ]), which is a hydrophilic RTIL. Electrochemical measurements on quiescent and hydrodynamic systems both indicate enhanced CO2 electroreduction. This enhancement has its origin in thermodynamic/kinetic effects (the addition of water increases the availability of H+ , which is a reaction partner of CO2 electroreduction) and in an increased rate of transport due to lower viscosity. Electrochemically determined diffusion coefficients for CO2 in [BMIm][BF4 ]/water systems agree well with values determined by NMR spectroscopy.

Single Graphene Layer on Pt(111) Creates Confined Electrochemical Environment via Selective Ion Transport.

Graphene is a promising candidate for an ideal membrane material. Its ultralow (one-atomic) thickness potentially provides high permeation and at the same time high selectivity. Here, it is shown that these properties can be used to create a confined, two-dimensional electrochemical environment between a graphene layer and a single-crystal Pt(111) surface. The well-defined fingerprint voltammetric characteristics of Pt(111) provide an immediate information about the penetration and intercalation of ions into the confined space. These processes are shown to be highly selective.

A redox-active radical as an effective nanoelectronic component: stability and electrochemical tunnelling spectroscopy in ionic liquids.

A redox-active persistent perchlorotriphenylmethyl (PTM) radical chemically linked to gold exhibits stable electrochemical activity in ionic liquids. Electrochemical tunnelling spectroscopy in this medium demonstrates that the PTM radical shows a highly effective redox-mediated current enhancement, demonstrating its applicability as an active nanometer-scale electronic component.

Break junction under electrochemical gating: testbed for single-molecule electronics.

Molecular electronics aims to construct functional molecular devices at the single-molecule scale. One of the major challenges is to construct a single-molecule junction and to further manipulate the charge transport through the molecular junction. Break junction techniques, including STM break junctions and mechanically controllable break junctions are considered as testbed to investigate and control the charge transport on a single-molecule scale. Moreover, additional electrochemical gating provides a unique opportunity to manipulate the energy alignment and molecular redox processes for a single-molecule junction. In this review, we start from the technical aspects of the break junction technique, then discuss the molecular structure-conductance correlation derived from break junction studies, and, finally, emphasize electrochemical gating as a promising method for the functional molecular devices.

In Situ Monitoring of Electrooxidation Processes at Gold Single Crystal Surfaces Using Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy.

Identifying the intermediate species in an electrocatalytic reaction can provide a great opportunity to understand the reaction mechanism and fabricate a better catalyst. However, the direct observation of intermediate species at a single crystal surface is a daunting challenge for spectroscopic techniques. In this work, electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy (EC-SHINERS) is utilized to in situ monitor the electrooxidation processes at atomically flat Au(hkl) single crystal electrode surfaces. We systematically explored the effects of crystallographic orientation, pH value, and anion on electrochemical behavior of intermediate (AuOH/AuO) species. The experimental results are well correlated with our periodic density functional theory calculations and corroborate the long-standing speculation based on theoretical calculations in previous electrochemical studies. The presented in situ electrochemical SHINERS technique offers a unique way for a real-time investigation of an electrocatalytic reaction pathway at various well-defined noble metal surfaces.

Electrochemical shell-isolated nanoparticle-enhanced Raman spectroscopy: correlating structural information and adsorption processes of pyridine at the Au(hkl) single crystal/solution interface.

Electrochemical methods are combined with shell-isolated nanoparticle-enhanced Raman spectroscopy (EC-SHINERS) for a comprehensive study of pyridine adsorption on Au(111), Au(100) and Au(110) single crystal electrode surfaces. The effects of crystallographic orientation, pyridine concentration, and applied potential are elucidated, and the formation of a second pyridine adlayer on Au(111) is observed spectroscopically for the first time. Electrochemical and SHINERS results correlate extremely well throughout this study, and we demonstrate the potential of EC-SHINERS for thorough characterization of processes occurring on single crystal surfaces. Our method is expected to open up many new possibilities in surface science, electrochemistry and catalysis. Analytical figures of merit are discussed.

DNA-Grafted Supramolecular Polymers: Helical Ribbon Structures Formed by Self-Assembly of Pyrene-DNA Chimeric Oligomers.

The controlled arraying of DNA strands on adaptive polymeric platforms remains a challenge. Here, the noncovalent synthesis of DNA-grafted supramolecular polymers from short chimeric oligomers is presented. The oligomers are composed of an oligopyrenotide strand attached to the 5'-end of an oligodeoxynucleotide. The supramolecular polymerization of these oligomers in an aqueous medium leads to the formation of one-dimensional (1D) helical ribbon structures. Atomic force and transmission electron microscopy show rod-like polymers of several hundred nanometers in length. DNA-grafted polymers of the type described herein will serve as models for the development of structurally and functionally diverse supramolecular platforms with applications in materials science and diagnostics.

Electrochemical control of single-molecule conductance by Fermi-level tuning and conjugation switching.

Controlling charge transport through a single molecule connected to metallic electrodes remains one of the most fundamental challenges of nanoelectronics. Here we use electrochemical gating to reversibly tune the conductance of two different organic molecules, both containing anthraquinone (AQ) centers, over >1 order of magnitude. For electrode potentials outside the redox-active region, the effect of the gate is simply to shift the molecular energy levels relative to the metal Fermi level. At the redox potential, the conductance changes abruptly as the AQ unit is oxidized/reduced with an accompanying change in the conjugation pattern between linear and cross conjugation. The most significant change in conductance is observed when the electron pathway connecting the two electrodes is via the AQ unit. This is consistent with the expected occurrence of destructive quantum interference in that case. The experimental results are supported by an excellent agreement with ab initio transport calculations.

Promising anchoring groups for single-molecule conductance measurements.

The understanding of the charge transport through single molecule junctions is a prerequisite for the design and building of electronic circuits based on single molecule junctions. However, reliable and robust formation of such junctions is a challenging task to achieve. In this topical review, we present a systematic investigation of the anchoring group effect on single molecule junction conductance by employing two complementary techniques, namely scanning tunneling microscopy break junction (STM-BJ) and mechanically controllable break junction (MCBJ) techniques, based on the studies published in the literature and important results from our own work. We compared conductance studies for conventional anchoring groups described earlier with the molecular junctions formed through π-interactions with the electrode surface (Au, Pt, Ag) and we also summarized recent developments in the formation of highly conducting covalent Au-C σ-bonds using oligophenyleneethynylene (OPE) and an alkane molecular backbone. Specifically, we focus on the electron transport properties of diaryloligoyne, oligophenyleneethynylene (OPE) and/or alkane molecular junctions composed of several traditional anchoring groups, (dihydrobenzo[b]thiophene (BT), 5-benzothienyl analogue (BTh), thiol (SH), pyridyl (PY), amine (NH2), cyano (CN), methyl sulphide (SMe), nitro (NO2)) and other anchoring groups at the solid/liquid interface. The qualitative and quantitative comparison of the results obtained with different anchoring groups reveals structural and mechanistic details of the different types of single molecular junctions. The results reported in this prospective may serve as a guideline for the design and synthesis of molecular systems to be used in molecule-based electronic devices.

Formation of two-dimensional supramolecular polymers by amphiphilic pyrene oligomers.

Reading the bands: Amphiphilic pyrene trimers self-assemble into two-dimensional, supramolecular polymers in aqueous medium. Folding and aggregation processes are accompanied by simultaneous development of J- and H-bands and significant changes in the fluorescence properties. The formation of sheet-like nano-structures is confirmed by AFM.

Effective perspiration is essential to uphold the stability of zero-gap MEA-based cathodes used in CO2 electrolysers.

The application of gas diffusion electrodes (GDEs) for the electrochemical reduction of CO2 to value-added products creates the possibility of achieving current densities of a few hundred mA cm-2. To achieve stable operation at such high reaction rates remains, however, a challenging task, due to the flooding of the GDE. In order to mitigate flooding in a zero-gap membrane-electrode assembly (MEA) configuration, paths for effective electrolyte perspiration inside the GDE structure have to be kept open during the electrolysis process. Here we demonstrate that apart from the operational parameters of the electrolysis and the structural properties of the supporting gas diffusion layers, also the chemical composition of the applied catalyst inks can play a decisive role in the electrolyte management of GDEs used for CO2 electroreduction. In particular, the presence of excess amounts of polymeric capping agents (used to stabilize the catalyst nanoparticles) can lead to a blockage of micropores, which hinders perspiration and initiates the flooding of the microporous layer. Here we use a novel ICP-MS analysis-based approach to quantitatively monitor the amount of perspired electrolyte that exits a GDE-based CO2 electrolyser, and we show a direct correlation between the break-down of effective perspiration and the appearance of flooding-the latter ultimately leading to a loss of electrolyser stability. We recommend the use of an ultracentrifugation-based approach by which catalyst inks containing no excess amount of polymeric capping agents can be formulated. Using these inks, the stability of electrolyses can be ensured for much longer times.

Oxo-functionalised mesoionic NHC nickel complexes for selective electrocatalytic reduction of CO2 to formate.

Strategies for the conversion of CO2 to valuable products are paramount for reducing the environmental risks associated with high levels of this greenhouse gas and offer unique opportunities for transforming waste into useful products. While catalysts based on nickel as an Earth-abundant metal for the sustainable reduction of CO2 are known, the vast majority produce predominantly CO as a product. Here, efficient and selective CO2 reduction to formate as a synthetically valuable product has been accomplished with novel nickel complexes containing a tailored C,O-bidentate chelating mesoionic carbene ligand. These nickel(ii) complexes are easily accessible and show excellent catalytic activity for electrochemical H+ reduction to H2 (from HOAc in MeCN), and CO2 reduction (from CO2-saturated MeOH/MeCN solution) with high faradaic efficiency to yield formate exclusively as an industrially and synthetically valuable product from CO2. The most active catalyst precursor features the 4,6-di-tert-butyl substituted phenolate triazolylidene ligand, tolerates different proton donors including water, and reaches an unprecedented faradaic efficiency of 83% for formate production, constituting the most active and selective Ni-based system known to date for converting CO2 into formate as an important commodity chemical.

A General and Facile Approach for the Electrochemical Reduction of Carbon Dioxide Inspired by Deep Eutectic Solvents.

Deep eutectic solvents (DESs) were applied to the electrochemical CO2 reduction reaction (CO2 RR). Choline-based DESs represent a non-toxic and inexpensive alternative to room-temperature ionic liquids (RTILs) as additives to the system or as electrolyte. Following the study on choline-based DESs this approach was generalized and simple and organic-soluble systems were devised based on the combination of organic chloride salts with ethylene glycol (EG), allowing the chlorides to be readily used as cocatalysts in the CO2 RR. This approach negates the need for anion exchange and, because the chloride salt is usually the least expensive one, substantially reduces the cost of the electrolyte and opens the way for high-throughput experimentation.

Stable anchoring chemistry for room temperature charge transport through graphite-molecule contacts.

An open challenge for single-molecule electronics is to find stable contacts at room temperature with a well-defined conductance. Common coinage metal electrodes pose fabrication and operational problems due to the high mobility of the surface atoms. We demonstrate how molecules covalently grafted onto mechanically robust graphite/graphene substrates overcome these limitations. To this aim, we explore the effect of the anchoring group chemistry on the charge transport properties of graphite-molecule contacts by means of the scanning tunneling microscopy break-junction technique and ab initio simulations. Molecules adsorbed on graphite only via van der Waals interactions have a conductance that decreases exponentially upon stretching the junctions, whereas the molecules bonded covalently to graphite have a single well-defined conductance and yield contacts of unprecedented stability at room temperature. Our results demonstrate a strong bias dependence of the single-molecule conductance, which varies over more than one order of magnitude even at low bias voltages, and show an opposite rectification behavior for covalent and noncovalent contacts. We demonstrate that this bias-dependent conductance and opposite rectification behavior is due to a novel effect caused by the nonconstant, highly dispersive density of states of graphite around the Fermi energy and that the direction of rectification is governed by the detailed nature of the molecule/graphite contact. Combined with the prospect of new functionalities due to a strongly bias-dependent conductance, these covalent contacts are ideal candidates for next-generation molecular electronic devices.

Preclinical characterization of anticancer gallium(III) complexes: solubility, stability, lipophilicity and binding to serum proteins.

The discovery and development of gallium(III) complexes capable of inhibiting tumor growth is an emerging area of anticancer drug research. A range of novel gallium coordination compounds with established cytotoxic efficacy have been characterized in terms of desirable chemical and biochemical properties and compared with tris(8-quinolinolato)gallium(III) (KP46), a lead anticancer gallium-based candidate that successfully finished phase I clinical trials (under the name FFC11), showing activity against renal cell cancer. In view of probable oral administration, drug-like parameters, such as solubility in water, saline and 0.5% dimethyl sulfoxide, stability against hydrolysis, measured as the rate constant of hydrolytic degradation in water or physiological buffer using a capillary zone electrophoresis (CZE) assay, and the octanol-water partition coefficient (logP) providing a rational estimate of a drug's lipophilicity, have been evaluated and compared. The differences in bioavailability characteristics between different complexes were discussed within the formalism of structure-activity relationships. The reactivity toward major serum transport proteins, albumin and transferrin, was also assayed in order to elucidate the drug's distribution pathway after intestinal absorption. According to the values of apparent binding rate constants determined by CZE, both KP46 and bis(2-acetylpyridine-4,4-dimethyl-3-thiosemicarbazonato-N,N,S)gallium(III) tetrachlorogallate(III) (KP1089) bind to transferrin faster than to albumin. This implies that transferrin would rather mediate the accumulation of gallium antineoplastic agents in solid tumors. A tendency of being faster converted into the protein-bound form found for KP1089 (due possibly to non-covalent binding) seems complementary to its greater in vitro antiproliferative activity.

Tubes or sheets: divergent aggregation pathways of an amphiphilic 2,7-substituted pyrene trimer.

The self-assembly of an amphiphilic 2,7-linked pyrene trimer in an aqueous environment into two morphologically related forms is described. Supramolecular polymerization leads to the simultaneous formation of nanosheets and nanotubes.

Application of micellar and microemulsion electrokinetic chromatography for characterization of gallium(III) complexes of pharmaceutical significance.

CE with conventional UV detection has recently been shown as a highly effective means to assaying cytotoxic gallium(III)-based compounds with regard to desirable drug-like properties such as the stability and binding to serum proteins. In this extension of that work, different CE techniques are used to further characterize a given set of gallium coordination compounds with established antiproliferating efficacy. Using free-zone CE mode, the electrophoretic profiles of complexes are recorded in order to assess their actual charge state under physiological buffer conditions. Micellar and microemulsion electrokinetic chromatographic techniques are tested as tools for the rapid estimation of the n-octanol-water partition coefficient (log P) that provides a rationale estimate of a drug's ability to cross biological membranes. A range of electrolyte buffer systems with varying (both in the nature and concentration) organic modifiers are examined to evaluate their effect on the relationship between experimental or calculated log P and the retention factors of compounds (log k'). Both methods were found to be better applicable for neutral than for cationic Ga complexes, the microemulsion mode demonstrating superior lipophilicity estimations as well as statistically meaningful log P versus log k' correlations when all the complexes were included in one regression set.

Probing the stability of serum protein-ruthenium(III) drug adducts in the presence of extracellular reductants using CE.

A CE kinetic assay was developed to study the stability of the adducts of a novel ruthenium(III)-based anticancer agent with serum proteins under simulated reductive physiological conditions. Formation of the reactive Ru(II) species and their release from the serum proteins are thought to play an important role in the mode-of-action of indazolium trans-[tetrachlorobis(1H-indazole)ruthenate(III)] (KP1019) which has successfully finished a clinical phase I study. The CE method was adapted, in zone electrophoresis and affinity CE modes, to make obvious that such transformation would take place in the hypoxic tumor tissue rather than in the bloodstream. Indeed, no measurable effect of extracellular concentration levels of glutathione incorporated into the BGE on the UV signals of albumin and transferrin adducts was observed over 30 min of examination. Incubation of the KP1019-albumin adduct with the major blood reducing agent, ascorbic acid, revealed no changes in the continuously monitored peak areas (average corrected responses were 9.56 +/- 0.86 and 9.87 +/- 0.60 mAU for the adduct and its mixtures with ascorbic acid in the physiological range of 1 x 10(-5) -8 x 10(-5) M, respectively). On the other hand, both the transferrin adduct and transferrin itself accelerated the oxidation of ascorbic acid; however, the oxidation rate constants measured by CE were virtually the same: (19.1 +/- 4.4) x 10(-3) and (18.2 +/- 5.0) x 10(-3) min(-1), respectively. In order to confirm more unambiguously the stability of KP1019-protein adducts in the presence of ascorbic acid (UV absorbance detection does not distinguish the adduct and protein signals), CE with inductively coupled plasma (ICP) MS detection was applied to follow metal-selectively the signal of bound ruthenium, which remained unaffected by this reducing agent. This work appears the first to present the application of CE to the stability studies of the protein-bound metallodrugs.