NaBix/NaVyOz Hybrid Interfacial Layer Enables Stable and Dendrite-Free Sodium Anodes.

The challenges of sodium metal anodes, including formation of an unstable solid-electrolyte interphase (SEI) and uncontrolled growth of sodium dendrites during charge-discharge cycles, impact the stability and safety of sodium metal batteries. Motivated by the promising commercialization potential of sodium metal batteries, it becomes imperative to systematically explore innovative protective interlayers specifically tailored for sodium metal anodes. In this work, a NaBix/NaVyOz hybrid and porous interfacial layer on sodium anode is successfully fabricated via pretreating sodium with bismuth vanadate. The hybrid interlayer effectively combines the advantages of sodium vanadates and alloys, raising a synergistic effect in facilitating sodium deposition kinetics and inhibiting the growth of sodium dendrites. As a result, the modified sodium electrodes (BVO-Na) can stably cycle for 2000 h at 0.5 mA cm-2 with a fixed capacity of 1 mAh cm-2, and the BVO-Na||Na3V2(PO4)3 full cell sustains a high capacity of 94 mAh g-1 after 600 cycles at 5 C. This work demonstrates that constructing an artificial hybrid interlayer is a practical solution to obtain high performance anodes in sodium metal batteries.

Recent Advancements of Graphene-Based Materials for Zinc-Based Batteries: Beyond Lithium-Ion Batteries.

Graphene-based materials (GBMs) possess a unique set of properties including tunable interlayer channels, high specific surface area, and good electrical conductivity characteristics, making it a promising material of choice for making electrode in rechargeable batteries. Lithium-ion batteries (LIBs) currently dominate the commercial rechargeable battery market, but their further development has been hampered by limited lithium resources, high lithium costs, and organic electrolyte safety concerns. From the performance, safety, and cost aspects, zinc-based rechargeable batteries have become a promising alternative of rechargeable batteries. This review highlights recent advancements and development of a variety of graphene derivative-based materials and its composites, with a focus on their potential applications in rechargeable batteries such as LIBs, zinc-air batteries (ZABs), zinc-ion batteries (ZIBs), and zinc-iodine batteries (Zn-I2 Bs). Finally, there is an outlook on the challenges and future directions of this great potential research field.

Tailoring Na+ Solvation Environment and Electrode-Electrolyte Interphases with Sn(OTf)2 Additive in Non-flammable Phosphate Electrolytes towards Safe and Efficient Na-S Batteries.

Room-temperature sodium-sulfur (RT Na-S) batteries are promising for low-cost and large-scale energy storage applications. However, these batteries are plagued by safety concerns due to the highly flammable nature of conventional electrolytes. Although non-flammable electrolytes eliminate the risk of fire, they often result in compromised battery performance due to poor compatibility with sodium metal anode and sulfur cathode. Herein, we develop an additive of tin trifluoromethanesulfonate (Sn(OTf)2 ) in non-flammable phosphate electrolytes to improve the cycling stability of RT Na-S batteries via modulating the Na+ solvation environment and interface chemistry. The additive reduces the Na+ desolvation energy and enhances the electrolyte stability. Moreover, it facilitates the construction of Na-Sn alloy-based anode solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI). These interphases help to suppress the growth of Na dendrites and the dissolution/shuttling of sodium polysulfides (NaPSs), resulting in improved reversible capacity. Specifically, the Na-S battery with the designed electrolyte boosts the capacity from 322 to 906 mAh g-1 at 0.5 A g-1 . This study provides valuable insights for the development of safe and high-performance electrolytes in RT Na-S batteries.

Enhancing Interfacial Strength and Wettability for Wide-Temperature Sodium Metal Batteries.

Development of high-performance sodium metal batteries (SMBs) with a wide operating temperature range (from -40 to 55 °C) is highly challenging. Herein, an artificial hybrid interlayer composed of sodium phosphide (Na3 P) and metal vanadium (V) is constructed for wide-temperature-range SMBs via vanadium phosphide pretreatment. As evidenced by simulation, the VP-Na interlayer can regulate redistribution of Na+ flux, which is beneficial for homogeneous Na deposition. Moreover, the experimental results confirm that the artificial hybrid interlayer possesses a high Young's modulus and a compact structure, which can effectively suppress Na dendrite growth and alleviate the parasitic reaction even at 55 °C. In addition, the VP-Na interlayer exhibits the capability to knock down the kinetic barriers for fast Na+ transportation, realizing a 30-fold decrease in impedance at -40 °C. Symmetrical VP-Na cells present a prolonged lifespan reaching 1200, 500, and 500 h at room temperature, 55 °C and -40 °C, respectively. In Na3 V2 (PO4 )3 ||VP-Na full cells, a high reversible capacity of 88, 89.8, and 50.3 mAh g-1 can be sustained after 1600, 1000, and 600 cycles at room temperature, 55 °C and -40 °C, respectively. The pretreatment formed artificial hybrid interlayer proves to be an effective strategy to achieve wide-temperature-range SMBs.

Construction of Inorganic/Organic Hybrid Layer for Stable Na Metal Anode Operated under Wide Temperatures.

Sodium metal battery is supposed to be a propitious technology for high-energy storage application owing to the advantages of natural abundance and low cost. Unfortunately, the uncontrollable dendrite growth critically hampers its practical implementation. Herein, an inorganic/organic hybrid layer of NaF/CF/CC on the surface of Na foil (IOHL-Na) is designed and synthesized through the in situ reaction of polyvinylidene fluoride (PVDF) and metallic sodium. This protective layer possesses satisfactory Young's modulus, good kinetic property, and sodiophilicity, which can distinctly stabilize Na metal anode. As a result, the symmetric IOHL-Na cell achieves a lifespan of 770 h at 1 mAh cm-2 /1 mA cm-2 in carbonate electrolyte. The assembled full battery of IOHL-Na||Na3 V2 (PO4 )3 delivers a high discharge capacity of 85 mAh g-1 at 10 C after 600 cycles under ambient temperature. Furthermore, the IOHL-Na||Na3 V2 (PO4 )3 cell still can steadily operate at 10 C for 600 cycles at 55 °C. And when testing at an ultralow temperature of -40 °C, the full cell achieves 40 mAh g-1 at 0.5 C with a prolonged lifespan of 450 cycles. This work offers a new approach to protect the metal sodium anode without dendrite growth under wide temperatures.

Molecular Engineering on Solvation Structure of Carbonate Electrolyte toward Durable Sodium Metal Battery at -40 °C.

Carbonate electrolytes have excellent chemical stability and high salt solubility, which are ideally practical choice for achieving high-energy-density sodium (Na) metal battery at room temperature. However, their application at ultra-low temperature (-40 °C) is adversely affected by the instability of solid electrolyte interphase (SEI) formed by electrolyte decomposition and the difficulty of desolvation. Here, we designed a novel low-temperature carbonate electrolyte by molecular engineering on solvation structure. The calculations and experimental results demonstrate that ethylene sulfate (ES) reduces the sodium ion desolvation energy and promotes the forming of more inorganic substances on the Na surface, which promote ion migration and inhibit dendrite growth. At -40 °C, the Na||Na symmetric battery exhibits a stable cycle of 1500 hours, and the Na||Na3 V2 (PO4 )3 (NVP) battery achieves 88.2 % capacity retention after 200 cycles.

Toward Complete Transformation of Sodium Polysulfides by Regulating the Second-Shell Coordinating Environment of Atomically Dispersed Fe.

Room temperature sodium-sulfur (RT Na-S) batteries are highly competitive as potential energy storage devices. Nevertheless, their actually achieved reversible capacities are far below the theoretical value due to incomplete transformation of polysulfides. Herein, atomically dispersed Fe-N/S active center by regulating the second-shell coordinating environment of Fe single atom is proposed. The Fe-N4 S2 coordination structure with enhanced local electronic concentration around the Fermi level is revealed via synchrotron radiation X-ray absorption spectroscopy (XAS) and theoretical calculations, which can not only significantly promote the transformation kinetics of polysulfides, but induce uniform Na deposition for dendrite-free Na anode. As a result, the obtained S cathode delivers a high initial reversible capacity of 1590 mAh g-1 , nearly the theoretical value. This work opens up a new avenue to facilitate the complete transformation of polysulfides for RT Na-S batteries.

Structure Engineering of Vanadium Tetrasulfides for High-Capacity and High-Rate Sodium Storage.

Structure engineering of electrode materials can significantly improve the life cycle and rate capability of the sodium-ion battery (SIB), yet remains a challenging task due to the lack of an effective synthetic strategy. Herein, the microstructure of VS4 hollow spheres is successfully engineered through a facile hydrothermal method. The hollow VS4 microspheres possess rich porosity and are covered with 2D ultrathin nanosheets on the surface. The finite element simulation (FES) reveals that such heterostructures can effectively relieve the stress induced by the sodiation and thereby enhance the structural integrity. The SIB with the hollow VS4 microspheres as anode displays impressively high specific capacity, excellent stability upon ultra-long cycling, and extraordinary rate capacity, e.g., a reversible capacity of ≈378 mA h g-1 at ultra-high 10 A g-1 , while retaining 73.2% capacity after 1000 cycles. The Na storage mechanism is also elucidated through in situ/ex situ characterizations. Moreover, the hollow VS4 microspheres demonstrate reliable rate performance at a low temperature of -40 °C (e.g., the capacity is ≈163 mA h g-1 at 2 A g-1 ). This work provides novel insights toward high-performance SIBs.

Special Issue: Next Generation Metal-Ion Batteries.

Recently, rechargeable metal-ion batteries have been the research focus for their long cycle life and high energy density. In this special issue, we collected 30 researcch and review papers that cover the research progress of electrode materials, separators, and electrolytes in various advanced metal-ion and other energy storage devices.

Vanadium Tetrasulfide for Next-Generation Rechargeable Batteries: Advances and Challenges.

Alkali metal-ion batteries (SIBs and PIBs) and multivalent metal-ion batteries (ZIBs, MIBs, and AIBs), among the next-generation rechargeable batteries, are deemed appealing alternatives to lithium-ion batteries (LIBs) because of their cost competitiveness. Improving the electrochemical properties of electrode materials can greatly accelerate the pace of development in battery systems to cover the increasing demands of realistic applications. Vanadium tetrasulfide (VS4 ) is known as a prospective electrode material due to its unique one-dimensional atomic chain structure with a large chain spacing, weak interactions between adjacent chains, and high sulfur content. This review summarizes the synthetic strategies and recent advances of VS4 as cathodes/anodes for rechargeable batteries. Meanwhile, we describe the structural characteristics and electrochemical properties of VS4 . And we describe in detail its specific applications in batteries such as SIBs, PIBs, ZIBs, MIBs, and AIBs as well as modification strategies. Finally, the opportunities and challenges of VS4 in the domain of energy research are described.

Vanadium-Based Materials: Next Generation Electrodes Powering the Battery Revolution?

ConspectusAs the world transitions away from fossil fuels, energy storage, especially rechargeable batteries, could have a big role to play. Though rechargeable batteries have dramatically changed the energy landscape, their performance metrics still need to be further enhanced to keep pace with the changing consumer preferences along with the increasing demands from the market. For the most part, advances in battery technology rely on the continuing development of materials science, where the development of high-performance electrode materials helps to expand the world of battery innovation by pushing the limits of performance of existing batteries. This is where vanadium-based compounds (V-compounds) with intriguing properties can fit in to fill the gap of the current battery technologies.The history of experimenting with V-compounds (i.e., vanadium oxides, vanadates, vanadium-based NASICON) in various battery systems, ranging from monovalent-ion to multivalent-ion batteries, stretches back decades. They are fascinating materials that display rich redox chemistry arising from multiple valency and coordination geometries. Over the years, researchers have made use of the inherent ability of vanadium that undergoes metamorphosis between different coordination polyhedra accompanied by transitions in the oxidation state for reversible intercalation/insertion of more than one guest ions without breaking the structure apart. Such infinitely variable properties endow them with a wide range of electronic and crystallographic structures. The former attribute varies from insulators to metallic conductors while the latter feature gives rise to layered structures or 3D open tunnel frameworks that allow facile movement of a wide range of metal cations and guest species along the gallery. Accompanied by a growing stringent requirements for energy storage applications, most V-compounds face difficulty in resolving the problems of their own lack competitiveness mostly due to their intrinsically low ionic/electronic conductivity. The key to producing vanadium-based electrodes with the desired performance characteristics is the ability to fabricate and optimize them consistently to realize certain specifications through effective engineering strategies for property modulation.In this Account, we aim to provide a comprehensive article that correlates the fundamental of charge storage mechanism to crystallographic forms and design principle for V-compounds. More importantly, the essential roles played by engineering strategies in the property modulation of V-compounds are pinpointed to further explain the rationale behind their anomalous behavior. Apart from that, we further summarize the key theoretical and experimental results of some representative examples for tuning of properties. On the other hand, advances in characterization techniques are now sufficiently mature that they can be relied upon to understand the reaction mechanism of V-compounds by tracing real-time transformation and structural changes at the atomic scale during their working state. The mechanistic insights covered in this Account could be used as a fundamental guidance for several key strategies in electrode materials design in terms of dimension, morphology, composition, and architecture that govern the rate and degree of chemical reaction.

Architecting a Stable High-Energy Aqueous Al-Ion Battery.

Aqueous Al-ion batteries (AAIBs) are the subject of great interest due to the inherent safety and high theoretical capacity of aluminum. The high abundancy and easy accessibility of aluminum raw materials further make AAIBs appealing for grid-scale energy storage. However, the passivating oxide film formation and hydrogen side reactions at the aluminum anode as well as limited availability of the cathode lead to low discharge voltage and poor cycling stability. Here, we proposed a new AAIB system consisting of an AlxMnO2 cathode, a zinc substrate-supported Zn-Al alloy anode, and an Al(OTF)3 aqueous electrolyte. Through the in situ electrochemical activation of MnO, the cathode was synthesized to incorporate a two-electron reaction, thus enabling its high theoretical capacity. The anode was realized by a simple deposition process of Al3+ onto Zn foil substrate. The featured alloy interface layer can effectively alleviate the passivation and suppress the dendrite growth, ensuring ultralong-term stable aluminum stripping/plating. The architected cell delivers a record-high discharge voltage plateau near 1.6 V and specific capacity of 460 mAh g-1 for over 80 cycles. This work provides new opportunities for the development of high-performance and low-cost AAIBs for practical applications.

The Synergetic Effect of Lithium Bisoxalatodifluorophosphate and Fluoroethylene Carbonate on Dendrite Suppression for Fast Charging Lithium Metal Batteries.

Fluorinated solid-electrolyte interphase (SEI) derived from fluoroethylene carbonate (FEC) is particularly favored for dendrite suppression in lithium metal batteries because of the high Young's modulus (≈64.9 Gpa) and low electronic conductivity (10-31 S cm-1 ) of LiF. However, the transportation ability of Li+ in this fluorinated SEI under high current densities is limited by the low ionic conductivity of LiF (≈10-12 S cm-1 ). Herein, by rational design, 0.1 m lithium bisoxalatodifluorophosphate (LiDFBOP) is adopted to modify fluorinated SEI in FEC based electrolyte for fast charging lithium metal batteries. Benefiting from the synergetic effect of LiDFBOP and FEC, a fluorinated SEI rich in LiF and Lix POy Fz species can be yielded, which can further improve the stability and ionic conductivity of SEI for fast Li+ transportation. Meanwhile, the average coulombic efficiency for Li plating/stripping is improved from 92.0% to 96.7%, thus promoting stable cycling of Li||Li symmetrical batteries with dendrite free morphologies, even at high current densities (3.0 mA cm-2 ) and high plating/stripping capacities (3.0 mAh cm-2 ). More attractively, in practical Li||LiNi0.6 Co0.2 Mn0.2 O2 batteries, the cycling life at 1C and rate capacities at 6C are also significantly improved. Therefore, the synergetic effect of LiDFBOP and FEC provides great potential for achieving advanced lithium metal batteries with fast charging ability.

A High-Temperature Na-Ion Battery: Boosting the Rate Capability and Cycle Life by Structure Engineering.

High-temperature sodium ion batteries (SIBs) have drawn significant heed recently for large-scale energy storage. Yet, conventional SIBs are in the depths of inferior charge/discharge efficiency and cyclability at elevated temperatures. Rational structure design is highly desirable. Hence, a 3D hierarchical flower architecture self-assembled by carbon-coated Na3 V2 (PO4 )3 (NVP) nanosheets (NVP@C-NS-FL) is fabricated via a microwave-assisted glycerol-mediated hydrothermal reaction combined with a post heat-treatment. The growth mechanism of NVP@C-NS-FL is systematically investigated, by forming a microspherical glycerol/polyglycerol-NVP complex initially and then converting into flower-like architecture during the subsequent annealing at a low temperature ramping rate. Benefiting from the integrated structure, fast Na+ transportation, and highly effective heat transfer, the as-obtained NVP@C-NS-FL exhibits an excellent high-temperature SIB performance, e.g., 65 mAh g-1 (100 C) after 1000 cycles under 60 °C. When coupled with NaTi2 (PO4 )3 anode, the full cell can still display superior power capability of 1.4 kW kg-1 and long-term cyclability (2000 cycles) under 60 °C.

Two-Dimensional Germanium Sulfide Nanosheets as an Ultra-Stable and High Capacity Anode for Lithium Ion Batteries.

Lithium ion batteries (LIBs) at present still suffer from low rate capability and poor cycle life during fast ion insertion/extraction processes. Searching for high-capacity and stable anode materials is still an ongoing challenge. Herein, a facile strategy for the synthesis of ultrathin GeS2 nanosheets with the thickness of 1.1 nm is reported. When used as anodes for LIBs, the two-dimensional (2D) structure can effectively increase the electrode/electrolyte interface area, facilitate the ion transport, and buffer the volume expansion. Benefiting from these merits, the as-synthesized GeS2 nanosheets deliver high specific capacity (1335 mAh g-1 at 0.15 A g-1 ), extraordinary rate performance (337 mAh g-1 at 15 A g-1 ) and stable cycling performance (974 mAh g-1 after 200 cycles at 0.5 A g-1 ). Importantly, our fabricated Li-ion full cells manifest an impressive specific capacity of 577 mAh g-1 after 50 cycles at 0.1 A g-1 and a high energy density of 361 Wh kg-1 at a power density of 346 W kg-1 . Furthermore, the electrochemical reaction mechanism is investigated by the means of ex-situ high-resolution transmission electron microscopy. These results suggest that GeS2 can use to be an alternative anode material and encourage more efforts to develop other high-performance LIBs anodes.

Phosphorus-Doping-Induced Surface Vacancies of 3D Na2 Ti3 O7 Nanowire Arrays Enabling High-Rate and Long-Life Sodium Storage.

Sodium-ion batteries have attracted interest as an alternative to lithium-ion batteries because of the abundance and cost effectiveness of sodium. However, suitable anode materials with high-rate and stable cycling performance are still needed to promote their practical application. Herein, three-dimensional Na2 Ti3 O7 nanowire arrays with enriched surface vacancies endowed by phosphorus doping are reported. As anodes for sodium-ion batteries, they deliver a high specific capacity of 290 mA h g-1 at 0.2 C, good rate capability (50 mA h g-1 at 20 C), and stable cycling capability (98 % capacity retention over 3100 cycles at 20 C). The superior electrochemical performance is attributed to the synergistic effects of the nanowire arrays and phosphorus doping. The rational structure can provide convenient channels to facilitate ion/electron transport and improve the capacitive contributions. Moreover, the phosphorus-doping-induced surface vacancies not only provide more active sites but also improve the intrinsic electrical conductivity of Na2 Ti3 O7 , which will enable electrode materials with excellent sodium storage performance. This work may provide an effective strategy for the synthesis of other anode materials with fast electrochemical reaction kinetics and good sodium storage performance.

Hierarchically porous nanosheets-constructed 3D carbon network for ultrahigh-capacity supercapacitor and battery anode.

An advanced hierarchically porous nanosheets-constructed three-dimensional (3D) carbon material (HPNSC) is prepared by using low-cost agricultural waste-nelumbium seed-pods as the precursor, and potassium hydroxide (KOH) as the activator. The as-prepared HPNSC material has a hierarchically porous nanosheets-constructed structure with 3D carbon nanosheet network morphology, which can enable fast and efficient transfer of Li+/Na+/H+ during charge-discharge process. The assembled HPNSC//HPNSC symmetric supercapacitors exhibit an improved energy density of 41.3 W h kg-1 with a power density of 180 W kg-1 in 1 mol l-1 Na2SO4 electrolyte. The energy density can still be maintained at 16.3 W h kg-1 even if the power density is increased to 9000 W kg-1. When acting as the reversible electrode for lithium ion batteries, this HPNSC material can achieve a high specific capacity of 1246 mA h g-1 at 0.1 A g-1. Moreover, sodium ion battery with HPNSC electrode exhibits excellent cycling performance of 161.8 mA h g-1 maintained even after being cycled 3350 times. The electrochemical performances clearly indicate that the HPNSC developed in this work is a very promising energy storage electrode material, and can further provide new insights for designing and developing highly porous materials for energy storage in other fields.

Nanostructured Li3 V2 (PO4 )3 Cathodes.

To further increase the energy and power densities of lithium-ion batteries (LIBs), monoclinic Li3 V2 (PO4 )3 attracts much attention. However, the intrinsic low electrical conductivity (2.4 × 10-7 S cm-1 ) and sluggish kinetics become major drawbacks that keep Li3 V2 (PO4 )3 away from meeting its full potential in high rate performance. Recently, significant breakthroughs in electrochemical performance (e.g., rate capability and cycling stability) have been achieved by utilizing advanced nanotechnologies. The nanostructured Li3 V2 (PO4 )3 hybrid cathodes not only improve the electrical conductivity, but also provide high electrode/electrolyte contact interfaces, favorable electron and Li+ transport properties, and good accommodation of strain upon Li+ insertion/extraction. In this Review, light is shed on recent developments in the application of 0D (nanoparticles), 1D (nanowires and nanobelts), 2D (nanoplates and nanosheets), and 3D (nanospheres) Li3 V2 (PO4 )3 for high-performance LIBs, especially highlighting their synthetic strategies and promising electrochemical properties. Finally, the future prospects of nanostructured Li3 V2 (PO4 )3 cathodes are discussed.

Component-Customizable Porous Rare-Earth-Based Colloidal Spheres towards Highly Effective Catalysts and Bioimaging Applications.

Multicomponent porous colloidal spheres are of interest because they not only show a combination of the properties associated with all different components, but also usually present synergy effects. However, a combination of different components in a single porous sphere is still greatly challenged due to the different precipitation behaviors of each component. In this work, we have developed a general synthetic route to prepare several categories of porous monodisperse rare-earth (RE)-based colloidal spheres with customizable elemental compositions and a uniform element distribution. The two-step synthetic strategy is based on the integration of coordination chemistry precipitation of RE ions and a subsequent ion-exchange process, which steers clear of obstacles, such as differences in solubility product constant, that are to be found in traditional co-precipitation methods. Our approach provides a new mixing mechanism to realize homogeneous distribution of each element within the porous spheres. An array of binary, ternary, and even senary RE colloidal porous spheres with diameters of 500 nm to 700 nm has been successfully synthesized. Taking advantage of their good dispersibility, porosity, and customizable components, these porous RE oxide spheres show excellent catalytic activity for the reduction of 4-nitrophenol, and promising application in single-phase multifunctional bioprobes.

One-Pot Synthesis of Tunable Crystalline Ni3 S4 @Amorphous MoS2 Core/Shell Nanospheres for High-Performance Supercapacitors.

Transition metal sulfides gain much attention as electrode materials for supercapacitors due to their rich redox chemistry and high electrical conductivity. Designing hierarchical nanostructures is an efficient approach to fully utilize merits of each component. In this work, amorphous MoS(2) is firstly demonstrated to show specific capacitance 1.6 times as that of the crystalline counterpart. Then, crystalline core@amorphous shell (Ni(3)S(4)@MoS(2)) is prepared by a facile one-pot process. The diameter of the core and the thickness of the shell can be independently tuned. Taking advantages of flexible protection of amorphous shell and high capacitance of the conductive core, Ni(3)S(4) @amorphous MoS(2) nanospheres are tested as supercapacitor electrodes, which exhibit high specific capacitance of 1440.9 F g(-1) at 2 A g(-1) and a good capacitance retention of 90.7% after 3000 cycles at 10 A g(-1). This design of crystalline core@amorphous shell architecture may open up new strategies for synthesizing promising electrode materials for supercapacitors.