Multigram Synthesis of Dimethyl Stellane-1,5-Dicarboxylate as a Key Precursor for ortho-Benzene Mimics.

Herein, we present previously unavailable C(sp3 )-rich polycyclic hydrocarbon scaffolds that have the potential to become valuable tools in medicinal chemistry and crop science as saturated bioisosteres of benzenoids. We have developed a scalable protocol (up to 50 g from a single synthetic run) for the synthesis of tricyclo[3.3.0.03,7 ]octane (bisnoradamantane or stellane) 1,5-dicarboxylic acid derivatives. X-ray crystallographic analysis of the stellane 1,5-dicarboxylic acid dimethyl ester has revealed that this scaffold is an optimal saturated isostere for ortho-disubstituted benzene where substituents exhibit in-plane topology. The synthetic protocol is based on the oxidative cyclization of dimethyl octahydropentalene-2,5-dicarboxylate (DMOD) through lithiation followed by I2 oxidation. The reaction outcome is determined by the stereochemistry of the substrate. While the endo,endo cis-DMOD, exclusively gives the "unwanted" Claisen cyclization product, the exo,endo cis- and exo,exo cis- stereoisomers afford the desired stellane 1,5-dicarboxylic acid dimethyl ester quantitatively. DFT computations have revealed that the reaction proceeds via the dianion of dimethyl octahydropentalene-2,5-dicarboxylate, which undergoes SET oxidation by I2 to form a radical anion. The subsequent cyclization followed by a second SET oxidation gives the desired stellane derivative.

Straightforward Synthesis of Halopyridine Aldehydes via Diaminomethylation.

A novel two-step method for formylation of fluoropyridines with silylformamidine Me3 SiC(=NMe)NMe2 (1) under catalyst-free conditions was developed. A series of all possible 18 fluoropyridines featuring one to four fluorine atoms were subjected to the reaction with 1 existing in equilibrium with its carbenic form Me2 NC(:)N(Me)SiMe3 (1'). Among them, 12 fluoropyridines were shown to react via C-H insertion. The reaction proceeded either at ß- or γ-positions affording the corresponding aminals. The more fluorine atoms in pyridines, the easier the reaction proceeded. We also hypothesized that the pyridines in which the fluorine was substituted by other halogens would react in a similar manner. To test the hypothesis, a set of 3,5-disubstituted pyridines with various combination of halogen atoms was prepared. 3,5-Difluoropyridine was taken as a compound for comparison. All the pyridines in the series also reacted likewise. In most cases, hydrolysis of the aminals afforded the corresponding aldehydes. As DFT calculations indicate, the reaction mechanism includes deprotonation of pyridine by 1' as a strong base and the following rearrangement of the formed tight ionic pair to the final product. An alternative reaction pathway involving addition of 1' to the pyridine carbon with the following hydrogen transfer via a three-membered transition state structure required much higher activation energy.

Trifluoromethyl Vinamidinium Salt as a Promising Precursor for Fused ß-Trifluoromethyl Pyridines.

An efficient chlorotrimethylsilane-promoted synthetic protocol for the preparation of functionalized fused ß-trifluoromethyl pyridines by cyclization of electron-rich aminoheterocycles or substituted anilines with a trifluoromethyl vinamidinium salt was developed. The efficient and scalable approach for producing represented trifluoromethyl vinamidinium salt demonstrated huge prospects for further use. The structure specificities of the trifluoromethyl vinamidinium salt and their impact on the reaction progress were determined. The procedure's scope and alternative ways of the reaction were investigated. The possibility of increasing the reaction scale up to 50 g and further modification of obtained products was shown. A minilibrary of potential fragments for 19F NMR-based fragment-based drug discovery (FBDD) was synthesized.

Redox Behavior of Cobalt-Phosphine Complexes vs Their Catalytic Activity in Organozinc Compound Formation: Background for Mechanistic Investigations.

Catalytic activity in arylzinc compound formation was studied for eight Co complexes with phosphines along with their redox properties for implementing the idea of rational design. It was found that Co(XantPhos)Cl2 and Co(N-XantPhos)Cl2 demonstrated distinct reversible CoII/CoI redox processes and acted as efficient catalysts of arylzinc compound formation. Meanwhile, for Co(DPEphos)Cl2, Co(dppf)Cl2, Co(dppb)Cl2, Co(PPh3)2Cl2, and Co(XantPhos)(Piv)2 (the latter one without the addition of LiCl), reversible redox processes were not observed. These catalysts did not act efficiently for the model process of organozinc compound formation. Co4(dppe)5Cl8 was the only exception, explained by a completely different structure (CoP4Cl and CoPCl3) of donor sets instead of CoP2X2 (X = Cl or O). The stability of complexes in tetrahydrofuran (THF) and N,N-dimethylformamide (DMF) solutions was studied by UV-vis spectroscopy. Previously unknown X-ray structures for Co(XantPhos)(Piv)2, Co(N-XantPhos)Cl2, and {Co(DMF)6}{(CoCl3)2(dppb)} were determined. The use of pivalate counterions instead of chloride for Co(XantPhos)2+ led to a significant (ca. 20 times) increase of the kinetic solubility in THF compared to Co(XantPhos)Cl2, preserving high catalytic productivity upon the addition of LiCl. This allowed the latter to be efficiently used in combination with LiCl as the catalyst for arylzinc compound formation on a 2 g scale. The data obtained in this work can be regarded as experimental confirmation of the first and last stages of the plausible reaction pathway of arylzinc compound formation, involving CoII → CoI and CoI → CoII transformations, which could be a significant framework for further mechanistic investigations.

Latent Nucleophilic Carbenes.

Using DFT and ab initio calculations, we demonstrate that noncyclic formamidines can undergo thermal rearrangement into their isomeric aminocarbenes under rather mild conditions. We synthesized the silylformamidine, for which the lowest activation energy in this process was predicted. Experimental studies proved it to serve as a very reactive nucleophilic carbene. The reactions with acetylenes, benzenes, and trifluoromethane proceeded via insertion into sp, sp2, and sp3 CH bonds. The carbene also reacted with the functional groups, such as CHO, COR, and CN at double or triple bonds, displaying high mobility of the trimethylsilyl group. The obtained silylformamidine can be considered as a latent nucleophilic carbene. It can be prepared in bulk quantities, stored, and used when the need arises. Calculation results predict similar behavior for some other silylated formamidines and related compounds.

A stereochemical journey around spirocyclic glutamic acid analogs.

A practical divergent synthetic approach is reported for the library of regio- and stereoisomers of glutamic acid analogs built on the spiro[3.3]heptane scaffold. Formation of the spirocyclic scaffold was achieved starting from a common precursor - an O-silylated 2-(hydroxymethyl)cyclobutanone derivative. Its olefination required using the titanium-based Tebbe protocol since the standard Wittig reaction did not work with this particular substrate. The construction of the second cyclobutane ring of the spirocyclic system was achieved through either subsequent dichloroketene addition or Meinwald oxirane rearrangement as the key synthetic steps, depending on the substitution patterns in the target compounds (1,6- or 1,5-, respectively). Further modified Strecker reaction of the resulting racemic spirocyclic ketones with the Ellman's sulfinamide as a chiral auxiliary had low to moderate diastereoselectivity; nevertheless, all stereoisomers were isolated in pure form via chromatographic separation, and their absolute configuration was confirmed by X-ray crystallography. Members of the library were tested for the inhibitory activity against H. pylori glutamate racemase.

Synthesis and separation of diastereomeric N-(1-phenylethyl)amides of inherently chiral hydroxydibenzoyloxy-calix[4]arene acetic acids.

A preparative method for the synthesis of optically pure N-(1-phenylethyl)amides of inherently chiral (cR)- and (cS)-dibenzoyloxy-calix[4]arene acetic acids has been developed. Their absolute stereochemical configuration was determined by X-ray diffraction analysis.

Selective α-Methylation of Ketones.

The convenient and scalable preparative approach for the two-step α-methylation of ketones is described. The optimized protocols for regioselective preparation of enaminones with further diastereoselective and functional groups tolerant hydrogenation to α-methylketones are developed. The scope and limitations of the proposed methodology are discussed. The advantages compared to known procedures are demonstrated. The unexpected role of acetone in the hydrogenation is suggested. The evaluation of the method for both early building block synthesis and late-stage CH-functionalization is shown. The elaborate procedures' preparability and scalability are demonstrated by the synthesis of several α-methyl ketones up to 100 g amount.

Bicyclic Pyrrolidines for Medicinal Chemistry via [3 + 2]-Cycloaddition.

A general approach to bicyclic fused pyrrolidines via [3 + 2]-cycloaddition between nonstabilized azomethyne ylide and endocyclic electron-deficient alkenes was elaborated. "Push-pull" alkenes and CF3-alkenes did not react with the azomethyne ylide under the previously reported conditions, and we developed a superior protocol (LiF, 140 °C, no solvent). Among obtained products were medchem-relevant bicyclic sulfones, monofluoro-, difluoro-, and trifluoromethyl-substituted pyrrolidines. This approach not only allowed preparation of novel molecules but also significantly simplified synthesis of the existing ones (e.g., sofinicline).

Third Generation Buchwald Precatalysts with XPhos and RuPhos: Multigram Scale Synthesis, Solvent-Dependent Isomerization of XPhos Pd G3 and Quality Control by 1H- and 31P-NMR Spectroscopy.

The third generation Buchwald precatalysts Pd(ABP)(Phos)(OMs) (also known as Phos Pd G3)) with XPhos and RuPhos were prepared in multigram scale by a modified procedure (ABP = fragment of C-deprotonated 2-aminobiphenyl, XPhos = 2-dicyclohexylphosphino-2',4',6'-triisopropylbiphenyl, RuPhos = 2-dicyclohexylphosphino-2',6'-diisopropoxybiphenyl, OMs- = CH3SO3-). The 1H- and 31P-NMR spectra of the title complexes and some impurities, measured by various 1D and 2D techniques, were analyzed in detail. The solvent-dependent isomerization of Pd(ABP)(XPhos)(OMs) was studied by NMR, and the X-ray structures of two isomers were determined. The impurities in precatalysts, such as Pd(ABP)(HABP)(OMs) (HABP-neutral 2-aminobiphenyl coordinated to Pd2+ in N-monodentate mode) and PdCl2(XPhos)2, were identified and characterized by single crystal X-ray diffraction. A simple method for the quick quality control (QC) of the precatalysts, suitable for routine use, was proposed. The method was based on the assessment of the impurity content on the basis of the 1H-NMR spectra analysis.

The PIFA-initiated oxidative cyclization of 2-(3-butenyl)quinazolin-4(3H)-ones - an efficient approach to 1-(hydroxymethyl)-2,3-dihydropyrrolo[1,2-a]quinazolin-5(1H)-ones.

A regioselective method for the synthesis of 1-(hydroxymethyl)-2,3-dihydropyrrolo[1,2-a]quinazolin-5(1H)-ones - close structural analogs of naturally occurring vasicinone alkaloids - is described. The procedure is based on PIFA-initiated oxidative 5-exo-trig cyclization of 2-(3-butenyl)quinazolin-4(3Н)-ones, in turn prepared by thermal cyclocondensation of the corresponding 2-(pent-4-enamido)benzamides. The products obtained have a good natural product likeness (NPL) score and therefore can be useful for the design of natural product-like compound libraries.

A conformationally restricted GABA analogue based on octahydro-1H-cyclopenta[b]pyridine scaffold.

An approach to rel-(4aS,6R,7aR)-octahydro-1H-cyclopenta[b]pyridine-6-carboxylic acid-a bicyclic conformationally restricted γ-aminobutyric acid (GABA) analogue was developed. The eight-step sequence relied on the reaction of 2,3-bis(chloromethyl)pyridine and a C1-binucleophile and the catalytic reduction of the pyridine ring as the key steps and allowed for the preparation of the title compound in 9.0% overall yield. Assessment of the octahydro-1H-cyclopenta[b]pyridine scaffold geometry showed that this template can be considered truly three-dimensional.

On the Border between Low-Nuclearity and One-Dimensional Solids: A Unique Interplay of 1,2,4-Triazolyl-Based {CuII5(OH)2} Clusters and MoVI-Oxide Matrix.

A pentanuclear CuII5-hydroxo cluster possessing an unusual linear-shaped configuration was formed and crystallized under hydrothermal conditions as a result of the unique cooperation of bridging 1,2,4-triazole ligand ( trans-1,4-cyclohexanediyl-4,4'-bi(1,2,4-triazole) ( tr2 cy)), MoVI-oxide, and CuSO4. This structural motif can be rationalized by assuming in situ generation of {Cu2Mo6O22}4- anions, which represent heteroleptic derivatives of γ-type [Mo8O26]4- further interlinked by [Cu3(OH)2]4+ cations through [ N- N] bridges. The framework structure of the resulting compound [Cu5(OH)2( tr2 cy)2Mo6O22]·6H2O (1) is thus built up from neutral heterometallic {Cu5(OH)2Mo6O22} n layers pillared with tetradentate tr2 cy. Quantum-chemical calculations demonstrate that the exclusive site of the parent γ-[Mo8O26]4- cluster into which CuII inserts corresponds with the site that has the lowest defect ("MoO2 vacancy") formation energy, demonstrating how the local metal-polyoxomolybdate chemistry can express itself in the final crystal structure. Magnetic susceptibility measurements of 1 show strong antiferromagnetic coupling within the Cu5 chain with exchange parameters J1 = -500(40) K (-348(28) cm-1), J2 = -350(10) K (-243(7) cm-1) and g = 2.32(2), χ2 = 6.5 × 10-4. Periodic quantum-chemical calculations reproduce the antiferromagnetic character of 1 and connect it with an effective ligand-mediated spin coupling mechanism that comes about from the favorable structural arrangement between the Cu centers and the OH-, O2-, and tr2 cy bridging ligands.

Exploration of a Variety of Copper Molybdate Coordination Hybrids Based on a Flexible Bis(1,2,4-triazole) Ligand: A Look through the Composition-Space Diagram.

We investigated the coordination ability of the bis(1,2,4-triazolyl) module, tr2pr = 1,3-bis(1,2,4-triazol-4-yl)propane, toward the engineering of solid-state structures of copper polyoxomolybdates utilizing a composition space diagram approach. Different binding modes of the ligand including [N-N]-bridging and N-terminal coordination and the existence of favorable conformation forms (anti/anti, gauche/anti, and gauche/gauche) resulted in varieties of mixed metal CuI/MoVI and CuII/MoVI coordination polymers prepared under hydrothermal conditions. The composition space analysis employed was aimed at both the development of new coordination solids and their crystallization fields through systematic changes of the reagent ratios [copper(II) and molybdenum(VI) oxide precursors and the tr2pr ligand]. Nine coordination compounds were synthesized and structurally characterized. The diverse coordination architectures of the compounds are composed of cationic fragments such as [CuII3(µ2-OH)2(µ2-tr)2]4+, [CuII3(µ2-tr)6]6+, [CuII2(µ2-tr)3]4+, etc., connected to polymeric arrays by anionic species (molybdate MoO42-, isomeric α-, δ-, and ß-octamolybdates {Mo8O26}4- or {Mo8O28H2}6-). The inorganic copper(I,II)/molybdenum(VI) oxide matrix itself forms discrete or low-dimensional subtopological motifs (0D, 1D, or 2D), while the organic spacers interconnect them into higher-dimensional networks. The 3D coordination hybrids show moderate thermal stability up to 230-250 °C, while for the 2D compounds, the stability of the framework is distinctly lower (∼190 °C). The magnetic properties of the most representative samples were investigated. The magnetic interactions were rationalized in terms of analyzing the planes of the magnetic orbitals.

Composition Space Analysis in the Development of Copper Molybdate Hybrids Decorated by a Bifunctional Pyrazolyl/1,2,4-Triazole Ligand.

A bitopic ligand, 4-(3,5-dimethylpyrazol-4-yl)-1,2,4-triazole (Hpz-tr) (1), containing two different heterocyclic moieties was employed for the design of copper(II)-molybdate solids under hydrothermal conditions. In the multicomponent Cu(II)/Hpz-tr/Mo(VI) system, a diverse set of coordination hybrids, [Cu(Hpz-tr)2SO4]·3H2O (2), [Cu(Hpz-tr)Mo3O10] (3), [Cu4(OH)4(Hpz-tr)4Mo8O26]·6H2O (4), [Cu(Hpz-tr)2Mo4O13] (5), and [Mo2O6(Hpz-tr)]·H2O (6), was prepared and characterized. A systematic investigation of these systems in the form of a ternary crystallization diagram approach was utilized to show the influence of the molar ratios of starting reagents, the metal (Cu(II) and Mo(VI)) sources, the temperature, etc., on the reaction products outcome. Complexes 2-4 dominate throughout a wide crystallization range of the composition triangle, while the other two compounds 5 and 6 crystallize as minor phases in a narrow concentration range. In the crystal structures of 2-6, the organic ligand behaves as a short [N-N]-triazole linker between metal centers Cu···Cu in 2-4, Cu···Mo in 5, and Mo···Mo in 6, while the pyrazolyl function remains uncoordinated. This is the reason for the exceptional formation of low-dimensional coordination motifs: 1D for 2, 4, and 6 and 2D for 3 and 5. In all cases, the pyrazolyl group is involved in H bonding (H-donor/H-acceptor) and is responsible for π-π stacking, thus connecting the chain and layer structures in more complicated H-bonding architectures. These compounds possess moderate thermal stability up to 250-300 °C. The magnetic measurements were performed for 2-4, revealing in all three cases antiferromagnetic exchange interactions between neighboring Cu(II) centers and long-range order with a net moment below Tc of 13 K for compound 4.

1,2,4-Triazolyl-carboxylate-based MOFs incorporating triangular Cu(II)-hydroxo clusters: topological metamorphosis and magnetism.

Bifunctional 1,2,4-triazole-carboxylate ligands, an achiral 1,2,4-triazol-4-yl-acetic acid (trgly-H) and a chiral (d)-2-(1,2,4-triazol-4-yl)-propionic acid (d-trala-H), derived from the corresponding α-amino acid precursors revealed unique binding abilities in the construction of Cu(II)-coordination polymers composing discrete triangular [Cu3(µ3-OH)] clusters. A related series of MOFs, [Cu3(µ3-OH)(trgly)3(SO4)]·2H2O (1a), [Cu3(µ3-OH)(trgly)3(H2O)3]SO4·16H2O (1b), Cu3(µ3-OH)(d-trala)3(ClO4)0.5](ClO4)1.5·1.5H2O (2), was prepared, and their crystal structures were determined by means of X-ray diffraction. Being singly deprotonated, the organic ligands act as multidentate µ3- or µ4-donors using tr and -COO(-) moieties. The generated [Cu3(µ3-OH)(tr)3] cluster core is primarily supported by three [-N-N-] triazole heterocycles in a basal plane and tripodal-assisted µ3-anions (SO4(2-): 1a; ClO4(-): 2) capping the axial faces. The carboxylate groups join the units into either two-dimensional (2D) layer (1a, 2) or 3D zeolite-like networks (1b). Compound 1b represents the topology of α-Po (pcu: 4(12).6(3)) and crystallizes in the noncentrosymmetric space group I4̅3m, in which the six-connected [Cu3(µ3-OH)] clusters and trgly self-assemble in an open-channel cubic array possessing ∼56% solvent-accessible volume. Upon slight thermal treatment (∼60 °C), the structure irreversibly shrinks to the nonporous 2D motif 1a that belongs to a uninodal (3,6) network type. In structure 2 (space group R32), due to the [-N-N-] triazole and 1,3-bidentate carboxylate binding mode, each organic ligand bridges three metal clusters affording cross-linking of two adjacent layers with the same (3,6) topology. The resultant 3,9-c net is novel and can be categorized as two-nodal with point symbol {4(18).6(18)}{4(2).6}3. Spin frustration and antisymmetric exchange effects, resulting in abnormally low g values in the S = 1/2 states, were observed in the magnetic properties and the EPR spectra.

Triazolyl-based copper-molybdate hybrids: from composition space diagram to magnetism and catalytic performance.

The multicomponent mixed-metal Cu(II)/Mo(VI) oxides/1,3-bis(1,2,4-triazol-4-yl)adamantane (tr2ad) system was thoroughly studied employing a compositional diagram approach. The concept allowed us to prepare three layered copper-molybdate hybrid solids [Cu(II)2(tr2ad)4](Mo8O26) (1), [Cu4(II)(µ4-O)(tr2ad)2(MoO4)3]·7.5H2O (2), and [Cu(I)2(tr2ad)2](Mo2O7)·H2O (3), and to elucidate the relationship between initial reagent concentration/stoichiometry and the stability of the resultant structural motifs. Compounds 1 and 2 were found to dominate throughout a wide crystallization range of the concentration triangle, whereas compound 3 was formed by redox processes in the narrow crystallization area having a high excess of Cu(OAc)2·H2O. Independent experiments carried out with Cu(OAc)2 and (NH4)6Mo7O24 in the absence of tr2ad, under the same conditions, revealed the formation of low-valent and bimetallic oxides, including Cu2O, MoO2, Cu(Mo3O10)·H2O, and Cu3(MoO4)2(OH)2. Compounds 1 and 2 show high thermal and chemical stability as examined as catalysts in the epoxidation of cis-cyclooctene and the oxidation of benzyl alcohol (BzOH) with different types of oxidants. The oxidation reaction of BzOH using tert-butyl hydroperoxide (TBHP) as the oxidant, in the presence of 1 or 2, led to benzaldehyde and benzoic acid (PhCO2H), with the latter being formed in up to 90% yield at 24 h. The results suggest that 1 and 2 may be favorable heterogeneous catalysts for the synthesis of PhCO2H. Whereas compound 1 only reveals a weak ferromagnetic coupling between neighboring Cu(II) centers (J = 0.41 cm(-1)), compound 2 shows distinct intracluster antiferromagnetic exchange interactions (J = -29.9 cm(-1), J' = -25.7 cm(-1)), which consequently results in a diamagnetic ground state.

Attractive and repulsive forces in a crystal of [Rb(18-crown-6)][SbCl6] under high pressure.

The compression behavior of [Rb(18-crown-6)][SbCl6] crystal under pressure up to 2.16 (3) GPa was investigated in a diamond anvil cell (DAC) using a mixture of pentane-isopentane (1:4) as the pressure-transmitting fluid. The compound crystallizes in trigonal space group R3 and no phase transition was observed in the indicated pressure range. The low value of pressure bulk modulus [9.1 (5) GPa] found in this crystal is a characteristic of soft materials with predominant dispersive and electrostatic interaction forces. The nonlinear relationship between unit-cell parameters under high pressure is attributed to the influence of reduced intermolecular H...Cl contacts under pressure over 0.73 GPa. It also explains the high compression efficiency of [Rb(18-crown-6)][SbCl6] crystals at relatively low pressures, resulting in a significant shift of the Rb atom to the center of the crown ether cavity. At pressures above 0.9 GPa, steric repulsion forces begin to play a remarkable role, since an increasing number of interatomic H...Cl and H...H contacts become shorter than the sum of their van der Waals (vdW) radii. Below 0.9 GPa, both unit-cell parameter dependences (P-a and P-c) exhibit hysteresis upon pressure release, demonstrating their influence on the disordered model of Rb atoms. The void reduction under pressure also demonstrates two linear sections with the inflection point at 0.9 GPa. Compression of the crystal is accompanied by a significant decrease in the volume of the voids, leading to the rapid approach of Rb atoms to the center of the crown ether cavity. For the Rb atom to penetrate into the center of the crown ether cavity in [Rb(18-crown-6)][SbCl6], it is necessary to apply a pressure of about 2.5 GPa to disrupt the balance of atomic forces in the crystal. This sample serves as a compression model demonstrating the influence of both attractive and repulsive forces on the change in unit-cell parameters under pressure.

Functionalized adamantane tectons used in the design of mixed-ligand copper(II) 1,2,4-triazolyl/carboxylate metal-organic frameworks.

Bistriazoles, 1,3-bis(1,2,4-triazol-4-yl)propane (tr(2)pr) and 1,3-bis(1,2,4-triazol-4-yl)adamantane (tr(2)ad), were examined in combination with the rigid tetratopic 1,3,5,7-adamantanetetracarboxylic acid (H(4)-adtc) platform for the construction of neutral heteroleptic copper(II) metal-organic frameworks. Two coordination polymers, [{Cu(4)(OH)(2)(H(2)O)(2)}{Cu(4)(OH)(2)}(tr(2)pr)(2)(H-adtc)(4)]·2H(2)O (1) and [Cu(4)(OH)(2)(tr(2)ad)(2)(H-adtc)(2)(H(2)O)(2)]·3H(2)O (2), were synthesized and structurally characterized. In complexes 1 and 2, the N(1),N(2)-1,2,4-triazolyl (tr) and µ(3)-OH(-) groups serve as complementary bridges between adjacent metal centers supporting the tetranuclear dihydroxo clusters. The structure of 1 represents a unique association of two different kinds of centrosymmetrical {Cu(4)(OH)(2)} units in a tight 3D framework, while in compound 2, another configuration type of acentric tetranuclear metal clusters is organized in a layered 3,6-hexagonal motif. In both cases, the {Cu(4)(OH)(2)} secondary building block and trideprotonated carboxylate H-adtc(3-) can be viewed as covalently bound six- and three-connected nodes that define the net topology. The tr ligands, showing µ(3)- or µ(4)-binding patterns, introduce additional integrating links between the neighboring {Cu(4)(OH)(2)} fragments. A variable-temperature magnetic susceptibility study of 2 demonstrates strong antiferromagnetic intracluster coupling (J(1) = -109 cm(-1) and J(2) = -21 cm(-1)), which combines for the bulk phase with a weak antiferromagnetic intercluster interaction (zj = -2.5 cm(-1)).

Unprecedented trapping of difluorooctamolybdate anions within an α-polonium type coordination network.

New fluorinated hybrid solids [Mo2F2O5(tr2pr)] (1), [Co3(tr2pr)2(MoO4)2F2]·7H2O (2), and [Co3(H2O)2(tr2pr)3(Mo8O26F2)]·3H2O (3) (tr2pr = 1,3-bis(1,2,4-triazol-4-yl)propane) were prepared from the reaction systems consisting of Co(OAc)2/CoF2 and MoO3/(NH4)6Mo7O24, as Co(II) and Mo(VI) sources, in water (2) or in aqueous HF (1, 3) employing mild hydrothermal conditions. The tr2pr ligand serves as a conformationally flexible tetradentate donor. In complex 1, the octahedrally coordinated Mo atoms are linked in the discrete corner-sharing {Mo2(µ2-O)F2O4N4} unit in which a pair of tr-heterocycles (tr = 1,2,4-triazole) is arranged in cis-positions opposite to "molybdenyl" oxygen atoms. The anti-anti conformation type of tr2pr facilitates the tight zigzag chain packing motif. The crystal structure of the mixed-anion complex salt 2 consists of trinuclear [Co3(µ3-MoO4)2(µ2-F)2] units self-assembling in Co(II)-undulating chains (Co···Co 3.0709(15) and 3.3596(7) Å), which are cross-linked by tr2pr in layers. In 3, containing condensed oxyfluoromolybdate species, linear centrosymmetric [Co3(µ2-tr)6](6+) SBUs are organized at distances of 10.72-12.45 Å in an α-Po-like network using bitopic tr-linkers. The octahedral {N6} and {N3O3} environments of the central and peripheral cobalt atoms, respectively, are filled by triazole N atoms, water molecules, and coordinating [Mo8O26F2](6-) anions. Acting as a tetradentate O-donor, each difluorooctamolybdate anion anchors four [Co3(µ2-tr)6](6+) units through their peripheral Co-sites, which consequently leads to a novel type of a two-nodal 4,10-c net with the Schläfli symbol {3(2).4(3).5}{3(4).4(20).5(16).6(5)}. The 2D and 3D coordination networks of 2 and 3, respectively, are characterized by significant overall antiferromagnetic exchange interactions (J/k) between the Co(II) spin centers on the order of -8 and -4 K. The [Mo8O26F2](6-) anion is investigated in detail by quantum chemical calculations.