Logic circuits based on individual semiconducting and metallic carbon-nanotube devices.

Nanoscale transistors employing an individual semiconducting carbon nanotube as the channel hold great potential for logic circuits with large integration densities that can be manufactured on glass or plastic substrates. Carbon nanotubes are usually produced as a mixture of semiconducting and metallic nanotubes. Since only semiconducting nanotubes yield transistors, the metallic nanotubes are typically not utilized. However, integrated circuits often require not only transistors, but also resistive load devices. Here we show that many of the metallic carbon nanotubes that are deposited on the substrate along with the semiconducting nanotubes can be conveniently utilized as load resistors with favorable characteristics for the design of integrated circuits. We also demonstrate the fabrication of arrays of transistors and resistors, each based on an individual semiconducting or metallic carbon nanotube, and their integration on glass substrates into logic circuits with switching frequencies of up to 500 kHz using a custom-designed metal interconnect layer.

High-performance ZnO nanowire transistors with aluminum top-gate electrodes and naturally formed hybrid self-assembled monolayer/AlO(x) gate dielectric.

A method for the formation of a low-temperature hybrid gate dielectric for high-performance, top-gate ZnO nanowire transistors is reported. The hybrid gate dielectric consists of a self-assembled monolayer (SAM) and an aluminum oxide layer. The thin aluminum oxide layer forms naturally and spontaneously when the aluminum gate electrode is deposited by thermal evaporation onto the SAM-covered ZnO nanowire, and its formation is facilitated by the poor surface wetting of the aluminum on the hydrophobic SAM. The hybrid gate dielectric shows excellent electrical insulation and can sustain voltages up to 6 V. ZnO nanowire transistors utilizing the hybrid gate dielectric feature a large transconductance of 50 µS and large on-state currents of up to 200 µA at gate-source voltages of 3 V. The large on-state current is sufficient to drive organic light-emitting diodes with an active area of 6.7 mm(2) to a brightness of 445 cd/m(2). Inverters based on ZnO nanowire transistors and thin-film carbon load resistors operate with frequencies up to 30 MHz.

Unipolar sequential circuits based on individual-carbon-nanotube transistors and thin-film carbon resistors.

A fabrication process for the monolithic integration of field-effect transistors based on individual carbon nanotubes and load resistors based on vacuum-evaporated carbon films into fast unipolar logic circuits on glass substrates is reported for the first time. The individual-carbon-nanotube transistors operate with relatively small gate-source and drain-source voltages of 1 V and combine large transconductance (up to 6 µS), large ON/OFF ratio (>10(4)), and short switching delay time constants (12 ns). The thin-film carbon load resistors provide linear current-voltage characteristics and resistances between 300 kΩ and 100 MΩ, depending on the layout of the resistors and the thickness of the vacuum-evaporated carbon films. Various combinational circuits (NAND, NOR, AND, OR gates) as well as a sequential circuit ( ̅S ̅R NAND latch) have been fabricated and characterized. Although these unipolar circuits cannot compete with optimized complementary circuits in terms of integration density and static power consumption, they offer the possibility of realizing air-stable, low-voltage integrated circuits with promising static and dynamic performance on unconventional substrates for large-area electronics applications, such as displays or sensors.