Accelerated Transfer and Spillover of Carbon Monoxide through Tandem Catalysis for Kinetics-boosted Ethylene Electrosynthesis.

Cu-based catalysts have been widely applied in electroreduction of carbon dioxide (CO2 ER) to produce multicarbon (C2+ ) feedstocks (e.g., C2 H4 ). However, the high energy barriers for CO2 activation on the Cu surface is a challenge for a high catalytic efficiency and product selectivity. Herein, we developed an in situ *CO generation and spillover strategy by engineering single Ni atoms on a pyridinic N-enriched carbon support with a sodalite (SOD) topology (Ni-SOD/NC) that acted as a donor to feed adjacent Cu nanoparticles (NPs) with *CO intermediate. As a result, a high C2 H4 selectivity of 62.5 % and an industrial-level current density of 160 mA cm-2 at a low potential of -0.72 V were achieved. Our studies revealed that the isolated NiN3 active sites with adjacent pyridinic N species facilitated the *CO desorption and the massive *CO intermediate released from Ni-SOD/NC then overflowed to Cu NPs surface to enrich the *CO coverage for improving the selectivity of CO2 ER to C2 H4 .

Single-atom Iron Catalyst with Biomimetic Active Center to Accelerate Proton Spillover for Medical-level Electrosynthesis of H2 O2 Disinfectant.

Electrosynthesis of H2 O2 has great potential for directly converting O2 into disinfectant, yet it is still a big challenge to develop effective electrocatalysts for medical-level H2 O2 production. Herein, we report the design and fabrication of electrocatalysts with biomimetic active centers, consisting of single atomic iron asymmetrically coordinated with both nitrogen and sulfur, dispersed on hierarchically porous carbon (FeSA -NS/C). The newly-developed FeSA -NS/C catalyst exhibited a high catalytic activity and selectivity for oxygen reduction to produce H2 O2 at a high current of 100 mA cm-2 with a record high H2 O2 selectivity of 90 %. An accumulated H2 O2 concentration of 5.8 wt.% is obtained for the electrocatalysis process, which is sufficient for medical disinfection. Combined theoretical calculations and experimental characterizations verified the rationally-designed catalytic active center with the atomic Fe site stabilized by three-coordinated nitrogen atoms and one-sulfur atom (Fe-N3 S-C). It was further found that the replacement of one N atom with S atom in the classical Fe-N4 -C active center could induce an asymmetric charge distribution over N atoms surrounding the Fe reactive center to accelerate proton spillover for a rapid formation of the OOH* intermediate, thus speeding up the whole reaction kinetics of oxygen reduction for H2 O2 electrosynthesis.

Dimensional Control of Octahedral Tilt in SrRuO3 via Infinite-Layered Oxides.

Manipulation of octahedral distortion at atomic scale is an effective means to tune the ground states of functional oxides. Previous work demonstrates that strain and film thickness are variable parameters to modify the octahedral parameters. However, selective control of bonding geometry by structural propagation from adjacent layers is rarely studied. Here we propose a new route to tune the ferromagnetism in SrRuO3 (SRO) ultrathin layers by oxygen coordination of adjacent SrCuO2 (SCO) layers. The infinite-layered CuO2 exhibits a structural transformation from "planar-type" to "chain-type" with reduced film thickness. Two orientations dramatically modify the polyhedral connectivity at the interface, thus altering the octahedral distortion of SRO. The local structural variation changes the spin state of Ru and orbital hybridization strength, leading to a significant change in the magnetoresistance and anomalous Hall resistivity. These findings could launch investigations into adaptive control of functionalities in quantum oxide heterostructures using oxygen coordination.

Promoting CO2 Electroreduction Kinetics on Atomically Dispersed Monovalent ZnI Sites by Rationally Engineering Proton-Feeding Centers.

Electrocatalytic reduction of CO2 (CO2 RR) to value-added chemicals is of great significance for CO2 utilization, however the CO2 RR process involving multi-electron and proton transfer is greatly limited by poor selectivity and low yield. Herein, We have developed an atomically dispersed monovalent zinc catalyst anchored on nitrogenated carbon nanosheets (Zn/NC NSs). Benefiting from the unique coordination environment and atomic dispersion, the Zn/NC NSs exhibit a superior CO2 RR performance, featuring a high current density up to 50 mA cm-2 with an outstanding CO Faradaic efficiency of ≈95 %. The center ZnI atom coordinated with three N atoms and one N atom that bridges over two adjacent graphitic edges (Zn-N3+1 ) is identified as the catalytically active site. Experimental results reveal that the twisted Zn-N3+1 structure accelerates CO2 activation and protonation in the rate-determining step of *CO2 to *COOH, while theoretical calculations elucidate that atomically dispersed Zn-N3+1 moieties decrease the potential barriers for intermediate COOH* formation, promoting the proton-coupled CO2 RR kinetics and boosting the overall catalytic performance.

Magnetically enhanced thermoelectrics: a comprehensive review.

Thermoelectric (TE) materials have great potential for waste-energyrecycling and solid-state cooling. Their conversion efficiency has attracted huge attention to the development of TE devices, and largely depends on the thermal and electrical transport properties. Magnetically enhanced thermoelectrics open up the possibility of making thermoelectricity a future leader in sustainable energy development and offer an intriguing platform for both fundamental physics and prospective applications. In this review, state-of-the-art TE materials are summarized from the magnetism point of view, via diagrams of the charges, lattices, orbits and spin degrees of freedom. Our fundamental knowledge of magnetically induced TE effects is discussed. The underlying thermo-electro-magnetic merits are discussed in terms of superparamagnetism- and magnetic-transition-enhanced electron scattering, field-dependent magnetoelectric coupling, and the magnon- and phonon-drag Seebeck effects. After these topics, we finally review several thermal-electronic and spin current-induced TE materials, highlight future possible strategies for further improvingZT, and also give a brief outline of ongoing research challenges and open questions in this nascent field.

Proton Capture Strategy for Enhancing Electrochemical CO2 Reduction on Atomically Dispersed Metal-Nitrogen Active Sites*.

Electrocatalysts play a key role in accelerating the sluggish electrochemical CO2 reduction (ECR) involving multi-electron and proton transfer. We now develop a proton capture strategy by accelerating the water dissociation reaction catalyzed by transition-metal nanoparticles (NPs) adjacent to atomically dispersed and nitrogen-coordinated single nickel (Ni-Nx ) active sites to accelerate proton transfer to the latter for boosting the intermediate protonation step, and thus the whole ECR process. Aberration-corrected scanning transmission electron microscopy, X-ray absorption spectroscopy, and calculations reveal that the Ni NPs accelerate the adsorbed H (Had ) generation and transfer to the adjacent Ni-Nx sites for boosting the intermediate protonation and the overall ECR processes. This proton capture strategy is universal to design and prepare for various high-performance catalysts for diverse electrochemical reactions even beyond ECR.

Dynamic Activation of Adsorbed Intermediates via Axial Traction for the Promoted Electrochemical CO2 Reduction.

Regulating the local environment and structure of metal center coordinated by nitrogen ligands (M-N4 ) to accelerate overall reaction dynamics of the electrochemical CO2 reduction reaction (CO2 RR) has attracted extensive attention. Herein, we develop an axial traction strategy to optimize the electronic structure of the M-N4 moiety and construct atomically dispersed nickel sites coordinated with four nitrogen atoms and one axial oxygen atom, which are embedded within the carbon matrix (Ni-N4 -O/C). The Ni-N4 -O/C electrocatalyst exhibited excellent CO2 RR performance with a maximum CO Faradic efficiency (FE) close to 100 % at -0.9 V. The CO FE could be maintained above 90 % in a wide range of potential window from -0.5 to -1.1 V. The superior CO2 RR activity is due to the Ni-N4 -O active moiety composed of a Ni-N4 site with an additional oxygen atom that induces an axial traction effect.

Super Charge Separation and High Voltage Phase in Na x MnO2.

Na x MnO2 shows Mn3+ and Mn4+ charge separation with the charge stripe ordering upon Na deintercalation at x = 5/8. In this paper it is shown that, surprisingly, at lower Na compositions of 5/8 > x ≥ 1/18 the phase evolution pathway of Na x MnO2 upon Na deintercalation shows a unique phenomenon of super charge separation, where the Mn3+ and Mn4+ ions fully charge-separate into charge superplanes formed by succession of charge stripes in the third dimension. The Mn3+ superplanes attract Na ions electronically, and dominate the antiferromagnetic interactions in NaMnO2. Na ions in Mn3+ superplanes also naturally pillar the MnO2 layers to form the unusual O1 phases with large interlayer distances at x < 1/3, which dominates the unique electrochemical behavior of NaMnO2.

Facet-Dependent Deposition of Highly Strained Alloyed Shells on Intermetallic Nanoparticles for Enhanced Electrocatalysis.

Surface strains can enhance the performance of platinum-based core@shell electrocatalysts for the oxygen reduction reaction (ORR). Bimetallic core@shell nanoparticles (NPs) are widely studied nanocatalysts but often have limited lattice mismatch and surface compositions; investigations of core@shell NPs with greater compositional complexity and lattice misfit are in their infancy. Here, a new class of multimetallic NPs composed of intermetallic cores and random alloy shells is reported. Specifically, face-centered cubic Pt-Cu random alloy shells were deposited on PdCu B2 intermetallic seeds in a facet-dependent manner, giving rise to faceted core@shell NPs with highly strained surfaces. High-resolution transmission electron microscopy revealed orientation-dependent surface strains, where the compressive strains were greater on Pt-Cu {200} than {111} facets. These core@shell NPs provide higher specific area and mass activities for the ORR when compared to conventional Pt-Cu NPs. Moreover, these intermetallic@random alloy NPs displayed high endurance, undergoing 10,000 cycles with only a slight decay in activity and no apparent structural changes.

Anisotropic Etching of Hexagonal Boron Nitride and Graphene: Question of Edge Terminations.

Chemical vapor deposition (CVD) has been established as the most effective way to grow large area two-dimensional materials. Direct study of the etching process can reveal subtleties of this competing with the growth reaction and thus provide the necessary details of the overall growth mechanism. Here we investigate hydrogen-induced etching of hBN and graphene and compare the results with the classical kinetic Wulff construction model. Formation of the anisotropically etched holes in the center of hBN and graphene single crystals was observed along with the changes in the crystals' circumference. We show that the edges of triangular holes in hBN crystals formed at regular etching conditions are parallel to B-terminated zigzags, opposite to the N-terminated zigzag edges of hBN triangular crystals. The morphology of the etched hBN holes is affected by a disbalance of the B/N ratio upon etching and can be shifted toward the anticipated from the Wulff model N-terminated zigzag by etching in a nitrogen buffer gas instead of a typical argon. For graphene, etched hexagonal holes are terminated by zigzag, while the crystal circumference is gradually changing from a pure zigzag to a slanted angle resulting in dodecagons.

A Discovery of Strong Metal-Support Bonding in Nanoengineered Au-Fe3O4 Dumbbell-like Nanoparticles by in Situ Transmission Electron Microscopy.

The strength of metal-support bonding in heterogeneous catalysts determines their thermal stability, therefore, a tremendous amount of effort has been expended to understand metal-support interactions. Herein, we report the discovery of an anomalous "strong metal-support bonding" between gold nanoparticles and "nano-engineered" Fe3O4 substrates by in situ microscopy. During in situ vacuum annealing of Au-Fe3O4 dumbbell-like nanoparticles, synthesized by the epitaxial growth of nano-Fe3O4 on Au nanoparticles, the gold nanoparticles transform into the gold thin films and wet the surface of nano-Fe3O4, as the surface reduction of nano-Fe3O4 proceeds. This phenomenon results from a unique coupling of the size-and shape-dependent high surface reducibility of nano-Fe3O4 and the extremely strong adhesion between Au and the reduced Fe3O4. This strong metal-support bonding reveals the significance of controlling the metal oxide support size and morphology for optimizing metal-support bonding and ultimately for the development of improved catalysts and functional nanostructures.

Crystal-Field Tuning of Photoluminescence in Two-Dimensional Materials with Embedded Lanthanide Ions.

Lanthanide (Ln) group elements have been attracting considerable attention owing to the distinct optical properties. The crystal-field surroundings of Ln ions in the host materials can determine their energy level splitting, which is of vital importance to tailor their optical properties. 2D MoS2 single crystals were utilized as the host material to embed Eu3+ and energy-level splitting was achieved for tuning its photoluminescence (PL). The high anisotropy of the 2D host materials makes them distort the degenerate orbitals of the Ln ions more efficiently than the symmetrical bulk host materials. A significant red-shift of the PL peak for Eu3+ was observed. The strategy for tailoring the energy level splitting of Ln ions by the highly designable 2D material crystal field provides a new method to extend their optical properties.

Evolution of Irradiation-Induced Vacancy Defects in Boron Nitride Nanotubes.

Irradiation-induced vacancy defects in multiwalled (MW) boron nitride nanotubes (BNNTs) are investigated via in situ high-resolution transmission electron microscope operated at 80 kV, with a homogeneous distribution of electron beam intensity. During the irradiation triangle-shaped vacancy defects are gradually generated in MW BNNTs under a mediate electron current density (30 A cm(-2)), by knocking the B atoms out. The vacancy defects grow along a well-defined direction within a wall at the early stage as a result of the curvature induced lattice strain, and then develop wall by wall. The orientation or the growth direction of the vacancy defects can be used to identify the chirality of an individual wall. With increasing electron current density, the shape of the irradiation-induced vacancy defects changes from regular triangle to irregular polygon.

Accurate Nanoscale Crystallography in Real-Space Using Scanning Transmission Electron Microscopy.

Here, we report reproducible and accurate measurement of crystallographic parameters using scanning transmission electron microscopy. This is made possible by removing drift and residual scan distortion. We demonstrate real-space lattice parameter measurements with <0.1% error for complex-layered chalcogenides Bi2Te3, Bi2Se3, and a Bi2Te2.7Se0.3 nanostructured alloy. Pairing the technique with atomic resolution spectroscopy, we connect local structure with chemistry and bonding. Combining these results with density functional theory, we show that the incorporation of Se into Bi2Te3 causes charge redistribution that anomalously increases the van der Waals gap between building blocks of the layered structure. The results show that atomic resolution imaging with electrons can accurately and robustly quantify crystallography at the nanoscale.

Atom column indexing: atomic resolution image analysis through a matrix representation.

Here, we report the development of an approach to map atomic resolution images into a convenient matrix representation. Through the combination of two-dimensional Gaussian fitting and the projective standard deviation, atom column locations are projected onto two noncollinear reference lattice vectors that are used to assign each a unique (i, j) matrix index. By doing so, straightforward atomic resolution image analysis becomes possible. Using practical examples, we demonstrate that the matrix representation greatly simplifies categorizing atom columns to different sublattices. This enables a myriad of direct analyses, such as mapping atom column properties and correlating long-range atom column pairs. MATLAB source code can be downloaded from https://github.com/subangstrom/aci.

Atomic-Resolution Interfacial Reaction Mechanism between Bi2Te3-Based Alloys and Ni Electrodes.

Interdiffusion and solid-solid phase reaction at the interface between thermoelectric (TE) materials and the electrode critically influence interfacial transport properties and the overall energy conversion efficiency during service. Here, the microstructural evolution and diffusion mechanisms at the interfaces between the most widely used Bi2Te3-based TE materials, n-type Bi2Te2.7Se0.3 (BTS) and p-type Bi0.5Sb1.5Te3 (BST), and Ni electrodes were investigated at atomic resolution using spherical aberration-corrected scanning transmission electron microscopy (STEM). The BTS(0001)/Ni and BST(0001)/Ni interfaces were constructed by depositing Ni nanoparticles on mechanically exfoliated BTS and BST bulk materials and subsequent annealing. The interfacial reaction is initially dominated by Ni diffusion into the TE matrix to form NiAs-type NiM intermetallics, while Ni trans-quintuple-layer diffusion only occurs in Sb-rich BST. The Bi-rich BTS is more influenced by the Ni-Te preferential reaction, resulting in NiM abnormal grain growth and the formation of tilted and rotated interfaces. Bi diffusion into the BTS matrix forms a Bi double layer at the interface or Bi2[Bi2(Te,Se)3] as the annealing temperature increases, while Bi diffusion into the Ni thin film greatly accelerates the interfacial reaction rate, as elucidated by in situ heating STEM. The results provide essential structural details to understand and prevent the degradation of TE device performance.

Validation of density functionals for transition metals and intermetallics using data from quantitative electron diffraction.

Accurate low-order structure factors (Fg) measured by quantitative convergent beam electron diffraction (QCBED) were used for validation of different density functional theory (DFT) approximations. Twenty-three low-order Fg were measured for the transition metals Cr, Fe, Co, Ni, and Cu, and the transition metal based intermetallic phases γ-TiAl, ß-NiAl, and γ1-FePd using a multi-beam off-zone axis QCBED method and then compared with Fg calculated by ab initio DFT using the local density approximation (LDA) and LDA + U, and different generalized gradient approximations (GGA) functionals. Different functionals perform very differently for different materials and crystal structures regarding prediction of low-order Fg. All the GGA functionals tested in the paper except for EV93 achieve good overall agreement with the experimentally determined low-order Fg for BCC Cr and Fe, while EV93 performs the best for FCC Ni and Cu. The LDA and GGA functional fail to predict accurately the low-order Fg for ß-NiAl and γ1-FePd. The LDA + U approach, through tuning of U, can achieve excellent matches with the experimentally measured Fg for all the metallic systems investigated in this paper. The use of experimentally accessible low order Fg as an additional set of metrics in approaches of validation of DFT calculations is discussed and has potential to assist in and to stimulate development of improved functionals.

Structure and Performance Optimization of Co Magnetic Thin Films Deposited by Vacuum Evaporation Coating.

Co magnetic films are widely used in high-frequency magnetic recording and vertical magnetic recording due to their high saturation magnetization and magnetocrystalline anisotropy. In this work, ferromagnetic Co magnetic films were prepared on copper substrate by vacuum evaporation combined with heat treatment (H2 atmosphere), to investigate the impact of film thickness and annealing temperature on microstructure and magnetic properties. The results show that with the increase in annealing temperature, the Co thin film physical phase does not change significantly, the crystallinity increases, and the grain size increases, which is consistent with the results obtained from the SEM morphology map of the sample surface, leading to an increase in coercivity. By annealing experiments (atmospheric atmosphere) on Co magnetic films with and without an Al protective layer, as shown by scanning electron microscopy microscopic characterization results, it was verified that the Al layer can protect the inner Co layer from oxidation. As the film thickness increases from 10 to 300 nm, the magnetic properties of Co films change significantly. The saturation magnetization gradually increases from 0.89 to 5.21 emu/g, and the coercivity increases from 124.3 to 363.8 Oe. The remanence ratio of the 10 nm magnetic film is 0.82, which is much higher than the film remanence ratio of 0.46 at 50 nm. This is because when the thickness of the film is between 10 and 50 nm, the magnetic moments partially deviate from the in-plane direction, and the out-of-plane component reduces the film remanence ratio. This study shows that optimizing annealing temperature and film thickness can effectively control the structure and magnetic properties of Co magnetic films, which is of great significance for the development of the magnetic recording field.

Direct observation of cation diffusion driven surface reconstruction at van der Waals gaps.

Weak interlayer van der Waals (vdW) bonding has significant impact on the surface/interface structure, electronic properties, and transport properties of vdW layered materials. Unraveling the complex atomistic dynamics and structural evolution at vdW surfaces is therefore critical for the design and synthesis of the next-generation vdW layered materials. Here, we show that Ge/Bi cation diffusion along the vdW gap in layered GeBi2Te4 (GBT) can be directly observed using in situ heating scanning transmission electron microscopy (STEM). The cation concentration variation during diffusion was correlated with the local Te6 octahedron distortion based on a quantitative analysis of the atomic column intensity and position in time-elapsed STEM images. The in-plane cation diffusion leads to out-of-plane surface etching through complex structural evolutions involving the formation and propagation of a non-centrosymmetric GeTe2 triple layer surface reconstruction on fresh vdW surfaces, and GBT subsurface reconstruction from a septuple layer to a quintuple layer. Our results provide atomistic insight into the cation diffusion and surface reconstruction in vdW layered materials.