Recommendations on the utilization of telemedicine in cardiology.

The enormous progress made in recent years in the field of information and communication technology and also in sensor and computer technology has affected numerous fields of medicine and is capable of inducing even radical changes in diagnostic and therapeutic processes. This is particularly true for cardiology, where, for example, telemetric monitoring of cardiac and circulatory functions has been in use for many years. Nevertheless, broad application of newer telemedical processes has not yet been achieved to the extent one would expect from the encouraging results of numerous clinical studies in this field and the state of the art of the underlying technology. In the present paper, the Working Group on Rhythmology of the Austrian Cardiological Society aims to provoke a critical discussion of the digital change in cardiology and to make recommendations for the implementation of those telemedical processes that have been shown to exert positive effects on a wide variety of medical and economic parameters. The greatest benefit of telecardiological applications is certainly to be found in the long-term care of patients with chronic cardiovascular diseases. Accordingly, follow-up care of patients with cardiological rhythm implants, management of chronic heart failure and secondary prevention following an acute cardiac event during rehabilitation are currently the most important fields of application. Telemedicine is intended to enable high-quality and cost-efficient care for an increasing number of patients, whose care poses one of the greatest challenges to our healthcare system. Not least of all, telemedicine should make a decisive contribution to improving the quality of life of this segment of the population by favorably influencing mortality, morbidity and hospitalization as well as the patient's contribution to treatment.

Electro-mechanical Lung Simulator Using Polymer and Organic Human Lung Equivalents for Realistic Breathing Simulation.

Simulation models in respiratory research are increasingly used for medical product development and testing, especially because in-vivo models are coupled with a high degree of complexity and ethical concerns. This work introduces a respiratory simulation system, which is bridging the gap between the complex, real anatomical environment and the safe, cost-effective simulation methods. The presented electro-mechanical lung simulator, xPULM, combines in-silico, ex-vivo and mechanical respiratory approaches by realistically replicating an actively breathing human lung. The reproducibility of sinusoidal breathing simulations with xPULM was verified for selected breathing frequencies (10-18 bpm) and tidal volumes (400-600 ml) physiologically occurring during human breathing at rest. Human lung anatomy was modelled using latex bags and primed porcine lungs. High reproducibility of flow and pressure characteristics was shown by evaluating breathing cycles (nTotal = 3273) with highest standard deviation |3σ| for both, simplified lung equivalents ([Formula: see text] = 23.98 ± 1.04 l/min, µP = -0.78 ± 0.63 hPa) and primed porcine lungs ([Formula: see text] = 18.87 ± 2.49 l/min, µP = -21.13 ± 1.47 hPa). The adaptability of the breathing simulation parameters, coupled with the use of porcine lungs salvaged from a slaughterhouse process, represents an advancement towards anatomically and physiologically realistic modelling of human respiration.

Objective assessment of the fusion frequency in functional electrical stimulation using the fast Fourier transform.

In functional electrical stimulation (FES) the dynamics of tetanic muscle contractions is often described by the fusion frequency (FF), as determined by palpation: contractions elicited by stimulation frequencies above the FF appear smooth. To contribute to a more objective assessment of this important FES parameter, we have developed a dedicated signal analysis method based on fast Fourier transformation (FFT). The ripple to peak ratio (R(rpFFT)) - the relation between ripple amplitude and peak force value of a recorded tetanic muscle force in relation to the applied stimulation frequency - was determined automatically by analysing a 0.2-s interval in the steady state of a stimulation burst. The method was tested on simulated data and on force recordings from isolated tibialis anterior muscles of six rabbits. The results were compared to manual estimates. The robustness of the method was tested by adding noise and hum. Simulated noise at 100% of the ripple force increased R(rpFFT) by 4%. Hum at 20 Hz away from the stimulation frequency caused changes of less than 0.5%. The results of the automated analysis of recorded signals matched the manual estimates sufficiently well, especially for stimulation frequencies near or above FF. R(rpFFT) therefore seems suitable for automated, objective and robust assessment of the ripple and the FF of electrically stimulated muscle.

Development of a Multidisciplinary and Telemedicine Focused System Database.

BACKGROUND: Tele-rehabilitation at home is one of the promising approaches in increasing rehabilitative success and simultaneously decreasing the financial burden on the healthcare system. OBJECTIVES: Novel and mostly mobile devices are already in use, but shall be used in the future to a higher extent for allowing at home rehabilitation processes at a high quality level. The combination of exercises, assessments and available equipment is the basic objective of the presented database. METHODS: The database has been structured in order to allow easy-to-use and fast access for the three main user groups. Therapists - looking for exercise and equipment combinations - patients - rechecking their tasks for home exercises - and manufacturers - entering their equipment for specific use cases. RESULTS: The database has been evaluated by a proof of concept study and shows a high degree of applicability for the field of rehabilitative medicine. Currently it contains 110 exercises/assessments and 111 equipment/systems. CONCLUSION: Foundations of presented database are already established in the rehabilitative field of application, but can and will be enhanced in its functionality to be usable for a higher variety of medical fields and specifications.

Bluetooth Low Energy Peripheral Android Health App for Educational and Interoperability Testing Purposes.

Based on recent telemonitoring activities in Austria for enabling integrated health care, the communication interfaces between personal health devices (e.g. blood pressure monitor) and personal health gateway devices (e.g. smartphone, routing received information to wide area networks) play an important role. In order to ease testing of the Bluetooth Low Energy interface functionality of the personal health gateway devices, a personal health device simulator was developed. Based on specifications from the Bluetooth SIG a XML software test configuration file structure is defined that declares the specific features of the personal health devices simulated. Using this configuration file, different scenarios are defined, e.g. send a single measurement result from a blood pressure reading or sending multiple (historic) weight scale readings. The simulator is intended to be used for educational purposes in lectures, where the number of physical personal health devices can be reduced and learning can be improved. It could be shown that this simulator assists the development process of mHealth applications by reducing the time needed for development and testing.

Evaluation of Standards for Access Control Enabling PHR-S Federation.

The adoption of the Internet of Things (IoT) and mobile applications in the healthcare may transform the healthcare industry by offering better disease tracking and management as well as patient empowerment. Unfortunately, almost all of these new systems set up their own ecosystem and to be really valuable for the care process they need to be integrated or federated with user managed access control services based on international standards and profiles to enable interoperability. Thus, this work presents the results of an evaluation of available specifications for federated authorization, based on a set of basic requirements.

Propose of Standards Based IT Architecture to Enrich the Value of Allergy Data by Telemonitoring Data.

Interoperability is a key requirement for any IT-System to be future proof and cost efficient, due to the increasing interaction of IT-Systems in Healthcare. This feasibility study is part of a larger project focusing on the conceptualization and evaluation of interoperable and modular IT-Framework components for exchanging big data information sets. Hence, this project investigates the applicability of a standard based IT-Architecture for the integration of Personal Health Devices data and open data sources. As a proof of concept use case, pollen forecast data from the Medical University of Vienna were combined with Personal Health Device data and a data correlation was investigated. The standards were identified as well as selected in expert's reviewed and the Architecture was designed based on a literature research. Subsequently the prototype was implemented and successfully tested in interoperability tests. The study shows that the architecture meets the requirements. It can be flexibly extended according to further requirements due to its generic setup. However, further extensions of the Interoperability-Connector and a full test setup needs to be realized in future.

Biosignals, Standards and FHIR - The Way to Go?

BACKGROUND: Standards have become available to share semantically encoded vital parameters from medical devices, as required for example by personal healthcare records. Standardised sharing of biosignal data largely remains open. OBJECTIVES: The goal of this work is to explore available biosignal file format and data exchange standards and profiles, and to conceptualise end-to-end solutions. METHODS: The authors reviewed and discussed available biosignal file format standards with other members of international standards development organisations (SDOs). RESULTS: A raw concept for standards based acquisition, storage, archiving and sharing of biosignals was developed. The GDF format may serve for storing biosignals. Signals can then be shared using FHIR resources and may be stored on FHIR servers or in DICOM archives, with DICOM waveforms as one possible format. CONCLUSION: Currently a group of international SDOs (e.g. HL7, IHE, DICOM, IEEE) is engaged in intensive discussions. This discussion extends existing work that already was adopted by large implementer communities. The concept presented here only reports the current status of the discussion in Austria. The discussion will continue internationally, with results to be expected over the coming years.

Development of a virtual lab for practical eLearning in eHealth.

In recent years an ongoing development in educational offers for professionals working in the field of eHealth has been observed. This education is increasingly offered in the form of eLearning courses. Furthermore, it can be seen that simulations are a valuable part to support the knowledge transfer. Based on the knowledge profiles defined for eHealth courses a virtual lab should be developed. For this purpose, a subset of skills and a use case is determined. After searching and evaluating appropriate simulating and testing tools six tools were chosen to implement the use case practically. Within an UML use case diagram the interaction between the tools and the user is represented. Initially tests have shown good results of the tools' feasibility. After an extensive testing phase the tools should be integrated in the eHealth eLearning courses.

Development of Knowledge Profiles for International eHealth eLearning Courses.

Professionals working in the multidisciplinary field of eHealth vary in their educational background. However, knowledge in the areas of medicine, engineering and management is required to fulfil the tasks associated with eHealth sufficiently. Based on the results of an analysis of national and international educational offers a survey gathering user requirements for the development of knowledge profiles in eHealth was conducted (n=75) by professionals and students. During a workshop the first results were presented and discussed together with the network partners and the attendees. The resulting knowledge profiles contain knowledge areas of all three thematic content categories including fundamentals of medical terminology, standards and interoperability and usability as well as basics of all three content categories. The knowledge profiles are currently applied in a master's degree programme at the UAS Technikum Wien and will be developed further.

Applicability of IHE/Continua components for PHR systems: learning from experiences.

Capturing personal health data using smartphones, PCs or other devices, and the reuse of the data in personal health records (PHR) is becoming more and more attractive for modern health-conscious populations. This paper analyses interoperability specifications targeting standards-based communication of computer systems and personal health devices (e.g. blood pressure monitor) in healthcare from initiatives like Integrating the Healthcare Enterprise (IHE) and Continua Health Alliance driven by industry and healthcare professionals. Furthermore it identifies certain contradictions and gaps in the specifications and suggests possible solutions. Despite these shortcomings, the specifications allow fully functional implementations of PHR systems. Henceforth, both big business and small and medium-sized enterprises (SMEs) can actively contribute to the widespread use of large-scale interoperable PHR systems.

Security challenges in integration of a PHR-S into a standards based national EHR.

Health related data provided by patients themselves is expected to play a major role in future healthcare. Data from personal health devices, vaccination records, health diaries or observations of daily living, for instance, is stored in personal health records (PHR) which are maintained by personal health record systems (PHR-S). Combining this information with medical records provided by healthcare providers in electronic health records (EHR) is one of the next steps towards "personal care". Austria currently sets up a nationwide EHR system that incorporates all healthcare providers and is technically based on international standards (IHE, HL7, OASIS, ...). Looking at the expected potential of merging PHR and EHR data it is worth to analyse integration approaches. Although knowing that an integration requires the coordination of processes, information models and technical architectures, this paper specifically focuses on security issues by evaluating general security requirements for a PHR-S (based on HL7 PHR-S FM), comparing them with the information security specifications for the Austrian's national EHR (based on ISO/IES 27000 series) and identifying the main challenges as well as possible approaches.

Bedside patient data viewer using RFID and e-Ink technology.

In the daily routine of hospitals, which work with paper based medical records, the staff has to find the appropriate patient file if it needs information about the patient. With the introduction of ELGA the Austrian hospitals have to use specific standards for their clinical documentation. These structured documents can be used to feed an e-Ink reader with information about every patient in a hospital. Combined with RFID and security measures, the clinical staff is supported during the patient file searching process. The developed experimental setup of the Bedside Patient Data Viewer demonstrates a prototype of such a system. An Amazon Kindle Paperwhite is used to display processed data, supplied by a Raspberry Pi with an attached RFID module for identification purposes. Results show that such a system can be implemented, however a lot of organizational and technical issues remain to be solved.

LUMOR: an app for standardized control and monitoring of a porcine lung and its nutrient cycle.

The outcome of the EU-funded project ElBik has been the lung simulator 'iLung', which imitates an actively breathing human lung with a porcine lung. In order to keep the explanted lung in a nearly physiological state during transportation from the slaughterhouse to the ventilation laboratory the tissue needs to be nourished and temperature controlled. The Project AlveoPic designs a mobile transport vehicle implementing an ISO/IEEE 11073-20601 compliant communication interface for the exchange of the physical parameters, alert messages and setpoint-values. An appropriate 11073 domain information model is designed and limitations of the defined services and attributes are identified. For monitoring purposes the Android App LUMOR is implemented providing a user with an easy-to-handle GUI. It was found, that alert capabilities and remote set features are not well supported in ISO/IEEE 11073-20601 at the moment and possible workarounds are discussed.

Certification programs for eHealth--status quo.

The skills of the workforce are a core factor for the quality of healthcare systems. On top of the basic education, postgraduate training is an important factor for continuously maintaining as well as improving the workforce qualification level. Advanced training often provides certification of the acquired skills. This paper analyses the status quo of international certification programs in the sector of eHealth (EU, US, Global). It uses available literature and observations from international educational expert's workgroups. It identifies gaps regarding certifications in eHealth and suggests steps for solutions. Despite little attention to legal and financial eHealth related content in certification programs in the EU as well as a low degree of harmonization of international certifications in general, there are strong activities especially in the international scope towards personal certification programs in eHealth. Major changes are to be expected within the coming years.

Education for eHealth--a status analysis.

eHealth is not only a growing market, but also an important factor for new healthcare systems. National and European initiatives implicitly demand a higher level of knowledge in the areas of healthcare, engineering and management. As part of the eLearning4eHealth project an initial web based study was performed concentrating on European and global eHealth related educational programs. The results show that eHealth related courses do not evenly exist for the identified professions. 43% of the offered programs are focused on the engineering sector, whereas only 21% are available for the management sector. In order to offer compatible and comparable state of knowledge in the identified fields of profession and knowledge, further educational programs may be necessary. Despite the found shortcomings, results have shown that international activities have started in order to close the gaps and improve the quality of knowledge in the interdisciplinary field of eHealth.

The Vienna functional electrical stimulation system for restoration of walking functions in spastic paraplegia.

An eight-channel stimulation system, currently intended for stimulation of lower extremities, was developed and is introduced. The major development goals were easy handling, modularity to make the system easily adaptable for other functional electrical stimulation (FES) applications, and a wide stimulation parameter range for application-specific parameter optimization. For paraplegic stepping, the system worn by the patient consists of 2 four-channel stimulation modules, a central unit holding the battery and circuitry for power management and communication control, a wireless remote control unit, and a palmtop computer as the main control and input device. A software package for Microsoft Windows supports the design and optimization of stimulation sequences in the rehabilitation center. First tests with patients familiar with FES showed smoother movements during stepping and acceptable good handling. In combination with the PC software, the required stimulation sequences could be created in a very short time.