Thumb Metacarpophalangeal Joint Kinematics and Elongation of the Ulnar Collateral Ligament.

PURPOSE: The purpose of the study was to determine if the sphericity of the thumb metacarpophalangeal (MCP) joint influences the joint's rotational axis (RA) and elongation patterns of the ulnar collateral ligament (UCL). METHODS: Ulnar collateral ligament origins and attachments of 28 fresh-frozen cadaveric thumbs were marked with a radiopaque marker. Lateral radiographs were obtained in neutral and 20°, 40°, and 60° of flexion. The dorsal and palmar joint gap and the length of four different UCL portions were digitally measured in all flexion states. The RA was determined by the intersection of the midshaft axis of the proximal phalanx in neutral and flexion states. Sphericity of the MCP joint was assessed using morphometric parameters. Joints were grouped as round or flat. Differences in all measured parameters between groups were analyzed. RESULTS: During flexion, the dorsal joint gap increased by 322% in flat joints and 163% in round joints. The palmar joint gap decreased to 45% in flat joints and to 87% in round joints. The RA was at 29% of metacarpal height and 96% of metacarpal length in flat joints and at 40% of height and 86% of length in round joints. Maximum UCL elongation (111%) was noted at 40° flexion in the dorsal proper UCL in flat joints and at 60° flexion in the accessory UCL (117%) in round joints. CONCLUSIONS: In flat MCP joints, the RA is more dorsal and distal in the metacarpal head compared to round joints, resulting in a hinged flexion motion. Elongation of the UCL is highest at end flexion in round joints and highest at midflexion in flat joints. CLINICAL RELEVANCE: The different kinematics of flat and round MCP joints may contribute to the understanding of the pathophysiology of UCL ruptures. The propensity of this injury and the position in which they occur may be affected by the MCP joint morphology.

Anatomical investigations on the upper airway in premature and newborn babies.

Safe intubation of newborns remains a challenge. This investigates the upper airway anatomy of (pre-)term infants was investigated to improve airway management and the development of airway devices. Angles and diameters of both oral and nasal intubation pathways of 22 cadavers of premature and term stillborn infants were measured, relative to their gestational age (GA) and tested for statistical significance. The systematic influence of sex on the distribution of values was examined. Cast models of the oral and nasal intubation pathway were (produced using a silicone dental impression material) 3D-scanned. No significant correlation with GA was seen in the angles studied. However, four distances around the hard and soft palate did show statistically significant positive correlations with GA. Regarding differences between the sexes, only the angle between the entrance of the trachea and the esophagus was greater for male cadavers. The angles of the ventilation pathway of (pre-)term infants do not depend systematically on GA. Anatomically, laryngeal masks might therefore also be well-suited ventilators for preterm infants. Alterations in the size but not the shape of laryngeal masks for small preterm infants is recommended. The data obtained may thus be used as a basis for the development of airway devices and airway simulators for medical education and clinical training.

The effect of long calcar screws on the primary stability of 3-part, varus impacted proximal humeral fractures compared to short calcar screws: a real fracture simulation study.

BACKGROUND: Complex proximal humeral fracture ranks among the most common fracture types, especially in elderly patients. In locked plate fixation of proximal humerus fractures, the calcar is deciding for screws providing further medial column support. To date, the biomechanical effect of the length of these calcar screws is not well known. The purpose of this study was to analyze the effect of long calcar screws on fresh frozen prefractured cadaveric specimens. METHODS: In the present biomechanical study, 8 pairs of cadaveric proximal humeri were fractured identically using a custom-made fracture simulator. ORIF was performed using a locking plate (PHILOS; Fa. Synthes). The specimens were tested in a biomechanical setup under increased axial load without any calcar screws installed, with short calcar screws and long calcar screws installed. Strain gages (4-wire-120 Ohm, Fa. Vishay) mounted on the locking plate were used to evaluate the fixation strain and to give an estimate for primary stability.. RESULTS: The measured strain of the locking plate without calcar screws (804,64 µm/m) at maximum load (200 N) was significantly higher than with short (619,07 µm/m; p = 0.02) or long calcar screws (527,31 µm/m; p = 0.007). Additionally, strain with short calcar screws was noticeably higher in comparison to long calcar screws (619,07 µm/m vs. 527,31 µm/m; p = 0.03). CONCLUSION: Use of calcar screws improves the stability of realistically impacted 3-part varus humeral fractures. Long calcar screws that are positioned as close as possible to the joint provide further primary stability compared to short calcar screws. LEVEL OF EVIDENCE: Basic science study.

Morphometrics of the coronoid process and the radial notch of the ulna: implications for fracture assessment.

PURPOSE: A comprehensive analysis of the morphology of fractures of the coronoid process (CP) can aid diagnosis and guide treatment. The involvement of the radial notch of the ulna (RN)-e.g., in anterolateral facet fractures and transverse fractures of the CP-may influence the biomechanical conditions of the proximal radioulnar joint. However, the morphometric relation between the CP and the RN and the extent to what the proximal radioulnar joint can be affected in these types of fractures is unknown. METHODS: A total of 113 embalmed, cadaveric ulnae were dissected. All soft tissue was removed. Strictly lateral, high-resolution photographs were taken and digitally analyzed. The height of the CP and its relation to the RN was measured. Sex differences and correlations between measured parameters were calculated. RESULTS: Mean height of the CP was 16 mm (range: 12-23 mm; SD: 2). Mean height of the RN was 16 mm (11-25 mm; 2.2). The 50% mark of the CP corresponded to 18% (0-56%; 11.2) of the height of the RN. No significant differences were found between male and female specimens. CONCLUSION: The RN of the ulna extends only to a small part to the CP. Transverse or anterolateral fractures of less than 50% of the coronoid process may involve only a small portion of the proximal radioulnar joint.

Development of ribs and intercostal muscles in the chicken embryo.

In the thorax of higher vertebrates, ribs and intercostal muscles play a decisive role in stability and respiratory movements of the body wall. They are derivatives of the somites, the ribs originating in the sclerotome and the intercostal muscles originating in the myotome. During thorax development, ribs and intercostal muscles extend into the lateral plate mesoderm and eventually contact the sternum during ventral closure. Here, we give a detailed description of the morphogenesis of ribs and thoracic muscles in the chicken embryo (Gallus gallus). Using Alcian blue staining as well as Sox9 and Desmin whole-mount immunohistochemistry, we monitor synchronously the development of rib cartilage and intercostal muscle anlagen. We show that the muscle anlagen precede the rib anlagen during ventrolateral extension, which is in line with the inductive role of the myotome in rib differentiation. Our studies furthermore reveal the temporary formation of a previously unknown eighth rib in the chicken embryonic thorax.

Development of the amniote ventrolateral body wall.

In vertebrates, the trunk consists of the musculoskeletal structures of the back and the ventrolateral body wall, which together enclose the internal organs of the circulatory, digestive, respiratory and urogenital systems. This review gives an overview on the development of the thoracic and abdominal wall during amniote embryogenesis. Specifically, I briefly summarize relevant historical concepts and the present knowledge on the early embryonic development of ribs, sternum, intercostal muscles and abdominal muscles with respect to anatomical bauplan, origin and specification of precursor cells, initial steps of pattern formation, and cellular and molecular regulation of morphogenesis.

Protein expression pattern of the molecular chaperone Mdg1/ERdj4 during embryonic development.

The vertebrate-specific co-chaperone Mdg1/ERdj4, which is localized in the endoplasmic reticulum, controls the folding and degradation of proteins. We characterized its protein pattern during chick embryonic development. During early development, Mdg1/ERdj4 protein is present in mesenchymal and epithelial cells. In mesenchymal cells, it has a salt and pepper pattern. In contrast, during epithelial tissue differentiation, Mdg1/ERdj4 marks the basal and/or apical compartment of epithelial linings. The distinct protein pattern in epithelial tissue might point to its role in organizing and maintaining the epithelial structure. This could be achieved, e.g. by controlling folding and secretion of membrane-bound receptors or by inhibiting the IRE1α-Xbp1s-SNAI1/2-induced mesenchymalization. High Mdg1/ERdj4 protein levels are maintained in tissue with sustained secretory activity as in ependymal cells or enterocytes, substantiating its important role for secretion. We conclude that the transient elevation of Mdg1/ERdj4 protein levels controls the differentiation of epithelial linings while constitutive high levels are closely linked to secretory activity.

The Radioulnar Distance at the Level of the Radial Tuberosity.

Ruptures of the distal biceps brachii tendon are generally treated operatively due to their loss of supination and flexion force. A mechanical impingement at the insertion of the tendon at the radial tuberosity is discussed to play a role in the etiology of this injury. The aim of this study was to present a detailed, three-dimensional anatomical analysis of the radioulnar space at the radial tuberosity. A total of 166 imprints of the radioulnar space in neutral rotation and pronation from 84 cadaveric specimens of both arms using silicone impression material were produced for this study. Imprints were cut in slices of 3 mm and digitally measured after picture acquisition using a high-resolution digital camera. Distances were grouped into a proximal, central, and distal groups and used for correlation to morphometric data at the elbow (radial head diameter, ulna and radius length) as well as volume calculation. The mean radioulnar distance was 8.8 ± 4.0 mm in neutral rotation and 7.8 ± 3.9 mm in pronation. In pronation, the central zone was the smallest whereas in neutral rotation the proximal zone was the smallest. The volume of the radioulnar space did not reduce significantly during pronation. Little space is provided for the insertion of the distal biceps brachii tendon especially during pronation. This could play a role in the etiology of distal biceps brachii tendon ruptures and should be considered in the fixation after rupture of the tendon. Clin. Anat., 33:661-666, 2020. © 2019 Wiley Periodicals, Inc.

Anatomical investigation of the segmental vessels for the right-sided anterior surgical approach to the thoracic spine: a human cadaver study.

PURPOSE: Anterior surgical approaches to the thoracic spine are common procedures for the treatment of many diseases of the thoracic spine. Purpose of this anatomic study is to investigate the course of the segmental vessels of the thoracic spine for the anterior and lateral transthoracic approach from the right side. METHODS: 26 formalin-fixed human cadavers (20 femaless/6 male) with an average age of 84.9 ± 8.3 (range 67-97) were included. The segmental arteries and veins of the right thoracic cavity coursing between the third and twelfth thoracic vertebral body have been investigated. To define the localization of the vessels in accordance with the associated vertebral bodies, the distance between the endplates and vessels was measured in the ventral, middle and dorsal parts. RESULTS: The results of the study reveal that not only one, but also two segmental arteries and veins may course over the right hemi-vertebral body, especially in the upper and middle thoracic spine. Furthermore, in the middle and lower thoracic spine (T7-T12) the vessels course over the middle and lower third of the craniocaudal extent of the vertebral body. On the contrary, in the upper thoracic spine (T3-T6), the vessels may course over the entire extent of the vertebral body. CONCLUSION: Due to these common anatomic variations and variability of the course of the segmental vessels, spinal surgeons should remain careful in the identification of the segmental vessels in order to minimize risk of vascular injury in case of right-sided anterior and lateral approach to the thoracic spine.

Somite development in the avian tail.

Somites are epithelial segments of the paraxial mesoderm. Shortly after their formation, the epithelial somites undergo extensive cellular rearrangements and form specific somite compartments, including the sclerotome and the myotome, which give rise to the axial skeleton and to striated musculature, respectively. The dynamics of somite development varies along the body axis, but most research has focused on somite development at thoracolumbar levels. The development of tail somites has not yet been thoroughly characterized, even though vertebrate tail development has been intensely studied recently with respect to the termination of segmentation and the limitation of body length in evolution. Here, we provide a detailed description of the somites in the avian tail from the beginning of tail formation at HH-stage 20 to the onset of degeneration of tail segments at HH-stage 27. We characterize the formation of somite compartment formation in the tail region with respect to morphology and the expression patterns of the sclerotomal marker gene paired-box gene 1 (Pax1) and the myotomal marker genes MyoD and myogenic factor 5 (Myf5). Our study gives insight into the development of the very last segments formed in the avian embryo, and provides a basis for further research on the development of tail somite derivatives such as tail vertebrae, pygostyle and tail musculature.

Insertional anatomy of the anterior medial collateral ligament on the sublime tubercle of the elbow.

BACKGROUND: Acute injuries to the anterior medial collateral ligament (AMCL) can occur due to valgus trauma or during other dislocating events to the elbow. AMCL lesions are often associated with bony lesions, such as radial head fractures or fractures of the coronoid process. We analyzed the insertion of the AMCL on the sublime tubercle in relation to surrounding osseous structures. We aimed to increase the understanding of the involvement of the AMCL in bony lesions to the sublime tubercle. METHODS: We investigated 86 elbows from 43 embalmed human specimens. We measured the most ventral extensions of the AMCL at the sublime tubercle in relation to a clearly defined and reproducible landmark. We used as our landmark a horizontal line (baseline) originating on the lesser sigmoid notch in a right angle to the ulnar ridge. RESULTS: The mean distance of the coronoid process tip to the baseline was 4.0 mm (standard deviation [SD], 1.3 mm; range, 1.4-6.7 mm). The mean distance of the ventral extension of the AMCL to the horizontal line was 3.7 mm (SD, 2.6 mm; range: 9.4-2.2 mm). The mean horizontal distance between the ventral aspect of the AMCL and the coronoid tip was 13.7 mm (SD, 2.5 mm; range, 7.7-20.5 mm). CONCLUSIONS: We present a detailed description of the insertional anatomy of the AMCL at the sublime tubercle. These values could be helpful for classifications of coronoid fractures and to estimate the involvement of the AMCL in fractures of the sublime tubercle.

Double electroporation in two adjacent tissues in chicken embryos.

In ovo electroporation is a well established method to introduce transgenes into a number of tissues in chicken embryos, e.g., neural tissue, limb mesenchyme, and somites. This method has been widely used to investigate cell lineage, cell morphology, and molecular pathways by localized expression of fluorescent reporter constructs. Furthermore gain- and loss-of-function experiments can be performed by electroporating transgenes or gene-silencing constructs. We have developed a new technique to electroporate tissues positioned opposite to each other with different plasmids using an electroporation chamber. As proof of principle, we electroporated the dorsal surface ectoderm with a reporter construct expressing mCherry and the subjacent somites with a reporter construct expressing EGFP. This double-electroporation technique allows investigation of the localization of two different proteins of interest in two adjacent tissues and will be useful to examine the cellular and molecular interaction of neighboring structures during embryonic development. Developmental Dynamics 247:1211-1216, 2018. © 2018 Wiley Periodicals, Inc.

The radial head size in relation to osseous landmarks of the forearm.

PURPOSE: Radial head fractures are regularly treated with radial head arthroplasty. To prevent limited motion or pain, the implant's size should match its normal anatomy. Preoperative estimation of the radial head size helps in finding the correct head component. The aim of this study was to measure bony landmarks in proximity to the radial head to estimate the required size of a prosthesis preoperatively. METHODS: Anatomical landmarks on 82 elbows from 41 embalmed specimens (19 male, 22 female) were measured using a digital caliper after removal of the specimens' tissue: the largest and smallest radial head diameter, length of the radius (styloid tip to radial head articular surface), and the length of the ulna (styloid tip to coronoid base). Additionally, cranio-caudal and antero-posterior diameters of the capitulum on scaled lateral elbow X-ray images were measured. RESULTS: The mean largest and smallest radial head diameters were 24.2 mm (± 2.2, range 19.9-30.3; ICC = 0.992) and 22.5 mm (± 2.0, range 18.9-27.5; ICC = 0.985). The mean radius length was 23.8 cm (± 1.6, range 20.1-27.1; ICC = 0.986), and the mean ulna length was 23.1 cm (± 1.6, range 19.3-26.3; ICC = 0.969). The mean antero-posterior capitulum diameter was 16.2 mm (± 2.4, range 10.4-21.0; ICC = 0.506), and the mean cranio-caudal diameter was 17.0 mm (± 3.3, range 10.0-23.9; ICC = 0.529). The highest correlation to radial head diameters could be shown for diameters of the contralateral radial head and the radius length. CONCLUSIONS: For preoperative estimation of the radial head, the diameters of the contralateral radial head or the radius length are the most accurate.

The dominant nutrient foramen at the clavicular midshaft: an anatomical study.

BACKGROUND: The aim of the present study was to describe the prevalence and topography of the dominant nutrient foramen at the clavicle. METHODS: 317 macerated human clavicles (167 right and 150 left) were available for the study. After detecting the dominant nutrient foramen, the total distance from the sternal surface to the examined nutrient foramen was measured. A foramen index (FI) was used for further data processing. RESULTS: We detected a dominant foramen in 300/317 (94.64%) clavicles, which was located in the middle third in 287/300 (95.7%) clavicles. The average clavicular length was measured at 14.9 cm ± 1.0 cm (range 11.6-17.5 cm) with an average foraminal distance from the sternoclavicular joint surface of 7.9 cm ± 1.3 cm (range 0.9-12.6 cm) in total. The mean FI was 53.2% ± SD 7.4% (range 5.5-79.3%). CONCLUSION: The present study provides a topographic mapping of the foraminal area (46-60% of the total clavicular length). The findings help to assess clavicular fracture patterns, which pass through the foraminal area.

Early development of the vertebral column.

The segmental organization of the vertebrate body is most obviously visible in the vertebral column, which consists of a series of vertebral bones and interconnecting joints and ligaments. During embryogenesis, the vertebral column derives from the somites, which are the primary segments of the embryonic paraxial mesoderm. Anatomical, cellular and molecular aspects of vertebral column development have been of interest to developmental biologists for more than 150 years. This review briefly summarizes the present knowledge on early steps of vertebral column development in amniotes, starting from sclerotome formation and leading to the establishment of the anatomical bauplan of the spine composed of vertebral bodies, vertebral arches, intervertebral discs and ribs, and their specific axial identities along the body axis.

Communication between distant epithelial cells by filopodia-like protrusions during embryonic development.

Long-range intercellular communication is essential for the regulation of embryonic development. Apart from simple diffusion, various modes of signal transfer have been described in the literature. Here, we describe a novel type of cellular extensions found in epithelial cells of the somites in chicken embryos. These filopodia-like protrusions span the subectodermal space overlying the dorsal surface of the somites and contact the ectoderm. We show that these protrusions are actin- and tubulin-positive and require Rac1 for their formation. The presence of glycophosphatidylinositol-anchored proteins and net retrograde trafficking of the transmembrane Wnt-receptor Frizzled-7 along the protrusions indicate their role in signal transport and distribution. Taken together, our data suggest a role of filopodia-like protrusions in mediating signaling events between distant epithelial cells during embryonic development.

Biomechanical Comparison of Fixation With a Single Screw Versus Two Kirschner Wires in Distal Chevron Osteotomies of the First Metatarsal: A Cadaver Study.

Distal chevron osteotomy is a common procedure for surgical correction of hallux valgus. Osteosynthesis with 1 screw or 2 Kirschner wires has been commonly used. We compared the stability of the 2 techniques in distal chevron osteotomy. Sixteen first metatarsals from fresh-frozen human cadaver feet (9 different cadaveric specimens) were used. A standardized distal chevron osteotomy was performed. One first metatarsal from each pair was assigned to group 1 (3.5-mm cortical screw; n = 8) and one to group 2 (two 1.6-mm Kirschner wires; n = 8). Using a materials testing machine, the head of the first metatarsals was loaded in 2 different configurations (cantilever and physiologic) in succession. In the cantilever configuration, the relative stiffness of the osteosynthesis compared with intact bone was 59% ± 27% in group 1 and 68% ± 18% in group 2 (p = .50). In the physiologic configuration, it was 38% ± 25% in group 1 and 35% ± 7% in group 2 (p = .75). The failure strength in the cantilever configuration was 187 ± 105 N in group 1 and 259 ± 71 N in group 2 (p = .21). No statistically significant differences were found in stability between the 2 techniques. The use of 1 screw or 2 Kirschner wires had no significant differences in their biomechanical loading capacity for osteosynthesis in distal chevron osteotomies for treatment of hallux valgus.

Signaling filopodia in vertebrate embryonic development.

Next to classical diffusion-based models, filopodia-like cellular protrusions have been proposed to mediate long range signaling events and morphogen gradient formation during communication between distant cells. An increasing wealth of data indicates that in spite of variable characteristics of signaling filopodia in different biological contexts, they represent a paradigm of intercellular crosstalk which is presently being unraveled in a growing literature. Here, we summarize recent advances in investigating the morphology, cellular basis and function of signaling filopodia, with focus on their role during embryonic development in vertebrates.

Radial shortening osteotomy reduces radiocapitellar contact pressures while preserving valgus stability of the elbow.

PURPOSE: Shortening osteotomy of the proximal radius might represent a potential salvage procedure in symptomatic radiocapitellar osteoarthritis, which could decrease radiocapitellar load while preserving the native radial head. In an in-vitro biomechanical investigation, we sought to determine whether shortening osteotomy of the proximal radius (1) decreases the radiocapitellar joint pressure upon axial loading and (2) retains valgus stability of the elbow. In addition, the anatomic configuration of the lesser sigmoid notch was evaluated to assess possible contraindications. METHODS: Axial loading (0-400 N) and valgus torque (7.5 N m) over the full range of motion were applied to 14 fresh-frozen specimens before and after shortening osteotomy of the proximal radius by 2.5 mm. Radiocapitellar and ulnohumeral load distribution during axial compression was evaluated using a digital pressure mapping sensor. Valgus displacement was analyzed with a 3D camera system. The inclination angle (α) of the lesser sigmoid notch was assessed via 50 CT scans. RESULTS: Up to axial loading of 250 N, shortening osteotomy caused a significant decrease in radiocapitellar contact pressures (p < 0.041). Valgus stability of specimens did not differ before and after shortening osteotomy (n.s.). The mean inclination angle (α) of the lesser sigmoid notch was 11.3° ± 6.3°. 46% had an inclination angle of ≤ 10° (type I). 46% had an inclination angle of 11°-20° (type II). In 8%, the inclination angle was >20° (type III). CONCLUSION: Shortening osteotomy of the proximal radius can decrease radiocapitellar contact pressures during axial loading of up to 250 N. Primary valgus stability is not relevantly influenced by this procedure. In few patients, shortening osteotomy may cause radioulnar impingement of the radial head at the distal edge of the lesser sigmoid notch due to an inclination angle of >20°. Shortening osteotomy might be a promising treatment option to decrease pain levels in case of isolated radiocapitellar osteoarthritis.

Concomitant injury of the annular ligament in fractures of the coronoid process and the supinator crest.

BACKGROUND: Fractures of the coronoid process or the supinator crest, as well as arthroscopic resection of osteophytes around the coronoid process, can endanger the attachment of the annular ligament (AL) to the proximal ulna. The purpose of this study was to investigate the corresponding insertional areas of the AL within this context. METHODS: In 30 embalmed human cadaveric elbow specimens, the insertional area of the AL at the anterior and posterior margin of the sigmoid notch was characterized. The distances and relations of the AL insertion anteriorly to the coronoid surface, the coronoid tip, and the depth of the coronoid process, as well as posteriorly to the supinator crest, were evaluated macroscopically. RESULTS: The mean distance of the anterior insertion area was 1.9 ± 0.6 mm (range, 1.0-3.1 mm) to the coronoid articular surface and 6.2 ± 1.7 mm (range, 2.9-10.2 mm) to the tip of the coronoid. The distance of the anterior insertion in relation to the depth of the coronoid process was 44% ± 11% (range, 30%-69%). The distance of the posterior insertion area to the level of the sigmoid notch measured from 3.5 ± 1.5 mm (range, 0.5-6.5 mm) to 17.7 ± 2.9 mm (range, 13.1-25.4 mm). CONCLUSIONS: Coronoid fractures involving 44% or more of the coronoid process and anterolaterally oriented fractures where one-third of the anterolateral facet is affected are accompanied by a complete anterior bony disruption of the AL. Arthroscopic resection of the coronoid tip should be limited to 1 mm distal to the coronoid articular surface to avoid injury to the AL. Fractures of the upper half of the supinator crest place the AL at risk at its posterior insertion.