Donor site morbidity after computer assisted surgical reconstruction of the mandible using deep circumflex iliac artery grafts: a cross sectional study.

BACKGROUND: Computer Assisted Design and Computer Assisted Manufacturing (CAD/CAM) have revolutionized oncologic surgery of the head and neck. A multitude of benefits of this technique has been described, but there are only few reports of donor site comorbidity following CAD/CAM surgery. METHODS: This study investigated comorbidity of the hip following deep circumflex iliac artery (DCIA) graft raising using CAD/CAM techniques. A cross-sectional examination was performed to determine range of motion, muscle strength and nerve disturbances. Furthermore, correlations between graft volume and skin incision length with postoperative donor site morbidity were assessed using Spearman's rank correlation, linear regression and analysis of variance (ANOVA). RESULTS: Fifteen patients with a mean graft volume of 21.2 ± 5.7 cm3 and a mean incision length of 228.0 ± 30.0 mm were included. Patients reported of noticeable physical limitations in daily life activities (12.3 ± 11.9 weeks) and athletic activities (38.4 ± 40.0 weeks in mean) following surgery. Graft volume significantly correlated with the duration of the use of walking aids (R = 0.57; p = 0.033) and impairment in daily life activities (R = 0.65; p = 0.012). The length of the scar of the donor-site showed a statistically significant association with postoperative iliohypogastric nerve deficits (F = 4.4, p = 0.037). Patients with anaesthaesia of a peripheral cutaneous nerve had a larger mean scar length (280 ± 30.0 mm) than subjects with hypaesthesia (245 ± 10.1 mm) or no complaints (216 ± 27.7 mm). CONCLUSIONS: Despite sophisticated planning options in modern CAD/CAM surgery, comorbidity of the donor site following  iliac graft harvesting is still a problem. This study is the first to investigate comorbidity after DCIA graft raising in a patient group treated exclusively with CAD/CAM techniques. The results indicate that a minimal invasive approach in terms of small graft volumes and small skin incisions could help to reduce postoperative symptomatology. Trial registration Retrospectively registered at the German Clinical Trials Register (DRKS-ID: DRKS00029066); registration date: 23/05/2022.

Stimulated Raman histology for histological evaluation of oral squamous cell carcinoma.

OBJECTIVES: To investigate whether in patients undergoing surgery for oral squamous cell carcinoma, stimulated Raman histology (SRH), in comparison with H&E-stained frozen sections, can provide accurate diagnoses regarding neoplastic tissue and sub-classification of non-neoplastic tissues. MATERIALS AND METHODS: SRH, a technology based on Raman scattering, was applied to generate digital histopathologic images of 80 tissue samples obtained from 8 oral squamous cell carcinoma (OSCC) patients. Conventional H&E-stained frozen sections were then obtained from all 80 samples. All images/sections (SRH and H&E) were analyzed for squamous cell carcinoma, normal mucosa, connective tissue, muscle tissue, adipose tissue, salivary gland tissue, lymphatic tissue, and inflammatory cells. Agreement between SRH and H&E was evaluated by calculating Cohen's kappa. Accuracy of SRH compared to H&E was quantified by calculating sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) as well as area under the receiver operating characteristic curve (AUC). RESULTS: Thirty-six of 80 samples were classified as OSCC by H&E-based diagnosis. Regarding the differentiation between neoplastic and non-neoplastic tissue, high agreement between H&E and SRH (kappa: 0.880) and high accuracy of SRH (sensitivity: 100%; specificity: 90.91%; PPV: 90.00%, NPV: 100%; AUC: 0.954) were demonstrated. For sub-classification of non-neoplastic tissues, SRH performance was dependent on the type of tissue, with high agreement and accuracy for normal mucosa, muscle tissue, and salivary glands. CONCLUSION: SRH provides high accuracy in discriminating neoplastic and non-neoplastic tissues. Regarding sub-classification of non-neoplastic tissues in OSCC patients, accuracy varies depending on the type of tissue examined. CLINICAL RELEVANCE: This study demonstrates the potential of SRH for intraoperative imaging of fresh, unprocessed tissue specimens from OSCC patients without the need for sectioning or staining.

Stimulated Raman histology in the neurosurgical workflow of a major European neurosurgical center - part A.

Histopathological diagnosis is the current standard for the classification of brain and spine tumors. Raman spectroscopy has been reported to allow fast and easy intraoperative tissue analysis. Here, we report data on the intraoperative implementation of a stimulated Raman histology (SRH) as an innovative strategy offering intraoperative near real-time histopathological analysis. A total of 429 SRH images from 108 patients were generated and analyzed by using a Raman imaging system (Invenio Imaging Inc.). We aimed at establishing a dedicated workflow for SRH serving as an intraoperative diagnostic, research, and quality control tool in the neurosurgical operating room (OR). First experiences with this novel imaging modality were reported and analyzed suggesting process optimization regarding tissue collection, preparation, and imaging. The Raman imaging system was rapidly integrated into the surgical workflow of a large neurosurgical center. Within a few minutes of connecting the device, the first high-quality images could be acquired in a "plug-and-play" manner. We did not encounter relevant obstacles and the learning curve was steep. However, certain prerequisites regarding quality and acquisition of tissue samples, data processing and interpretation, and high throughput adaptions must be considered. Intraoperative SRH can easily be integrated into the workflow of neurosurgical tumor resection. Considering few process optimizations that can be implemented rapidly, high-quality images can be obtained near real time. Hence, we propose SRH as a complementary tool for the diagnosis of tumor entity, analysis of tumor infiltration zones, online quality and safety control and as a research tool in the neurosurgical OR.

Neuropathological interpretation of stimulated Raman histology images of brain and spine tumors: part B.

Intraoperative histopathological examinations are routinely performed to provide neurosurgeons with information about the entity of tumor tissue. Here, we quantified the neuropathological interpretability of stimulated Raman histology (SRH) acquired using a Raman laser imaging system in a routine clinical setting without any specialized training or prior experience. Stimulated Raman scattering microscopy was performed on 117 samples of pathological tissue from 73 cases of brain and spine tumor surgeries. A board-certified neuropathologist - novice in the interpretation of SRH - assessed image quality by scoring subjective tumor infiltration and stated a diagnosis based on the SRH images. The diagnostic accuracy was determined by comparison to frozen hematoxylin-eosin (H&E)-stained sections and the ground truth defined as the definitive neuropathological diagnosis. The overall SRH imaging quality was rated high with the detection of tumor cells classified as inconclusive in only 4.2% of all images. The accuracy of neuropathological diagnosis based on SRH images was 87.7% and was non-inferior to the current standard of fast frozen H&E-stained sections (87.3 vs. 88.9%, p = 0.783). We found a substantial diagnostic correlation between SRH-based neuropathological diagnosis and H&E-stained frozen sections (κ = 0.8). The interpretability of intraoperative SRH imaging was demonstrated to be equivalent to the current standard method of H&E-stained frozen sections. Further research using this label-free innovative alternative vs. conventional staining is required to determine to which extent SRH-based intraoperative decision-making can be streamlined in order to facilitate the advancement of surgical neurooncology.

Increased Osteogenic Activity of Dynamic Cultured Composite Bone Scaffolds: Characterization and In Vitro Study.

PURPOSE: The purpose of this study was to develop and characterize beta-tricalcium phosphate (ß-TCP)/polycaprolactone (PCL) scaffolds, with 2 different ratios (50/50% and 65/35%), using 3-dimensionally (3D) printed dissolvable molds, and to evaluate cellular growth and osteogenic differentiation of both groups seeded with porcine bone marrow stem cells (pBMSCs) under dynamic culture in vitro. MATERIALS AND METHODS: Two different groups of scaffolds were produced: group 1 (n = 40) with a ratio (wt%) of 50/50% and group 2 (n = 40) with 65/35% of ß-TCP/PCL. Physicochemical, morphological, and mechanical characterization of the scaffolds were performed. Scaffolds were seeded with pBMSCs and differentiated osteogenically in dynamic culture. Cell density, distribution, and viability were assessed. Osteogenic differentiation was examined through alkaline phosphatase (ALP) staining, immunofluorescence, and photospectrometry. RESULTS: Osteogenic differentiated constructs showed homogenous and viable cell distribution. Cell density was significantly higher (P < .05) for 65/35% scaffolds at 10 days postseeding, whereas at 6 weeks, cell number equalized for both groups. ALP activity increased over time and was significantly higher (P < .05) for 65/35% scaffolds at 14 days postseeding. CONCLUSIONS: The mechanical properties of the developed 65/35% scaffolds were within the range of natural trabecular bone. Moreover, the 65/35% scaffolds showed biological advantages, such as higher cell growth and higher ALP activity.

Computed Tomography-Based Investigation on the Effects of Intravenous Bisphosphonate Administration on Tooth Growth in a Minipig Animal Model.

Background and Objectives: The objective of this study was to evaluate the effects of bisphosphonate (BP) administration on tooth growth, using CT-data of a minipig animal model investigation. Materials and Methods: Tooth growth was evaluated in minipigs, with eight animals receiving weekly zoledronate (ZOL) and three animals serving as the control group. Tooth growth was evaluated at the right 2nd molar (M2) in the maxilla. A computed tomography-based measuring method was applied to evaluate tooth growth in the coronal-apical, buccal-oral and mesial-distal axis. Results: ZOL-administration was found to impact tooth growth in all evaluated measuring axes, with the highest effect observed in the coronal-apical axis. Conclusions: Detrimental effects of BP administration on growing teeth have been reported by a number of investigators. The results of this investigation demonstrate that intravenous ZOL affects the growth of the whole tooth within a short period of administration. With BPs being administered to a growing number of pediatric patients, further studies should be conducted to qualify and quantify the effects of BPs on developing teeth.

Evaluation of computed tomography settings in the context of visualization and discrimination of low dose injections of a novel liquid soft tissue fiducial marker in head and neck imaging.

BACKGROUND: Intraoperative incorporation of radiopaque fiducial markers at the tumor resection surface can provide useful assistance in identifying the tumor bed in postoperative imaging for RT planning and radiological follow-up. Besides titanium clips, iodine containing injectable liquid fiducial markers represent an option that has emerged more recently for this purpose. In this study, marking oral soft tissue resection surfaces, applying low dose injections of a novel Conformité Européenne (CE)-marked liquid fiducial marker based on sucrose acetoisobutyrate (SAIB) and iodinated SAIB (x-SAIB) was investigated. METHODS: Visibility and discriminability of low dose injections of SAIB/x-SAIB (10 µl, 20 µl, 30 µl) were systematically studied at different kV settings used in clinical routine in an ex-vivo porcine mandible model. Transferability of the preclinical results into the clinical setting and applicability of DE-CT were investigated in initial patients. RESULTS: Markers created by injection volumes as low as 10 µl were visible in CT imaging at all kV settings applied in clinical routine (70-120 kV). An injection volume of 30 µl allowed differentiation from an injection volume of 10 µl. In a total of 118 injections performed in two head and neck cancer patients, markers were clearly visible in 83% and 86% of injections. DE-CT allowed for differentiation between SAIB/x-SAIB markers and other hyperdense structures. CONCLUSIONS: Injection of low doses of SAIB/x-SAIB was found to be a feasible approach to mark oral soft tissue resection surfaces, with injection volumes as low as 10 µl found to be visible at all kV settings applied in clinical routine. With the application of SAIB/x-SAIB reported for tumors of different organs already, mostly applying relatively large volumes for IGRT, this study adds information on the applicability of low dose injections to facilitate identification of the tumor bed in postoperative CT and on performance of the marker at different kV settings used in clinical routine.

Vascularized scapula and latissimus dorsi flap for CAD/CAM assisted reconstruction of mandibular defects including the mandibular condyle: technical report and clinical results.

BACKGROUND: Reconstruction of mandibular continuity and function after tumor resection is challenging, particularly in cases including the mandibular condyle. Various approaches for reconstruction after disarticulation resection have been reported. However, the scapula flap has received little attention as a treatment option in these cases. PATIENTS AND METHODS: Three cases of computer aided design and computer aided manufacturing (CAD/CAM) assisted reconstruction after disarticulation resection using a vascularized scapula and latissimus dorsi flap are reported. All cases required reconstruction of the mandibular ramus and condyle in combination with the reconstruction of large and complex soft tissue defects. RESULTS: The surgical procedure was deemed successful in all cases. The scapula flap could be placed as preoperatively planned and patients regained their preoperative occlusion pattern and satisfying mouth opening-ranges. The large soft tissue defects could reliably be reconstructed using a latissimus dorsi flap. CONCLUSIONS: The scapula and latissimus dorsi flap can be considered a suitable option for the reconstruction of mandibular disarticulation resection defects in combination with large soft tissue defects.

Correction to: Treatment of stage II medication-related osteonecrosis of the jaw with necrosectomy and autologous bone marrow mesenchymal stem cells.

In the Original publication of the article, the co-author has been misspelled as Fabian Duttenhöfer in the article "Treatment of stage II medication-related osteonecrosis of the jaw with necrosectomy and autologous bone marrow mesenchymal stem cells" published in October 2017, Volume 105, Issue 4 of Odontology. The correct name is "Fabian Duttenhoefer".

Primary wound closure after tooth extraction for prevention of medication-related osteonecrosis of the jaw in patients under denosumab.

OBJECTIVES: Some recent reports have indicated that local infection causes osteonecrosis of the jaw and described that tooth extraction may not be a direct cause of developing medication-related osteonecrosis of the jaw (MRONJ) in patients receiving antiresorptive medications. Tooth extraction and elimination of the source of infection are expected to reduce the risk of developing MRONJ. However, there is no data regarding prevention for developing osteonecrosis of the jaw in patients receiving denosumab. Therefore, the aim of this study was to investigate the outcome of tooth extractions with proper wound closure in patients receiving denosumab. PATIENTS AND METHODS: Forty teeth in 19 patients treated with denosumab therapy were extracted under preoperative intravenous antibiotics. Patients who had already developed MRONJ in the extraction sites or who had a history of radiation therapy were excluded. During surgery, bone edges were smoothed and all wounds were closed using the double-layered technique. RESULTS: Thirty-seven extraction sites (92.5 %) in 17 out of 19 patients (89.5 %) were healed. However, three extraction sites in two patients had complications; one patient had exposed bone and developed MRONJ (stage 1) and the other developed a mucosa fistula. Additional surgical procedures were performed and all wounds were completely healed. CONCLUSIONS: Tooth extractions in patients receiving denosumab can be performed in an appropriate manner and result in good outcomes. CLINICAL RELEVANCE: This study indicated that tooth extraction with proper wound closure to avoid secondary infection may be effective for the prevention of MRONJ even in high-risk patients.

Treatment of stage II medication-related osteonecrosis of the jaw with necrosectomy and autologous bone marrow mesenchymal stem cells.

Treatment strategies for medication-related osteonecrosis of the jaw (MRONJ) remain controversial. Although the AAOMS suggests a conservative approach, a surgical management with necrosectomy is often required when conservative management has failed. Moreover, recent studies have shown promising results using an early stage surgical treatment. Over the past decade, cell-based bone regeneration utilizing bone marrow mesenchymal stem cells (MSCs) received increased attention. MSCs are known to promote wound healing and induce new bone formation in compromised tissue. Accordingly, the aim of this study was to assess the role of MSCs in the management of MRONJ. This study included 6 patients referred to our department with the diagnosis of MRONJ. Upon informed consent, the patients underwent surgical resection of necrotic bone followed by MSCs grafting. The MSCs were separated from bone marrow cells aspirated from the iliac crest using a bone marrow aspirate concentrate system. The MSCs were grafted into the defect with autologous thrombin and the defect was covered with a collagen membrane. In all cases, bony edges were rounded and the wound was closed using a three-layered technique. In the follow-up from 12 to 54 months, all patients including those who had impaired conditions, sepsis, or pathological fracture, showed satisfactory healing with no signs of wound infection. This pilot study indicated that surgical management in combination with MSCs transplantation seems to be a promising treatment modality in the therapy of MRONJ.

Magnetic resonance imaging of intraoral hard and soft tissues using an intraoral coil and FLASH sequences.

OBJECTIVES: To ascertain the feasibility of MRI as a non-ionizing protocol for routine dentomaxillofacial diagnostic imaging. Wireless coils were used for MRI of intraoral hard and soft tissues. METHODS: FLASH MRI was applied in vivo with a mandible voxel size of 250 × 250 × 500 µm3, FOV of 64 × 64 × 28 mm3 and acquisition time of 3:57 min and with a maxilla voxel size of 350 µm3 and FOV of 34 cm3 in 6:40 min. Ex vivo imaging was performed in 4:38 min, with a resolution of 200 µm3 and FOV of 36.5 cm3. Cone beam (CB) CT of the mandible and subjects were acquired. MRI was compared to CBCT and histological sections. Deviations were calculated with intraclass correlation coefficient (ICC) and coefficient of variation (cv). RESULTS: A high congruence between CBCT, MRI and specimens was demonstrated. Hard and soft tissues including dental pulp, periodontium, gingiva, cancellous bone and mandibular canal contents were adequately displayed with MRI. CONCLUSIONS: Imaging of select intraoral tissues was achieved using custom MRI protocols with an easily applicable intraoral coil in a clinically acceptable acquisition time. Comparison with CBCT and histological sections helped demonstrate dimensional accuracy of the MR images. The course of the mandibular canal was accurately displayed with CBCT and MRI. KEY POINTS: • MRI is a clinically available diagnostic tool in dentistry • Intraoral hard and soft tissues can be imaged with a high resolution with MRI • The dimensional accuracy of MRI is comparable to cone beam CT.

Zoledronate induces bisphosphonate-related osteonecrosis of the jaw in osteopenic sheep.

OBJECTIVES: Bisphosphonate-related osteonecrosis of the jaw (BP-ONJ) occurs in 1 % of patients with medication-induced osteoporosis treated with bisphosphonates. Sheep are an established large animal model for investigating osteoporotic skeletal changes. Zoledronate significantly reduces tissue mineral variability in ovariectomized sheep. The aim of this study was to analyze bone healing after tooth extraction in sheep with induced osteopenia and zoledronate administration. MATERIALS AND METHODS: Eight adult ewes were randomly divided into two groups of four animals. All sheep underwent ovariectomy and a low-calcium diet. Dexamethasone was administered weekly for 16 weeks. Zoledronate was then given every third week for a further 16 weeks in four sheep; these infusions were repeated after extraction of two lower premolars. Four sheep without zoledronate administrations served as controls. RESULTS: Due to general health conditions, two sheep of the zoledronate group had to be excluded before surgery. The remaining two sheep of this group developed BP-ONJ lesions at the extraction site and various other sites in both jaws. Control group animals showed uneventful wound healing. Histology of the alveolar processes as well as lumbar spine revealed larger portions of old bone and smaller portions of new bone in the zoledronate group. CONCLUSIONS: This animal study showed uneventful wound healing after tooth extraction in osteopenic sheep whereas zoledronate treatment leads to development of BP-ONJ-like lesions. CLINICAL RELEVANCE: As bisphosphonate administration is a standard treatment for glucocorticoid-induced osteoporosis, this model can be used for further research in pathogenesis and management of bisphosphonate-related adverse events.

In situ microradioscopy and microtomography of fatigue-loaded dental two-piece implants.

Synchrotron real-time radioscopy and in situ microtomography are the only techniques providing direct visible information on a micrometre scale of local deformation in the implant-abutment connection (IAC) during and after cyclic loading. The microgap formation at the IAC has been subject to a number of studies as it has been proposed to be associated with long-term implant success. The next step in this scientific development is to focus on the in situ fatigue procedure of two-component dental implants. Therefore, an apparatus has been developed which is optimized for the in situ fatigue analysis of dental implants. This report demonstrates both the capability of in situ radioscopy and microtomography at the ID19 beamline for the study of cyclic deformation in dental implants. The first results show that it is possible to visualize fatigue loading of dental implants in real-time radioscopy in addition to the in situ fatigue tomography. For the latter, in situ microtomography is applied during the cyclic loading cycles in order to visualize the opening of the IAC microgap. These results concur with previous ex situ studies on similar systems. The setup allows for easily increasing the bending force, to simulate different chewing situations, and is, therefore, a versatile tool for examining the fatigue processes of dental implants and possibly other specimens.

Bone loss after ridge expansion with or without reflection of the periosteum.

OBJECTIVE: To evaluate the role of the periosteum in preserving the buccal bone after ridge splitting and expansion with simultaneous implant placement. MATERIAL AND METHODS: In 12 miniature pigs, the mandibular premolars and first molars were removed together with the interdental bone septa and the buccal bone. Three months later, ridge splitting and expansion of the buccal plate was performed with simultaneous placement of two titanium implants per quadrant. Access by a mucosal flap (MF) was prepared on test sides, while a mucoperiosteal flap (MPF) with complete denudation of the buccal bone was increased on control sides. After healing periods of six and 12 weeks, the animals were sacrificed for histologic and histometric evaluation. RESULTS: In the MF group, all 16 implants were osseointegrated, while in the MPF group, four of 16 implants were lost. Noticeable differences of bone levels on the implant surface and of the bone crest (BC) were found between the MF and the MPF group. Buccally after 6 weeks, the median distance between the implant shoulder (IS) and the coronal-most bone on the implant (cBIC) was for the MF group -1.42 ± 0.42 mm and for the MPF group -4.80 ± 2.72 mm (P = 0.15). The median distance between the IS and the buccal BC was -1.24 ± 0.51 mm and -2.78 ± 1.98 mm (P = 0.12) for the MF and MPF group, respectively. After 12 weeks, median IS-cBIC was -2.12 ± 0.84 mm for MF and -7.19 mm for MPF, while IS-BC was -2.08 ± 0.79 mm for MF and -5.96 mm for MPF. After 6 weeks, the median buccal bone thickness for MF and MPF was 0.01 and 0 mm (P < 0.001) at IS, 1.48 ± 0.97 mm and 0 ± 0.77 mm (P = 0.07) at 2 mm apical to IS, and 2.12 ± 1.19 mm and 1.72 ± 01.50 mm (P = 0.86) at 4 mm apical to IS, respectively. After 12 weeks, buccal bone thickness in the MF group was 0 mm at IS, 0.21 mm at 2 mm apical to IS, and 2.56 mm at 4 mm apical to IS, whereas complete loss of buccal bone was measured from IS to 4 mm apical to IS for the MPF group. CONCLUSIONS: In this ridge expansion model in miniature pigs, buccal bone volume was significantly better preserved when the periosteum remained attached to the bone.

Mirroring Tool: The Simplest Computer-Aided Simulation Technology?

PURPOSE: The aims of this study were to present our experience in the use of the mirroring tool in computer-aided simulation (CAS) as well as to describe its diversified uses and indications systematically. MATERIALS AND METHODS: Between 2006 and 2012, 144 patients underwent preoperative CAS with mirroring tool developed by our department called Accu-Navi System. Various mirroring methods were performed and classified systemically. The outcome was evaluated thru its performance intraoperatively and the results postoperatively. RESULTS: The optimal preoperative plans were achieved for all 144 patients using the mirroring tool. This provided the surgeon with accurate surgical information preoperatively and intraoperatively. There were 138 operations performed based on the preoperative plan. The duration of the operations was significantly shortened with improved surgical accuracy and safety. The mean discrepancy was confirmed to be less than 1.0 mm by comparing postoperative computed tomography with the preoperative plan. Postoperative esthetics improved remarkably along with patients' satisfaction without complications thru long-term follow-up evaluations. CONCLUSIONS: The mirroring tool with its many uses can be a valuable CAS procedure for craniofacial surgery.

Orbital reconstruction: prefabricated implants, data transfer, and revision surgery.

External impact to the orbit may cause a blowout or zygomatico-maxillary fractures. Diagnosis and treatment of orbital wall fractures are based on both physical examination and computed tomography scan of the orbit. Injuries of the orbit often require a reconstruction of its orbital walls. Using computer-assisted techniques, anatomically preformed orbital implants, and intraoperative imaging offers precise and predictable results of orbital reconstructions. Secondary reconstruction of the orbital cavity is challenging due to fractures healed in malposition, defects, scarring, and lack of anatomic landmarks, and should be avoided by precise primary reconstruction. The development of preformed orbital implants based on topographical analysis of the orbital cavity was a milestone for the improvement of primary orbital reconstruction.

Virtual tumor mapping and margin control with 3-D planning and navigation.

Computer technology-based treatment approaches like intraoperative navigation and intensity-modulated radiation therapy have become important components of state of the art head and neck cancer treatment. Multidirectional exchange of virtual three-dimensional patient data via an interdisciplinary platform allows all medical specialists involved in the patients treatment to take full advantage of these technologies. This review article gives an overview of current technologies and future directions regarding treatment approaches that are based on a virtual, three-dimensional patient specific dataset: storage and exchange of spatial information acquired via intraoperative navigation allow for a highly precise frozen section procedure. In the postoperative setting, virtual reconstruction of the tumor resection surface provides the basis for improved radiation therapy planning and virtual reconstruction of the tumor with integration of molecular findings creates a valuable tool for postoperative treatment and follow-up. These refinements of established treatment components and novel approaches have the potential to make a major contribution to improving the outcome in head and neck cancer patients.

Reconstruction of dental roots for implant planning purposes: a retrospective computational and radiographic assessment of single-implant cases.

PURPOSE: The aim of the study was to assess the deviation between clinical implant axes (CIA) determined by a surgeon during preoperative planning and reconstructed tooth axes (RTA) of missing teeth which were automatically computed by a previously introduced anatomical SSM. METHODS: For this purpose all available planning datasets of single-implant cases of our clinic, which were planned with coDiagnostix Version 9.9 between 2018 and 2021, were collected for retrospective investigation. Informed consent was obtained. First, the intraoral scans of implant patients were annotated and subsequently analyzed using the SSM. The RTA, computed by the SSM, was then projected into the preoperative planning dataset. The amount and direction of spatial deviation between RTA and CIA were then measured. RESULTS: Thirty-five patients were implemented. The mean distance between the occlusal entry point of anterior and posterior implants and the RTA was 0.99 mm ± 0.78 mm and 1.19 mm ± 0.55, respectively. The mean angular deviation between the CIA of anterior and posterior implants and the RTA was 12.4° ± 3.85° and 5.27° ± 2.97° respectively. The deviations in anterior implant cases were systematic and could be corrected by computing a modified RTA (mRTA) with decreased deviations (0.99 mm ± 0.84 and 4.62° ± 1.95°). The safety distances of implants set along the (m)RTA to neighboring teeth were maintained in 30 of 35 cases. CONCLUSION: The RTA estimated by the SSM revealed to be a viable implant axis for most of the posterior implant cases. As there are natural differences between the anatomical tooth axis and a desirable implant axis, modifications were necessary to correct the deviations which occurred in anterior implant cases. However, the presented approach is not applicable for clinical use and always requires manual optimization by the planning surgeon.

AI-Based Detection of Oral Squamous Cell Carcinoma with Raman Histology.

Stimulated Raman Histology (SRH) employs the stimulated Raman scattering (SRS) of photons at biomolecules in tissue samples to generate histological images. Subsequent pathological analysis allows for an intraoperative evaluation without the need for sectioning and staining. The objective of this study was to investigate a deep learning-based classification of oral squamous cell carcinoma (OSCC) and the sub-classification of non-malignant tissue types, as well as to compare the performances of the classifier between SRS and SRH images. Raman shifts were measured at wavenumbers k1 = 2845 cm-1 and k2 = 2930 cm-1. SRS images were transformed into SRH images resembling traditional H&E-stained frozen sections. The annotation of 6 tissue types was performed on images obtained from 80 tissue samples from eight OSCC patients. A VGG19-based convolutional neural network was then trained on 64 SRS images (and corresponding SRH images) and tested on 16. A balanced accuracy of 0.90 (0.87 for SRH images) and F1-scores of 0.91 (0.91 for SRH) for stroma, 0.98 (0.96 for SRH) for adipose tissue, 0.90 (0.87 for SRH) for squamous epithelium, 0.92 (0.76 for SRH) for muscle, 0.87 (0.90 for SRH) for glandular tissue, and 0.88 (0.87 for SRH) for tumor were achieved. The results of this study demonstrate the suitability of deep learning for the intraoperative identification of tissue types directly on SRS and SRH images.