Directed Gradients in the Excited-State Energy Landscape of Poly(3-hexylthiophene) Nanofibers.

Funneling excitation energy toward lower energy excited states is a key concept in photosynthesis, which is often realized with at most two chemically different types of pigment molecules. However, current synthetic approaches to establish energy funnels, or gradients, typically rely on Förster-type energy-transfer cascades along many chemically different molecules. Here, we demonstrate an elegant concept for a gradient in the excited-state energy landscape along micrometer-long supramolecular nanofibers based on the conjugated polymer poly(3-hexylthiophene), P3HT, as the single component. Precisely aligned P3HT nanofibers within a supramolecular superstructure are prepared by solution processing involving an efficient supramolecular nucleating agent. Employing hyperspectral imaging, we find that the lowest-energy exciton band edge continuously shifts to lower energies along the nanofibers' growth direction. We attribute this directed excited-state energy gradient to defect fractionation during nanofiber growth. Our concept provides guidelines for the design of supramolecular structures with an intrinsic energy gradient for nanophotonic applications.

Electrogelation: Controlled Fast Formation of Micrometer-Thick Films from Low-Molecular Weight Hydrogelators.

The controlled electrochemical deposition of hydrogels from low-molecular weight hydrogelators (LMWHGs) allows for the defined formation of thin films on electrodes. Here, the deposition of fibrillar networks consisting of N,N',N″-tris(4-carboxyphenylene)-1,3,5-benzenetricarboxamide (BTA) onto ultraflat gold electrodes has been studied. This process, also termed electrogelation, is based on a local change in the pH due to electrolysis of water at the electrode. The protonation of the BTA sodium salt leads to self-assembly into supramolecular fibrillar structures mainly via hydrogen bonding of the uncharged molecules. The resulting hydrogel film was characterized in terms of its thickness by atomic force microscopy (AFM). Two different AFM-based techniques have been used: ex situ imaging of dried films and in situ nanoindentation of the hydrated hydrogel films. The deposition process was studied as a function of gelator concentration, applied potential, and gelation time. These parameters allow control of the film thickness to a high degree of accuracy within a few tenths of nanometers. Film formation takes place in a few seconds at moderate applied potentials, which is beneficial for biomedical applications. The results obtained for the BTA presented here can be transferred to any type of pH-responsive LMWHG and many reversibly formed hydrogel films.

Functional Mesostructured Electrospun Polymer Nonwovens with Supramolecular Nanofibers.

Functional, hierarchically mesostructured nonwovens are of fundamental importance because complex fiber morphologies increase the active surface area and functionality allowing for the effective immobilization of metal nanoparticles. Such complex functional fiber morphologies clearly widen the property profile and enable the preparation of more efficient and selective filter media. Here, the realization of hierarchically mesostructured nonwovens with barbed wire-like morphology is demonstrated by combining electrospun polystyrene fibers, decorated with patchy worm-like micelles, with solution-processed supramolecular short fibers composed of 1,3,5-benzenetricarboxamides with peripheral N,N-diisopropylaminoethyl substituents. The worm-like micelles with a patchy microphase-separated corona are prepared by crystallization-driven self-assembly of a polyethylene based triblock terpolymer and deposited on top of the polystyrene fibers by coaxial electrospinning. The micelles are designed in a way that their patches promote the directed self-assembly of the 1,3,5-benzenetricarboxamide and the fixation of the supramolecular nanofibers on the supporting polystyrene fibers. Functionality of the mesostructured nonwoven is provided by the peripheral N,N-diisopropylaminoethyl substituents of the 1,3,5-benzenetricarboxamide and proven by the effective immobilization of individual palladium nanoparticles on the supramolecular nanofibers. The preparation of hierarchically mesostructured nonwovens and their shown functionality demonstrate that such systems are attractive candidates to be used for example in filtration, selective separation and heterogenous catalysis.

Depletion of Omega-3 Fatty Acids in RBCs and Changes of Inflammation Markers in Patients With Morbid Obesity Undergoing Gastric Bypass.

BACKGROUND: Bariatric surgery is considered the most effective treatment for severe obesity. Despite this wide success, bariatric surgery is associated with increased risks of nutritional deficiencies. OBJECTIVES: To examine whether Roux-en-Y-gastric bypass (RYGB) alters essential fatty acid (FA) status and inflammation markers. METHODS: Subjects with obesity (n = 28; BMI > 40 kg/m2; mean age 48 years) were studied before and 1 year after RYGB. We collected blood samples before and 12 months after RYGB, and analyzed FA in RBCs and peripheral blood mononuclear cells (PBMC), and measured inflammation parameters in plasma. The proportion of total n-3 FAs was the primary outcome, while parameters related to other FAs and inflammation factors were the secondary parameters. In addition, PBMCs from 15 of the participants were cultured alone or with 100 and 200 µM DHA, and the production of IL-6, IL-1ß, PGE2, and prostaglandin F2-alpha (PGF2α) was assayed after endotoxin (LPS) stimulation. RESULTS: RYGB induced a significant reduction of BMI (-30%) and improvement of insulin resistance (-49%). While the proportion of arachidonic acid was 15% higher after RYGB, the proportions of total and individual n-3 FAs were 50%-75% lower (P < 0.01). Consequently, the RBC omega-3 index and n-3:n-6 fatty acid ratio were 45% and 50% lower after surgery, respectively. In isolated PBMCs, LPS induced the production of IL-6, IL-1ß, PGE2, and PGF2α in both pre- and post-RYGB cells, but the effects were 34%-65% higher (P < 0.05) after RYGB. This effect was abrogated by DHA supplementation. CONCLUSIONS: This study presents evidence that RBC and PBMC n-3 FAs are severely reduced in patients with obesity after RYGB. DHA supplementation in PBMC moderates the production of inflammation markers, suggesting that n-3 FA supplementation would merit a trial in bariatric patients.

Crystal Engineering of Supramolecular 1,4-Benzene Bisamides by Side-Chain Modification - Towards Tuneable Anisotropic Morphologies and Surfaces.

Benzene bisamides are promising building blocks for supramolecular nano-objects. Their functionality depends on morphology and surface properties. However, a direct link between surface properties and molecular structure itself is missing for this material class. Here, we investigate this interplay for two series of 1,4-benzene bisamides with symmetric and asymmetric peripheral substitution. We elucidated the crystal structures, determined the nano-object morphologies and derived the wetting behaviour of the preferentially exposed surfaces. The crystal structures were solved by combining single-crystal and powder X-ray diffraction, solid-state NMR spectroscopy and computational modelling. Bulky side groups, here t-butyl groups, serve as a structure-directing motif into a packing pattern, which favours the formation of thin platelets. The use of slim peripheral groups on both sides, in our case linear perfluorinated, alkyl chains, self-assemble the benzene bisamides into a second packing pattern which leads to ribbon-like nano-objects. For both packing types, the preferentially exposed surfaces consist of the ends of the peripheral groups. Asymmetric substitution with bulky and slim groups leads to an ordered alternating arrangement of the groups exposed to the surface. This allows the hydrophobicity of the surfaces to be gradually altered. We thus identified two leitmotifs for molecular packings of benzene bisamides providing the missing link between the molecular structure, the anisotropic morphologies and adjustable surface properties of the supramolecular nano-objects.

Reorientational dynamics of highly asymmetric binary non-polymeric mixtures - a dielectric spectroscopy study.

We present an analysis of dielectric spectra measured for a specially designed non-polymeric asymmetric binary glass former characterized by a large difference of the component's Tg (ΔTg = 216 K). We cover the whole additive concentration range from 4% up to 90% (by mass). Two main relaxations α1 and α2 are identified, which are characterized by well separated time scales and are attributed to the dynamics associated with the high-Tg component (α1) and the low-Tg component (α2). Frequency-temperature superposition does not apply. To cope with the extraordinary spectral broadening, we introduce a model consisting of a generalized Cole-Davidson (α1) and a Havriliak-Negami function with a low frequency truncation (α2). Whereas the α1-relaxation reflects essentially homogeneous dynamics and its spectra mainly broaden on the high-frequency flank of the relaxation peak, the α2-relaxation becomes broader on the low-frequency side reflecting pronounced dynamic heterogeneity in a more or less arrested matrix of high-Tg molecules. From the extracted time constants, two glass transition temperatures Tg1 and Tg2 can be derived, showing a non-trivial concentration dependence for Tg2. Supplementary, we find a ß-relaxation. The total relaxation strength Δε strongly deviates from ideal mixing, and therefore care has to be taken interpreting the corresponding Δεαi as representation of molecular populations.

Long-range energy transport in single supramolecular nanofibres at room temperature.

Efficient transport of excitation energy over long distances is a key process in light-harvesting systems, as well as in molecular electronics. However, in synthetic disordered organic materials, the exciton diffusion length is typically only around 10 nanometres (refs 4, 5), or about 50 nanometres in exceptional cases, a distance that is largely determined by the probability laws of incoherent exciton hopping. Only for highly ordered organic systems has the transport of excitation energy over macroscopic distances been reported--for example, for triplet excitons in anthracene single crystals at room temperature, as well as along single polydiacetylene chains embedded in their monomer crystalline matrix at cryogenic temperatures (at 10 kelvin, or -263 degrees Celsius). For supramolecular nanostructures, uniaxial long-range transport has not been demonstrated at room temperature. Here we show that individual self-assembled nanofibres with molecular-scale diameter efficiently transport singlet excitons at ambient conditions over more than four micrometres, a distance that is limited only by the fibre length. Our data suggest that this remarkable long-range transport is predominantly coherent. Such coherent long-range transport is achieved by one-dimensional self-assembly of supramolecular building blocks, based on carbonyl-bridged triarylamines, into well defined H-type aggregates (in which individual monomers are aligned cofacially) with substantial electronic interactions. These findings may facilitate the development of organic nanophotonic devices and quantum information technology.

Hierarchical Superstructures by Combining Crystallization-Driven and Molecular Self-Assembly.

Combining the unique corona structure of worm-like patchy micelles immobilized on a polymer fiber with the molecular self-assembly of 1,3,5-benzenetricarboxamides (BTAs) leads to hierarchical superstructures with a fir-tree-like morphology. For this purpose, worm-like patchy micelles bearing pendant, functional tertiary amino groups in one of the corona patches were prepared by crystallization-driven self-assembly and immobilized on a supporting polystyrene fiber by coaxial electrospinning. The obtained patchy fibers were then immersed in an aqueous solution of a tertiary amino-functionalized BTA to induce patch-mediated molecular self-assembly to well-defined fir-tree-like superstructures upon solvent evaporation. Interestingly, defined superstructures are obtained only if the pendant functional groups in the surface patches match with the peripheral substituents of the BTA, which is attributed to a local increase in BTA concentration at the polymer fibers' surface.

Enhancing Long-Range Energy Transport in Supramolecular Architectures by Tailoring Coherence Properties.

Efficient long-range energy transport along supramolecular architectures of functional organic molecules is a key step in nature for converting sunlight into a useful form of energy. Understanding and manipulating these transport processes on a molecular and supramolecular scale is a long-standing goal. However, the realization of a well-defined system that allows for tuning morphology and electronic properties as well as for resolution of transport in space and time is challenging. Here we show how the excited-state energy landscape and thus the coherence characteristics of electronic excitations can be modified by the hierarchical level of H-type supramolecular architectures. We visualize, at room temperature, long-range incoherent transport of delocalized singlet excitons on pico- to nanosecond time scales in single supramolecular nanofibers and bundles of nanofibers. Increasing the degree of coherence, i.e., exciton delocalization, via supramolecular architectures enhances exciton diffusivities up to 1 order of magnitude. In particular, we find that single supramolecular nanofibers exhibit the highest diffusivities reported for H-aggregates so far.

Supramolecular microtubes based on 1,3,5-benzenetricarboxamides prepared by self-assembly upon heating.

A series of three 1,3,5-benzenetricarboxamides with peripheral tertiary N,N-dialkyl-ethylamino substituents with different length of the alkyl groups is reported. In particular, the N1,N3,N5-tris[2-(diethylamino)-ethyl]-1,3,5-benzenetricarboxamide exhibits phase separation followed by self-assembly upon heating from aqueous solution into well-defined supramolecular fiber-like structures in the form of microtubes.

Gradient Photonic Materials Based on One-Dimensional Polymer Photonic Crystals.

In nature, animals such as chameleons are well-known for the complex color patterns of their skin and the ability to adapt and change the color by manipulating sophisticated photonic crystal systems. Artificial gradient photonic materials are inspired by these color patterns. A concept for the preparation of such materials and their function as tunable mechanochromic materials is presented in this work. The system consists of a 1D polymer photonic crystal on a centimeter scale on top of an elastic poly(dimethylsiloxane) substrate with a gradient in stiffness. In the unstrained state, this system reveals a uniform red reflectance over the entire sample. Upon deformation, a gradient in local strain of the substrate is formed and transferred to the photonic crystal. Depending on the magnitude of this local strain, the thickness of the photonic crystal decreases continuously, resulting in a position-dependent blue shift of the reflectance peak and hence the color in a rainbow-like fashion. Using more sophisticated hard-soft-hard-soft-hard gradient elastomers enables the realization of stripe-like reflectance patterns. Thus, this approach allows for the tunable formation of reflectance gradients and complex reflectance patterns. Envisioned applications are in the field of mechanochromic sensors, telemedicine, smart materials, and metamaterials.

Main and secondary relaxations of non-polymeric high-Tg glass formers as revealed by dielectric spectroscopy.

A series of high-Tg glass formers with Tg values varying between 347 and 390 K and molar masses in the range of 341 and 504 g mol-1 are investigated by dielectric spectroscopy. They are compared to paradigmatic reference systems. Differently polar side groups are attached to a rigid non-polar core unit at different positions. Thereby, the dielectric relaxation strength varies over more than two decades. All the relaxation features typical of molecular glass formers are rediscovered, i.e. stretching of the main (α-) relaxation, a more or less pronounced secondary (ß-) process, and a fragility index quite similar to that of other molecular systems. The position of the polar nitrile side group influences the manifestation of the ß-relaxation. The α-relaxation stretching displays the trend to become less with higher relaxation strength Δεα, confirming recent reports. Typical for a generic ß-process is the increase of its amplitude above Tg, which is found to follow a power-law behaviour as a function of the ratio τα/τß with a universal exponent; yet, its relative amplitude to that of the α-relaxation varies as does the temporal separation of both processes. The mean activation energy of the ß-process as well as the width of the energy distribution gß(E) increases more or less systematically with Tg. The latter is determined from the dielectric spectra subjected to a scaling procedure assuming a thermally activated process. Plotting gß(E) as a function of the reduced energy scale E/Tg, the distributions are centred between 19-35 and their widths differ by a factor 2-3.

Engineered Pyrogenic Materials as Tools to Affect Arsenic Mobility in Old Mine Site Soil of Mediterranean Region.

The application of pyrogenic materials in immobilization processes of metalloids represents a burning issue in environmental and waste applications and management. The main objective of this study was to characterize the effect of biomass pretreatment by Cu, Fe and Mg blending and pyrolysis temperature on As sorption efficiency as a model of anionic metalloids from model solutions and As immobilization in old mine soil by pyrogenic materials. The physico-chemical characterization of engineered materials produced in slow pyrolysis process at 400 and 700°C from metal-blended hard wood chips (30% w/w) showed increasing of surface areas (1.4-1.8-fold), changes in pH, and more than 50% decrease in total C content. The batch sorption processes of As ions by Cu-modified pyrogenic materials (CuPM), Fe-modified pyrogenic materials (FePM), and Mg-modified pyrogenic materials (MgPM) showed increasing uptake in order CuPM700 (Qmax 2.56 mg g-1) < CuPM400 (Qmax 3.88 mg g-1) < FePM700 (Qmax 5.90 mg g-1) < MgPM700 (Qmax 7.42 mg g-1) < MgPM400 (Qmax 9.59 mg g-1) < FePM400 (Qmax 10.55 mg g-1). Engineered pyrogenic materials produced at 400°C showed higher immobilization effect on soluble As in soil pore water of old mine site soil from Mediterranean area. FePM400 reduced mobility of arsenic > 3.2 times and MgPM400 > 5 times compared to control. Promising pyrogenic material MgPM400 showed immobilization effect also on additional heavy metals (Cd, Cu, Fe, Mn, Pb, Sr, Zn) present in studied soil.

A Periodic System of Supramolecular Elements.

Chemistry "beyond the molecule" is based on weak, noncovalent, and reversible interactions. As a consequence of these bonds being weak, structural organization by folding and self-assembly can only be fully exploited with larger molecules that can provide multiple binding sites. Such "supramolecules" can now be synthesized and their folding into desired conformations predicted. A new level of chemistry can now be realized through the creation of non-natural entities composed of molecular building blocks with defined secondary structures. Herein we define these building blocks as "supramolecular elements". We anticipate that further research on such large molecules will reveal construction principles dictated by recurring motifs that govern structure formation through folding and self-assembly. These principles are comparable to the organization of atoms in the Periodic Table of Chemical Elements and may lead to the establishment of a Periodic System of Supramolecular Elements.

Confinement templates for hierarchical nanoparticle alignment prepared by azobenzene-based surface relief gratings.

Alignment of nanoparticles to hierarchical periodic structures is an emerging field in the development of patterned surfaces. Common alignment methods are based on templates that guide particle self-assembly. These can be formed using lithographic methods offering an almost free choice of the motif, while being expensive and time-consuming for large-scale production. Alternatively, template formation by controlled wrinkling offers a low-cost formation, but often suffers from the formation of defect structures like line-defects and cracks. Here, we show a preparation technique for nanoparticle alignment substrates that is based on the inscription of holographic surface relief gratings with a periodic sinusoidal wave pattern on the surface of azobenzene films. As interference patterns are employed for structure formation, very uniform and defect-free gratings with tunable grating height and grating period can be prepared. These substrates were successfully replicated to poly(dimethyl siloxane) and the replicas used for the alignment of polystyrene latex particles. Accordingly produced substrates exhibiting gratings with a variation in grating height allow for efficient screening of nanoparticle alignment in a geometrical confinement in one single experiment. We anticipate our studies as a promising tool for the development of sensors, tunable gratings and metamaterials.

Unveiling the Role of Macrodipolar Interactions in the Properties of Self-Assembled Supramolecular Materials.

Self-assembling of supramolecules composed of benzene and cyclohexane tricarboxamide derivatives can form highly organized 1 D fibers exhibiting macrodipoles. The way fibers pack in the condensed phase governs the final properties of the supramolecular material, in which macrodipoles can be oriented parallel or antiparallel to each other, and their magnitude can be tuned by additional intra-columnar dipole stabilization. X-ray structural elucidation of these materials remains a real challenge due to the difficulty in growing single crystals. This problem can be tackled by using atomistic molecular dynamics to simulate supramolecular materials composed of cyclohexanetricarboxamide derivatives assuming different magnitudes and orientations of macrodipoles in the condensed phase, as we show here. The results provide insight on the isotropization mechanism of the supramolecules and also reveal that the relative orientation between macrodipoles can indeed influence their stability. This work nicely complements X-ray structural characterizations of supramolecular materials, and helps understand structure-property relationships of a range of similar noncovalent materials.

Hydrogelation Kinetics Measured in a Microfluidic Device with in Situ X-ray and Fluorescence Detection.

Efficient hydrogelators will gel water fast and at low concentrations. Small molecule gelling agents that assemble into fibers and fiber networks are particularly effective hydrogelators. Whereas it is straightforward to determine their critical concentration for hydrogelation, the kinetics of hydrogelation is more difficult to study because it is often very fast, occurring on the subsecond time scale. We used a 3D focusing microfluidic device combined with fluorescence microscopy and in situ small-angle X-ray scattering (SAXS) to study the fast pH-induced gelation of a model small molecule gelling agent at the millisecond time scale. The gelator is a 1,3,5-benzene tricarboxamide which upon acidification assembles into nanofibrils and fibril networks that show a characteristic photoluminescence. By adjusting the flow rates, the regime of early nanofibril formation and gelation could be followed along the microfluidic reaction channel. The measured fluorescence intensity profiles were analyzed in terms of a diffusion-advection-reaction model to determine the association rate constant, which is in a typical range for the small molecule self-assembly. Using in situ SAXS, we could determine the dimensions of the fibers that were formed during the early self-assembly process. The detailed structure of the fibers was subsequently determined by cryotransmission electron microscopy. The study demonstrates that 3D focusing microfluidic devices are a powerful means to study the self-assembly on the millisecond time scale, which is applied to reveal early state of hydrogelation kinetics. In combination with in situ fluorescence and X-ray scattering, these experiments provide detailed insights into the first self-assembly steps and their reaction rates.

Controlled Wrinkling of Gradient Metal Films.

Controlled wrinkling is a rather simple method of fabricating surface topographies. The production process is based on the spontaneous formation of wrinkles upon compression of a hard film attached to a soft elastic substrate. Controlled wrinkling typically features large-scale wrinkled samples with a discrete wavelength and amplitude. In this report, we employ an approach utilizing linear metal layer thickness gradients for the controlled formation of gradient wrinkle patterns. The observed wavelength modulation was experimentally achieved by preparing layer thickness gradients of gold, chromium, and indium by physical vapor deposition in combination with a poly(dimethyl siloxane) elastomer substrate. In case of chromium and indium, a thin SiO x surface layer was sufficient to ensure adhesion. However, in case of gold, an additional thin chromium adhesion layer was required. For the wrinkled gradient gold film, it was possible to tune the wavelength from 3.4 to 12.2 µm on a single substrate. The experimental data correspond well to the theoretical bilayer model from Stafford et al. Chromium has a significant higher Young's modulus and melting temperature than gold. However, chromium was successfully evaporated and gradient wrinkle patterns with wavelengths from 1.0 to 3.5 µm were realized. In contrast, indium has a considerable lower Young's modulus than gold and chromium, respectively. Consequently, lower wavelengths (0.6-1.0 µm) of the wrinkled gradient indium film were observed. These tunable wrinkled gradient metal films can be envisioned as components in sensors and optical and electro-optical devices.

Melt Electrowriting of Thermoplastic Elastomers.

Melt electrowriting (MEW), an additive manufacturing process, is established using polycaprolactone as the benchmark material. In this study, a thermoplastic elastomer, namely, poly(urea-siloxane), is synthesized and characterized to identify how different classes of polymers are compatible with MEW. This polyaddition polymer has reversible hydrogen bonding from the melt upon heating/cooling and highly resolved structures are achieved by MEW. The influence of applied voltage, temperature, and feeding pressure on printing outcomes behavior is optimized. Balancing these parameters, highly uniform and smooth-surfaced fibers with diameters ranging from 10 to 20 µm result. The quality of the 3D MEW scaffolds is excellent, with very accurate fiber stacking capacity-up to 50 layers with minimal defects and good fiber fusion between the layers. There is also minimal fiber sagging between the crossover points, which is a characteristic of thicker MEW scaffolds previously reported with other polymers. In summary, poly(urea-siloxane) demonstrates outstanding compatibility with the MEW process and represents a class of polymer-thermoplastic elastomers-that are, until now, untested with this approach.

Writing with Fluid: Structuring Hydrogels with Micrometer Precision by AFM in Combination with Nanofluidics.

Hydrogels have many applications in biomedical surface modification and tissue engineering. However, the structuring of hydrogels after their formation represents still a major challenge, in particular due to their softness. Here, a novel approach is presented that is based on the combination of atomic force microscopy (AFM) and nanofluidics, also referred to as FluidFM technology. Its applicability is demonstrated for supramolecular hydrogel films that are prepared from low-molecular weight hydrogelators, such as derivates of 1,3,5-benzene tricarboxamides (BTAs). BTA films can be dissolved selectively by ejecting alkaline solution through the aperture of a hollow AFM-cantilever connected to a nanofluidic controller. The AFM-based force control is essential in preventing mechanical destruction of the hydrogels. The resulting "chemical writing" process is studied in detail and the influence of various parameters, such as applied pressure and time, is validated. It is demonstrated that the achievable structuring precision is primarily limited by diffusion and the aperture dimensions. Recently, various additive techniques have been presented to pattern hydrogels. The here-presented subtractive approach can not only be applied to structure hydrogels from the large class of reversibly formed gels with superior resolution but would also allow for the selective loading of the hydrogels with active substances or nanoparticles.