RESUMO
Multiple system atrophy (MSA) is a rare and rapidly progressive atypical parkinsonian disorder characterized by oligodendroglial cytoplasmic inclusions containing α-synuclein (α-syn), demyelination, inflammation and neuronal loss. To date, no disease-modifying therapy is available. Targeting α-syn-driven oligodendroglial dysfunction and demyelination presents a potential therapeutic approach for restricting axonal dysfunction, neuronal loss and disease progression. The present study investigated the promyelinogenic potential of sobetirome, a blood-brain barrier permeable and central nervous system selective thyromimetic in the context of an in vitro MSA model. Oligodendrocyte precursor cells (OPCs) were obtained from transgenic mice overexpressing human α-syn specifically in oligodendrocytes (MBP29 mouse line), a well-described MSA model, and non-transgenic littermates. mRNA and protein expression analyses revealed a substantial rescue effect of sobetirome on myelin-specific proteins in control and α-syn overexpressing oligodendrocytes. Furthermore, myelination analysis using nanofibres confirmed that sobetirome increases both the length and number of myelinated segments per oligodendrocyte in primary murine α-syn overexpressing oligodendrocytes and their respective control. These results suggest that sobetirome may be a promising thyromimetic compound targeting an important neuropathological hallmark of MSA.
Assuntos
Doenças Desmielinizantes , Atrofia de Múltiplos Sistemas , Fenóis , Camundongos , Humanos , Animais , Atrofia de Múltiplos Sistemas/tratamento farmacológico , Atrofia de Múltiplos Sistemas/genética , Atrofia de Múltiplos Sistemas/metabolismo , alfa-Sinucleína/genética , alfa-Sinucleína/metabolismo , Acetatos/metabolismo , Camundongos Transgênicos , Oligodendroglia/metabolismo , Doenças Desmielinizantes/metabolismo , Modelos Animais de DoençasRESUMO
Clean water is one of the most important resources of the planet but human-made contamination with diverse pollutants increases continuously. Microplastics (<5 mm diameter) which can have severe impacts on the environment, are present worldwide. Degradation processes lead to nanoplastics (<1 µm), which are potentially even more dangerous due to their increased bioavailability. State-of-the-art wastewater treatment plants show a deficit in effectively eliminating micro- and nanoplastics (MNP) from water, particularly in the case of nanoplastics. In this work, the magnetic removal of three different MNP types across three orders of magnitude in size (100 nm-100 µm) is investigated systematically. Superparamagnetic iron oxide nanoparticles (SPIONs) tend to attract oppositely charged MNPs and form aggregates that can be easily collected by a magnet. It shows that especially the smallest fractions (100-300 nm) can be separated in ordinary high numbers (1013 mg-1 SPION) while the highest mass is removed for MNP between 2.5 and 5 µm. The universal trend for all three types of MNP can be fitted with a derived model, which can make predictions for optimizing SPIONs for specific size ranges in the future.
RESUMO
Genipin-cross-linked silk fibroin (SF) hydrogel is considered to be biocompatible and mechanically robust. However, its use remains a challenge for in situ forming applications due to its prolonged gelation process. In our attempt to facilitate the in situ fabrication of a genipin-mediated SF hydrogel, alginate dialdehyde (ADA) was utilized as a reinforcement template. Here, SF/ADA-based hydrogels with different compositions were synthesized covalently and ionically. Incorporating ADA into the SF hydrogel increased pore size (44.66-174.66 µm), porosity (61.59-80.40%), and the equilibrium swelling degree (7.60-30.17). Moreover, a wide range of storage modulus and compressive modulus were obtained by adjusting the proportions of SF and ADA networks within the hydrogel. The in vitro cell analysis using preosteoblast cells (MC3T3-E1) demonstrated the cytocompatibility of all hydrogels. Overall, the covalently and ionically cross-linked SF/ADA hydrogel represents a promising solution for in situ forming hydrogels for applications in tissue regeneration.
Assuntos
Fibroínas , Hidrogéis , Alginatos , Iridoides , Seda , Engenharia TecidualRESUMO
Patient-tailored silicone plug for HeartMate 3™ left ventricular assist device explantation in two successive males proceeded successfully. Given medical therapeutic advancements, FDA-approved plug systems designed by LVAD manufacturers themselves will be necessary for the near future to provide a safe and simple device explantation alternative that fulfills all regulatory standards.
RESUMO
For decades, crude oil spills and oil wastewater have become the most problematic environmental pollution and damage to public health. Therefore, it is considerable to develop superhydrophobic polymer foam for separating oil from water with high selectivity and sorption capacity. Here, a new type of environmentally friendly pure polypropylene (PP) foam with superhydrophobicity is first time proposed with a particular coexistence of microspheres and microporous structure fabricated via an advanced solvent-evaporation method. The PP foam exhibits exceptional superhydrophobic with a water contact angle of 151° and the maximum saturated adsorption capacity of 26 g g-1 . After more than 15 h of cyclic continuous oil-water pumping experiment, it still maintains a high oil absorption efficiency of 98%, providing the basis for practical commercial applications. More importantly, the variation of hydrophobic properties is described by Flory-Huggins polymer solution theory and Huggins interaction parameters, and the optimal solution ratio range is predicted which provides a relevant theoretical basis for actual industrial production.
Assuntos
Poluição por Petróleo , Polipropilenos , Microesferas , Poluição por Petróleo/análise , Polipropilenos/química , Solventes , Água/químicaRESUMO
Highly oriented electrospun conductive nanofibrous biocomposites (CNBs) of polylactic acid (PLA) and polyaniline (PANi) are fabricated using electrospinning. At the percolation threshold (φc), the growth of continuous paths between PANi particles leads to a steep increase in the electrical conductivity of fibers, and the McLachlan equation is fitted to identify φc. Annealing generates additional conductive channels, which lead to higher conductivity for dynamic percolation. For the first time, dynamic percolation is investigated for revealing time-temperature superposition in oriented conductive nanofibrous biocomposites. The crystallinity (χc) displays a linear dependence on annealing temperature within the confined fiber of CNBs. The increase in crystallinity due to annealing also increases the Young's modulus E of CNBs. The present study outlines a reliable approach to determining the conductivity and elasticity of nanofibers that are highly desirable for a wide range of biological tissue applications.
Assuntos
Nanofibras , Engenharia Tecidual , Elasticidade , Condutividade Elétrica , Poliésteres/farmacologia , Alicerces TeciduaisRESUMO
Due to its ability to reduce scarring and inflammation, human amniotic membrane is a widely used graft for wound dressings after corneal surgery. To overcome donor dependency and biological variances in the donor tissue, artificial nanofibrous grafts acting as drug carrier systems are promising substitutes. Electrospun nanofibrous scaffolds seem to be an appropriate approach as they offer the properties of permeable scaffolds with a high specific surface, the latter one depending on the fiber diameter. Electrospun scaffolds with fiber diameter of 35 nm, 113 nm, 167 nm and 549 nm were manufactured and coated by the layer-by-layer (LbL) technology with either hyaluronic acid or heparin for enhanced regeneration of corneal tissue after surgery. Studies on drug loading capacity and release kinetics defined a lower limit for nanofibrous scaffolds for effective drug loading. Additionally, scaffold characteristics and resulting mechanical properties from the application-oriented characterization of suture pullout from suture retention tests were examined. Finally, scaffolds consisting of nanofibers with a mean fiber diameter of 113 nm were identified as the best-performing scaffolds, concerning drug loading efficiency and resistance against suture pullout.
Assuntos
Ácido Hialurônico , Nanofibras , Bandagens , Portadores de Fármacos , Heparina/farmacologia , Humanos , Ácido Hialurônico/farmacologia , Nanofibras/uso terapêutico , Poliésteres , Engenharia Tecidual , Alicerces TeciduaisRESUMO
The use of organic-inorganic 3D printed composites with enhanced properties in biomedical applications continues to increase. The present study focuses on the development of 3D printed alginate-based composites incorporating inorganic fillers with different shapes (angular and round), for bone regeneration. Reactive fillers (bioactive glass 13-93 and hydroxyapatite) and non-reactive fillers (inert soda-lime glass) were investigated. Rheological studies and the characterization of various extrusion-based parameters, including material throughput, printability, shape fidelity and filament fusion, were carried out to identify the parameters dominating the printing process. It was shown that the effective surface area of the filler particle has the highest impact on the printing behavior, while the filler reactivity presents a side aspect. Composites with angular particle morphologies showed the same high resolution during the printing process, almost independent from their reactivity, while composites with comparable amounts of round filler particles lacked stackability after printing. Further, it could be shown that a higher effective surface area of the particles can circumvent the need for a higher filler content for obtaining convincing printing results. In addition, it was proven that, by changing the particle shape, the critical filler content for the obtained adequate printability can be altered. Preliminary in vitro biocompatibility investigations were carried out with the bioactive glass containing ink. The 3D printed ink, forming an interconnected porous scaffold, was analyzed regarding its biocompatibility in direct or indirect contact with the pre-osteoblast cell line MC3T3-E1. Both kinds of cell tests showed increased viability and a high rate of proliferation, with complete coverage of the 3D scaffolds' surface already after 7 d post cell-seeding.
Assuntos
Alginatos , Bioimpressão , Bioimpressão/métodos , Regeneração Óssea , Hidrogéis , Impressão Tridimensional , Alicerces TeciduaisRESUMO
The present study outlines a reliable approach to determining the electrical conductivity and elasticity of highly oriented electrospun conductive nanofibers of biopolymers. The highly oriented conductive fibers are fabricated by blending a high molar mass polyethylene oxide (PEO), polycaprolactone (PCL), and polylactic acid (PLA) with polyaniline (PANi) filler. The filler-matrix interaction and molar mass (M) of host polymer are among governing factors for variable fiber diameter. The conductivity as a function of filler fraction (φ) is shown and described using a McLachlan equation to reveal the electrical percolation thresholds (φc) of the nanofibers. The molar mass of biopolymer, storage time, and annealing temperature are significant factors for φc. The Young's modulus (E) of conductive fibers is dependent on filler fraction, molar mass, and post-annealing process. The combination of high orientation, tunable diameter, tunable conductivity, tunable elasticity, and biodegradability makes the presented nanofibers superior to the fibers described in previous literature and highly desirable for various biomedical and technical applications.
Assuntos
Biopolímeros/química , Nanofibras/química , Polímeros/química , Compostos de Anilina/química , Módulo de Elasticidade/fisiologia , Condutividade Elétrica , Eletricidade , Poliésteres/química , Polietilenoglicóis/química , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
We describe a technique for simultaneous quantification of the contractile forces and cytosolic calcium dynamics of muscle fibers embedded in three-dimensional biopolymer gels under auxotonic loading conditions. We derive a scaling law for linear elastic matrices such as basement membrane extract hydrogels (Matrigel) that allows us to measure contractile force from the shape of the relaxed and contracted muscle cell and the Young's modulus of the matrix without further knowledge of the matrix deformations surrounding the cell and without performing computationally intensive inverse force reconstruction algorithms. We apply our method to isolated mouse flexor digitorum brevis (FDB) fibers that are embedded in 10 mg/mL Matrigel. Upon electrical stimulation, individual FDB fibers show twitch forces of 0.37 ± 0.15 µN and tetanic forces (100-Hz stimulation frequency) of 2.38 ± 0.71 µN, corresponding to a tension of 0.44 ± 0.25 kPa and 2.53 ± 1.17 kPa, respectively. Contractile forces of FDB fibers increase in response to caffeine and the troponin-calcium stabilizer tirasemtiv, similar to responses measured in whole muscle. From simultaneous high-speed measurements of cell length changes and cytosolic calcium concentration using confocal line scanning at a frequency of 2048 Hz, we show that twitch and tetanic force responses to electric pulses follow the low-pass filtered calcium signal. In summary, we present a technically simple high-speed method for measuring contractile forces and cytosolic calcium dynamics of single muscle fibers. We expect that our method will help to reduce preparation time, costs, and the number of sacrificed animals needed for experiments such as drug testing.
Assuntos
Microscopia , Tração , Animais , Cálcio , Estimulação Elétrica , Camundongos , Contração Muscular , Fibras Musculares Esqueléticas , Músculo EsqueléticoRESUMO
Alginate dialdehyde-gelatin (ADA-GEL) hydrogels have been reported to be suitable matrices for cell encapsulation. In general, application of ADA-GEL as bioink has been limited to planar structures due to its low viscosity. In this work, ring shaped constructs of ADA-GEL hydrogel were fabricated by casting the hydrogel into sacrificial molds which were 3D printed from 9% methylcellulose and 5% gelatin. Dissolution of the supporting structure was observed during the 1st week of sample incubation. In addition, the effect of different crosslinkers (Ba2+ and Ca2+) on the physicochemical properties of ADA-GEL and on the behavior of encapsulated MG-63 cells was investigated. It was found that Ba2+ crosslinked network had more than twice higher storage modulus, and mass decrease to 70% during incubation compared to 42% in case of hydrogels crosslinked with Ca2+. In addition, faster increase in cell viability during incubation and earlier cell network formation were observed after Ba2+ crosslinking. No negative effects on cell activity due to the use of sacrificial materials were observed. The approach presented here could be further developed for cell-laden ADA-GEL bioink printing into complex 3D structures.
Assuntos
Aldeídos/química , Alginatos/química , Gelatina/química , Hidrogéis/química , Impressão Tridimensional , Bário/química , Bioimpressão , Cálcio/química , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Reagentes de Ligações Cruzadas/química , Humanos , Engenharia Tecidual , Alicerces Teciduais/química , ViscosidadeRESUMO
Capsular contracture remains a challenge in plastic surgery and represents one of the most common postoperative complications following alloplastic breast reconstruction. The impact of the surface structure of silicone implants on the foreign body reaction and the behaviour of connective tissue-producing cells has already been discussed. The aim of this study was to investigate different pore sizes of silicone surfaces and their influence on human fibroblasts in an in vitro model. Four different textures (no, fine, medium and coarse texture) produced with the salt-loss technique, have been assessed in an in vitro model. Human fibroblasts were seeded onto silicone sheets and evaluated after 1, 4 and 7 days microscopically, with viability assay and gene expression analysis. Comparing the growth behaviour and adhesion of the fibroblasts on the four different textures, a dense cell layer, good adhesion and bridge-building ability of the cells could be observed for the fine and medium texture. Cell number and viability of the cells were increasing during the time course of experiments on every texture. TGFß1 was lowest expressed on the fine and medium texture indicating a trend for decreased fibrotic activity. For silicone surfaces produced with the salt-loss technique, we were able to show an antifibrotic effect of smaller sized pores. These findings underline the hypothesis of a key role of the implant surface and the pore size and pore structure in preventing capsular contracture.
Assuntos
Materiais Biocompatíveis , Fibroblastos/fisiologia , Teste de Materiais , Silicones/química , Propriedades de Superfície , Técnicas de Cultura de Células , HumanosRESUMO
INTRODUCTION: Bacterial contamination is hypothesized to be one reason for the development of capsular contracture after alloplastic breast reconstruction using silicone breast implants. The role of fungal colonization or infection in this context as well as the question if microorganisms can penetrate the shell of silicone breast implants remains an unresolved question to date. Therefore, the aim of this study was to assess whether fungal spores are able to penetrate the shell of silicone implants. MATERIALS AND METHODS: In an experimental in vitro setup with different arrangements of growth compartments, silicone chambers were placed in culture dishes filled with Aspergillus minimal medium or liquid culture medium. Inoculation was performed with conidia of Aspergillus fumigatus and incubated for seven days. On a daily basis, plates were inspected for conidial germination and hyphal growth. RESULTS: In none of the different experimental settings nutrients or hyphae of Aspergillus fumigatus were able to penetrate the silicone material. CONCLUSIONS: Fungal spores and hyphae do not permeate through an intact silicone shell used in breast implants; thus, the silicone material serves as an impenetrable barrier.
Assuntos
Implantes de Mama , Mamoplastia , Aspergillus fumigatus , Humanos , Géis de Silicone , Silicones , Esporos FúngicosRESUMO
Anisotropic ternary composites comprising poly(methy-methacrylate) (PMMA), carbon black (CB), and carbon nanotubes (CNTs) were extruded using a capillary rheometer and the electrical conductivities of the composites were measured and presented in a detailed contour plot covering a large range of filler fractions (up to 30 vol% CNTs, 20 vol% CB). A recent generic conductivity model for ternary composites was successfully validated using the conductivity measurements. When analyzing the conductivity measurements using four traditional definitions of 'synergy' between two conductive fillers, no clear synergetic effect was observed between CB and CNT. Also, when all the conductivity data for ternary CNT/CB composites from the existing literature was carefully gathered and analyzed, the number of confirmed occurrences of strong and convincing CNT/CB synergies was surprisingly low. Finally, a novel definition of synergy based on the physical aspect, in particular, its maximum, the 'synergasm', was defined in order to obtain a more precise instrument for revealing regions of potential synergy.
RESUMO
BACKGROUND: The creation of functional skeletal muscle via tissue engineering holds great promise without sacrificing healthy donor tissue. Different cell types have been investigated regarding their myogenic differentiation potential under the influence of various media supplemented with growth factors. Yet, most cell cultures include the use of animal sera, which raises safety concerns and might lead to variances in results. Electrospun nanoscaffolds represent suitable matrices for tissue engineering of skeletal muscle, combining both biocompatibility and stability. We therefore aimed to develop a serum-free myogenic differentiation medium for the co-culture of primary myoblasts (Mb) and mesenchymal stromal cells derived from the bone marrow (BMSC) and adipose tissue (ADSC) on electrospun poly-ε-caprolacton (PCL)-collagen I-nanofibers. RESULTS: Rat Mb were co-cultured with rat BMSC (BMSC/Mb) or ADSC (ADSC/Mb) two-dimensionally (2D) as monolayers or three-dimensionally (3D) on aligned PCL-collagen I-nanofibers. Differentiation media contained either AIM V, AIM V and Ultroser® G, DMEM/Ham's F12 and Ultroser® G, or donor horse serum (DHS) as a conventional differentiation medium. In 2D co-culture groups, highest upregulation of myogenic markers could be induced by serum-free medium containing DMEM/Ham's F12 and Ultroser® G (group 3) after 7 days. Alpha actinin skeletal muscle 2 (ACTN2) was upregulated 3.3-fold for ADSC/Mb and 1.7-fold for BMSC/Mb after myogenic induction by group 3 serum-free medium when compared to stimulation with DHS. Myogenin (MYOG) was upregulated 5.2-fold in ADSC/Mb and 2.1-fold in BMSC/Mb. On PCL-collagen I-nanoscaffolds, ADSC showed a higher cell viability compared to BMSC in co-culture with Mb. Myosin heavy chain 2, ACTN2, and MYOG as late myogenic markers, showed higher gene expression after long term stimulation with DHS compared to serum-free stimulation, especially in BMSC/Mb co-cultures. Immunocytochemical staining with myosin heavy chain verified the presence of a contractile apparatus under both serum free and standard differentiation conditions. CONCLUSIONS: In this study, we were able to myogenically differentiate mesenchymal stromal cells with myoblasts on PCL-collagen I-nanoscaffolds in a serum-free medium. Our results show that this setting can be used for skeletal muscle tissue engineering, applicable to future clinical applications since no xenogenous substances were used.
Assuntos
Diferenciação Celular , Técnicas de Cocultura/métodos , Colágeno/metabolismo , Células-Tronco Mesenquimais/citologia , Mioblastos/citologia , Actinina , Animais , Proliferação de Células , Sobrevivência Celular , Células Cultivadas , Técnicas de Cocultura/instrumentação , Meios de Cultura Livres de Soro/química , Meios de Cultura Livres de Soro/metabolismo , Células-Tronco Mesenquimais/metabolismo , Desenvolvimento Muscular , Músculo Esquelético/citologia , Músculo Esquelético/metabolismo , Mioblastos/metabolismo , Poliésteres , Ratos , Engenharia Tecidual , Alicerces Teciduais/químicaRESUMO
Blends of carbon black (CB)-filled co-continuous immiscible polystyrene/poly(methyl-methacrylate) (PS/PMMA) with a PS/PMMA ratio of 50/50 and CB selectively located in the PS phase have been prepared by melt blending. The simultaneous evolution of conductivity and phase morphology of blend composites was investigated under shear and in the quiescent state at 200 °C. It was found that shear deformation had a significant influence on the conductivity of the unfilled PS/PMMA blend and its composites, which was attributed to the change of phase morphology during shear. After the shear stress of 10 kPa, the conductivity of PS/PMMA blends filled with 2 vol% of CB decreased by about two orders of magnitude and the phase morphology transformed from a fine co-continuous structure into a highly elongated lamellar structure. The deformation of phase morphology and the decrease of conductivity were weakened upon decreasing the shear stress or increasing the CB concentration. During subsequent recovery, pronounced phase structure coarsening was observed in the mixture and the conductivity increased as well. A simple model describing the behavior of conductivity under shear deformation was derived and utilized for the description of the experimental data. For the first time, the Burgers model was used to describe the conductivity, and the viscoelastic and viscoplastic parameters were deduced by fitting the conductivity under shear. The results obtained in this study provide a deeper insight into the evolution of phase structure in the conductive polymer blend composite induced by shear deformation.
RESUMO
Poly-3-hydroxybutyrate (P3HB) is a biodegradable polyester produced mainly by bacterial fermentation in an isotactic configuration. Its high crystallinity (about 70%) and brittle behavior have limited the process window and the application of this polymer in different sectors. Atactic poly-3-hydroxybutyrate (a-P3HB) is an amorphous polymer that can be synthesized chemically and blended with the isotactic P3HB to reduce its crystallinity and improve its processability Ring-opening polymerization (ROP) is the most cited synthesis route for this polymer in the literature. In this work, a new synthesis route of a-P3HB by self-polycondensation of racemic ethyl 3-hydroxybutyrate will be demonstrated. Different catalysts were tested regarding their effectiveness, and the reaction parameters were optimized using titanium isopropoxide as the catalyst. The resulting polymers were compared by self-polycondensation for their properties with those of a-P3HB obtained by the ROP and characterized by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC), and the double bond content (DBC) was determined by UV-VIS spectroscopy by using 3-butenoic acid as a standard. Additionally, a life cycle analysis (LCA) of the new method of synthesizing has been carried out to assess the environmental impact of a-P3HB.
RESUMO
In skeletal muscle tissue engineering, innervation and vascularization play an essential role in the establishment of functional skeletal muscle. For adequate three-dimensional assembly, biocompatible aligned nanofibers are beneficial as matrices for cell seeding. The aim of this study was to analyze the impact of Schwann cells (SC) on myoblast (Mb) and adipogenic mesenchymal stromal cell (ADSC) cocultures on poly-É-caprolactone (PCL)-collagen I-nanofibers in vivo. Human Mb/ADSC cocultures, as well as Mb/ADSC/SC cocultures, were seeded onto PCL-collagen I-nanofiber scaffolds and implanted into the innervated arteriovenous loop model (EPI loop model) of immunodeficient rats for 4 weeks. Histological staining and gene expression were used to compare their capacity for vascularization, immunological response, myogenic differentiation, and innervation. After 4 weeks, both Mb/ADSC and Mb/ADSC/SC coculture systems showed similar amounts and distribution of vascularization, as well as immunological activity. Myogenic differentiation could be observed in both groups through histological staining (desmin, myosin heavy chain) and gene expression (MYOD, MYH3, ACTA1) without significant difference between groups. Expression of CHRNB and LAMB2 also implied neuromuscular junction formation. Our study suggests that the addition of SC did not significantly impact myogenesis and innervation in this model. The implanted motor nerve branch may have played a more significant role than the presence of SC.
Assuntos
Nanofibras , Alicerces Teciduais , Ratos , Humanos , Animais , Engenharia Tecidual/métodos , Diferenciação Celular , Músculo Esquelético , Colágeno Tipo I/metabolismo , Desenvolvimento Muscular/genéticaRESUMO
In the context of tissue engineering, biofabrication techniques are employed to process cells in hydrogel-based matrices, known as bioinks, into complex 3D structures. The aim is the production of functional tissue models or even entire organs. The regenerative production of biological tissues adheres to a multitude of criteria that ultimately determine the maturation of a functional tissue. These criteria are of biological nature, such as the biomimetic spatial positioning of different cell types within a physiologically and mechanically suitable matrix, which enables tissue maturation. Furthermore, the processing, a combination of technical procedures and biological materials, has proven highly challenging since cells are sensitive to stress, for example from shear and tensile forces, which may affect their vitality. On the other hand, high resolutions are pursued to create optimal conditions for subsequent tissue maturation. From an analytical perspective, it is prudent to first investigate the printing behavior of bioinks before undertaking complex biological tests. According to our findings, conventional shear rheological tests are insufficient to fully characterize the printing behavior of a bioink. For this reason, we have developed optical methods that, complementarily to the already developed tests, allow for quantification of printing quality and further viscoelastic modeling of bioinks.