RESUMO
Low-loss photonic integrated circuits (PICs) are the key elements in future quantum technologies, nonlinear photonics and neural networks. The low-loss photonic circuits technology targeting C-band application is well established across multi-project wafer (MPW) fabs, whereas near-infrared (NIR) PICs suitable for the state-of-the-art single-photon sources are still underdeveloped. Here, we report the labs-scale process optimization and optical characterization of low-loss tunable photonic integrated circuits for single-photon applications. We demonstrate the lowest propagation losses to the date (as low as 0.55â dB/cm at 925â nm wavelength) in single-mode silicon nitride submicron waveguides (220×550â nm). This performance is achieved due to advanced e-beam lithography and inductively coupled plasma reactive ion etching steps which yields waveguides vertical sidewalls with down to 0.85â nm sidewall roughness. These results provide a chip-scale low-loss PIC platform that could be even further improved with high quality SiO2 cladding, chemical-mechanical polishing and multistep annealing for extra-strict single-photon applications.
RESUMO
In our recent paper [D. P. Kulikova Opt. Express28(21), 32049 (2020).10.1364/OE.405403], an early version of Fig. 1 was published. This erratum corrects that error.
RESUMO
In recent years, we have been witnessing the intensive development of optical gas sensors. Thin palladium and platinum films as well as tungsten trioxide films with palladium or platinum catalysts are widely used for hydrogen detection, and the optical constants of these materials are required for sensor development. We report the optical parameters retrieved from a set of ellipsometric and transmission spectra for electron-beam evaporated palladium, platinum, and tungsten trioxide films. The tungsten trioxide films were 81 nm, 162 nm, and 515 nm thick and the metal films were as thin as 5-7 nm. Ultrathin palladium and platinum films were shown to be successfully described by local and isotropic permittivity, which is quite different from known bulk values. However, this permittivity showed a strong dependence on adjacent materials, thus illustrating that the ultrathin metallic films can be considered composites characterized by effective permittivity. With the obtained refractive indices and permittivities, the optical spectra of fabricated WO3/Pd and WO3/Pt nanostructures incorporating 1D grating of Al2O3 were in an excellent agreement with the calculated ones without requiring any additional fitting procedures or inclusion of surface roughness layers in numerical models.