Strategies for reducing greenhouse gas emissions from municipal solid waste management in Pakistan.

The studies on municipal solid waste (MSW) management in Pakistan and its impacts on greenhouse gas (GHG) emissions are glaringly missing. Therefore, this study examines the effect of MSW management on GHG emissions in Pakistan and suggests the best suitable strategies for alleviating GHG emissions. The Intergovernmental Panel on Climate Change (IPCC) 2006 waste model (WM) was used to create inventory of GHG emissions from landfilling. The solid waste management GHG (SWM-GHG) calculator and strengths-weaknesses-opportunities-threat (SWOT) analyses were used as strategic planning tools to reduce GHG emissions by improving MSW management in Pakistan. The IPCC 2006 WM estimated 14,987,113 metric tonnes (Mt) carbon dioxide equivalents (CO2-eq) of GHG emissions in 2016. The SWM-GHG calculator, on the other hand, estimated 23,319,370 Mt CO2-eq of GHG emissions from management of 30,764,000 Mt of MSW in 2016, which included 8% recycling, 2% composting, and 90% disposal in open dumps. To reduce GHG emissions, two strategies including recycling-focused and incineration-focused were analysed. The recycling approach can reduce more GHG emissions than incineration, as it can reduce 36% of GHG emissions (as compared to GHG emission in 2016) by recycling 23% of MSW, anaerobically digesting 10% of MSW, and disposing of 67% of MSW in sanitary landfills (with energy recovery). Moreover, the SWOT analysis suggested integration of the informal sector, adoption of anaerobic digestion and formulation of explicit MSW regulations for improving the current management of MSW which will also result in lower GHG emissions.

Worldwide distribution and abundance of microplastic: How dire is the situation?

The widespread occurrence of microplastic has invaded the environment to an extent that it appears to be present throughout the globe. This review investigated the global abundance and distribution of microplastics in marine and freshwater ecosystems. Furthermore, the issues and challenges have been addressed for better findings in microplastics studies. Findings revealed that the accumulation of microplastics varies geographically, with locations, hydrodynamic conditions, environmental pressure, and time. From this review, it is crucial that proper regulations are proposed and implemented in order to reduce the occurrence of microplastics in the aquatic environment. Without appropriate law and regulations, microplastic pollution will eventually threaten human livelihood.

Beneath the surface: Exploring microplastic intricacies in Anadara granosa.

Anadara granosa or blood cockles have been reported to be a candidate for biomonitoring agents due to their sedimentary nature and their nutrient uptake mechanisms. Yet, this bivalve is still regarded as a delicacy in Asian cuisine. Malaysia is the largest exporter of this sea product that contaminated cockles may also be experienced by the importing countries. However, the bioaccumulation of microplastics in A. granosa cultivated in Malaysia has not been extensively studied. It is crucial to comprehend the risk posed to humans by consuming A. granosa in their diet. Therefore, the purpose of this research is to investigate the levels of microplastic accumulation in A. granosa from major exporters in Peninsular Malaysia, to evaluate the associated risk of microplastics on the species, and to estimate daily human consumption of microplastics through the consumption of A. granosa. The abundance of microplastics was quantified through the use of a stereo microscope, and the polymer type was determined using FTIR and micro-FTIR. Findings from this investigation revealed that all samples of A. granosa were contaminated with microplastics, with the highest levels of accumulation found in bivalves collected from the west coast (0.26 ± 0.15 particles/g) of Peninsular Malaysia. Fragment and fiber microplastics, measuring between 0.05 and 0.1 mm in size, were found to be the most prevalent in A. granosa, with blue being the dominant identified colour and rayon being the most common polymer type. Microplastic risk assessment due to the presence of polyacrylate, polycarbonate (PC), and polymethyl methacrylate (PMMA) resulted in a high risk of contamination for A. granosa. It was further determined that the current estimated dietary intake (EDI) suggests that consumers of A. granosa uptake approximately 21.8-93.5 particles/person/year of microplastics. This study highlights that A. granosa accumulates microplastics, which could potentially result in bioaccumulation and biomagnification in humans through consumption.

Valorisation of keratinous wastes: A sustainable approach towards a circular economy.

The valorisation of keratinous wastes involves biorefining and recovering the bioresource materials from the keratinous wastes to produce value-added keratin-based bioproducts with a broad application, distribution, and marketability potential. Valorisation of keratinous wastes increases the value of the wastes and enables more sustainable waste management towards a circular bioeconomy. The abundance of keratinous wastes as feedstock from agro-industrial processing, wool processing, and grooming industry benefits biorefinery and extraction of keratins, which could be the optimal solution for developing an ecologically and economically sustainable keratin-based economy. The transition from the current traditional linear models that are deleterious to the environment, which end energy and resources recovery through disposal by incineration and landfilling, to a more sustainable and closed-loop recycling and recovery approach that minimises pollution, disposal challenges, loss of valuable bioresources and potential revenues are required. The paper provides an overview of keratinous wastes and the compositional keratin proteins with the descriptions of the various keratin extraction methods in biorefinery and functional material synthesis, including enzymatic and microbial hydrolysis, chemical hydrolysis (acid/alkaline hydrolysis, dissolution in ionic liquids, oxidative and sulphitolysis) and chemical-free hydrolysis (steam explosion and ultrasonic). The study describes various uses and applications of keratinases and keratin-based composites fabricated through various manufacturing processes such as lyophilisation, compression moulding, solvent casting, hydrogel fabrication, sponge formation, electrospinning, and 3D printing for value-added applications.

Priorities to inform research on marine plastic pollution in Southeast Asia.

Southeast Asia is considered to have some of the highest levels of marine plastic pollution in the world. It is therefore vitally important to increase our understanding of the impacts and risks of plastic pollution to marine ecosystems and the essential services they provide to support the development of mitigation measures in the region. An interdisciplinary, international network of experts (Australia, Indonesia, Ireland, Malaysia, the Philippines, Singapore, Thailand, the United Kingdom, and Vietnam) set a research agenda for marine plastic pollution in the region, synthesizing current knowledge and highlighting areas for further research in Southeast Asia. Using an inductive method, 21 research questions emerged under five non-predefined key themes, grouping them according to which: (1) characterise marine plastic pollution in Southeast Asia; (2) explore its movement and fate across the region; (3) describe the biological and chemical modifications marine plastic pollution undergoes; (4) detail its environmental, social, and economic impacts; and, finally, (5) target regional policies and possible solutions. Questions relating to these research priority areas highlight the importance of better understanding the fate of marine plastic pollution, its degradation, and the impacts and risks it can generate across communities and different ecosystem services. Knowledge of these aspects will help support actions which currently suffer from transboundary problems, lack of responsibility, and inaction to tackle the issue from its point source in the region. Being profoundly affected by marine plastic pollution, Southeast Asian countries provide an opportunity to test the effectiveness of innovative and socially inclusive changes in marine plastic governance, as well as both high and low-tech solutions, which can offer insights and actionable models to the rest of the world.

Immobilization of Pb, Cd, and Zn in a contaminated soil using eggshell and banana stem amendments: metal leachability and a sequential extraction study.

Heavy-metal-contaminated soil is one of the major environmental pollution issues all over the world. In this study, two low-cost amendments, inorganic eggshell and organic banana stem, were applied to slightly alkaline soil for the purpose of in situ immobilization of Pb, Cd, and Zn. The artificially metal-contaminated soil was treated with 5% eggshell or 10% banana stem. To simulate the rainfall conditions, a metal leaching experiment for a period of 12 weeks was designed, and the total concentrations of the metals in the leachates were determined every 2 weeks. The results from the metal leaching analysis revealed that eggshell amendment generally reduced the concentrations of Pb, Cd, and Zn in the leachates, whereas banana stem amendment was effective only on the reduction of Cd concentration in the leachates. A sequential extraction analysis was carried out at the end of the experiment to find out the speciation of the heavy metals in the amended soils. Eggshell amendment notably decreased mobility of Pb, Cd, and Zn in the soil by transforming their readily available forms to less accessible fractions. Banana stem amendment also reduced exchangeable form of Cd and increased its residual form in the soil.