RESUMO
Monitoring of volatile organic compounds (VOCs) in air is crucial for understanding their atmospheric impacts and advancing their emission reduction plans. This study presents an innovative integrated methodology suitable for achieving semireal-time high spatiotemporal resolution three-dimensional measurements of VOCs from ground to hundreds of meters above ground. The methodology integrates an active AirCore sampler, custom-designed for deployment from unmanned aerial vehicles (UAV), a proton-transfer-reaction mass spectrometry (PTR-MS) for sample analysis, and a data deconvolution algorithm for improved time resolution for measurements of multiple VOCs in air. The application of the deconvolution technique significantly improves the signal strength of data from PTR-MS analysis of AirCore samples and enhances their temporal resolution by 4 to 8 times to 4-11 s. A case study demonstrates that the methodology can achieve sample collection and analysis of VOCs within 45 min, resulting in >120-360 spatially resolved data points for each VOC measured and achieving a horizontal resolution of 20-55 m at a UAV flight speed of 5 m/s and a vertical resolution of 5 m. This methodology presents new possibilities for acquiring 3-dimensional spatial distributions of VOC concentrations, effectively tackling the longstanding challenge of characterizing three-dimensional VOC distributions in the lowest portion of the atmospheric boundary layer.
Assuntos
Poluentes Atmosféricos , Monitoramento Ambiental , Compostos Orgânicos Voláteis , Compostos Orgânicos Voláteis/análise , Monitoramento Ambiental/métodos , Poluentes Atmosféricos/análise , Espectrometria de Massas/métodos , Algoritmos , AeronavesRESUMO
Cold heavy oil production with sand (CHOPS) is an extraction process for heavy oil in Canada, with the potential to lead to higher CH4 venting than conventional oil sites, that have not been adequately characterized. In order to quantify CH4 emissions from CHOPS activities, a focused aerial measurement campaign was conducted in the Canadian provinces of Alberta and Saskatchewan in June 2018. Total CH4 emissions from each of 10 clusters of CHOPS wells (containing 22-167 well sites per cluster) were derived using a mass balance computation algorithm that uses in situ wind data measurement on board aircraft. Results show that there is no statistically significant difference in CH4 emissions from CHOPS wells between the two provinces. Cluster-aggregated emission factors (EF) were determined using correspondingly aggregated production volumes. The average CH4 EF was 70.4 ± 36.9 kg/m3 produced oil for the Alberta wells and 55.1 ± 13.7 kg/m3 produced oil for the Saskatchewan wells. Using these EF and heavy oil production volumes reported to provincial regulators, the annual CH4 emissions from CHOPS were estimated to be 121% larger than CHOPS emissions extracted from Canada's National Inventory Report (NIR) for Saskatchewan. The EF were found to be positively correlated with the percentage of nonpiped production volumes in each cluster, indicating higher emissions for nonpiped wells while suggesting an avenue for methane emission reductions. A comparison with recent measurements indicates relatively limited effectiveness of regulations for Saskatchewan compared to those in Alberta. The results of this study indicate the substantial contribution of CHOPS operations to the underreporting observed in the NIR and provide measurement-based EF that can be used to develop improved emissions inventories for this sector and mitigate CH4 emissions from CHOPS operations.
RESUMO
This paper focuses on the speed control of a permanent magnet synchronous motor (PMSM) for electric drives with model uncertainties and external disturbances. Conventional sliding mode control (CSMC) can only converge asymptotically in the infinite domain and will cause unacceptable sliding mode chattering. To improve the performance of the PMSM speed loop in terms of response speed, tracking accuracy, and robustness, a hybrid control strategy for a fixed-time-convergent sliding mode controller (FSMC) with a fixed-time-convergent sliding mode observer (FSMO) is proposed for PMSM speed regulation using the fixed-time control theory. Firstly, the FSMC is proposed to improve the convergence speed and robustness of the speed loop, which can converge to the origin within a fixed time independent of the initial conditions. Then, the FSMO is used as a compensator to further enhance the robustness of the speed loop and attenuate sliding mode chattering. Finally, simulation and experimental results show that the proposed method can effectively improve the dynamic performance and robustness of the PMSM speed control system.
RESUMO
Background: Inflammation and cardiac fibrosis are important pathogenic drivers of heart failure. The fibrosis-4 index (FIB-4) is associated with a higher degree of fibrosis. The systemic immune inflammation index (SII) is associated with a higher degree of systemic inflammation status. Previous studies have shown that they are associated with a poor prognosis for cardiovascular disease. We sought to investigate the value of FIB-4 combined with the SII as a novel inflammation-fibrosis combined index (IFCI) in predicting left ventricular reverse remodeling (LVRR) and prognosis among reduced ejection fraction heart failure (HFrEF) patients. Methods: A total of 895 patients with HFrEF were continuously recruited. Receiver operating characteristic curves were drawn to assess the abilities of inflammation-fibrosis indicators to predict LVRR. Multivariable Cox regression analysis was used to examine independent predictors of composite cardiac events and all-cause death. Results: After six months of follow-up, 344 (38.4%) patients experienced LVRR. The IFCI had the largest area under the curve (0.835, P < 0.001). In multivariate-adjusted logistic regression analyses, FIB-4, SII, and IFCI were predictive of LVRR (P value < 0.05). The IFCI was associated with a 3.686-fold higher risk of non-LVRR (odds ratio [OR] = 3.686, P < 0.001). Moreover, an increased IFCI predicted a poor prognosis in HFrEF patients. The highest risk of composite cardiac events (hazard ratio [HR] = 2.716, P < 0.001) was observed in the top IFCI-tertile group, and similar results were found regarding independent risk indicators of all-cause death. Conclusion: In summary, this study indicated that increased IFCI at admission offers good predictability regarding non-LVRR and predicts the risk of all-cause mortality or composite cardiovascular events due to HFrEF patients and could be used as a novel marker.
RESUMO
Two-dimensional materials possess a large number of interesting and important properties. Various methods have been developed to assemble two-dimensional aggregates. Assembly of colloidal particles can be achieved with laser-heating-induced thermal convective flow. In this paper, an opto-hydrodynamic binding method is proposed to assemble colloidal particles dispersed in a solution into multilayer structures. First, we use polystyrene (PS) microspheres to study the feasibility and characteristics of the assembly method. PS microspheres and monodispersed magnetic silica microspheres (SLEs) are dispersed in a solution to form a binary mixture system. Under the action of an external uniform magnetic field, SLEs in the solution form chains. An SLE chain is heated by a laser beam. Due to the photothermal effect, the SLE chain is heated to produce a thermal gradient, resulting in thermal convection. The thermal convection drives the PS beads to move toward the heated SLE chain and finally stably assemble into multilayer aggregates on both sides of the SLE chain. The laser power affects the speed and result of the assembly. When the laser power is constant, the degree of constraint of the PS microbeads in different layers is also different. At the same time, this method can also assemble the biological cells, and the spacing of different layers of cells can be changed by changing the electrolyte concentration of the solution. Our work provides an approach to assembling colloidal particles and cells, which has a potential application in the analysis of the collective dynamics of microparticles and microbes.
RESUMO
Point-of-care testing (POCT) plays an increasingly important role in biomedical research and health care. Quantitative phase microscopes (QPMs) with good contrast, no invasion, no labeling, high speed and automation could be effectively applied for POCT. However, most QPMs are fixed on the optical platform with bulky size, lack of timeliness, which remained challenging in POCT solutions. In this paper, we proposed a plug-and-play QPM with multimode imaging based on the quantitative differential phase contrast (qDPC) method. The system employs a programmable LED array as the light source and uses the GPU to accelerate the calculation, which can realize multi-contrast imaging with six modes. Accurate phase measurement and real-time phase imaging are implemented by the proposed qDPC algorithms for quantitative phase targets and biomedical samples. A 3D electric control platform is designed for mechanical control of field of view and focusing without manual operations. The experimental results verify the robustness and high performance of the setup. Even a rookie could finish the POCT scheme for biomedical applications at the scene using the QPM with a compact size of 140 × 165 × 250 mm3.
RESUMO
Optofluidic regulation of blood microflow in vivo represents a significant method for investigating illnesses linked to abnormal changes in blood circulation. Currently, non-invasive strategies are limited to regulation within capillaries of approximately 10 µm in diameter because the adaption to blood pressure levels in the order of several hundred pascals poses a significant challenge in larger microvessels. In this study, using laser-induced microbubble formation within microvessels of the mouse auricle, we regulate blood microflow in small vessels with diameters in the tens of micrometers. By controlling the laser power, we can control the growth and stability of microbubbles in vivo. This controlled approach enables the achievement of prolonged ischemia and subsequent reperfusion of blood flow, and it can also regulate the microbubbles to function as micro-pumps for reverse blood pumping. Furthermore, by controlling the microbubble, narrow microflow channels can be formed between the microbubbles and microvessels for assessing the apparent viscosity of leukocytes, which is 76.9 ± 11.8 Pa·s in the in vivo blood environment. The proposed design of in vivo microbubble valves opens new avenues for constructing real-time blood regulation and exploring cellular mechanics within living organisms.
Assuntos
Lasers , Microbolhas , Microvasos , Animais , Camundongos , Microvasos/fisiologiaRESUMO
Importance: Post-stroke sialorrhea (PSS) refers to excessive saliva flowing out the lip border after a stroke. PSS negatively affects patient self-image and social communication and may lead to depression. Limited evidence supports the link between excessive salivation and PSS. No large-scale, strictly controlled randomized controlled trials have shown the effectiveness of acupuncture in treating PSS patients. Objective: We aim to compare the effects of intraoral and sham acupuncture in PSS patients and explore relationships among salivation and drooling severity and frequency and swallowing function in stroke patients. Design: Clinical study protocol, SPIRIT compliant. Setting: Prospective, single-center, randomized, and sham-controlled trial. Population: We will recruit 106 PSS patients to receive 4-week intraoral or sham acupuncture. Additionally, 53 stroke patients without PSS will undergo a conventional 4-week treatment program to compare salivation between PSS and non-PSS patients. Exposures: Intraoral or sham acupuncture. Main Outcomes and Measures: The main evaluation index will be the 3-minute saliva weight (3MSW), comparing changes in 3MSW from baseline to weeks 4 and 8. Secondary assessment indices will include the "Drooling Severity and Frequency Scale" and "Functional Oral Intake Scale." Results: The results from this study will be published in peer-reviewed journals. Conclusion: Comparing effects of intraoral and sham acupuncture in PSS patients, this study may contribute important evidence for future PSS treatment and provide valuable insights into whether salivation issues in stroke patients are attributed to heightened salivary secretion or dysphagia.
Assuntos
Terapia por Acupuntura , Sialorreia , Acidente Vascular Cerebral , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Terapia por Acupuntura/métodos , Estudos Prospectivos , Ensaios Clínicos Controlados Aleatórios como Assunto , Salivação , Sialorreia/terapia , Sialorreia/etiologia , Acidente Vascular Cerebral/complicações , Acidente Vascular Cerebral/terapia , Acidente Vascular Cerebral/fisiopatologiaRESUMO
Urban environments are recognized as main anthropogenic contributors to greenhouse gas (GHG) emissions, characterized by unevenly distributed emission sources over the urban environments. However, spatial GHG distributions in urban regions are typically obtained through monitoring at only a limited number of locations, or through model studies, which can lead to incomplete insights into the heterogeneity in the spatial distribution of GHGs. To address such information gap and to evaluate the spatial representation of a planned GHG monitoring network, a custom-developed atmospheric sampler was deployed on a UAV platform in this study to map the CO2 and CH4 mixing ratios in the atmosphere over Zhengzhou in central China, a megacity of nearly 13 million people. The aerial survey was conducted along the main roads at an altitude of 150 m above ground, covering a total distance of 170 km from the city center to the suburbs. The spatial distributions of CO2 and CH4 mixing ratios in Zhengzhou exhibited distinct heterogeneities, with average mixing ratios of CO2 and CH4 at 439.2 ± 10.8 ppm and 2.12 ± 0.04 ppm, respectively. A spatial autocorrelation analysis was performed on the measured GHG mixing ratios across the city, revealing a spatial correlation range of approximately 2 km for both CO2 and CH4 in the urban area. Such a spatial autocorrelation distance suggests that the urban GHG monitoring network designed for emission inversion purposes need to have a spatial resolution of 4 km to characterize the spatial heterogeneities in the GHGs. This UAV-based measurement approach demonstrates its capability to monitor GHG mixing ratios across urban landscapes, providing valuable insights for GHG monitoring network design.
RESUMO
Anthropogenic organic carbon emissions reporting has been largely limited to subsets of chemically speciated volatile organic compounds. However, new aircraft-based measurements revealed total gas-phase organic carbon emissions that exceed oil sands industry-reported values by 1900% to over 6300%, the bulk of which was due to unaccounted-for intermediate-volatility and semivolatile organic compounds. Measured facility-wide emissions represented approximately 1% of extracted petroleum, resulting in total organic carbon emissions equivalent to that from all other sources across Canada combined. These real-world observations demonstrate total organic carbon measurements as a means of detecting unknown or underreported carbon emissions regardless of chemical features. Because reporting gaps may include hazardous, reactive, or secondary air pollutants, fully constraining the impact of anthropogenic emissions necessitates routine, comprehensive total organic carbon monitoring as an inherent check on mass closure.