Rational Design of Tetrahedral Derivatives as Efficient Light-Emitting Materials Based on "Super Atom" Perspective.

Traditional semiconductor quantum dots of groups II-VI are key ingredients of next-generation display technology. Yet, the majority of them contain toxic heavy-metal elements, thus calling for alternative light-emitting materials. Herein, we have explored three novel categories of multicomponent compounds, namely, tetragonal II-III2-VI4 porous ternary compounds, cubic I2-II3-VI4 ternary compounds, and cubic I-II-III3-V4 quaternary compounds. This is achieved by judicious introduction of a "super atom" perspective and concurrently varying the solid-state lattice packing of involved super atoms or the population of surrounding counter cations. Based on first-principles calculations of 392 candidate materials with designed crystal structures, 53 highly stable materials have been screened. Strikingly, 34 of them are direct-bandgap semiconductors with emitting wavelengths covering the near-infrared and visible-light regions. This work provides a comprehensive database of highly efficient light-emitting materials, which may be of interest for a broad field of optoelectronic applications.

Bright and Stable Yellow Quantum Dot Light-Emitting Diodes Through Core-Shell Nanostructure Engineering.

Solution-processed and efficient yellow quantum dot light-emitting diodes (QLEDs) are considered key optoelectronic devices for lighting, display, and signal indication. However, limited synthesis routes for yellow quantum dots (QDs), combined with inferior stress-relaxation of the core-shell interface, pose challenges to their commercialization. Herein, a nanostructure tailoring strategy for high-quality yellow CdZnSe/ZnSe/ZnS core/shell QDs using a "stepwise high-temperature nucleation-shell growth" method is introduced. The synthesized CdZnSe-based QDs effectively smoothed the release stress of the core-shell interface and revealed a near-unit photoluminescence quantum yield, with nonblinking behavior and matched energy level, which accelerated radiative recombination and charge injection balance for device operation. Consequently, the yellow CdZnSe-based QLEDs exhibited a peak external quantum efficiency of 23.7%, a maximum luminance of 686 050 cd m-2, and a current efficiency of 103.2 cd A-1, along with an operating half-lifetime of 428 523 h at 100 cd m-2. To the best of the knowledge, the luminance and operational stability of the device are found to be the highest values reported for yellow LEDs. Moreover, devices with electroluminescence (EL) peaks at 570-605 nm exhibited excellent EQEs, surpassing 20%. The work is expected to significantly push the development of RGBY-based display panels and white LEDs.

High-brightness green CdSe/ZnS quantum dots stimulated by solar-blind deep-ultraviolet light in optical wireless communications.

Ultraviolet-based optical wireless communication (OWC) is emerging as a significant technology for the next-generation secure communication, particularly within the solar-blind spectra. In this study, we have synthesized two types of green-emitting II-VI family colloidal quantum dots (QDs), specifically ZnCdSe/ZnS and CdSe/CdZnS/ZnS QDs, which are stimulated by ultraviolet (UV) and solar-blind deep-ultraviolet (DUV) light, respectively. With a transmission distance of 1.5 m, the maximum data rate of ZnCdSe/ZnS QDs reaches 40 Mb/s, which is below the forward-error-correction (FEC) limit (3.8 × 10-3) when excited by 385-nm UV light. However, both brightness and bit error rate are significantly deteriorated when excited by 280-nm DUV light. Conversely, 28 and 24 Mb/s were attained using CdSe/CdZnS/ZnS QDs under UV and DUV excitation, respectively. Our studies on light-conversion and communication capabilities of green QDs within the DUV OWC system may provide valuable insights for subsequent research in the field.

Development of a Dual Fluorescence Signal-Enhancement Immunosensor Based on Substrate Modification for Simultaneous Detection of Interleukin-6 and Procalcitonin.

High-sensitivity detection of biomarkers is of great significance to improve the accuracy of disease diagnosis and the rate of occult disease diagnosis. Using a substrate modification and two-color quantum dot (QD) nanobeads (QBs), we have developed a dual fluorescence signal-enhancement immunosensor for sensitive, simultaneous detection of interleukin 6 (IL-6) and procalcitonin (PCT) at low volumes (∼20 µL). First, the QBs compatible with QDs with different surface ligands were prepared by optimizing surfactants based on the microemulsion method. Through the use of a fluorescence-linked immunosorbent assay (FLISA), the feasibility of a dual signal-enhancement immunosensor was verified, and a 5-fold enhancement of fluorescence intensity was achieved after the directional coating of the antibodies on sulfhydryl functionalization (-SH) substrates and the preparation of QBs by using a polymer and silica double-protection method. Next, a simple polydimethylsiloxane (HS-PDMS) immunosensor with a low volume consumption was prepared. Under optimal conditions, we achieved the simultaneous detection of IL-6 and PCT with a linear range of 0.05-50 ng/mL, and the limit of detection (LOD) was 24 and 32 pg/mL, respectively. The result is comparable to two-color QBs-FLISA with a sulfhydryl microplate, even though only 20% of its volume was used. Thus, the dual fluorescence signal-enhancement HS-PDMS immunosensor offers the capability of early microvolume diagnosis of diseases, while the detection of inflammatory factors is clinically important for assisting disease diagnosis and determining disease progression.

The Narrow Synthetic Window for Highly Homogenous InP Quantum Dots toward Narrow Red Emission.

Low-toxicity InP-based quantum dots (QDs) exhibit potential for replacing Cd/Pb-containing QDs in the visible and near-infrared regions. Despite advancements, further improvement relies on synthesizing homogeneous InP QDs to achieve a high color purity. In a commonly employed two-step "seed-mediated" synthetic approach, we demonstrate the high sensitivity of InP seed sizes and size distribution to the quantities of trioctylphosphine (TOP) and tris(trimethylsilyl)phosphine [(TMS)3P], attributed to the process of "self-focusing of size distribution" and enhanced reactivity of In-oleate through coordination with TOP. During growth, the processes of size focusing and defocusing are modulated by the accumulation of oleic acid and TOP molecules, as well as the amount of (TMS)3P in the growth precursor, which may relate to the dissolution process of InP magic size clusters. Through precise control, the best valley/depth ratio of InP QDs was 0.52 at the first absorption peak at 571 nm, resulting in luminescence with a full width at half-maximum of 35 at 620 nm with an absolute photoluminescence quantum yield around 90% after heteroepitaxial growth with ZnSe and ZnS shells.

Understanding the Growth Mechanism of HgTe Colloidal Quantum Dots through Bilateral Injection.

As potential low-cost alternatives of traditional bulk HgCdTe crystals, HgTe colloidal quantum dots (CQDs) synthesized through reactions between HgCl2 and trioctylphosphine-telluride in hot oleylamine have shown promising performances in mid-wave infrared photodetectors. Tetrapodic or tetrahedral HgTe CQDs have been obtained by tuning the reaction conditions such as temperature, reaction time, concentrations, and ratios of the two precursors. However, the principles governing the growth dynamics and the mechanism behind the transitions between tetrapodic and tetrahedral HgTe CQDs have not been sufficiently understood. In this work, synthesis of HgTe CQDs through bilateral injection is introduced to study the growth mechanism. It suggests that tetrahedral HgTe CQDs usually result from the breaks of tetrapodic HgTe CQDs after their legs grow thick enough. The fundamental factor determining whether the growth makes their legs longer or thicker is the effective concentration of the Te precursor during the growth, rather than temperature, Hg-rich environment, or reactivity of precursors. A chemical model is proposed to illustrate the principles governing the growth dynamics, which provides valuable guidelines for tuning the material properties of HgTe CQDs according to the needs of applications.

Highly Sensitive, Stable InP Quantum Dot Fluorescent Probes for Quantitative Immunoassay Through Nanostructure Tailoring and Biotin-Streptavidin Coupling.

Nontoxic, highly sensitive InP quantum dot (QD) fluorescent immunoassay probes are promising biomedical detection modalities due to their unique properties. However, InP-based QDs are prone to surface oxidation, and the stability of InP QD-based probes in biocompatible environments remains a crucial challenge. Although the thick shell can provide some protection during the phase transfer process of hydrophobic QDs, the photoluminescence quantum yield (PLQY) is generally decreased because of the contradiction between lattice stress relaxation and thick shell growth. Herein, we developed thick-shell InP-based core/shell QDs by inserting a ZnSeS alloy layer. The ternary ZnSeS intermediate shell could effectively facilitate lattice stress relaxation and passivate the defect states. The synthesized InP/ZnSe/ZnSeS/ZnS core/alloy shell/shell QDs (CAS-InP QDs) with nanostructure tailoring revealed a larger size, high PLQY (90%), and high optical stability. After amphiphilic polymer encapsulation, the aqueous CAS-InP QDs presented almost constant fluorescence attenuation and stable PL intensity under different temperatures, UV radiation, and pH solutions. The CAS-InP QDs were excellent labels of the fluorescence-linked immunosorbent assay (FLISA) for detecting C-reactive protein (CRP). The biotin-streptavidin (Bio-SA) system was first introduced in the FLISA to further improve the sensitivity, and the CAS-InP QDs-based SA-Bio sandwich FLISA realized the detection of CRP with an impressive limit of detection (LOD) of 0.83 ng/mL. It is believed that the stable and sensitive InP QD fluorescent probes will drive the rapid development of future eco-friendly, cost-effective, and sensitive in vitro diagnostic kits.

Self-Assembled and Wavelength-Tunable Quantum Dot Whispering-Gallery-Mode Lasers for Backlight Displays.

Thanks to the narrow line width and high brightness, colloidal quantum dot (CQD) lasers show promising applications in next-generation displays. However, CQD laser-based displays have yet to be demonstrated because of two challenges in integrating red, green, and blue (RGB) lasers: absorption from red CQDs deteriorates the optical gain of blue and green CQDs, and imbalanced white spectra lack blue lasing due to the high lasing threshold of blue CQDs. Herein, we introduce a facile surfactant-free self-assembly method to assemble RGB CQDs into high-quality whispering-gallery-mode (WGM) RGB lasers with close lasing thresholds among them. Moreover, these RGB lasers can lase nearly independently even when they are closely integrated, and they can construct an ultrawide color space whose color gamut is 105% of that of the BT.2020 standard. These combined strategies allow us to demonstrate the first full-color liquid crystal displays using CQD lasers as the backlight source.

Ultrastable and High-Efficiency Deep Red QLEDs through Giant Continuously Graded Colloidal Quantum Dots with Shell Engineering.

Quantum dot (QD) based light-emitting diodes (QLEDs) hold great promise for next-generation lighting and displays. In order to reach a wide color gamut, deep red QLEDs emitting at wavelengths beyond 630 nm are highly desirable but have rarely been reported. Here, we synthesized deep red emitting ZnCdSe/ZnSeS QDs (diameter ∼16 nm) with a continuous gradient bialloyed core-shell structure. These QDs exhibit high quantum yield, excellent stability, and a reduced hole injection barrier. The QLEDs based on ZnCdSe/ZnSeS QDs have an external quantum efficiency above 20% in the luminance range of 200-90000 cd m-2 and a record T95 operation lifetime (time for the luminance to decrease to 95% of its initial value) of more than 20000 h at a luminance of 1000 cd m-2. Furthermore, the ZnCdSe/ZnSeS QLEDs have outstanding shelf stability (>100 days) and cycle stability (>10 cycles). The reported QLEDs with excellent stability and durability can accelerate the pace of QLED applications.

ZnF2-Assisted Synthesis of Highly Luminescent InP/ZnSe/ZnS Quantum Dots for Efficient and Stable Electroluminescence.

High-quality InP-based quantum dots (QDs) have become very promising, environmentally benign light emitters for display applications, but their synthesis generally entails hazardous hydrofluoric acid. Here, we present a highly facile route to InP/ZnSe/ZnS core/shell/shell QDs with a near-unity photoluminescence quantum yield. As the key additive, the inorganic salt ZnF2 mildly reacts with carboxylic acid at a high temperature and in situ generates HF, which eliminates surface oxide impurities, thus facilitating epitaxial shell growth. The resulting InP/ZnSe/ZnS QDs exhibit a narrower emission line width and better thermal stability in comparison with QDs synthesized with hydrofluoric acid. Light-emitting diodes using large-sized InP/ZnSe/ZnS QDs without replacing original ligands achieve the highest peak external quantum efficiency of 22.2%, to the best of our knowledge, along with a maximum brightness of >110 000 cd/m2 and a T95 lifetime of >32 000 h at 100 cd/m2. This safe approach is anticipated to be applied for a wide range of III-V QDs.

Size Engineering of Trap Effects in Oxidized and Hydroxylated ZnSe Quantum Dots.

Environmentally friendly blue-emitting ZnSe quantum dots (QDs) are in high demand for next-generation light-emitting devices. Yet, they suffer longstanding optical instability issues under aerobic conditions. Herein, we have demonstrated the existence of oxidization or hydroxylation on the QD surface when QDs are subjected to oxygen exposure, which potentially introduces highly localized in-gap states. Those states result in a dense number of surface-related, weak-intensity "dark" exciton states at the emission edge. Remarkably, there exists a critical diameter (Dc ≈ 8.5 nm) at which the deepest trap level reaches resonance with the highest occupied molecular orbital state. Beyond this critical diameter, the effects of those trap states are minimized, and the emission edge is dominated by high-intensity, bulk-to-bulk-like "bright" exciton states. The present work provides a novel strategy for designing highly stable QD emitters via size engineering, which are broadly applicable to other closely related QD systems.

Evaluating Lead Halide Perovskite Nanocrystals as a Spin Laser Gain Medium.

Spin-polarized charge endows conventional lasers with not only new functionalities but also reduced lasing thresholds thanks to the lifting of spin degeneracy. II-VI and III-V semiconductors have been extensively investigated as spin laser gain mediums; however, the degree of polarization is limited by the light hole and heavy hole degeneracy. Herein, we evaluate the potential of CsPbBr3 nanocrystals─ones that are featured with low band-edge degeneracy and therefore a high degree of polarization as a result of inverted band structure and large spin-orbit coupling─as a gain medium for spin lasers. Our experiment and numerical modeling results reveal that, within the spin relaxation lifetime, the optical gain threshold can be depressed by polarizing the charge using circularly polarized photoexcitation. However, prolonging the spin relaxation lifetime is required to realize a spin laser.

Biomolecular Surface Functionalization and Stabilization Method to Fabricate Quantum Dots Nanobeads for Accurate Biosensing Detection.

The surface functionalization of quantum dots (QDs) is essential for their application as a label material in a biological field. Here, a protein surface functionalization approach was introduced to combine with silica encapsulation for the sustainable and stable synthesis of QDs nanobeads for biomarker detection. The formation of QDs nanobeads was achieved by multiple mercapto groups in bovine serum albumin (BSA) macromolecules as multidentate ligands to replace hydrophobic ligands on the surface of QDs and decompression. The resulting QDs nanobeads exhibited 20 times more photoluminescence than the corresponding hydrophobic QDs and presented excellent stability under physiological conditions due to the protection of BSA and silica. The nanobeads served as a robust signal-generating reagent to construct the lateral flow immunoassay (LFIA) biosensor for the detection of glycosylated hemoglobin (HbA1c). The concentration of HbA1c was determined within 10 min with high specificity using only 60 µL of whole blood samples collected clinically. The nanobeads-based LFIA biosensor exhibited linear detection of HbA1c from 4.2% to 13.6%. The accuracy and stability of this approach in clinical utility was demonstrated by the detection of HbA1c after a long-term storage of test strips. This protein surface modification technology provides a new way for improving the biological properties of QDs in clinical diagnosis.

Bulk-like ZnSe Quantum Dots Enabling Efficient Ultranarrow Blue Light-Emitting Diodes.

Blue-emitting heavy-metal free QDs simultaneously exhibiting photoluminescence quantum yield close to unity and narrow emission line widths are essential for next-generation electroluminescence displays, yet their synthesis is highly challenging. Herein, we develop the synthesis of blue-emitting QDs by growing a thin shell of ZnS on ZnSe cores with their size larger than bulk Bohr diameter. The bulk-like size of ZnSe cores enables the emission to locate in the blue region with a narrow emission width close to its intrinsic peak width. The obtained bulk-like ZnSe/ZnS core/shell QDs display high quantum yield of 95% and extremely narrow emission width of ∼9.6 nm. Moreover, the bulk-like size of ZnSe cores reduces the energy level difference between QDs and adjacent layers in LEDs and improves charge transport. The LEDs fabricated with these high-quality QDs show bright pure blue emission with an external quantum efficiency of 12.2% and a relatively long operating lifetime.

Quantum dot light-emitting diodes with high efficiency at high brightness via shell engineering.

Quantum dot light-emitting diodes (QD-LEDs) have made great development in the performance. However, the efficiency droop at high brightness limits their applications in daylight displays and outdoor lightings. Herein, we systematically regulate the shell structure and composition, and the results indicate that CdSe-based QDs with ZnSe interlayer and thinner ZnSeS outermost layer as emitting layers (EML) enable high-performance QD-LEDs. Accordingly, the devices exhibit peak external quantum efficiency (EQE) of 22.9% with corresponding brightness of 67,840 cd/m2, and this efficiency can be still maintained > 90% of the maximum value even at 100,000 cd/m2, which satisfies the requirements for high-brightness display and lighting applications. This strong performance is mainly attributed to the ZnSe/ZnSeS graded shell that smooths the injection barrier between QD EML and the adjacent hole transport layers (HTL), and then improves the hole injection and charge injection balance, in particular at the high luminance and/or at high current density.

Sensitive Immunoassay Based on Biocompatible and Robust Silica-Coated Cd-Free InP-Based Quantum Dots.

Low-toxic InP quantum dots (QDs) as an ideal candidate for Cd-based QDs have tremendous potential for next-generation commercial display and biological detection applications. However, the progress in biological detection is still far behind that of the Cd-based QDs. This is mainly because the InP-based QDs are of inferior stability and photoluminescence quantum yield (PL QY) in aqueous solution. Here, PL QY of 65% and excellent stability of InP/GaP/ZnS QD@SiO2 nanoparticles have been successfully synthesized via a silica coating method. The containing thiol-capped hydrophobic InP/GaP/ZnS QDs were pre-silanized with waterless, ammonia-free hydrolysis tetraethyl orthosilicate, and subsequently, an outer silica shell was generated in the reverse microemulsion. The corresponding QD-based fluorescence-linked immunosorbent assay exhibits a high sensitivity of 0.9 ng mL-1 for C-reactive protein and the broad detection range of 1-1000 ng mL-1, which was close to that of the state-of-the-art Cd-based QD@SiO2 nanoparticles and had the highest sensitivity of Cd-free QDs so far. This work provides a very successful silica coating method for the containing thiol-capped hydrophobic QDs and the QDs highly sensitive to water and oxygen, and the obtained InP/GaP/ZnS QD@SiO2 nanoparticles were considered as the robust, biocompatible, and promising Cd-free fluorescent labels for the further ultra-sensitive detection.

A quantum dot microspheres-based highly specific and sensitive three-dimensional microarray for multiplexed detection of inflammatory factors.

The development trend ofin vitrodiagnostics is to obtain various biological information from a sample at extremely low concentration and volume, which has promoted its progress in accurate and sensitive multiplexed detection. Here, we developed a single color quantum dot (QD) based three-dimensional (3D) structure matrix microarray and conducted the detection of two inflammatory factors (C-reactive protein (CRP) and serum amyloid A (SAA)) by a self-built fluorescence detection system. This strategy increased detection sensitivity by immobilizing the antibody specifically on the 3D substrate because it captured more than about 7 times of 'effective' antibodies compared to the two-dimensional (2D) plane. Compared to the dual QDs-2D fluorescence-linked immunosorbent assay, the limit of detection (LOD) of 3D microarray based on QDs modified with amphiphilic polymers has been further improved to 0.11 ng ml-1for SAA assay and to 0.16 ng ml-1for CRP assay, respectively. By using QD microspheres (SiO2@QDs@SiO2-COOH, containing approximately 200-300 hydrophobic QDs on per SiO2sphere) as fluorescent labels, the LOD for CRP and SAA of 3D microarray reached as high as 15 pg ml-1and 86 pg ml-1, and the sensitivity was further improved by 28-fold and 425-fold, respectively. Because of its excellent performance, this QD microspheres-based 3D microarray has great application potential for highly sensitive and multiplexed quantitative detection of other biomarkers, small molecules, and antibiotic residues in biomedicine and food safety.

General Mild Reaction Creates Highly Luminescent Organic-Ligand-Lacking Halide Perovskite Nanocrystals for Efficient Light-Emitting Diodes.

The presence of labile bulky insulating hydrocarbon ligands in halide perovskite nanocrystals (NCs) passivates surface traps but concurrently makes charge transport difficult in optoelectronic devices. Early efforts routinely rely on the replacement of long-chain ligands with short-chain cousins, leading to notable changes in NC's sizes and photophysical properties and thus making it hard to obtain devices with nearly designed emissions. Here we report a general solution-phase ligand-exchange strategy to produce organic-ligand-lacking halide perovskite NCs with high photoluminescence (PL) quantum yields and good stability in ambient air. We demonstrate that the ligand exchange can be achieved by a well-controlled mild reaction of thionyl halide with the carboxylic and amine groups on the NC's surface, resulting in nearly dry NCs with well-passivated surfaces and almost unaltered emission characteristics. Consequently, we achieve exceptionally high-performance blue perovskite NC light-emitting diodes (LEDs) with an external quantum efficiency of up to 1.35% and an extremely narrow full width at half-maximum of 14.6 nm. Our work provides a systematic framework for preparing high-quality organic-ligand-lacking perovskite NC inks that can be directly cast as films featuring effective charge transport, thereby providing the foundation for further development of a wide range of efficient perovskite optoelectronic devices.

High-efficiency CdSe/CdS nanorod-based red light-emitting diodes.

In this paper, we report the synthesis, the structural and optical characterization of CdSe/CdS//CdS nanorods (NRs) and their exploitation in nanorod-based light-emitting diodes (NR-LEDs). Two kinds of NRs of CdSe/CdS and CdSe/CdS//CdS were incorporated into the structure of solution-processed hybrid NR-LEDs. Compared to CdSe/CdS, the efficiencies of CdSe/CdS//CdS NR-based LEDs are overwhelmingly higher, specifically showing unprecedented values of peak current efficiency of 19.8 cd/A and external quantum efficiency of 15.7%. Such excellent results are likely attributable to a unique structure in CdSe/CdS//CdS NRs with a relatively high quantum yield, thick CdS outer shell, and rod structure which minimize nonradiative energy transfer between closely packed NRs in emitting layer.

Highly sensitive and accurate detection of C-reactive protein by CdSe/ZnS quantum dot-based fluorescence-linked immunosorbent assay.

BACKGROUND: The conventional and widely used enzyme-linked immunosorbent assays (ELISA), due to specificity and high-sensitivity, were suitable in vitro diagnosis. But enzymes are vulnerable to the external conditions, and the complex operation steps limit its application. Semiconductor quantum dots have been successfully used in biological and medical research due to the high photoluminescence and high resistance to photobleaching. In this study, we have developed a novel quantum dot-labeled immunosorbent assay for rapid disease detection of C-reactive protein (CRP). RESULTS: The assay for the detection of CRP can provide a wide analytical range of 1.56-400 ng/mL with the limit of detection (LOD) = 0.46 ng/mL and the limit of quantification = 1.53 ng/mL. The precision of the assay has been confirmed for low coefficient of variation, less than 10% (intra-assay) and less than 15% (inter-assay). The accuracy of assay meets the requirements with the recoveries of 95.4-105.7%. Furthermore, clinical samples have been collected and used for correlation analysis between this FLISA and gold standard Roche immunoturbidimetry. It shows excellent accurate concordance and the correlation coefficient value (R) is as high as 0.989 (n = 34). CONCLUSIONS: This in vitro quantum dot-based detection method offers a lower LOD and a wide liner detection range than ELISA. The total reaction time is only 50 min, which is much shorter than the commercialization ELISA (about 120 min). All of the results show that a convenient, sensitive, and accurate fluorescence-linked immunosorbent assay method has been well established for the detection of CRP samples. Therefore, this method has immense potential for the development of rapid and cost-effective in vitro diagnostic kits.