Clinical evaluation of tooth angle and peripheral bone thickness considering sex and age for implant placement in the maxillary anterior region.

STATEMENT OF PROBLEM: Consideration of the thickness of alveolar bone on both the palatal and labial sides and the inclination angle of teeth is important for immediate implant placement in the maxillary anterior region. However, comprehensive research exploring how sex and age influence the thickness of bone and tooth angle in the maxillary anterior region is lacking. PURPOSE: The purpose of this clinical study was to investigate the effect of sex and age on the thickness of labial and palatal bone and on the tooth inclination angle of maxillary central and lateral incisors using cone beam computed tomography (CBCT) images in an Asian population. MATERIAL AND METHODS: The labial and palatal bone thickness and the inclination angle of maxillary central and lateral incisors were measured from the CBCT images of 149 participants aged between 20 and 65 years. The correlation between the angles of the maxillary central and lateral incisors and sex and age on the tooth angles and thicknesses of labial and palatal bone was determined statistically. RESULTS: A high correlation (R=0.73) was found between the angle of maxillary central and lateral incisors. Men had higher angles of the maxillary central and lateral incisors and thicker palatal bone at the middle and root of the teeth compared with women. In both sexes, the angle and palatal bone thickness of maxillary central incisors were significantly higher than those of maxillary lateral incisors. The angle of both maxillary central and lateral incisors decreased gradually with age, with a difference in angle of over 10 degrees. CONCLUSIONS: The study revealed that women exhibited relatively thinner palatal bone compared with men. Additionally, participants aged between 40 and 65 years exhibited significantly thicker palatal bone compared with younger age groups, potentially providing a larger site for implant placement. Furthermore, tooth angle gradually decreases with age in the maxillary anterior region.

The Association of Salivary Flow Rate and Sleep Quality among Head and Neck Cancer Survivors after Radiotherapy.

BACKGROUND: Head and neck cancer survivors suffer from xerostomia and sleep disturbances after radiotherapy, both of which affect their quality of life. This study aimed to explore the role of salivary flow in the oral health and sleep quality of head and neck cancer survivors. METHODS: We recruited 120 head and neck cancer survivors who were experiencing symptoms of dry mouth or sleep disturbances post-radiotherapy from a dental clinic. We gathered their socio-demographic and clinical data, measured their salivary flow rate, and recorded their dry mouth score using the summated xerostomia inventory. Additionally, a dentist collected the DMFT (Decayed, Missing, and Filled Teeth) index. The Pittsburgh Sleep Quality Index was employed to assess their sleep quality. RESULTS: In this study, xerostomia was observed in nearly 80% of the cancer survivors. The concurrent prevalence of sleep disturbance and xerostomia was at 55%. After five years post-radiotherapy, there was a significant improvement observed in both the quality of sleep (p = 0.03) and the stimulated salivary flow rate (p = 0.04). Additionally, these improvements were noted to have commenced from the third year onwards. A significant association was found between stimulated salivary flow and dry mouth scores with poor sleep quality (p <  0.05). CONCLUSIONS: We recommend that dental professionals prioritize managing both dental and mental health issues equally for head and neck cancer survivors who have undergone radiotherapy within the past 3 years.

In vitro antimicrobial and antipro-inflammation potential of honokiol and magnolol against oral pathogens and macrophages.

BACKGROUND/PURPOSE: Honokiol and magnolol are natural components isolated from Magnolia bark that is used in traditional Chinese and Japanese herbal medicine. These two isomers are used as a component of dietary supplements and cosmetic products. In this study, we investigated the antimicrobial effect of honokiol and magnolol on pathogens causing oral diseases, their mechanism of action in biofilm formation and drug resistance of oral pathogens, and inflammatory regulation in mammalian cells. METHODS: We determined the minimum inhibitory concentration and minimum bactericidal concentration of honokiol and magnolol, and their stability at different temperatures and pH. We also evaluated their effect on biofilm formation, antibiotic-resistance gene expression in MRSA, and pro-inflammatory gene expression in mammalian cells. RESULTS: Honokiol showed better antimicrobial activity than magnolol. Both honokiol and magnolol showed stable bacterial inhibitory activity over a wide range of temperature and pH, reduced biofilm formation, and antibiotic resistance in oral pathogens. The biofilm formation- and antibiotic resistance-related gene expression was consistent with the respective phenotypes. Furthermore, these two isomers repressed the expression of pro-inflammatory genes in RAW264.7 cells. CONCLUSION: Our study provides evidence of the potential application of honokiol and magnolol in dental medicine to cure or prevent oral diseases.

Oral Submucous Fibrosis: A Review on Biomarkers, Pathogenic Mechanisms, and Treatments.

Oral submucous fibrosis (OSF) is a collagen deposition disorder that affects a patient's oral function and quality of life. It may also potentially transform into malignancy. This review summarizes the risk factors, pathogenic mechanisms, and treatments of OSF based on clinical and bio-molecular evidence. Betel nut chewing is a major risk factor that causes OSF in Asia. However, no direct evidence of arecoline-induced carcinogenesis has been found in animal models. Despite identification of numerous biomarkers of OSF lesions and conducting trials with different drug combinations, clinicians still adopt conservative treatments that primarily focus on relieving the symptoms of OSF. Treatments focus on reducing inflammation and improving mouth opening to improve a patient's quality of life. In conclusion, high-quality clinical studies are needed to aid clinicians in developing and applying molecular biomarkers as well as standard treatment guidelines.

Impacts of 3D bone-to- implant contact and implant diameter on primary stability of dental implant.

BACKGROUND/PURPOSE: This study investigated the effects of three three-dimensional (3D) bone-to-implant contact (BIC) parameters-potential BIC area (pBICA), BIC area (BICA), and 3D BIC percentage (3D BIC%; defined as BICA divided by pBICA)-in relation to the implant diameter on primary implant stability, as well as their correlations were also evaluated. METHODS: Dental implants with diameters of 3.75, 4, 5, and 6 mm and artificial bone specimens were scanned by microcomputed tomography to construct 3D models for calculating pBICA, BICA, and 3D BIC%. Indexes of the primary implant stability including the insertion torque value (ITV), Periotest value (PTV), and implant stability quotient (ISQ) were measured after implants with various diameters were placed into bone specimens. The Kruskal-Wallis test, Wilcoxon rank-sum test with Bonferroni adjustment, and Spearman correlations were all performed as statistical and correlation analyses. RESULTS: The implant diameter significantly influenced pBICA and BICA, but not 3D BIC%. ITV and PTV were more sensitive to implant diameter than was ISQ. The coefficients of determination were high (>0.92) for the correlations between pBICA (or BICA) and indexes of the primary implant stability. CONCLUSION: This study revealed how the implant diameter and the three-dimensional (3D) BIC influence the primary stabilities of dental implant. ITV and PTV were more sensitively influenced by the implant diameter than ISQ. The pBICA and BICA seem to be more important than 3D BIC % for using wider implant in treatment plan, since those two parameters are highly predictive of variations in the primary stability of dental implant.

Effects of diameters of implant and abutment screw on stress distribution within dental implant and alveolar bone: A three-dimensional finite element analysis.

Background/purpose: Few studies have investigated the effects of abutment screw diameter in the stress of dental implants and alveolar bones under occlusal forces. In this study, we investigated how variations in implant diameter, abutment screw diameter, and bone condition affect stresses in the abutment screw, implant, and surrounding bone. Materials and methods: Three-dimensional finite element (FE) models were fabricated for dental implants with external hex-type abutments measuring 4 and 5 mm in diameter. The models also included abutment screws measuring 2.0 and 2.5 mm in diameter. Each implant model was integrated with the mandibular bone comprising the cortical bone and four types of cancellous bone. In total, 12 finite element models were generated, subjected to three different occlusal forces, and analyzed using FE software to investigate the stress distribution of dental implant and alveolar bone. Results: Wider implants demonstrated lower stresses in implant and bone compared with standard-diameter implants. The quality of cancellous bone has a minimal impact on the stress values of the implant, abutment screw, and cortical bone. Regardless of occlusal arrangement or quality of cancellous bone, a consistent pattern emerged: larger abutment screw diameters led to increased stress levels on the screws, while the stress levels in both cortical and cancellous bone showed comparatively minor fluctuations. Conclusion: Wider implants tend to have better stress distribution than standard-diameter implants. The potential advantage of augmenting the abutment screw diameter is unfavorable. It may result in elevated stresses in the implant system.

Design and Biomechanical Analysis of Customized Angled Abutment Based on Tooth Inclination Angle for Immediate Implant Placement on Maxillary Anterior Region.

PURPOSE: Finite element analysis and an in vitro experiment were employed to investigate the loading effects of angled abutments, comparing various customized angled abutments derived from the average angle of incisors in patients with a commercial 15°∆ angled abutment, on both the implant and surrounding bone. METHODS: Four customized angled abutment models (21.9°∆, 24.15°∆, 20.22°∆, 33°∆) were developed using cone-beam computed tomography (CBCT) images of incisor inclination from various age groups of patients. 3D maxillary bone models were created from CBCT images of four individual patients. Finite element analysis and in-vitro strain gauge experiments were conducted, applying 100N or 50N of axial or oblique force, to assess the differences in stress/strain between the customized and the commercial 15°∆ angled abutments in both the implants and surrounding bone. RESULTS: Under axial loading, the stress values in the dental implant and surrounding bone were elevated due to the relatively higher angles of the customized angled abutments (21.9°∆, 24.15°∆, 20.22°∆, 33°∆) when compared to the commercial 15°∆ angled abutment; however, under oblique loading the commercial 15°∆angled abutment exhibited higher stress values in both the implant and surrounding bone. For in vitro experiment, there is no statically difference in bone strain between the customized (21.9°∆) and the commercial 15°∆ angled abutments in axial loading. Nevertheless, in oblique loading using a commercial 15°∆ angled abutment induced the higher bone strains. CONCLUSION: Customized angled abutments offer lower stress/strain under oblique loads but higher stress/strain under axial loads compared to commercial ones. Therefore, in the design and application of angled abutments, careful consideration of the occlusal load direction is paramount for achieving biomechanical success of dental implant.

Association of higher transient receptor potential melastatin 8 expression with higher tumor histologic grades, lymph node metastasis, risk factors, and worse survival in patients with head and neck squamous cell carcinoma.

Background/purpose: Transient receptor potential melastatin 8 (TRPM8), a thermosensitive ion channel known for its role in cold sensation and menthol response, has emerged as a potential regulator in various cancers. This study aimed to investigate expression trends of TRPM8 in head and neck squamous cell carcinoma (HNSCC) cases and oral squamous cell carcinoma (OSCC) cell lines and its association with clinicopathological features. Materials and methods: The noncancerous matched tissues and HNSCC paired tissue samples from 84 HNSCC patients were utilized to evaluate the association of TRPM8 with HNSCC clinicopathological features. TRPM8 expression was examined in HNSCC patient tissues and OSCC cell lines treated with arecoline. Results: Kaplan-Meier survival analysis of TCGA data revealed high TRPM8 expression correlated with unfavorable outcomes and higher tumor histologic grades. TRPM8 mRNA expression was upregulated in HNSCC cell lines and patients' tissue samples. Arecoline treatment led to significantly increased TRPM8 mRNA and protein expression in OSCC cell lines. Lymph node metastasis showed a significant association with upregulated TRPM8 expression in combined OSCC and oropharyngeal squamous cell carcinoma (OPSCC) cases. TRPM8 mRNA expression was upregulated in HNSCC and OSCC patients with alcohol drinking and cigarette smoking habits, but not in betel quid chewing. Conclusion: These findings reveal the involvement of TRPM8 in HNSCC's malignant development and metastasis, suggesting that high expression of TRMP8 may be mutually causal with addiction to tobacco, alcohol, and betel nut in HNSCC patients. Further investigations are needed to determine the underlying pathways of TRPM8 in HNSCC's development and progression.

Arecoline Induces ROS Accumulation, Transcription of Proinflammatory Factors, and Expression of KRT6 in Oral Epithelial Cells.

Areca nut is a major contributor to the high prevalence of oral cancer in Asia. The precise mechanisms by which areca nut stimulates mucosal cells and contributes to the progression of oral cancer urgently require clarification. The current study aimed to assess the effects of arecoline on the normal human gingival epithelium cell line S-G. Cell viability, levels of reactive oxygen species (ROS), protein expression, cellular morphology, and gene expression were evaluated using the MTT test, flow cytometry, Western blot analysis, optical or confocal microscopy, and RT-qPCR. Keratin (KRT6) analysis involved matched normal and cancer tissues from clinical head and neck specimens. The results demonstrated that 12.5 µg/mL of arecoline induced ROS production, tumor necrosis factor-α (TNF-α), and interleukin-6 (IL-6) mRNA expression in S-G cells. This activation of the MAPK/ERK pathway increased KRT6 expression while limiting cell migration. In head and neck cancer tissues, KRT6B gene expression exceeded that of normal tissues. This study confirms that arecoline induces ROS accumulation in normal cells, leading to the secretion of proinflammatory factors and KRT6 expression. This impedes oral mucosal healing, thereby promoting the progression of oral cancer.

Comparisons of maximum deformation and failure forces at the implant-abutment interface of titanium implants between titanium-alloy and zirconia abutments with two levels of marginal bone loss.

BACKGROUND: Zirconia materials are known for their optimal aesthetics, but they are brittle, and concerns remain about whether their mechanical properties are sufficient for withstanding the forces exerted in the oral cavity. Therefore, this study compared the maximum deformation and failure forces of titanium implants between titanium-alloy and zirconia abutments under oblique compressive forces in the presence of two levels of marginal bone loss. METHODS: Twenty implants were divided into Groups A and B, with simulated bone losses of 3.0 and 1.5 mm, respectively. Groups A and B were also each divided into two subgroups with five implants each: (1) titanium implants connected to titanium-alloy abutments and (2) titanium implants connected to zirconia abutments. The maximum deformation and failure forces of each sample was determined using a universal testing machine. The data were analyzed using the nonparametric Mann-Whitney test. RESULTS: The mean maximum deformation and failure forces obtained the subgroups were as follows: A1 (simulated bone loss of 3.0 mm, titanium-alloy abutment) = 540.6 N and 656.9 N, respectively; A2 (simulated bone loss of 3.0 mm, zirconia abutment) = 531.8 N and 852.7 N; B1 (simulated bone loss of 1.5 mm, titanium-alloy abutment) = 1070.9 N and 1260.2 N; and B2 (simulated bone loss of 1.5 mm, zirconia abutment) = 907.3 N and 1182.8 N. The maximum deformation force differed significantly between Groups B1 and B2 but not between Groups A1 and A2. The failure force did not differ between Groups A1 and A2 or between Groups B1 and B2. The maximum deformation and failure forces differed significantly between Groups A1 and B1 and between Groups A2 and B2. CONCLUSIONS: Based on this experimental study, the maximum deformation and failure forces are lower for implants with a marginal bone loss of 3.0 mm than of 1.5 mm. Zirconia abutments can withstand physiological occlusal forces applied in the anterior region.

Assessment of sagittal root position, alveolar bone concavity, and labial bone perforation in the mandibular anterior tooth region for immediate implant placement.

Background/purpose: Immediate implant placement in the mandibular anterior tooth region requires a thorough understanding of the alveolar bone anatomy for determining the ideal implant position and preventing labial bone perforation. The anatomical characteristics of the jaws are closely related to the sagittal root position (SRP) and labial concavity of the alveolar bone. This study evaluated SRP, labial concavity, and labial bone perforation in the mandibular anterior tooth region. Materials and methods: Cone-beam computed tomography images of 116 participants (696 teeth) were uploaded to medical imaging software. SRP classification, labial concavity of the alveolar bone, and labial bone perforation were analyzed. A t-test was performed to compare measurements between the central and lateral incisors, central incisors and canines, and lateral incisors and canines. Results: The results revealed that the frequency of SRP Class I (88.20%) was the highest, and that of SRP Class III was the lowest (0.53%). Central incisors had the highest mean labial concavity (144.5°), followed by the canines (143.9°) and lateral incisors (143.3°), and the differences were significant between any two of the tooth groups (all P < 0.05). The frequency distribution of labial bone perforation was the highest in central incisors (69.9%), followed by the canines (40.5%) and lateral incisors (10.8%). Conclusion: The majority of mandibular anterior teeth had SRP Class I, with Class III being the least prevalent. Central incisors had the highest mean alveolar bone concavity angle and the most frequent labial bone perforations.

Evaluation of sagittal root position and labial alveolar bone concavity in the maxillary anterior tooth area for immediate implant placement.

BACKGROUND: The anatomical characteristics of the maxillary labial alveolar bone play a crucial role in the treatment planning of immediate implant placement. The sagittal root position (SRP) and alveolar bone concavity are closely related to anatomical characteristics in determining the ideal implant position. This study evaluated the SRP and labial alveolar bone concavity in the maxillary anterior teeth area. METHODS: Cone-beam computed tomography images of 120 samples involving 720 teeth were uploaded to the medical imaging software. The SRP was classified as Class I, II, III, or IV, and the concavity of labial alveolar bone was measured. A T test was performed to compare measurements between the central and lateral incisors, between the central incisors and canines, and between the lateral incisors and canine. RESULTS: The majority of the SRPs of the maxillary anterior teeth were class I (engaging the labial cortical plate) with frequencies of 98.3%, 85.8%, and 81.7% for the canines, lateral incisors, and central incisors, respectively. In terms of concavity of labial alveolar bone in maxillary tooth area, canines also had the largest mean value (139.5°), followed by lateral incisors, whereas central incisors has the smallest mean value (131.7°). The results of the T test revealed a significant difference ( p < 0.001) in labial alveolar bone concavity between central and lateral incisors, between central incisors and canines, and between lateral incisors and canines. CONCLUSION: Most maxillary anterior teeth were classified as Class I SRP, Class III SRP was the least prevalent, and the concavity of the labial alveolar bone significantly differed between the central and lateral incisors, between the central incisors and canines, and between the lateral incisors and canines. In addition, the canines had the highest mean alveolar bone concavity angle, indicating that less concavity in the canines area.

Assessments of inclinations of the mandibular fossa by computed tomography in an Asian population.

This study aims to evaluate the inclinations of right and left sides the mandibular fossa in Asian population using computed tomography (CT) images and determine its effects according to the parameters of gender, age, and asymmetry. CT images of the heads of 198 Asian subjects [95 females aged 44.2 ± 20.7 years, range 11-88 years; and 103 males aged 44.5 ± 19.7 years, range 15-98 years] were selected. The following eight parameters characterizing the inclinations of the mandibular fossa were measured by medical imaging software: anterior and posterior inclinations on the left and right sides on a sagittal view, and medial and lateral inclinations on the left and right sides on a coronal view. The anterior inclination was significant steeper in males than in females on both the left and right sides. A moderate positive correlation was found between age and anterior inclinations on the left and right sides. None of the other parameters were significantly affected by age or gender. None of the parameters differed significantly between the right and left sides of the mandibular fossa in males, females, or all subjects. The anterior inclination of the mandibular fossa was affected by aging and gender becoming steeper in Asians males than females. Besides, there were no asymmetry in the right and left side inclinations of the mandibular fossa.

Biomechanical Analyses of Porous Designs of 3D-Printed Titanium Implant for Mandibular Segmental Osteotomy Defects.

Clinically, a reconstruction plate can be used for the facial repair of patients with mandibular segmental defects, but it cannot restore their chewing function. The main purpose of this research is to design a new three-dimensionally (3D) printed porous titanium mandibular implant with both facial restoration and oral chewing function reconstruction. Its biomechanical properties were examined using both finite element analysis (FEA) and in vitro experiments. Cone beam computed tomography images of the mandible of a patient with oral cancer were selected as a reference to create 3D computational models of the bone and of the 3D-printed porous implant. The pores of the porous implant were circles or hexagons of 1 or 2 mm in size. A nonporous implant was fabricated as a control model. For the FEA, two chewing modes, namely right unilateral molar clench and right group function, were set as loading conditions. Regarding the boundary condition, the displacement of both condyles was fixed in all directions. For the in vitro experiments, an occlusal force (100 N) was applied to the abutment of the 3D-printed mandibular implants with and without porous designs as the loading condition. The porous mandibular implants withstood higher stress and strain than the nonporous mandibular implant, but all stress values were lower than the yield strength of Ti-6Al-4V (800 MPa). The strain value of the bone surrounding the mandibular implant was affected not only by the shape and size of the pores but also by the chewing mode. According to Frost's mechanostat theory of bone, higher bone strain under the porous implants might help maintain or improve bone quality and bone strength. The findings of this study serve as a biomechanical reference for the design of 3D-printed titanium mandibular implants and require confirmation through clinical investigations.

Outpatient Dental Treatment Expenditure for Patients with Oromaxillofacial Cancer: A Cohort Study in Taiwan.

The information on the outpatient expenditure of patients with oromaxillofacial cancer is minimal. This study aimed to compare the average annual expenditure on dental treatment for these patients 5 years before and 5 years after oromaxillofacial cancer diagnosis. In this study, 7731 patients who received oromaxillofacial cancer diagnosis in 2005 were selected from the Registry of Catastrophic Illness Database as the case-cohort. In the control cohort, 38,655 people without cancer were selected from the National Health Insurance Research Database, with the case-control ratio being 1:5. All participants were observed for 5 years before diagnosis and 5 years after diagnosis. The conditional logistic regression model was used to determine the odds ratios of annual expenditures incurred by participants in the case-cohort. The measurement results indicated that in the oromaxillofacial cancer cohort, the average annual dental expenditure levels at 1, 2, 3, 4, and 5 years after diagnosis were US $97.34, US $77.23, US $109.65, US $128.43, and US $128.03 and those at these years before diagnosis were US $37.52, US $32.10, US $31.86, US $29.14, and US $29.35, respectively. In conclusion, the average annual expenditure on the dental treatment of oromaxillofacial cancer patients after five years of diagnosis was increased compared to five years before diagnosis.

Patients with periodontitis are at a higher risk of stroke: A Taiwanese cohort study.

BACKGROUND: This study aimed to investigate the risk of stroke incidence in patients with periodontitis. METHODS: Data on patients diagnosed with periodontitis were collected from Taiwan's National Health Insurance Research Database and were matched (1:1) with patients without periodontitis between 2001 and 2010. A multivariable Cox survival model was used to predict stroke between patients with and without periodontitis, and the possibility of confounders. Hazard ratios (HRs) with 95% confidence intervals (CIs) were used to explore the risk of stroke in the case and control groups. Diseases found during the follow-up period were analyzed to determine possible effects on the study. A total of 282 560 periodontitis and nonperiodontitis patients were enrolled, with most subjects aged 40 to 59 years. RESULTS: The overall cumulative incidence of stroke was 2.14 times higher in periodontitis than in nonperiodontitis, and the highest HR was in the more than 80 years age group (HR = 9.30; 95% CI, 7.06-12.26). The multivariate Cox model indicated that the adjusted HR (aHR) between the case and control was 2.03 (95% CI, 1.99-2.08), and a higher aHR was associated with hypertension. Atherosclerosis, atrial fibrillation, obesity, kidney disease, anxiety, and gout discovered during follow-up also showed a potential risk of stroke in patients with periodontitis. CONCLUSION: Therefore, this study suggests a high risk of stroke in patients with periodontitis.

Assessment of the Retromolar Canal in Taiwan Subpopulation: A Cross-Sectional Cone-Beam Computed Tomography Study in a Medical Center.

The retromolar canal is an anatomical variation that occurs in the mandibular bone. The retromolar canal typically originates in the mandibular canal on the distal side of the third molar and extends forward and upward to the retromolar foramen (RMF), which contains the neurovascular bundle. Accidentally damaging the neurovascular bundle in the retromolar canal during the extraction of the third molar, dental implant surgery, or maxillofacial orthognathic surgery may lead to subsequent complications such as incomplete local anesthesia, paresthesia, and bleeding during operation. The objective of this study was to investigate the prevalence of the RMF in the Taiwanese population in a medical center by using dental cone-beam computed tomography (CBCT) and to identify the position of the RMF in the mandibular bone. The dental CBCT images for the mandibular bone of 68 hemi-mandible were uploaded to the medical imaging software Mimics 15.1 to determine the prevalence of the RMF in the Taiwanese population and the three positional parameters of the RMF in the mandibular bone: (1) The diameter of the RMF, (2) the horizontal distance from the midpoint of the RMF to the distal cementoenamel junction of the second molar, and (3) the vertical distance from the midpoint of the RMF to the upper border of the mandibular canal. Seven RMFs were observed in the 68 hemi-mandibles. Thus, the RMF prevalence was 10.3%. In addition, the diameter of the RMF was 1.41 ± 0.30 mm (mean ± standard deviation), the horizontal distance from the midpoint of the RMF to the distal cementoenamel junction of the the second molar was 12.93 ± 2.87 mm, and the vertical distance from the midpoint of the RMF to the upper border of the mandibular canal below second molar was 13.62 ± 1.3487 mm. This study determined the prevalence of the RMF in the Taiwanese population in a medical center and its relative position in the mandibular bone. This information can provide clinicians with a reference for posterior mandible anesthesia and surgery to ensure medical safety.

Can Male Patient's Age Affect the Cortical Bone Thickness of Jawbone for Dental Implant Placement? A Cohort Study.

Dental implants are among the most common treatments for missing teeth. The thickness of the crestal cortical bone at the potential dental implant site is a critical factor affecting the success rate of dental implant surgery. However, previous studies have predominantly focused on female patients, who are at a high risk of osteoporosis, for the discussion of bone quality and quantity at the dental implant site. This study aimed to investigate the effect of male patients' age on the crestal cortical bone of the jaw at the dental implant site by using dental cone-beam computed tomography (CBCT). This study performed dental CBCT on 84 male patients of various ages to obtain tomograms of 288 dental implant sites at the jawbone (41 sites in the anterior maxilla, 95 in the posterior maxilla, 59 in the anterior mandible, and 93 in the posterior mandible) for measuring the cortical bone thickness. A one-way analysis of variance and Scheffe's test were performed on the measurement results to compare the cortical bone thickness at implant sites in the four jaw areas. The correlation between male patient age and cortical bone thickness at the dental implant site was determined. The four jaw areas in order of the cortical bone thickness were as follows: posterior mandible (1.07 ± 0.44 mm), anterior mandible (0.99 ± 0.30 mm), anterior maxilla (0.82 ± 0.32 mm), and posterior maxilla (0.71 ± 0.27 mm). Apart from dental implant sites in the anterior and posterior mandibles, no significant correlation was observed between male patients' age and the cortical bone thickness at the dental implant site.