Kiwi-Inspired Rational Nanoarchitecture with Intensified and Discrete Magneto-Fluorescent Functionalities for Ultrasensitive Point-of-Care Immunoassay.

Fluorescent lateral flow immunoassays (FLFIA) is a well-established rapid detection technique for quantitative analysis. However, achieving accurate analysis of biomarkers at the pg mL-1 level using FLFIA still poses challenges. Herein, an ultrasensitive FLFIA platform is reported utilizing a kiwi-type magneto-fluorescent silica nanohybrid (designated as MFS) that serves as both a target-enrichment substrate and an optical signal enhancement label. The spatially-layered architecture comprises a Fe3O4 core, an endocarp-fibers like dendritic mesoporous silica, seed-like quantum dots, and a kiwi-flesh like silica matrix. The MFS demonstrates heightened fluorescence brightness, swift magnetic response, excellent size uniformity, and dispersibility in water. Through liquid-phase capturing and fluorescence-enhanced signal amplification, as well as magnetic-enrichment sample amplification and magnetic-separation noise reduction, the MFS-based FLFIA is successfully applied to the detection of cardiac troponin I that achieved a limit of detection at 8.4 pg mL-1, tens of times lower than those of previously published fluorescent and colorimetric lateral flow immunoassays. This work offers insights into the strategic design of magneto-fluorescent synergetic signal amplification on LFIA platform and underscores their prospects in high-sensitive rapid and on-site diagnosis of biomarkers.

Visible-Light-Driven Decarboxylative Coupling of 2H-Indazoles with α-Keto Acids without Photocatalysts and Oxidants.

An efficient synthesis of functionalized 3-acyl-2H-indazoles via visible-light-induced self-catalyzed energy transfer was developed. This method utilized a self-catalyzed energy transfer process between 2H-indazoles and α-keto acids, offering advantages like absence of photosensitizers, metal catalysts, and strong oxidants, broad substrate compatibility, and operational simplicity under mild conditions.

Simple Ether-Directed Enantioselective C(sp3 )-H Borylation of Cyclopropanes Enabled by Iridium Catalysis.

Reported here is an efficient and simple ether-directed iridium-catalyzed enantioselective C(sp3 )-H borylation of cyclopropanes. Various functional groups were well-tolerated, affording a vast array of chiral cyclopropanes with high enantioselectivities. We also demonstrated that the turnover numbers of the current reaction could be up to 335.

Visible-light-mediated aerobic Ritter-type C-H amination of diarylmethanes using DDQ/tert-butyl nitrite.

A metal-free photocatalytic Ritter-type C-H amination of unactivated sp3 carbons using molecular oxygen as a terminal oxidant has been developed. By employing a co-catalytic system of 3-dichloro-4,5-dicyano-1,4-benzoquinone (DDQ) and tert-butyl nitrite (TBN), this novel strategy provides a low cost, sustainable and scalable way to synthesise a broad range of secondary amides in moderate to excellent yields under mild conditions.

Simple and efficient one-pot multi-step strategy for the synthesis of 2-substituted (1,2,5-triarylpyrrolo[3,2-c]pyridin-3-yl)-N-arylacetamide derivatives in water.

A novel one-pot multi-step domino strategy for the synthesis of functionalized 2-substituted acetic acids, 2-substituted (1,2,5-triarylpyrrolo[3,2-c]pyridin-3-yl)acetates and 2-substituted-(1,2,5-triarylpyrrolo[3,2-c]pyridin-3-yl)-N-arylacetamides has been established from inexpensive and readily available starting materials. The reaction can be easily performed by employing different substrates via a one-pot multi-step domino reaction. The target products can be easily obtained with satisfactory yields by only simple recrystallization from a mixture of hot 95% ethanol and N,N-dimethylformamide. The reaction features of readily available starting materials, broad substrate scope, bond-forming efficiency, simple one-pot multi-step synthesis as well as green reaction media, make the procedure highly useful for the construction of potential pharmacological heterocyclic molecules.

A chromatography-free and aqueous waste-free process for thioamide preparation with Lawesson's reagent.

After completing the thio-substitution with Lawesson's reagent, ethanol was found to be effective in the decomposition of the inherent stoichiometric six-membered-ring byproduct from the Lawesson's reagent to a highly polarized diethyl thiophosphonate. The treatment significantly simplified the following chromatography purification of the desired thioamide in a small scale preparation. As scaling up the preparation of two pincer-type thioamides, we have successfully developed a convenient process with ethylene glycol to replace ethanol during the workup, including a traditional phase separation, extraction, and recrystallization. The newly developed chromatography-free procedure did not generate P-containing aqueous waste, and only organic effluents were discharged. It is believed that the optimized procedure offers the great opportunity of applying the Lawesson's reagent for various thio-substitution reactions on a large scale.

Tandem Synthesis of 2-Carboxybenzofurans via Sequential Cu-Catalyzed C-O Coupling and Mo(CO)6-Mediated Carbonylation Reactions.

A modular tandem synthesis of 2-carboxybenzofurans from 2-gem-dibromovinylphenols has been established based on a sequence of Cu-catalyzed intramolecular C-O coupling and Mo(CO)6-mediated intermolecular carbonylation reactions. This protocol allowed one-step access to a broad variety of functionalized benzofuran-2-carboxylic acids, esters, and amides in good to excellent yields under Pd- and CO gas-free conditions.

Electrochemical Performance of ABNO for Oxidation of Secondary Alcohols in Acetonitrile Solution.

The ketones was successfully prepared from secondary alcohols using 9-azabicyclo[3.3.1]nonane-N-oxyl (ABNO) as the catalyst and 2,6-lutidine as the base in acetonitrile solution. The electrochemical activity of ABNO for oxidation of 1-phenylethanol was investigated by cyclic voltammetry, in situ Fourier transform infrared spectroscopy (FTIR) and constant current electrolysis experiments. The resulting cyclic voltammetry indicated that ABNO exhibited much higher electrochemical activity when compared with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) under the similar conditions. A reasonable reaction mechanism of the electrocatalytic oxidation of 1-phenylethanol to acetophenone was proposed. In addition, a series of secondary alcohols could be converted to the corresponding ketones at room temperature in 80⁻95% isolated yields.

An efficient Pd-NHC catalyst system in situ generated from Na2PdCl4 and PEG-functionalized imidazolium salts for Mizoroki-Heck reactions in water.

Three PEG-functionalized imidazolium salts L1-L3 were designed and prepared from commercially available materials via a simple method. Their corresponding water soluble Pd-NHC catalysts, in situ generated from the imidazolium salts L1-L3 and Na2PdCl4 in water, showed impressive catalytic activity for aqueous Mizoroki-Heck reactions. The kinetic study revealed that the Pd catalyst derived from the imidazolium salt L1, bearing a pyridine-2-methyl substituent at the N3 atom of the imidazole ring, showed the best catalytic activity. Under the optimal conditions, a wide range of substituted alkenes were achieved in good to excellent yields from various aryl bromides and alkenes with the catalyst TON of up to 10,000.

Highly bulky and stable geometry-constrained iminopyridines: Synthesis, structure and application in Pd-catalyzed Suzuki coupling of aryl chlorides.

A series of bulky geometry-constrained iminopyridylpalladium chlorides were developed. The steric environment adjacent to the nitrogen atom in the pyridine rings and diimine parts enhanced the thermal stability of the palladium species. Bulkier groups at the imino group stabilized the palladium species and the corresponding palladium chlorides showed high activities in the coupling reaction of aryl chlorides.

α,ß-Double Electrophilic Addition of Allene-1,3-Dicarboxylic Esters for the Construction of Polysubstituted Furans by KI/tert-Butyl Hydroperoxide (TBHP)-Promoted Oxidative Annulation.

An unprecedented KI/tert-butyl hydroperoxide promoted tandem Michael addition/oxidative annulation of allene-1,3-dicarboxylic esters and 1,3-dicarbonyl compounds has been developed. This procedure provides a new, facile, and transition-metal-free synthetic approach to afford polysubstituted furans in moderate to excellent yields (up to 93 %). This method first establishes a α,ß-double electrophilic reaction mode of allene-1,3-dicarboxylic esters to form 1,3-dicarbonyl compounds.

A mild copper-catalyzed aerobic oxidative thiocyanation of arylboronic acids with TMSNCS.

A facile and efficient transformation of arylboronic acids to their corresponding aryl thiocyanates has been successfully developed. Based on the CuCl-catalyzed oxidative cross-coupling reaction between arylboronic acids and trimethylsilylisothiocyanate (TMSNCS) under oxygen atmosphere, the transformation can be readily conducted at ambient temperature. The newly-developed protocol provided a competitive synthetic approach to aryl thiocyanates that can tolerate a broad range of reactive functional groups and/or strong electron-withdrawing groups.

Copper-catalyzed intramolecular dearomative aza-Wacker reaction of indole.

Herein, we describe a copper-catalyzed intramolecular dearomative amination of indoles via a formal aza-Wacker reaction. This protocol provides an efficient method to access aza-polycyclic indoline molecules bearing exocyclic CC bonds in moderate to excellent yields in the presence of molecular oxygen as an oxidant. It is worth noting that indolin-3-ones are achieved when employing C3-non-substituted indoles as substrates.

Rational regulation of post-electrodialysis electrochromic anion exchange membranes via TiO2@Ag synergistically strengthens visible-light photocatalytic anti-contamination activity.

Membrane-contamination during electrodialysis (ED) process is still a non-negligible challenge, while irreversible consumption and unsustainability have become the main bottlenecks limiting the improvement of anion exchange membranes (AEMs) anti-contamination activity. Here, we introduce a novel approach to design AEMs by chemically assembling 4-pyndinepropanol with bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO) in an electrochromic-inspired process. Subsequently, the co-mingled TiO2@Ag nanosheet with the casting-solution were sprayed onto the surface of the substrate membrane to create a micrometer-thick interfacial layer. The addition of Ag nanoparticles (NPs) enhances the active sites of TiO2, resulting in stronger local surface plasmon resonance (LSPR) effects and reducing its energy band gap limitation (From 3.11 to 2.63 eV). Post-electrodialysis electrochromic AEMs incorporating TiO2@Ag exhibit synergistic enhancement of sunlight absorption, effectively suppressing photogenerated carrier binding and promoting migration. These resultant-membranes demonstrate significantly improved bacterial inhibition properties (42.0-fold increase for E. coli) and degradation activity (7.59-fold increase for rhodamine B) compared to pure TiO2 membranes. Importantly, they maintain photocatalytic activity without compromising salt-separation performance or stability, as the spraying process utilizes the same substrate materials. This approach to rational design and regulation of anti-contamination AEMs offers new insights into the collaborative synergy of color-changing and photocatalytic materials.

Pd-Catalyzed Asymmetric Intramolecular Dearomatizing Reductive Heck Reaction of Indoles.

An enantioselective Pd-catalyzed intramolecular dearomative reductive Heck reaction of N-(o-bromoaryl) indole-3-carboxamide is developed. By employing Pd(dba)2/SPINOL-based phosphoramidite as the chiral catalyst and HCO2Na as the hydride source, a series of enantioenriched spiro indolines bearing vicinal stereocenters were afforded in moderate to good yields with excellent enantioselectivities. The reductive Heck reaction of formal tetrasubstituted alkene bearing ß-hydrogens is therefore realized by inhibiting ß-H elimination.

Hexachlorocyclotriphosphazene (HCCP)-mediated direct formation of thioethers and ethers from quinazolin-4(3H)-ones.

A hexachlorocyclotriphosphazene (HCCP)-mediated direct formation of quinazoline (thio)ethers from quinazolin-4(3H)-ones has been developed. Treatment of quinazolin-4(3H)-ones with HCCP, diisopropylethylamine (DIPEA), and thiophenols resulted in formation of the corresponding 4-arylthioquinazoline derivatives in moderate to excellent yields. This method has also been utilized to prepare 4-aryloxyquinazoline and 4-alkoxyquinazoline derivatives using phenols and sodium alkoxides as the nucleophiles.

Rechargeable Multifunctional Anti-Bacterial AEMs for Electrodialysis: Improving Anti-Biological Performance via Synergistic Antibacterial Mechanism.

Constructing a functional layer on the surface of commercial membrane (as a substrate) to inhibit the formation of biofilms is an efficient strategy to prepare an antibacterial anion exchange membrane (AEM). Herein, a rechargeable multifunctional anti-biological system is reported by utilizing the mussel-inspired L-dopa connection function on commercial AEMs. Cobalt nanoparticles (Co NPs) and N-chloramine compounds are deposited on the AEM surface by a two-step modification procedure. The anti-biofouling abilities of the membranes are qualitatively and quantitatively analyzed by adopting common Gram-negative (E. coli) and Gram-positive (S. aureus & Bacillus) bacteria as model biofouling organisms. The optimized membrane exhibits a high stability concerning the NaCl solution separation performance within 240 min. Meantime, the mechanism of the anti-adhesion is un-veiled at an atomic level and molecular dynamics (MD) simulation are conducted to measure the interaction, adsorption energy and average loading by using lipopolysaccharide (LPS) of E. coli. In view of the superior performance of antibacterial surfaces, it is believed that this work could provide a valuable guideline for the design of membrane materials with resistance to biological contamination.

A general and facile one-pot process of isothiocyanates from amines under aqueous conditions.

A general and facile one-pot protocol for the preparation of a broad range of alkyl and aryl isothiocyanates has been developed from their corresponding primary amines under aqueous conditions. This synthetic process involves an in situ generation of a dithiocarbamate salt from the amine substrate by reacting with CS(2) followed by elimination to form the isothiocyanate product with cyanuric acid as the desulfurylation reagent. The choice of solvent is of decisive importance for the successful formation of the dithiocarbamate salt particularly for highly electron-deficient substrates. This novel and economical method is suitable for scale-up activities.

Ligand-free iridium-catalyzed regioselective C-H borylation of indoles.

We herein report a ligand-free Ir-catalyzed C-H borylation of N-acyl protected indoles. This simple protocol could tolerate a variety of functional groups, affording C3 borylated indoles in good yields with excellent regioselectivities. We also demonstrated that the current method is amenable to gram-scale borylation and the C-B bonds could be easily converted to C-C and C-heteroatom bonds.

Ni-catalyzed reductive decyanation of nitriles with ethanol as the reductant.

A nickel-catalyzed reductive decyanation of aromatic nitriles has been developed, in which the readily available and abundant ethanol was applied as the hydride donor. Various functional groups on the aromatic rings, such as alkoxyl, amino, imino and amide, were compatible in this catalytic protocol. Heteroaryl, benzylic and alkenyl nitriles were also tolerated. Mechanistic investigation indicated that ethanol provided hydride efficiently via ß-hydride elimination in this reductive decyanation.