Green extraction and purification of chondroitin sulfate from jumbo squid cartilage by a novel procedure combined with enzyme, ultrasound and hollow fiber dialysis.

Chondroitin sulfate (ChS) from marine sources is gaining attention. The purpose of this study was to extract ChS from jumbo squid cartilage (Dosidicus gigas) using ultrasound-assisted enzymatic extraction (UAEE). An ultrasound with protease assistance, including either alcalase, papain or Protin NY100 was used to extract ChS. The results showed that alcalase had the best extraction efficiency. The response surface methodology was employed to evaluate the relationship between extraction conditions and extraction yield of ChS. The ridge max analysis revealed a maximum extraction yield of 11.9 mg ml- 1 with an extraction temperature of 59.40 °C, an extraction time of 24.01 min, a pH of 8.25, and an alcalase concentration of 3.60%. Compared to ethanol precipitation, purification using a hollow fiber dialyzer (HFD) had a higher extraction yield of 62.72% and purity of 85.96%. The structure characteristics of ChS were identified using FTIR, 1 H-NMR, and 13 C-NMR to confirm that the purified ChS structure was present in the form of chondroitin-4-sulfate and chondroitin-6-sulfate. The results of this study provide a green and efficient process for extraction and purification of ChS and are essential for the use of ChS for the development and production of nutrient food products or pharmaceuticals. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05701-7.

Ultrasound Plus Vacuum-System-Assisted Biocatalytic Synthesis of Octyl Cinnamate and Response Surface Methodology Optimization.

Cinnamic acid is one of the phenolic compounds that is isolated from cinnamon, or other natural plants, and has a wide range of physiological activities. However, the application of cinnamic acid is limited due to its poor solubility and low oral bioavailability. In this study, the feasibility of producing octyl cinnamate by ultrasonic assistance, combined with a rotary evaporation under vacuum, was studied using methyl cinnamate and octanol as the starting materials. A Box-Behnken design (BBD) was employed to evaluate the effects of the operation parameters, including reaction temperature (55-75 °C), reaction time (4-12 h), and ultrasonic power (90-150 W) on the production of octyl cinnamate. Meanwhile, the synthesis process was further optimized by the modeling response surface methodology (RSM). The data indicated that octyl cinnamate was efficiently synthesized from methyl cinnamate and octanol using the ultrasound plus vacuum system; further, this system was superior to the conventional method. According to the RSM model for the actual experiments, a reaction temperature of 74.6 °C, a reaction time of 11.1 h, and an ultrasound power of 150 W were determined to be the best conditions for the maximum molar conversion of octyl cinnamate (93.8%). In conclusion, the highly efficient synthesis of octyl cinnamate by a rotary evaporator with an ultrasound plus vacuum system was achieved via RSM optimization.

Chitosan-Based Anti-Oxidation Delivery Nano-Platform: Applications in the Encapsulation of DHA-Enriched Fish Oil.

Refined cobia liver oil is a nutritional supplement (CBLO) that is rich in polyunsaturated fatty acids (PUFAs), such as DHA and EPA; however, PUFAs are prone to oxidation. In this study, the fabrication of chitosan-TPP-encapsulated CBLO nanoparticles (CS@CBLO NPs) was achieved by a two-step method, including emulsification and the ionic gelation of chitosan with sodium tripolyphosphate (TPP). The obtained nanoparticles were inspected by dynamic light scattering (DLS) and showed a positively charged surface with a z-average diameter of between 174 and 456 nm. Thermogravimetric analysis (TGA) results showed the three-stage weight loss trends contributing to the water evaporation, chitosan decomposition, and CBLO decomposition. The loading capacity (LC) and encapsulation efficiency (EE) of the CBLO loading in CS@CBLO NPs were 17.77-33.43% and 25.93-50.27%, respectively. The successful encapsulation of CBLO in CS@CBLO NPs was also confirmed by the Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) techniques. The oxidative stability of CBLO and CS@CBLO NPs was monitored by FTIR. As compared to CBLO, CS@CBLO NPs showed less oxidation with a lower generation of hydroperoxides and secondary oxidation products after four weeks of storage. CS@CBLO NPs are composed of two ingredients that are beneficial for health, chitosan and fish oil in a nano powdered fish oil form, with an excellent oxidative stability that will enhance its usage in the functional food and pharmaceutical industries.

Optimization of Light Intensity, Temperature, and Nutrients to Enhance the Bioactive Content of Hyperforin and Rutin in St. John's Wort.

St. John's wort (Hypericum perforatum L.) is a medicinal plant that alleviates depression and other disorders due to its abundance of active ingredients. Hyperforin, rutin, and melatonin are the main active, and important, ingredients in St. John's wort that alleviate depression. In order to investigate the optimal conditions for accumulating these active ingredients, design of experiments and response surface methodology (RSM) was employed in this study. Two-month-old St John's wort plants were cultivated in growth chambers at varying temperatures, light intensities, and nutrient solution concentrations before analysis by HPLC, for determining differences in hyperforin, rutin, and melatonin content. The results showed that hyperforin and rutin contents were significantly influenced by temperature (18-23 °C) and light intensity (49-147 µmol m-2 s-1 photosynthetic photon flux density (PPFD)), whereas Hoagland's nutrient solution concentration (25-75%) had little effect. The accumulation of melatonin might not be influenced by cultivation conditions. Light intensity and temperature are easily controlled environmental factors in artificial cultivation, both of which are related to secondary metabolite production in the plant. Based on RSM, the optimal conditions for the accumulation of hyperforin and rutin were obtained. The maximum content of hyperforin was 5.6 mg/g, obtained at a temperature of 19 °C, a nutrient solution concentration of 45%, and a light intensity of 49 µmol m-2 s-1 PPFD. The maximum content of rutin was 3.8 mg/g obtained at a temperature of 18 °C, a nutrient solution concentration of 50%, and a light intensity of 147 µmol m-2 s-1 PPFD. This evaluation of suitable conditions for the accumulation of bioactive compounds in St. John's wort can be applied to plant factories on a large scale.

Comparison of Artificial Neural Networks and Response Surface Methodology towards an Efficient Ultrasound-Assisted Extraction of Chlorogenic Acid from Lonicera japonica.

Chlorogenic acid (CGA), a bioactive compound commonly found in plants, has been demonstrated possessing nutraceutical potential in recent years. However, the more critical issue concerning how to improve production efficacy of CGA is still limited. It is a challenge to harvest a large amount of CGA without prolonging extraction time. In this study, the feasibility of using ultrasound for CGA extraction from Lonicera japonica was investigated. A central composite design (CCD) was employed to evaluate the effects of the operation parameters, including temperature, ethanol concentration, liquid to solid ratio, and ultrasound power on CGA yields. Meanwhile, the process of ultrasound-assisted extraction was optimized through modeling response surface methodology (RSM) and artificial neural network (ANN). The data indicated that CGA was efficiently extracted from the flower of Lonicera japonica by ultrasound assistance. The optimal conditions for the maximum extraction of CGA were as follows: The temperature at 33.56 °C, ethanol concentration at 65.88%, L/S ratio at 46:1 mL/g and ultrasound power at 150 W. ANN possessed greater optimization capacity than RSM for fitting experimental data and predicting the extraction process to obtain a maximum CGA yield. In conclusion, the process of ultrasound-assisted extraction can be well established by a methodological approach using either RSM or ANN, but it is worth mentioning that the ANN model used here showed the superiority over RSM for predicting and optimizing.

An Efficient Approach for Lipase-Catalyzed Synthesis of Retinyl Laurate Nutraceutical by Combining Ultrasound Assistance and Artificial Neural Network Optimization.

Although retinol is an important nutrient, retinol is highly sensitive to oxidation. At present, some ester forms of retinol are generally used in nutritional supplements because of its stability and bioavailability. However, such esters are commonly synthesized by chemical procedures which are harmful to the environment. Thus, this study utilized a green method using lipase as a catalyst with sonication assistance to produce a retinol derivative named retinyl laurate. Moreover, the process was optimized by an artificial neural network (ANN). First, a three-level-four-factor central composite design (CCD) was employed to design 27 experiments, which the highest relative conversion was 82.64%. Further, the optimal architecture of the CCD-employing ANN was developed, including the learning Levenberg-Marquardt algorithm, the transfer function (hyperbolic tangent), iterations (10,000), and the nodes of the hidden layer (6). The best performance of the ANN was evaluated by the root mean squared error (RMSE) and the coefficient of determination (R²) from predicting and observed data, which displayed a good data-fitting property. Finally, the process performed with optimal parameters actually obtained a relative conversion of 88.31% without long-term reactions, and the lipase showed great reusability for biosynthesis. Thus, this study utilizes green technology to efficiently produce retinyl laurate, and the bioprocess is well established by ANN-mediated modeling and optimization.

Highly Efficient Synthesis of an Emerging Lipophilic Antioxidant: 2-Ethylhexyl Ferulate.

Ferulic acid in ester form has shown a stronger ability in ameliorating certain pathological conditions and inhibiting lipid oxidation. In present study, a solvent-free and reduced pressure evaporation system was developed for lipase-catalyzed synthesis of 2-ethylhexyl ferulate (2-EF) from ferulic acid and 2-ethylhexanol. A Box-Behnken design with response surface methodology (RSM) and artificial neural network (ANN) was selected to model and optimize the process. Based on the yields of 2-EF, reaction temperature was shown to be the most important process factor on the molar conversion among all variables. The residual values and the coefficient of determination (R²) calculated from the design data indicated that ANN was better than RSM in data fitting. Overall, the present lipase-catalyzed approach for 2-EF synthesis at low reaction temperature in a reduced pressure evaporation system shows high 2-EF production efficiency. Notably, this approach can reduce the enzyme denaturation and ferulic acid oxidation that usually occur during long-term biosynthetic operations at high temperature.

Antibacterial Peptide CecropinB2 Production via Various Host and Construct Systems.

Cecropin is a cationic antibacterial peptide composed of 35-39 residues. This peptide has been identified as possessing strong antibacterial activity and low toxicity against eukaryotic cells, and it has been claimed that some types of the cecropin family of peptides are capable of killing cancer cells. In this study, the host effect of cloning antibacterial peptide cecropinB2 was investigated. Three different host expression systems were chosen, i.e., Escherichia coli, Bacillus subtilis and Pichia pastoris. Two gene constructs, cecropinB2 (cecB2) and intein-cecropinB2 (INT-cecB2), were applied. Signal peptide and propeptide from Armigeres subalbatus were also attached to the gene construct. The results showed that the best host for cloning cecropinB2 was P. pastoris SMD1168 harboring the gene of pGAPzαC-prepro-cecB2 via Western blot confirmation. The cecropinB2 that was purified using immobilized-metal affinity chromatography resin showed strong antibacterial activity against the Gram-negative strains, including the multi-drug-resistant bacteria Acinetobacter baumannii.

Development of an enzymatic chromatography strip with nicotinamide adenine dinucleotide-tetrazolium coupling reactions for quantitative l-lactate analysis.

In this study, a dry assay of l-lactate via the enzymatic chromatographic test (ECT) was developed. An l-lactate dehydrogenase plus a nicotinamide adenine dinucleotide (NADH) regeneration reaction were applied simultaneously. Various tetrazolium salts were screened to reveal visible color intensities capable of determining the lactate concentrations in the sample. The optimal analysis conditions were as follows. The diaphorase (0.5 µl, 2(-6)U/µl) was immobilized in the test line of the ECT strip. Nitrotetrazolium blue chloride (5 µl, 12 mM), l-lactate dehydrogenase (1 µl, 0.25U/µl), and NAD(+) (2µl, 1.5×10(-5)M) were added into the mobile phase (100 µl) composed of 0.1% (w/w) Tween 20 in 10mM phosphate buffer (pH 9.0), and the process was left to run for 10 min. This detection had a linear range of 0.039 to 5mM with a detection limit of 0.047 mM. This quantitative analysis process for l-lactate was easy to operate with good stability and was proper for the point-of-care testing applications.

Optimized ultrasound-assisted extraction of phenolic compounds from Polygonum cuspidatum.

In this study the phenolic compounds piceid, resveratrol and emodin were extracted from P. cuspidatum roots using ultrasound-assisted extraction. Multiple response surface methodology was used to optimize the extraction conditions of these phenolic compounds. A three-factor and three-level Box-Behnken experimental design was employed to evaluate the effects of the operation parameters, including extraction temperature (30-70 °C), ethanol concentration (40%-80%), and ultrasonic power (90-150 W), on the extraction yields of piceid, resveratrol, and emodin. The statistical models built from multiple response surface methodology were developed for the estimation of the extraction yields of multi-phenolic components. Based on the model, the extraction yields of piceid, resveratrol, and emodin can be improved by controlling the extraction parameters. Under the optimum conditions, the extraction yields of piceid, resveratrol and emodin were 10.77 mg/g, 3.82 mg/g and 11.72 mg/g, respectively.

Ultrasonic-assisted extraction of the botanical dietary supplement resveratrol and other constituents of Polygonum cuspidatum.

The roots of Polygonum cuspidatum produce several phenolic compounds, including trans-resveratrol (1), trans-piceid (2), and emodin (3), and are a commercial source of the botanical dietary supplement 1. Ultrasonic-assisted extraction technology and conventional shaking extraction procedures were compared for the extraction of 1-3 from P. cuspidatum roots, using 50% ethanol as a food grade solvent. These compounds were extracted successfully, and their mass transfer coefficients were calculated by fitting the experimental results to a model derived from Fick's second law. The results indicated that ultrasonic-assisted extraction had higher mass transfer efficacies and extraction yields for 1-3 as compared with conventional shaking extraction. Under the extraction conditions used (extraction temperature 50 °C; ultrasonic power 150 W), yields of 3.5, 9.2, and 7.8 mg/g were obtained for 1-3, respectively.

Green and efficient production of octyl hydroxyphenylpropionate using an ultrasound-assisted packed-bed bioreactor.

A solvent-free system to produce octyl hydroxyphenylpropionate (OHPP) from p-hydroxyphenylpropionic acid (HPPA) and octanol using immobilized lipase (Novozym® 435) as a catalyst in an ultrasound-assisted packed-bed bioreactor was investigated. Response-surface methodology (RSM) and a three-level-three-factor Box-Behnken design were employed to evaluate the effects of reaction temperature (x1), flow rate (x2) and ultrasonic power (x3) on the percentage of molar production of OHPP. The results indicate that the reaction temperature and flow rate were the most important variables in optimizing the production of OHPP. Based on a ridge max analysis, the optimum conditions for OHPP synthesis were predicted to consist of a reaction temperature of 65°C, a flow rate of 0.05 ml/min and an ultrasonic power of 1.74 W/cm² with a yield of 99.25%. A reaction was performed under these optimal conditions, and a yield of 99.33 ± 0.1% was obtained.

Lipase catalyzed acetylation of 3,5,4'-trihydroxystilbene: optimization and kinetics study.

The use of immobilized lipase from Candida antarctica (Novozym(®) 435) to catalyze acetylation of trans-3,5,4'-trihydroxystilbene was investigated in this study. Response surface methodology and 5-level-4-factor central composite rotatable design were adopted to evaluate the effects of synthesis variables, including reaction time (24-72 h), temperature (25-65 °C), substrate molar ratio (1:15-1:75), and enzyme amount (600-3,000 PLU) on the percentage molar conversion of trans-4'-O-acetyl-3,5-dihydroxystilbene. The results showed that reaction temperature and enzyme amount were the most important parameters on percentage molar conversion. Based on ridge max analysis, the optimum conditions for synthesis were: reaction time 60 h, reaction temperature 64 °C, substrate molar ratio 1:56 and enzyme amount 2,293 PLU. The molar conversion of actual experimental values was 95% under optimal conditions. The synthesis product was analyzed using HPLC, mass and NMR. The results revealed that the major product was trans-4'-O-acetyl-3,5-dihydroxystilbene. The reaction kinetics was found to follow the Ping-Pong mechanism; substrate inhibition was not found at high vinyl acetate concentration.

High yield of wax ester synthesized from cetyl alcohol and octanoic acid by lipozyme RMIM and Novozym 435.

Wax esters are long-chain esters that have been widely applied in premium lubricants, parting agents, antifoaming agents and cosmetics. In this study, the biocatalytic preparation of a specific wax ester, cetyl octanoate, is performed in n-hexane using two commercial immobilized lipases, i.e., Lipozyme(®) RMIM (Rhizomucor miehei) and Novozym(®) 435 (Candida antarctica). Response surface methodology (RSM) and 5-level-4-factor central composite rotatable design (CCRD) are employed to evaluate the effects of reaction time (1-5 h), reaction temperature (45-65 °C), substrate molar ratio (1-3:1), and enzyme amount (10%-50%) on the yield of cetyl octanoate. Using RSM to optimize the reaction, the maximum yields reached 94% and 98% using Lipozyme(®) RMIM and Novozym(®) 435, respectively. The optimum conditions for synthesis of cetyl octanoate by both lipases are established and compared. Novozym(®) 435 proves to be a more efficient biocatalyst than Lipozyme(®) RMIM.

Enzymatic synthesis of rose aromatic ester (2-phenylethyl acetate) by lipase.

BACKGROUND: 2-Phenylethyl acetate (2-PEAc) is a highly valued natural volatile ester with a rose-like odour that is widely used to add scent or flavour to cosmetics, soaps, foods and drinks. In this study, 2-PEAc was synthesised enzymatically by transesterification of vinyl acetate with 2-phenethyl alcohol catalysed by immobilised lipase (Novozym(®) 435) from Candida antarctic RESULTS: Response surface methodology and a three-level/three-factor Box-Behnken design were used to evaluate the effects of time, temperature and enzyme amount on the molar conversion % of 2-PEAc. The results showed that temperature was the most important variable. Based on the ridge max analysis results, optimum enzymatic synthesis conditions were predicted as a reaction time of 79 min, a temperature of 57.8 °C and an enzyme amount of 122.5 mg. The predicted and experimental yields were 86.4 and 85.4% respectively. CONCLUSION: Three immobilised lipases were screened and 15 reaction conditions were tested in order to find the combination for maximum yield. The optimisation of 2-PEAc synthesis catalysed by Novozym(®) 435 was successfully developed. The kinetic study of this transesterification reaction showed that it followed an ordered ping-pong bi-bi mechanism without any inhibition by reactants.

Evaluation on the use of reactive dye-modified polylysine as the biomarker in immunochromatographic test application.

An improved dye immunochromatographic test (DICT) using polylysine (PL) as conjugate spacer loading dye molecules to enhance chromophor color intensity with the potential of a simultaneous multicolored assay has been developed. To construct this new effective chromophor, a dyeing process coupling a reactive dye, Procion Blue MX-7RX (PB7RX), with PL of different molecular weights was performed. The optimal conjugate condition between PB7RX and PL was studied. It showed that under the optimized dyeing conditions, a PL molecular weight of 189.4 kDa and a molar ratio (mol dye/mol amine group in PL) of 1.5 were obtained. The resulting dyed PL chromophor, used as both a spacer and a color intensifier, was further labeled to a model antibody, anti-human serum albumin (anti-HSA), to build a PB7RX-PL-anti-HSA (PPA) conjugate. The PPA obtained in this way generated the highest color intensity of 19,455 assayed by immunochromatographic test strip under densitometer scanning. A competitive DICT for determination of HSA was carried out. A linear range between 0 and 18.77 µg/ml with a detection limit of 0.49 µg/ml was observed. A test for using dyed PL chromophors as biomarkers was also performed to demonstrate the feasibility of a multianalyte immunoassay.

Continuous production of lipase-catalyzed biodiesel in a packed-bed reactor: optimization and enzyme reuse study.

An optimal continuous production of biodiesel by methanolysis of soybean oil in a packed-bed reactor was developed using immobilized lipase (Novozym 435) as a catalyst in a tert-butanol solvent system. Response surface methodology (RSM) and Box-Behnken design were employed to evaluate the effects of reaction temperature, flow rate, and substrate molar ratio on the molar conversion of biodiesel. The results showed that flow rate and temperature have significant effects on the percentage of molar conversion. On the basis of ridge max analysis, the optimum conditions were as follows: flow rate 0.1 mL/min, temperature 52.1°C, and substrate molar ratio 1 : 4. The predicted and experimental values of molar conversion were 83.31 ± 2.07% and 82.81 ± .98%, respectively. Furthermore, the continuous process over 30 days showed no appreciable decrease in the molar conversion. The paper demonstrates the applicability of using immobilized lipase and a packed-bed reactor for continuous biodiesel synthesis.

Ultrasonic-Assisted Extraction and Structural Characterization of Chondroitin Sulfate Derived from Jumbo Squid Cartilage.

Chondroitin sulfate (ChS) is usually used as an oral nutraceutical supplement, and has been popular in Asia, Europe, and United States for many years. In this study, a potential and sustainable source of ChS from jumbo squid (Dosidicus gigas) cartilage was explored; ultrasound-assisted extraction (UAE) was used to extract ChS from jumbo squid cartilage. The result of mass transfer coefficients based on Fick's law showed that UAE had higher mass transfer efficacy. The response surface methodology (RSM) combined with Box-Behnken design (BBD) was employed to evaluate the effects of the extraction parameters. The optimal conditions were extraction temperature of 52 °C, extraction time of 46 min, and NaOH concentration of 4.15%. The crude extract was precipitated by 50% ethanol, which obtained a purified ChS with 23.7% yield and 82.3% purity. The purified ChS measured by energy-dispersive X-ray spectroscopy (EDX) had a carbon to sulfur molar ratio of approximately 14:1. The FTIR, 1H, and 13C NMR confirmed jumbo squid ChS were present in the form of chondroitin-4-sulfate and chondroitin-6-sulfate, with a 4S/6S ratio of 1.62. The results of this study provide an efficient process for production and purification of ChS, and are significant for the development and utilization of ChS from jumbo squid cartilage in the nutrient food or pharmaceutical industries.

Concentration of Docosahexaenoic and Eicosapentaenoic Acid from Cobia Liver Oil by Acetone Fractionation of Fatty Acid Salts.

The production of docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) concentrate from cobia liver oil by acetone fractionation of fatty acid salts was investigated in this study. A three-level-three-factor Box-Behnken design was used to evaluate the effects of reaction time, amount of NaOH added, and acetone ratio on the responses (DHA and EPA content and recovery). The results showed that the amount of NaOH added was the most important factor in the process. The DHA content showed an inverse relation with EPA content and recovery, whereas its content increased proportionally with the amount of NaOH added. With a reaction time of 1.51 h, amount of NaOH added at 0.65 times the molar equivalent of free fatty acid (FFA), and acetone ratio at 13.92, a maximum recovery of DHA + EPA was 98.14%, and the obtained concentrate contained 71.23% DHA + EPA. Finally, the lipase-catalyzed esterification of the DHA + EPA concentrate with glycerol was carried out. The acetone fractionation of fatty acid salts is an efficient technique for producing DHA +EPA concentrate. The DHA +EPA concentrate can be used as starting materials for the production of functional lipids to provide n-3 polyunsaturated fatty acids to the consumers.

Bioprocessed Production of Resveratrol-Enriched Rice Wine: Simultaneous Rice Wine Fermentation, Extraction, and Transformation of Piceid to Resveratrol from Polygonum cuspidatum Roots.

A new bioprocess to produce resveratrol-enriched rice wine was established and the effects of adding Polygonum cuspidatum root powder to rice wine fermentation were investigated. In this new process, piceid and resveratrol were extracted from P. cuspidatum roots to rice wine and piceid was converted to resveratrol by ß-glucosidase during fermentation. After 10 days co-fermentation, rice wine with high levels of resveratrol was obtained, which contained ~14% (v/v) ethanol, 122 mg/L piceid, and 86 mg/L resveratrol. The resveratrol-enriched rice wine had enhanced antioxidant activity with significantly stronger 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, ferric ion reducing power, and ferrous ion chelating capability. Ultrafiltration (UF) was employed in this study using hollow fibers to clarify the end product, increase shelf life without heat treatment, and maintain the quality of the phenolic compounds. The boiled and UF-treated rice wine were evaluated for ethanol, piceid, resveratrol, clarity, aerobic plate count, total acidity, pH, reducing sugars, and amino acids. The quality of the resveratrol-enriched rice wine was maintained after four weeks storage at normal refrigeration temperatures.