Amphiphilic Ionic Liquids Capable to Formulate Organized Systems in an Aqueous Solution, Designed by a Combination of Traditional Surfactants and Commercial Drugs.

The present review describes the state of the art in the conversion of pharmaceutically active ingredients (API) in amphiphilic Ionic Liquids (ILs) as alternative drug delivery systems. In particular, we focus our attention on the compounds generated by ionic exchange and without original counterions which generate different systems in comparison with the simple mixtures. In water, these new amphiphiles show similar or even better properties as surfactants in comparison with their precursors. Cations such as 1-alkyl-3-methyl-imidazolium and anions such as dioctyl sulfosuccinate or sodium dodecyl sulfate appear as the amphiphilic components most studied. In conclusion, this work shows interesting information on several promissory compounds and they appear as an interesting challenge to extend the application of ILs in the medical field.

Is it Necessary for the Use of Fluorinated Compounds to Formulate Reverse Micelles in a Supercritical Fluid? Searching the Best Cosurfactant to Create "Green" AOT Reverse Micelle Media.

Herein, we report the effect of employing two different alcohols, such as n-pentanol and 2,2,3,3,4,4,5,5-octafluoro pentanol (from now on F-pentanol), into 1,4-bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles (RMs), to determine the interfacial activity and establish the best candidate to act as a cosurfactant in supercritical RMs. Dynamic light scattering (DLS), Fourier transform infrared (FT-IR), and fluorescence emission spectroscopy allowed us to determine and understand the behavior of alkanols in RMs. As a result, we found interesting displacements of alkanol molecules within the RMs, suggesting that the electrostatic interaction between SO3- and Na+ weakens because of new interactions of n-pentanol with SO3- through H-bonds, changing the curvature of the micellar interface. According to FT-IR and DLS studies, F-pentanol forms a RM polar core interacting through intermolecular H-bonds, suggesting no perturbations of the AOT RM interface. Hence, n-pentanol was selected as a cosurfactant to form supercritical RMs, which is confirmed by red edge excitation shift studies, using C343 as a molecular probe. Herein, we were able to create RMs under supercritical conditions without the presence of modified surfactants, fluorinated or multitailed compounds, which, to the best of our knowledge, was not shown before.

How the external solvent in biocompatible reverse micelles can improve the alkaline phosphatase behavior.

In the last decade, the nature of the nonpolar solvents that can be part of reverse micelles (RMs) has been the topic of several investigations to improve their applications. In this sense, the hydrolysis of 1-naphthyl phosphate catalyzed by the enzyme alkaline phosphatase (AP) was used as a probe to investigate the effect of the change of the external solvent on RMs formulated with the anionic surfactant sodium diethylhexyl sulfosuccinate (AOT). As external nonpolar solvents, two biocompatible lipophilic esters, isopropyl myristate and methyl laurate, and the traditional nonpolar solvents, n-heptane and benzene, were used. The results were compared among the RMs investigated and with the reaction in homogeneous media. Thus, the effect of the nanoconfinement as well as the impact of the replacement of a conventional external nonpolar solvent by biocompatible solvents were analyzed. The results indicate that the catalytic efficiency in the AOT RMs is larger than that in homogeneous media, denoting a different hydration level over the AP enzyme, which is directly related to the different degrees of nonpolar solvent penetration to the RM interface. Our findings demonstrated that toxic solvents such as n-heptane and benzene can be replaced by nontoxic ones (isopropyl myristate or methyl laurate) in AOT RMs without affecting the performance of micellar systems as nanoreactors, making them a green and promising alternative toward efficient and sustainable chemistry.

Influence of the AOT Counterion Chemical Structure on the Generation of Organized Systems.

The impact of the imidazolium counterion structure on the organized systems formed by the surfactant 1,4-bis-2-ethylhexylsulfosuccinate, AOT, both in aqueous solutions and in nonpolar solvents is investigated. With this in mind, we investigated if the ionic liquid-like (IL-like) surfactant 1-ethyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, emim-AOT, forms direct micelles or vesicles in water. Dynamic light scattering, zeta potential, conductivity, fluorescence spectroscopy, and UV-visible spectroscopy measurements were performed to characterize the organized systems in aqueous solutions. We also studied the self-aggregation of emim-AOT, 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, bmim-AOT, and of 1-hexyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, hmim-AOT, in nonpolar solvents. The results obtained showed that the IL-like surfactant emim-AOT forms direct micelles in water, as sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) does. However, emim-AOT aggregates are larger, have a lower surface charge, are more stable, and have a more polar and less fluid micellar interface than Na-AOT micelles. It was also observed that emim-AOT and hmim-AOT form reverse micelles in nonpolar solvents. The size of the imidazolium cations dramatically influences the size of the reverse micelles and their ability to solubilize water.

Use of Ionic Liquids-like Surfactants for the Generation of Unilamellar Vesicles with Potential Applications in Biomedicine.

The goal of this work is to understand the influence of the counterion nature on the organized systems formed by 1,4-bis-2-ethylhexylsulfosuccinate surfactants in aqueous solutions and how these aggregates will influence the deoxyribonucleic acid (DNA)-surfactant interactions. With this in mind, two ionic liquid-like surfactants were investigated: 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) and 1-hexyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (hmim-AOT). Measurements of dynamic light scattering, ζ-potential, transmission electron microscopy, and fluorescence and UV-visible spectroscopy were performed to study the characteristics of the vesicles formed by bmim-AOT and hmim-AOT. Regarding the determination of the interaction of the surfactants with DNA, circular dichroism was used. The results obtained showed that bmim-AOT and hmim-AOT ionic liquid-like surfactants spontaneously form unilamellar vesicles in water at very low surfactant concentrations. The characteristics of these aggregates are dependent on the length of the tail of the counterions. The length of the hydrophobic chains of the counterions also influences the DNA-surfactant interactions through hydrophobic effects.

Interfacial properties modulated by the water confinement in reverse micelles created by the ionic liquid-like surfactant bmim-AOT.

The behavior of the interfacial water entrapped in reverse micelles (RMs) that were formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) was investigated with the use of UV-Vis absorption spectroscopy and nuclear magnetic resonance (NMR) relaxometry. The solvatochromism of two molecular probes, namely, 1-methyl-8-oxyquinolinium betaine (QB) and N,N,N',N'-tetramethylethylenediamine copper(ii)acetylacetonate tetraphenylborate ([Cu(acac)(tmen)][B(C6H5)4]), was investigated. As a comparison, the analog RMs formed by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) were also explored. By varying the water content inside the RMs and consequently the different magnitude of the water-surfactant interactions at the interface, interesting properties were observed by comparing bmim-AOT and Na-AOT RMs. From the solvatochromic behavior of ([Cu(acac)(tmen)][B(C6H5)4]), we found that the interface in bmim-AOT RMs shows a smaller electron donating capacity than that in Na-AOT RMs. QB revealed that the interfacial region is a weaker hydrogen bond donor and less polar than the corresponding Na-AOT RMs. NMR experiments showed that the molecular motion of water in bmim-AOT RMs is less restricted than that of the water molecules confined in Na-AOT RMs. In summary, the results show how the nature of the bmim+ cation affects the interaction between the entrapped water and the RM interface, greatly modifying the interfacial water structure in comparison with the results known for Na-AOT.

Catanionic Reverse Micelles as an Optimal Microenvironment To Alter the Water Electron Donor Capacity in a SN2 Reaction.

The effect of interfacial water entrapped in two types of catanionic reverse micelles (RMs) on the kinetic parameters of the SN2 reaction between dimethyl-4-nitrophenylsulfonium trifluoromethanesulfonate (S+) and n-butylamine (BuNH2) was explored. Two catanionic surfactants, composed of a mixture of oppositely charged ionic surfactants without their original counterions, were used to create the RMs. Thus, benzyl- n-hexadecyldimethylammonium 1,4-bis(2-ethylhexyl) sulfosuccinate (BHD-AOT) and cetyltrimethylammonium 1,4-bis(2-ethylhexyl) sulfosuccinate (CTA-AOT) were formed. Also, the well-known anionic surfactant sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (Na-AOT) was employed as a comparison. Our results showed an important catalytic-like effect of all RMs investigated in comparison with a water-benzene mixture, and the rate constant values depend on the type of surfactant used. Faster reaction in BHD-AOT RMs than in CTA-AOT and Na-AOT RMs was observed. This behavior was attributed to the strong interaction (by hydrogen bonding with AOT anion and ion-dipole interaction with BHD+) between the entrapped water and the BHD-AOT interface, which reduces the solvation capacity of water on S+. In CTA-AOT (and Na-AOT) RMs, the water-interface interaction is weaker and the electron pairs of water can solvate S+ ions. In summary, the chemical structure of the counterion on the catanionic surfactant alters the interfacial region, allowing the progress of a reaction inside the RMs to be controlled.

Micropolarity and Hydrogen-Bond Donor Ability of Environmentally Friendly Anionic Reverse Micelles Explored by UV/Vis Absorption of a Molecular Probe and FTIR Spectroscopy.

In the present work we show how two biocompatible solvents, methyl laurate (ML) and isopropyl myristate (IPM), can be used as a less toxic alternative to replace the nonpolar component in a sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles (RMs) formulation. In this sense, the micropolarity and the hydrogen-bond ability of the interface were monitored through the use of the solvatochromism of a molecular probe (1-methyl-8-oxyquinolinium betaine, QB) and Fourier transform infrared spectroscopy (FTIR). Our results demonstrate that the micropolarity sensed by QB in ML RMs is lower than in IPM RMs. Additionally, the water molecules form stronger H-bond interactions with the polar head of AOT in ML than in IPM. By FTIR was revealed that more water molecules interact with the interface in ML/AOT RMs. On the other hand, for AOT RMs generated in IPM, the weaker water-surfactant interaction allows the water molecules to establish hydrogen bonds with each other trending to bulk water more easily than in ML RMs, a consequence of the dissimilar penetration of nonpolar solvents into the interfacial region. The penetration process is strongly controlled by the polarity and viscosity of the external solvents. All of these results allow us to characterize these biocompatible systems, providing information about interfacial properties and how they can be altered by changing the external solvent. The ability of the nontoxic solvent to penetrate or not into the AOT interface produces a new interface with attractive properties.

Effect of Confinement on the Properties of Sequestered Mixed Polar Solvents: Enzymatic Catalysis in Nonaqueous 1,4-Bis-2-ethylhexylsulfosuccinate Reverse Micelles.

The influence of different glycerol, N,N-dimethylformamide (DMF) and water mixtures encapsulated in 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane reverse micelles (RMs) on the enzymatic hydrolysis of 2-naphthyl acetate by α-chymotrypsin is demonstrated. In the case of the mixtures with DMF and protic solvents it has been previously shown, using absorption, emission and dynamic light-scattering techniques, that solvents are segregated inside the polar core of the RMs. Protic solvents anchor to the AOT, whereas DMF locates to the polar core of the aggregate. Thus, DMF not only helps to solubilize the hydrophobic substrate, increasing its effective concentrations but surprisingly, it does not affect the enzyme activity. The importance of ensuring the presence of RMs, encapsulation of the polar solvents and the corrections by substrate partitioning in order to obtain reliable conclusions is highlighted. Moreover, the effect of a constrained environment on solvent-solvent interactions in homogenous media and its impact on the use of RMs as nanoreactors is stressed.

Nanoscale Control Over Interfacial Properties in Mixed Reverse Micelles Formulated by Using Sodium 1,4-bis-2-ethylhexylsulfosuccinate and Tri-n-octyl Phosphine Oxide Surfactants.

The interfacial properties of pure reverse micelles (RMs) are a consequence of the magnitude and nature of noncovalent interactions between confined water and the surfactant polar head. Addition of a second surfactant to form mixed RMs is expected to influence these interactions and thus affect these properties at the nanoscale level. Herein, pure and mixed RMs stabilized by sodium 1,4-bis-2-ethylhexylsulfosuccinate and tri-n-octyl phosphine oxide (TOPO) surfactants in n-heptane were formulated and studied by varying both the water content and the TOPO mole fraction. The microenvironment generated was sensed by following the solvatochromic behavior of the 1-methyl-8-oxyquinolinium betaine probe and (31) P NMR spectroscopy. The results reveal unique properties of mixed RMs and we give experimental evidence that free water can be detected in the polar core of the mixed RMs at very low water content. We anticipate that these findings will have an impact on the use of such media as nanoreactors for many types of chemical reactions, such as enzymatic reactions and nanoparticle synthesis.

How the cation 1-butyl-3-methylimidazolium impacts the interaction between the entrapped water and the reverse micelle interface created with an ionic liquid-like surfactant.

The behavior of the interfacial water entrapped in reverse micelles (RMs) formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) dissolved in benzene (or chlorobenzene) was investigated using noninvasive techniques such as dynamic light scattering (DLS), static light scattering (SLS), FT-IR and (1)H NMR. The DLS and SLS results reveal the formation of discrete spherical and non-interacting water droplets stabilized by the bmim-AOT surfactant. Moreover, since the droplet size increases as the W0 (W0 = [water]/[surfactant]) value increases, water interacts with the RM interface. From FT-IR and (1)H NMR data, a weaker water-surfactant interaction in bmim-AOT RMs in comparison with the RMs created by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) is detected. Consequently, there are less water molecules interacting with the interface in bmim-AOT RMs, and their hydrogen bond network is not completely disrupted as they are in Na-AOT RMs. The results show how the nature of the new cation impacts the interaction between the entrapped water and the RM interface, modifying the interfacial water structure in comparison with the results known for Na-AOT.

A protic ionic liquid, when entrapped in cationic reverse micelles, can be used as a suitable solvent for a bimolecular nucleophilic substitution reaction.

In this work, we have explored how the confinement of the protic ionic liquid (IL) ethylammonium nitrate (EAN) inside toluene/benzyl-n-hexadecyldimethylammonium chloride (BHDC) reverse micelles (RMs) affects the Cl(-) nucleophilicity on the bimolecular nucleophilic substitution (SN2) reaction between this anion and dimethyl-4-nitrophenylsulfonium trifluoromethanesulfonate. To the best of our knowledge this is the first report where toluene/BHDC RMs use EAN as a polar component and it is used as a nanoreactor for carrying out kinetic experiments. Dynamic light scattering results reveal the formation of RMs containing the protic IL. The kinetic results show that upon confinement, EAN becomes a suitable solvent for the SN2 reaction while in homogeneous media it is a bad option. Entrapped in BHDC RMs, due to the strong hydrogen bond interactions, EAN behaves as an aprotic-like IL which cannot deactivate the nucleophilic power of Cl(-) and yet increases the substrate solubility. These facts show the versatility of this kind of organized system to alter the polar solvent entrapped and its influence on the reaction rate when it is used as a nanoreactor.

Droplet-droplet interactions investigated using a combination of electrochemical and dynamic light scattering techniques. The case of water/BHDC/benzene:n-heptane system.

In this contribution the electrochemistry of [Fe(CN)6](4-/3-) as the probe molecule was investigated in benzyl-n-hexadecyldimethylammonium chloride (BHDC) reverse micelles (RMs) varying the composition of the external solvent (benzene:n-heptane mixtures) and the surfactant concentration, at a fixed water content and probe concentration. The electrochemical and dynamic light scattering results show that in water/BHDC/benzene:n-heptane systems the aggregate sizes increase on increasing BHDC concentration. This behavior was unexpected since it is known that for water/BHDC/benzene RM systems keeping the water content constant and the surfactant concentration below 0.2 M, the droplet sizes are independent of the concentration of the surfactant. We explain the results considering that on changing the external solvent to benzene:n-heptane mixtures, RMs tend to associate in clusters and equilibrium between free RMs and droplet clusters is established. A model is presented which, using electrochemical and dynamic light scattering data, allows calculating the aggregation number of the RMs, the number of RMs that form the droplet clusters and the standard electron transfer heterogeneous rate constant.

On the characterization of NaDEHP/n-heptane nonaqueous reverse micelles: the effect of the polar solvent.

The behavior of two polar solvents, ethylene glycol (EG) and dimethylformamide (DMF), entrapped in sodium bis-(2-ethylhexyl) phosphate (NaDEHP)/n-heptane reverse micelles (RMs) was investigated using dynamic light scattering (DLS), molecular probe absorption and FT-IR spectroscopy. DLS results reveal the formation of RMs containing EG and DMF as a polar component. To the best of our knowledge this is the first report where both polar solvents are entrapped by the NaDEHP surfactant to effectively create RMs. We use the solvatochromism behavior of the molecular probe, 1-methyl-8-oxyquinolinum betaine (QB), and FT-IR spectroscopy to investigate the physicochemical properties of the non-aqueous RMs. Our results demonstrate that the NaDEHP surfactant interacts through hydrogen bonds with EG at the EG/NaDEHP interface and this interaction is responsible for destroying the bulk structure of pure solvent EG when entrapped in NaDEHP RMs. On the other hand, when DMF is incorporated inside the RMs the bulk structure of DMF is destroyed upon encapsulation by the Na-DMF interaction at the DMF/NaDEHP interface. Our results are completely different than the one observed for DMF/n-heptane/AOT. Our results show how the physicochemical properties, such as micropolarity, microviscosity and hydrogen bond interaction, of nonaqueous NaDEHP/n-heptane RMs interfaces can be dramatically changed by simply using different non-aqueous polar solvents. Thus, these results can be very useful to employ these novel RMs as nanoreactors since the dimensions of the RMs are around 10 to 20 nm.

Singularities in the physicochemical properties of spontaneous AOT-BHD unilamellar vesicles in comparison with DOPC vesicles.

In the present work, we study different physicochemical properties of the spontaneous unilamellar vesicles created by the catanionic ionic liquid-like surfactant benzyl-n-hexadecyldimethylammonium 1,4-bis-2-ethylhexylsulfosuccinate (AOT-BHD), using two different fluorescent probes: 6-propionyl-2-(dimethylaminonaphthalene), PRODAN and trans-4-[4-(dimethylamino)-styryl]-1-methylpyridinium iodide, HC. Steady-state and time resolved fluorescence emission spectroscopy allowed us to find the unique properties of the AOT-BHD bilayer in comparison with vesicles formed using the traditional phospholipid 1,2-di-oleoyl-sn-glycero-3-phosphatidylcholine, DOPC. From the emission results, we observed that the region of the bilayer close to the polar head of AOT-BHD is a powerful electron donor environment, even larger than DOPC. Additionally, the AOT-BHD bilayer offers a less polar and slightly more viscous zone than DOPC. Thus, this particular bilayer is able to produce large incorporation of ionic and nonionic molecules and is very promising to be used as a nanocarrier in pharmacological, cosmetic and food fields.

Effect of the cationic surfactant moiety on the structure of water entrapped in two catanionic reverse micelles created from ionic liquid-like surfactants.

The behavior of water entrapped in reverse micelles (RMs) formed by two catanionic ionic liquid-like surfactants, benzyl-n-hexadecyldimethylammonium 1,4-bis-2-ethylhexylsulfosuccinate (AOT-BHD) and cetyltrimethylammonium 1,4-bis-2-ethylhexylsulfosuccinate (AOT-CTA), was investigated by using dynamic (DLS) and static (SLS) light scattering, FTIR, and (1)H NMR spectroscopy techniques. To the best of our knowledge, this is the first report in which AOT-CTA has been used to create RMs and encapsulate water. DLS and SLS results revealed the formation of RMs in benzene and the interaction of water with the RM interface. From FTIR and (1)H NMR spectroscopy data, a difference in the magnitude of the water-catanionic surfactant interaction at the interface is observed. For the AOT-BHD RMs, a strong water-surfactant interaction can be invoked whereas for AOT-CTA this interaction seems to be weaker. Consequently, more water molecules interact with the interface in AOT-BHD RMs with a completely disrupted hydrogen-bond network, than in AOT-CTA RMs in which the water structure is partially preserved. We suggest that the benzyl group present in the BHD(+) moiety in AOT-BHD is responsible for the behavior of the catanionic interface in comparison with the interface created in AOT-CTA. These results show that a simple change in the cationic component in the catanionic surfactant promotes remarkable changes in the RMs interface with interesting consequences, in particular when using the systems as nanoreactors.

Supramolecular assemblies obtained by mixing different cyclodextrins and AOT or BHDC reverse micelles.

In this contribution we show the effect of the surfactant polar head and the external solvent on the incorporation of different cyclodextrins (CDs) {α-CD, ß-CD, γ-CD, decenylsuccinyl-ß-CD (Mod-ß-CD), and hydroxypropyl-ß-CD (hp-ß-CD)} in different reverse micelles (RMs) {benzene/sodium 1,4-bis(2-ethylhexyl) sulfosuccinate(AOT)/water, and benzene/benzyl-n-hexadecyldimethylammonium chloride (BHDC)/water} and compare them with previous results obtained in n-heptane/AOT/water RMs. To investigate the different systems, we have used UV-vis spectrophotometry, induced circular dichroism spectroscopy (ICD), and the achiral molecular probe methyl orange (MO). The results show dramatic differences changing the external solvent and the surfactant, which are explained by considering the differences in the RMs interface composition, the water-surfactant interaction, and the CDs' location in the different media investigated. None of the CDs were incorporated into the benzene/AOT/water RMs at any [H2O]/[surfactant] ratio studied (W0) whereas it was previously shown that Mod-ß-CD and hp-ß-CD could be included in n-heptane/AOT/water RMs. However, all of the CDs are incorporated in benzene/BHDC/water RMs at W0 > 10 and hp-ß-CD is dissolved even at W0 = 0. Different from what was found in n-heptane/AOT RMs, in BHDC RMs MO showed ICD signals with two different CDs: Mod-ß-CD and hp-ß-CD. The results are explained by considering the known difference in the interfacial water structure for AOT and BHDC RMs and the electron-rich region on the secondary hydroxyl (wider side of the CDs), which helps to solubilize all CDs in BHDC. This study shows that chiral cyclodextrin could be available for a guest in an organic medium such as the RMs. Therefore we have created a potentially powerful nanoreactor with two different confined regions in the same aggregate: the polar core of the RMs and the chiral hydrophobic cavity of cyclodextrin.

Ionic liquids entrapped in reverse micelles as nanoreactors for bimolecular nucleophilic substitution reaction. Effect of the confinement on the chloride ion availability.

In this work was explored how the confinement of two ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride (bmimCl) and 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4), inside toluene/benzyl-n-hexadecyldimethylammonium chloride (BHDC) reverse micelles (RMs) affects the Cl(-) nucleophilicity on the bimolecular nucleophilic substitution (SN2) reaction between this anion and dimethyl-4-nitrophenylsulfonium trifluoromethanesulfonate. The results obtained show that, upon confinement, the ionic interactions between the ILs with the cationic surfactant polar head group and the surfactant counterion modify substantially the performance of both ILs as solvents. In toluene/BHDC/bmimCl RMs, the Cl(-) interacts strongly with bmim(+) (and/or BHD(+)) in such a way that its nucleophilicity is reduced in comparison with neat IL. In toluene/BHDC/bmimBF4 RMs, an ionic exchange equilibrium produces segregation of bmim(+) and BF4(-) ions, changing the composition of the RMs interface and affecting dramatically the Cl(-) availability. These results show the versatility of this kind of organized system to alter the ionic organization and influence on reaction rate when used as nanoreactors.

How TOPO affects the interface of the novel mixed water/AOT:TOPO/n-heptane reverse micelles: dynamic light scattering and Fourier transform infrared spectroscopy studies.

In this work we report for the first time the formation of two reverse micelle (RM) media produced by the nonionic surfactant tri-n-octyl phosphine oxide (TOPO) in n-heptane and the one produced by mixing the anionic sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT) with different TOPO contents dissolved in n-heptane. Dynamic light scattering (DLS) experiments reveal the formation of water/TOPO/n-heptane RMs (TOPO RMs) and water/AOT:TOPO/n-heptane RMs (mixed RMs) since the droplet sizes increase as the water content increases. The addition of TOPO to the system at constant W0 (W0 = [water]/([AOT] + [TOPO])) causes the droplet sizes of mixed RMs to decrease compared with the AOT RMs. In addition, the decrease is larger when the water content is low (W0 = 0.5) but the effect is negligible at the maximum W0 value analyzed (W0 = 2). These results are not expected for mixtures of different nonionic surfactants with AOT and were explained considering the unique TOPO structure. Thus, at W0 = 0.5, we suggest that the percentage of TOPO molecules at the mixed RM interface is higher than those corresponding to the bulk solution. On the other hand, at W0 = 2 the RM interface is comprised mainly of AOT molecules. The FT-IR experiments performed by monitoring monodeuterated water frequency (ν(OD)) in TOPO RMs show bound and "bulk-like" water structure even at very low water content. On the other hand, for mixed RMs the water structure depends on the water content. At low W0 value, there are two kinds of water molecules, and at W0 value around 2 only bound water exists. The Fourier transform infrared (FT-IR) experiments performed on the symmetric (ν(s)SO3) and asymmetric (ν(a)SO3) sulfonate stretching bands of AOT reveal the existence of a strong Na(+)˙TOPO complex in the mixed RMs. The results show that adding TOPO to form mixed surfactant RMs with AOT reduces their size, changes the nature of water to have a "bulk-like" character and diminishes the ion pairing of the sulfonate group with Na(+).

Enzymatic hydrolysis of N-benzoyl-L-tyrosine p-nitroanilide by α-chymotrypsin in DMSO-water/AOT/n-heptane reverse micelles. A unique interfacial effect on the enzymatic activity.

The reverse micelle (RM) media are very good as nanoreactors because they can create a unique microenvironment for carrying out a variety of chemical and biochemical reactions. The aim of the present work is to determine the influence of different water-dimethyl sulfoxide (DMSO) mixtures encapsulated in 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane RMs on the enzymatic hydrolysis of N-benzoyl-L-tyrosine p-nitroanilide (Bz-Try-pNA) by α-chymotrypsin (α-CT). The reaction was first studied in homogeneous media at different DMSO-water mixture compositions and in DMSO-water/AOT/n-heptane RMs. The hydrolysis rates of Bz-Try-pNA catalyzed by α-CT were determined by UV-vis spectroscopy. The reaction follows the Michaelis-Menten mechanism and the kinetic parameters: kcat, KM, and kcat/KM were evaluated under different conditions. In this homogeneous media, DMSO plays an important role in the solubilization process of the peptide which is almost insoluble in water, but it has a tremendous impact on the inactivation of α-CT. It is shown that the enzyme dissolved in a 20% molar ratio of the DMSO-water mixture does not present enzymatic activity. Dynamic light scattering has been used to assess the formation of DMSO-water/AOT/heptane RMs at different DMSO compositions. The results also show that there is preferential solvation of the AOT RM interface by water molecules. To test the use of these RMs as nanoreactors, the kinetic parameters for the enzymatic reaction in these systems have been evaluated. The parameters were determined at fixed W(S) {W(S) = ([water] + [DMSO])/[AOT] = 20} at different DMSO-water compositions. The results show that the Michaelis-Menten mechanism is valid for α-CT in all the RM systems studied and that the reaction takes place at the RM interface. Surprisingly, it was observed that the enzyme encapsulated by the RMs show catalytic effects with similar kcat/KM values at any DMSO composition investigated, which evidence that DMSO molecules are localized far from the RM interface.