Marginal gaps and voids using two warm compaction techniques and different sealers: a micro-CT study.

OBJECTIVE: To assess the percentage of marginal gaps and voids in oval-shaped canals obturated by using two warm compaction techniques with a Bio-C sealer and AH Plus Jet. MATERIALS AND METHODS: Forty canines with oval canals were scanned by microcomputed tomography (micro-CT), and root canal preparation was performed with an XP-endo Shaper system and irrigated with 5.25% sodium hypochlorite. Then, the specimens were paired into four groups (n=10) according to the root canal filling technique and endodontic sealer: Bio-C sealer and continuous wave of condensation, Bio-C sealer and Tagger's hybrid, AH Plus Jet and continuous wave of condensation, and AH Plus Jet and Tagger's hybrid. After root canal filling, a new scan was performed. The percentage of marginal gaps and voids was calculated with the ImageJ software, and the data were analyzed statistically using two-way ANOVA and Tukey tests, with a significance level of 5%. RESULTS: The percentage of marginal gaps was significantly lower in the Bio-C sealer than in AH Plus Jet (p=0.021) regardless of the technique. However, no difference was found in the percentage of voids between root canal filling techniques and the endodontic sealer (p>0.05). CONCLUSION: Both sealers and techniques demonstrated good quality of root canal filling. However, the use of the Bio-C sealer enhanced the filling ability by reducing marginal gaps, regardless of the root canal filling technique. CLINICAL RELEVANCE: This study highlights the better performance of the Bio-C sealer in the quality of the root canal filling, reducing marginal gaps when compared to AH Plus Jet independent of the technique.

Managing Cracked Teeth with Root Extension: A Prospective Preliminary Study Using Biodentine™ Material.

Purpose: The authors of this study proposed an innovative approach involving the use of Biodentine™ material as an intraorifice barrier in cracked teeth with root extension to promote internal crack sealing, preventing the possibility of microinfiltration and apical crack propagation. Materials and Methods: The dental records of 11 patients with 12 posterior cracked teeth with root extension were included with a precise protocol performed by a senior endodontist. The treatment protocol included pulp diagnosis, crack identification using a dental operating microscope (DOM), endodontic treatment, placing a Biodentine™ as an intraorifice barrier, and immediate full-coverage restoration. The effectiveness of the treatment was assessed at two intervals, 6 months, and 1-3 years posttreatment, evaluating clinical, radiographic, and tomographic aspects. The treatment was deemed successful if there were no indications of radiolucency, sinus tracts, edema, or periodontal pockets associated with the crack line. Results: The study observed remarkably positive outcomes during the follow-up period, which spanned from 1 to 3 years. All the cracked teeth (100%) remained asymptomatic, meaning they were free of pain or discomfort. Furthermore, these teeth were in occlusal function. Both radiographic and tomographic assessments revealed the absence of bone loss along the crack line. This outcome signifies that the treatment effectively prevented further deterioration of the surrounding bone. Conclusions: Integrating advanced biomaterials and conservative restorative techniques has paved the way for innovative approaches in dental care. This protocol suggests a proactive step for managing cracked teeth with root extension. It addresses both biological aspects by sealing internal cracks and mechanical aspects by preventing crack progression, thereby improving these teeth' prognosis and long-term survival.

Influence of smear layer removal and application mode of MTA on the marginal adaptation in immature teeth: a SEM analysis.

OBJECTIVES: This study was an ex vivo evaluation of the marginal adaptation of mineral trioxide aggregate as an apical barrier using teeth with an open apex and scanning electron microscopy. MATERIALS AND METHODS: Eighteen single-rooted human teeth were used. An artificial open apex was created using Gates Glidden drills #6-1 in a crown-down manner until the #1 bur passed through the foramen. A 1.36-mm divergent open apex was created at the foramen by retrograde apical transportation using a #40 Profile 0.6 taper instrument inserted to the length of the cutting blade. The teeth were divided into four groups (n = 4), and two teeth served as controls. The GI = mineral trioxide aggregate (MTA) was placed as a 5-mm-thick apical barrier without removal of the smear layer; GII = MTA was placed with indirect ultrasonic activation; GIII = apical plug was placed after removal of the smear layer without indirect ultrasonic activation; and GIV = MTA was placed with indirect ultrasonic activation, but the smear layer had been previously removed. The root apices were visualized with SEM (1000×), and 12 predetermined material/dentine interface points were measured (gaps). One-way anova and Bonferroni's post hoc tests were used to compare the linear measurements of the gaps between the groups. RESULTS: GIV had the lowest gap when compared with other groups, and no statistical differences were found among GI, GII, and GIII. CONCLUSIONS: The technique of MTA placement using passive ultrasonic vibration in association with smear layer removal improved the marginal adaptation of the material.

Endodontic cement penetration after removal of calcium hydroxide dressing using XP-endo finisher.

We aimed to evaluate the penetration of endodontic cement following the removal of calcium hydroxide (Ca(OH)2) dressing using the XP-endo Finisher in association with different irrigating solutions. Sixty premolars were instrumented and applied with a Ca(OH)2 dressing. To remove Ca(OH)2, the teeth were divided into six groups, each with a different volume of sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic acid (EDTA), as well as solution stirring time with XP-endo Finisher (0, 30, and 60 sec). Root canals were filled using the lateral condensation technique. Fluorescein dye was added to the cement for microscopic laser scanning analysis. In the generated images, linear measurements were taken in micrometers, and their averages were calculated. To analyze the perimeter penetration ratio of the cement, the total perimeter of the canal and the segment of the total perimeter of the canal where the endodontic cement penetrated into the dentinal tubules were measured in micrometers. We found that using an XP-endo Finisher in irrigation was more effective than using a needle and syringe during the extension and penetration of endodontic cement. Shaking with XP-endo Finisher with 17% EDTA increased the extent and perimeter of the penetration of the endodontic cement into the dentinal tubules. However, using the XP-endo Finisher with EDTA only was more efficient than using the instrument interchangeably in NaOCl and EDTA. Although XP-endo Finisher contributes to the removal of Ca(OH)2, none of the protocols or instruments used removed all Ca(OH)2 from the root system.

The thermoplastic techniques or single-cone technique on the quality of root canal filling with tricalcium silicate-based sealer: An integrative review.

Background: The filling of the root canal system (RCS) is an important step in endodontic treatment and aims to obtain a three-dimensional sealing of the root canal spaces to prevent bacterial contamination. For this, the selection of an appropriate sealer must be performed synchronously with the choice of the root canal filling technique. This study aims, through an integrative review, to evaluate the quality of root canal filling by comparing thermoplastic and single-cone (SC) techniques. Material and Methods: The Medline/PubMed, Scopus, Web of Science and Virtual Health Library (VHL) databases were used to find articles published until November 2021. The eligibility criteria comprised articles that evaluating the quality of root canal filling comparing thermoplastic techniques with the SC technique using tricalcium silicate-based sealer. Studies that evaluated primary teeth, endodontic retreatment or perforations, different outcomes, and studies that considered artificial teeth or different sealer and material for obturation of different techniques were excluded. For articles that were not available for access, an additional contact with authors were considered. A total of 1699 articles were found. After duplicate removal, the title and abstract of 828 articles were screened. Sixteen articles were considered for full-text analysis, but only ten articles met the eligibility criteria. Data extracted from the studies were discussed and tabulated to allow the comparison of desired factors. Results: Concerning the formation of gaps/voids, the thermoplastic techniques showed better results than the SC technique in 3 articles. On the other hand, 2 articles reported no statistical difference between the tested techniques. In addition, about the penetration of tricalcium silicate-based sealer in the dentinal tubules, of the 5 articles selected, in 4 there was no significant difference between the tested techniques and only one study showed better penetration of the sealer when using thermoplastic techniques. Conclusions: The thermoplastic technique was better in most selected studies regarding gaps and voids, but regarding the penetration of the sealer into the tubules, both techniques were effective. Key words:Root canal filling, thermoplastic techniques, tricalcium silicate.

Dentinal microcracks induced by endodontic procedures: A scientometric and bibliometric analysis.

Background: Due to the large number of publications relating the occurrence of dental microcracks to endodontic procedures, this bibliometric study evaluated the scientific pattern and trends in literature and provided an overview of scientific production in this context. Aim: To analyze, quantify, and characterize the scientific production and trends of published articles evaluating dentinal microcracks formation after endodontic treatment procedures between 2010 and 2020 using bibliometric indicators. Materials and Methods: Published articles were found by the search in the Medline (PubMed) and Scopus database using the combination of the following keywords: Dentinal crack OR Dentinal Microcrack OR Crack formation OR Dentin Defect AND Endodontic treatment OR Root canal preparation OR Canal Preparation OR Root canal treatment OR endodontic procedures. The search was also conducted in the Journal of Endodontics and International Endodontic Journal. After inclusion and exclusion criteria application, data from all studies included were collected. Results: Among the 556 results after the search, 45 studies were included and analyzed in this bibliometry. No trend was observed in terms of the increasing number of articles over time. Most of them used an in vitro design, compared the effect of different endodontic techniques/systems for root canal instrumentation on dentinal microcracks formation, and were conducted in Turkey, Brazil, and India. Journal of Endodontics and International Endodontic Journal were the main journals with a higher number of articles published. Interestingly, studies conducted with some funding did not lead to higher citation numbers. Moreover, a relevant proportion of studies did not consider the inclusion of control groups, baseline evaluation, or statistical analysis. Micro-CT was the main technique used to evaluate microcrack presence. Conclusion: Microcrack formation after the use of different endodontic techniques/systems has been constantly evaluated in the literature. There is a pattern of methodologies used, which may explain the concentration of these studies in specific journals and countries.

The Correlation of Crack Lines and Definitive Restorations with the Survival and Success Rates of Cracked Teeth: A Long-term Retrospective Clinical Study.

INTRODUCTION: Cracked teeth frequently require protective adhesive restorations. This long-term, longitudinal retrospective clinical study aimed to evaluate the factors influencing the success and survival rates of cracked teeth with crack lines (CLs) in different directions when restored early with onlays or full-coverage crowns. METHODS: The dental records of 71 patients with a total of 86 cracked teeth with different pulpal and periapical diagnoses and with follow-ups spanning over 1-11 years were included. Data regarding the demographics; clinical symptoms and signs; bruxism; occlusal interferences; eating habits; pulpal and periapical diagnoses; number, direction, location, and extent of CLs; probing depth; and coronary condition before and after the placement of definitive restorations were collected. Univariate associations between tooth survival and explanatory variables were assessed. The long-term survival rate was estimated using Kaplan-Meier analysis and the log-rank test. A multivariate analysis was performed using Cox regression analysis. RESULTS: The overall success rate was 93.0%, and the overall survival estimates of cracked teeth restored early were 98.6%, 94.9%, and 55.9% at the 1-, 5-, and 11-year follow-ups, respectively. The direction of the CLs did not influence the survival of the tooth. No significant association was observed between the type of tooth, probing depth, root canal treatment, and tooth loss (P > .05). The multivariate analysis showed that previously treated cracked teeth (P < .05), the provision of onlay restorations (P < .05), and the placement of posts (P < .05) had higher correlations with tooth loss. Additionally, the placement of full-coverage crowns resulted in lower tooth loss compared with the placement of onlays (P < .05). CONCLUSIONS: Previous endodontic treatment in teeth that subsequently develop CLs has a negative impact on the survival rate of the teeth. Moreover, early placement of full-coverage crowns should be implemented for cracked teeth regardless of the direction or the number of CLs because it is associated with a higher cracked tooth survival rate.

The efficacy of a cervical barrier in preventing microleakage of Enterococcus faecalis in endodontically treated teeth.

The clinical failure of coronal restorations can compromise the healthy periapical status of endodontically treated teeth. The purpose of the present ex vivo study was to assess the effectiveness of the cervical barrier in preventing bacterial microleakage in the eventual loss of the coronal restoration. Following removal of the smear layer and obturation to the cementoenamel junction using gutta-percha, 70 single-rooted mandibular premolars were randomly divided into five different groups: Group 1 received no additional treatment; Groups 2 and 3 had 2 mm and 3 mm of the obturation removed, respectively, followed by placement of a cervical barrier that was the same thickness as the obturation. In Group 4 (positive control), the root canals were filled only with gutta-percha, while in Group 5 (negative control), the root canals were completely impermeabilized following obturation. The filled root canals were incorporated into a split-chamber model system using Enterococcus faecalis as a microbial marker. The apices were suspended in the lower chambers. Leakage was determined daily for 60 days and evaluated for turbidity. According to Fisher's exact test, the cervical barrier in Groups 2 and 3 prevented the microleakage of E. faecalis into the root canals when compared with Groups 1 and 4. This result was similar to that for the completely sealed samples in Group 5 (p = 0.001).

Two and Three-dimensional Parameters in Cone-beam Computed Tomography Monitoring of Apical Periodontitis in Traumatized Teeth: Case Report and Long-term Follow-up.

Assessment of apical periodontitis (AP) is a challenging task. This case report highlights the CBCT diagnosis and monitoring of periapical radiolucency (PR) using ITK-SNAP software 3.8v in a complex clinical scenario of three traumatized anterior teeth. An 11-year-old male patient complained of recurrent swelling and pain in the maxillary incisor region (teeth #11 and #21). His parents reported a history of traumatic injury affecting these teeth two years back. Digital periapical radiographic (DPR) and cone-beam computed tomography (CBCT) were requested. PR was identified on teeth #11, #21, and # 22. In tooth #22, besides a PR, an area suggesting internal root resorption or oblique root fracture was observed. The teeth were shaped and dressing with calcium hydroxide Ca(OH)2. MTA repair was delivered to the apical portion of the canals (approximately 3 mm). The remainder of the canal was filled with thermoplastic gutta-percha and Endosequence sealer. After one year, the patient returned complaining of pain in tooth #11. Radiographically, the PR of tooth #11 did not reduce. A CBCT was taken, showing a reduction of radiolucency. The patient was clinical and radiographically re-evaluated for 6 months, and he remained asymptomatic. After three years of follow-up, the patient suffered a new trauma on teeth #11 and #21. As tooth #11 presents mobility and biting pain, a new CBCT was requested due to the risk of a possible root fracture. So, the PR was synchronously monitored with linear measurements and volumetric analysis using ITK-SNAP software 3.8v. In this case, the volumetric evaluation was essential to identify the PR's correct dimensions, reducing image interpretation's subjectivity. At 48-month follow-up, the patient was symptoms free and radiographically showed a reduction in the PR's size, compatible with osseous healing.

Root canal shaping of curved canals by Reciproc Blue system and Pro Taper Gold: A micro-computed tomographic study.

BACKGROUND: This study aimed to evaluate the centralization and transportation of ProTaper Gold (PTG) rotary system and Reciproc Blue (RB) reciprocating system in curved canals, by using micro-CT. MATERIAL AND METHODS: Twenty extracted mandibular molars were previously scanned by using the SkyScan 1174 microtomograph to select the Vertucci IV anatomic type. The specimens were divided into two groups (n=10) according to the mechanized system used to prepare the root canals. The teeth were scanned by micro-CT to calculate the increase volume, percentage of dentin removed, remaining dentin thickness, structure model index (SMI), degree of transportation and centering ability of root canals. The Student's t test was used to evaluate differences between PTG and RB in each measurement evaluated. RESULTS: No significant differences were found between the groups in the increase of the total root canal and apical volume; percentage of dentin removed after preparation; SMI of the mesiolingual canal; degree of transportation of the canal and centering ability of the cervical and middle thirds (P>0.05). There were significant differences in the mesiobuccal canal in SMI and in the centering ability of the apical third (P<0.05). Concerning the remaining dentin thickness, there was also no significant diferences between the groups, except for some regions were RB was observed to have a superior cutting capacity (P<0.05). CONCLUSIONS: Both systems were efficient and safe for performing preparation of the moderately curved root canals of mandibular molars. RB instruments produced more circular and better centralized canals in the apical third of the mesiobuccal canal, with superior cutting action when compared with PTG instruments. Key words:Nickel-titanium instrument, heat treatment, micro-computed tomography, canal transportation.

Micro-CT evaluation of maxillary first molars: interorifice distances and internal anatomy of the mesiobuccal root.

This study aimed to describe the morphometric relationship of root canal orifices on the pulp floor in the presence/absence of mesiobuccal second canal (MB2) in the maxillary first molars and other aspects of its internal anatomy. Sixty-two maxillary first molars were scanned by micro-CT. The presence of the MB2 canal was verified. The distance between the center points of the MB1, MB2, distobuccal (DB), and palatal (P) canal orifices on the pulp floor were measured (MB1-MB2, MB1-DB, MB2-DB, MB1-P, and DB-P). The MB1-P to DB-P ratio was calculated. The distances between the anatomic apex and the MB1 and MB2 apical foramina were measured. The length of the band-shaped isthmus was also measured. Student's t-test was applied to verify the association between the presence of an MB2 canal, the interorifice distances, and the ratio of the MB1-P to DB-P distance (α = 5%). The MB2 canal was present in 43 roots (69.35%). Statistics showed significant differences when MB2 was present for the largest MB1-P distance (p < 0.05) and higher values for the MB1-P to DB-P ratio (p < 0.05). A band-shaped isthmus was detected in 25.8% of MB roots. The mean distance from the apical foramen to the isthmus floor ranged from 1.74 for MB1 canals to 1.42 for MB2 canals. Canal orifice distances on the pulp floor may predict the presence of MB2 canals. There was a high incidence of isthmus, accessory canals, and apical delta in the critical apical zone in MB roots of maxillary first molars.

Bio-C Repair - A New Bioceramic Material for Root Perforation Management: Two Case Reports.

These case reports aimed to describe the management of lateral perforation in the middle cervical third of the root in two maxillary incisors with pulp canal calcification using Bio-C Repair, with safe and viable clinical treatment strategies. Digital radiographic exams were obtained with different angles and analyzed using different filters. Cone-beam computed tomography (CBCT) images were requested to show the actual position of the canal, location of the perforation, and guide the strategic planning of the case. Subsequently, cavity access was prepared with the aid of dental operating microscopy. After perforation was identified, granulation tissue was removed and the original canal was identified and then dressed with calcium hydroxide. In the second visit, the perforation was filled with Bio-C Repair and the canal system filled with gutta-percha points and a root canal sealer (Bio-C Sealer). The teeth were restored with glass fiber post, 4 mm beyond the perforation level, and provisory crowns. Both teeth treated as described above were functional and asymptomatic with a 1-year clinical and radiographic assessment. The Bio-C Repair is suggested as a new cement option for the management of lateral canal perforations, with effective results as observed after a one-year follow-up.

Dentinal Microcracks Induced by Endodontic Procedures: Suggested Design for Experimental Studies Using Micro-Computed Tomography and Strain Gauges.

INTRODUCTION: The present study aimed to describe an in vitro study model to investigate root surface strain (RSS) and its correlation with the initiation/propagation of microcracks during different endodontic procedures. METHODS: Four lower human incisors extracted microcrack free were selected by micro-computed tomographic imaging. Two strain gauges were bonded to the root surface of each incisor. Then, the teeth were prepared to reproduce the periodontal ligament artificially. The gauges were attached to a data acquisition system. The RSS was recorded during the entire endodontic procedure, which consisted of accessing the endodontic cavity, cleaning, shaping preparation with an Mtwo rotary system (VDW, Munich, Germany), and filling with a standardized technique. Each incisor was submitted to a different retreatment protocol and supplementary cleaning method as follows: (1) Reciproc (RC, VDW) + Flatsonic (FS; Helse, Santa Rosa de Viterbo, Brazil), (2) RC + XP-endo Finisher (XPF; FKG Dentaire, La Chaux-de-Fonds, Switzerland), (3) Mtwo retreatment (MR) + FS, and (4) MR + XPF. Finally, the teeth were rescanned to establish the postoperative microcrack formation by 2 well-trained and blinded examiners. RESULTS: The maximum and minimum RSS values were -120 and 510 microstrains, respectively, for all of the files. RC showed the highest RSS values during endodontic retreatment compared with MR. FS demonstrated a higher variation between the minimum and maximum RSS than XPF. No microcracks were observed in the specimens. CONCLUSIONS: This preliminary study proposed an experimental model that would combine 2 methods to evaluate the effects of endodontic systems on dentin. Although strain gauges would provide data on the stresses created, the pre- and postoperative evaluation of micro-computed tomographic images would enable microcrack formation to be determined.

Push-out bond strength and marginal adaptation of apical plugs with bioactive endodontic cements in simulated immature teeth.

OBJECTIVES: This study evaluates the bond strength and marginal adaptation of mineral trioxide aggregate (MTA) Repair HP and Biodentine used as apical plugs; MTA was used as reference material for comparison. MATERIALS AND METHODS: A total of 30 single-rooted teeth with standardized, artificially created open apices were randomly divided into 3 groups (n = 10 per group), according to the material used to form 6-mm-thick apical plugs: group 1 (MTA Repair HP); group 2 (Biodentine); and group 3 (white MTA). Subsequently, the specimens were transversely sectioned to obtain 2 (cervical and apical) 2.5-mm-thick slices per root. Epoxy resin replicas were observed under a scanning electron microscope to measure the gap size at the material/dentin interface (the largest and smaller gaps were recorded for each replica). The bond strength of the investigated materials to dentin was determined using the push-out test. The variable bond strengths and gap sizes were evaluated independently at the apical and cervical root dentin slices. Data were analyzed using descriptive and analytic statistics. RESULTS: The comparison between the groups regarding the variables' bond strengths and gap sizes showed no statistical difference (p > 0.05) except for a single difference in the smallest gap at the cervical root dentin slice, which was higher in group 3 than in group 1 (p < 0.05). CONCLUSIONS: The bond strength and marginal adaptation to root canal walls of MTA HP and Biodentine cement were comparable to white MTA.

The importance of bioceramics and computed tomography in the late clinical management of a horizontal root fracture: A case report.

Root fractures resulting from dental trauma involve dentin, cementum and pulp. The present study aimed to demonstrate the importance of cone-beam computed tomography (CBTC) and bioceramics in the correct planning and intervention of a horizontal root fracture case in tooth 11 with late treatment in an 18-year-old patient. Clinical and radiographic examinations revealed tooth displacement, pain on vertical percussion and images suggestive of a horizontal root fracture. Pulp necrosis was diagnosed and CBTC was requested for treatment planning. Subsequently, endodontic treatment was performed using a bioceramic apical plug. A 2-year follow-up indicated the absence of root resorption and normal periodontal and periapical tissues. It was concluded that endodontic treatment associated with the use of bioceramics and the aid of CBTC is an effective therapeutic option in cases of permanent horizontal root fractures. Key words:Bioceramics, Cone-beam computed tomography, dental Injuries, root fracture.

Optimization of Results for Cracked Teeth Using CAD-CAM System: A Case Series.

Different restorative techniques have been proposed for the treatment of posterior teeth affected by cracked tooth syndrome (CTS). However, the literature is scarce in protocols of how to solve CTS using ceramic restorations made by computer aided design-computer aided manufacturing (CAD-CAM) system. CAD-CAM provides a fast and efficient restorative treatment usually in a single visit, reducing the risk of contamination and micro-infiltration of the cracked line. The objective of this work was to describe 3 clinical cases of cracked teeth, which presented vertical fracture lines in different directions and extension through the pulp, restored by CAD-CAM system, with 5-year follow-up. Patients with short-term spontaneous masticatory pain, cold sensibility and restored teeth without cuspal coverage were selected. Digital radiographs (DR) were taken to confirm the pulp and periapical status. Periodontal probing depth, sensitivity, percussion, and occlusion tests were performed. The fracture lines with their direction and extension were identified under dental optical microscope (DOM). The treatment plan was performed in two stages: immediate treatment to stabilize the tooth and minimize pain, and final restorative treatment by CAD-CAM system to stabilize the crack. Patients were between the ages of 37 and 45 years. Most of the studied teeth presented extensive restorations without cuspal coverage. The presence of occlusal interference, in lateral movement, was a constant finding. Endodontic treatment was performed in cases of irreversible pulpitis or pulpal necrosis. In all three cases, cavity preparation was performed for full coverage restorations, as the fracture lines extended in several directions, requiring a re-enforcement of the cervical region of the teeth in question. The survival rate of the reported cases was 100% with 5-year clinical and radiographic follow-up, suggesting that CAD-CAM system may be a promising alternative treatment in the management of CTS, improving tooth longevity.

Apexification in a traumatized tooth with mineral trioxide aggregate: an interesting case report of root formation / Apicificação em dente traumatizado com agregado trióxido mineral: relato de um interessante caso de formação radicular

ABSTRACT Mineral trioxide aggregate (MTA) has been indicated for apexification because it has desirable properties such as excellent biocompatibility, low solubility and dimensional stability. This procedure consists of inducing root apex formation in teeth with incomplete root formation. This article reports a case of trauma in a young dental element, with necrotic pulp and incomplete root formation. For its treatment, apexification with white MTA was performed, which showed excellent results in inducing the continuity of root formation with mineralized tissue in the apical portion. Therefore, MTA is a viable option for apexification, bringing as its main advantage, faster treatment and immediate coronary rehabilitation of the dental element.

RESUMO O agregado trióxido mineral (do inglês, mineral trioxide agregatte - MTA) por possuir propriedades desejáveis como ótima biocompatibilidade, baixa solubilidade e estabilidade dimensional pode ser utilizado para apicificação. Este procedimento consiste na indução da formação do ápice radicular em dentes com rizogênese incompleta. Esse artigo relata um caso de trauma em um elemento dental jovem, com polpa necrosada e rizogênese incompleta. Para seu tratamento, realizou-se a apicificação com MTA branco, que demonstrou excelente resultado ao induzir a continuidade de formação da raiz com tecido mineralizado na porção apical. Portanto, o MTA é uma opção viável para a apicificação, trazendo como principal vantagem, um rápido tratamento e a possibilidade de restauração coronária imediata do dente.

Scanning Electron Microscopic Evaluation of Smear Layer Removal Using Isolated or Interweaving EDTA with Sodium Hypochlorite.

INTRODUCTION: The aim of this study was to verify the effect of alternating 2.5% sodium hypochlorite (NaOCl) and 17% ethylenediaminetetraacetic acid (EDTA) on the smear layer removal from root canal surfaces. METHODS AND MATERIALS: A total of 15 single-rooted human teeth, instrumented with ProTaper files, were randomly distributed in 3 groups. In group 1 (n=7) the canals were irrigated with 1 mL of 2.5% NaOCl between files and final irrigation was done with 1 mL of 2,5% NaOCl, followe by 1 mL of 17% EDTA, for a perio of 15 sec with new irrigtion of 1 mL of 2,5% NaOCl at each change of files. In group 3 (control group) (n=1), saline solution was used. All samples were cleaved into two sections, metalized and analyzed under scanning electron microscopy (SEM). The presence or absence of smear layer in the cervical, middle and apical thirds, with scores varying from 1 to 3, respectively were evaluated. The data were submitted to nonparametric Mann-Whitney U test. The level of significance was set at 0.05. RESULTS: It was observed that there was a greater discrepancy between groups with respect to the apical third. In the other areas there was a greater similarity between the scores attributed to the groups. There was a statistically significant difference between the groups only in the apical third, when group 1 presented the higher median (P<0.05). CONCLUSION: The alternating use of EDTA during instrumentation with NaOCl was the most effective irrigation method to remove the apical smear layer. Both forms of irrigation were effective on removal of the smear layer in the coronal and middle thirds of the canals.

Effect of bleaching agents on enamel surface of bovine teeth: A SEM study.

BACKGROUND: This study aimed to evaluate changes in the enamel surface of bovine teeth after whitening with exogenous bleaching agents: 10% carbamide peroxide (group 1), 16% carbamide peroxide (group 2) and 35% hydrogen peroxide activated by a light-emitting diode (LED) (group 3). The evaluations were performed by scanning electron microscopy (SEM). MATERIAL AND METHODS: Ninety bovine teeth were divided into five groups (n = 18). The bleaching agents 10% and 16% carbamide peroxide were applied for eight hours a day for 14 consecutive days. The third agent, LED-activated 35% hydrogen peroxide, was used four times at seven-day intervals. Each of the four time points consisted of three applications of 10 minutes each. A 37% phosphoric acid solution and artificial saliva were used as positive and negative controls, respectively. RESULTS: The evaluations by SEM showed changes in the enamel surfaces of the specimens. Based on the Mann-Whitney statistical test, the data showed significant differences (p<0.05) between groups 1 and 2 and between groups 2 and 3. However, no significant difference (p>0.05) was observed between groups 1 and 3. CONCLUSIONS: Based on these results, it can be concluded that bleaching agents can cause changes in the structure of tooth enamel and that these changes are related to the concentration and the duration of contact with the tooth surface. Key words:Bovine teeth, carbamide peroxide, enamel, hydrogen peroxide, scanning electronic microscopy.

Clinical Approach to Pulp Canal Obliteration: A Case Series.

This article describes four cases with safe and feasible clinical treatment strategies for anterior teeth with pulp canal obliteration (PCO) using cone-beam computed tomography (CBCT), digital radiography (DR), dental operating microscopy (DOM) and ultrasonic tips (US). Four anterior teeth with PCO were chosen. DR was taken with different angulations and analyzed with different filters. Subsequently, the access cavity was performed with the aid of DOM. If the canal was not identified, CBCT was requested. Sagittal and axial slices guided the direction of the ultrasonic tips. After identification of the canal, it was then negotiated and instrumented with the rotary instruments. All four canals were successfully identified, with no complications. In case 1, the canal was identified using DR, DOM and US tips. In cases 2, 3 and 4, the canals were identified with DR, DOM, US tips and CBCT. Complete root canal obliteration identified in radiography did not necessarily mean that pulp tissue was not visible clinically, either. The clinical evaluation of the access cavity with the aid of MO was crucial. If the canal was not identified, CBCT was mandatory in order to show more detailed view of the precise position of the canals, their directions, degrees of obstruction and dimensions. It served as a guide for the direction of the ultrasonic tips to keep them within the pulp chamber safely, with a low risk of iatrogenic injury.