Lipase immobilization on biodegradable film with sericin.

An ecofriendly and low-cost film composed by cassava starch, polyvinyl alcohol, and sericin blend (CS-PVA-SS) was synthesized, characterized, and applied as a novel support for Botryosphaeria ribis EC-01 lipase immobilization by enzyme-film-enzyme adsorption. Film revealed thickness between 230 and 309 µm and higher flexibility and malleability in comparison with film without SS. Based on p-nitrophenyl palmitate hydrolysis reaction, the activity retention of immobilized lipase was 987%. For optimal conditions, the yield in ethyl oleate was 95% for immobilized enzyme. Maximum yield was obtained at 49°C, molar ratio oleic acid:ethanol of 1:3, 1.25 g lipase film or 50 U (1.03 ± 0.03 mg protein) and 30 h. Even after seven cycles of use, immobilized lipase showed 52% reduction in ester yield. Biodegradable and biorenewable film is a promising material as a support to immobilize lipases and application in biocatalysis.

Production of starch-polyester bio-support for lipases immobilization: synergistic action of itaconic acid and nanoclay.

The objective of the present work was to develop biodegradable polymeric films (starch-PBAT) as support for the immobilization of lipases using sodium montmorillonite (MMT) as a reinforcing agent (2% w/w) and itaconic acid (IA - 0.5-1.5% w/w) as a compatibilizing agent. The films were produced through a two steps blow-extrusion. The addition of MMT increased the tensile strength and Tg of the films, while the presence of IA made the films more flexible, reducing their Tg. Lipases from Burkholderia cepacia LTEB11 were immobilized in the films by the adsorption method. The ester yield (% of ethyl oleate synthesis) has shown best results (96%, 6 h) for immobilized enzyme in the MMT film and six cycles of reuse were carried out until a reduction of 50% in the catalytic activity of the enzyme.

Biodegradable Polymer Packaging System for 'Benitaka' Table Grapes during Cold Storage.

A biodegradable polymer packaging system for 'Benitaka' table grapes (Vitis vinifera L.) was developed to inhibit the development of gray mold during refrigerated storage. The system consisted of packages and sachets containing Na2S2O5 to release sulfur dioxide (SO2), both produced with biodegradable films of starch, glycerol, and poly (adipate co-butylene terephthalate) (PBAT) produced via blown extrusion. The films were characterized in terms of thickness, density, mass loss in water, water vapor permeability, sorption isotherms, and mechanical properties. The table grapes were packed with biodegradable plastic bags containing SO2-releasing sachets inside. The experimental design was completely randomized, with four repetitions and five treatments: (a) control, without sachet containing Na2S2O5 and SiO2; (b) 2 g of Na2S2O5 + 2 g of SiO2; (c) 4 g of Na2S2O5 + 1 g of SiO2; (d) 4 g of Na2S2O5 + 2 g of SiO2; and (e) 4 g of Na2S2O5 + 4 g of SiO2. The bunches were stored in a refrigerated chamber at 1 ± 1 °C and relative humidity above 90%. The treatments were evaluated 30 and 45 days after the beginning of refrigerated storage and 3 days at room temperature. The grapes were evaluated based on the incidence of gray mold, mass loss, stem browning, shattered berries, and berry bleaching. The data were subjected to the analysis of variance, and the means were compared using Tukey's test at 5%. The biodegradable films had good processability during the production via blown extrusion, with good physical properties to be used in the packaging of grapes and the production of SO2-releasing sachets. The biodegradable polymer packaging system (biodegradable plastic bags + SO2-releasing sachets) inhibited the development of gray mold on 'Benitaka' table grapes for 45 days at 1 °C, preserving their quality, with low mass loss, few shattered berries, and rachis freshness.