RESUMO
Elucidating the mechanical forces between two solid surfaces immersed in a communal liquid environment is crucial for understanding and controlling adhesion, friction, and electrochemistry in many technologies. Although traditional models can adequately describe long-range mechanical forces, they require substantial modifications in the nanometric region where electronic effects become important. A hybrid quantum-classical model is employed herein to investigate the separation-dependent disjoining pressure between two metal surfaces immersed in an electrolyte solution under potential control. We find that the pressure between surfaces transits from a long-range electrostatic interaction, attractive or repulsive depending on the charging conditions of surfaces, to a strong short-range van der Waals attraction and then an even strong Pauli repulsion due to the redistribution of electrons. The underlying mechanism of the transition, especially the attractive-repulsive one in the short-range region, is elucidated. This work contributes to the understanding of electrotunable friction and lubrication in a liquid environment.
RESUMO
Nonaqueous organic aluminum batteries are considered as promising high-safety energy storage devices due to stable ionic liquid electrolytes and Al metals. However, the stability and capacity of organic positive electrodes are limited by their inherent high solubility and low active organic molecules. To address such issues, here porphyrin compounds with rigid molecular structures present stable and reversible capability in electrochemically storing AlCl2 +. Comparison between the porphyrin molecules with electron-donating groups (TPP-EDG) and with electron-withdrawing groups (TPP-EWG) suggests that EDG is responsible for increasing both highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels, resulting in decreased redox potentials. On the other hand, EWG is associated with decreasing both HOMO and LUMO energy levels, leading to promoted redox potentials. EDG and EWG play critical roles in regulating electron density of porphyrin π bond and electrochemical energy storage kinetics behavior. The competitive mechanism between electrochemical redox reaction and de/adsorption processes suggests that TPP-OCH3 delivers the highest specific capacity ~171.8â mAh g-1, approaching a record in the organic Al batteries.
RESUMO
The relationship between interface structure (e. g., the facet of the solid phase and the configuration of solvation) and the reactivity of the corresponding electrode is a critical issue in electrochemistry. Compared to macroscopic electrode measurements, electrochemical methods established on the single-particle scale have advantages in establishing the structure-property relationship. In recent years, great achievements have been made in electrochemical energy storage and electrocatalysis that allow the evolution and kinetics of electrodes to be understood by employing single-particle measurements. This concept aims to provide an overview of the update of single-particle measurements in related electrochemical processes. Furthermore, the challenges and prospects for the development and application of single-particle measurements are also discussed.
RESUMO
The consistency of lithium-ion battery performance is the key factor affecting the safety and cycle life of battery packs. Surface engineering of electrodes in production processes plays an important role in improving the consistency of battery performance. In this study, the drying process in the electrode manufacturing process is studied as the effect on surface engineering of the electrode materials, with consideration on impacting the battery performance. Specifically, the solid content of the slurry and drying temperature are considered to be the two factors that affect conductive agent dispersion uniformity in the porous electrodes. To achieve surface engineering on the dispersion uniformity of the conductive agent, the optimal processing parameters can be obtained by adjusting the temperature and solid content of the slurry. The mechanism of dispersion uniformity of the conductive agent is mainly related to the polyvinylidene fluoride grid structure. In the manufacturing of lithium-ion batteries, the electrode coated with 66% solid slurry and dried at 90-100 °C presents stable energy storage performance, which is beneficial to maintain the stable performance of the battery pack in the application.
RESUMO
For significantly increasing the energy densities to satisfy the growing demands, new battery materials and electrochemical chemistry beyond conventional rocking-chair based Li-ion batteries should be developed urgently. Rechargeable aluminum batteries (RABs) with the features of low cost, high safety, easy fabrication, environmental friendliness, and long cycling life have gained increasing attention. Although there are pronounced advantages of utilizing earth-abundant Al metals as negative electrodes for high energy density, such RAB technologies are still in the preliminary stage and considerable efforts will be made to further promote the fundamental and practical issues. For providing a full scope in this review, we summarize the development history of Al batteries and analyze the thermodynamics and electrode kinetics of nonaqueous RABs. The progresses on the cutting-edge of the nonaqueous RABs as well as the advanced characterizations and simulation technologies for understanding the mechanism are discussed. Furthermore, major challenges of the critical battery components and the corresponding feasible strategies toward addressing these issues are proposed, aiming to guide for promoting electrochemical performance (high voltage, high capacity, large rate capability, and long cycling life) and safety of RABs. Finally, the perspectives for the possible future efforts in this field are analyzed to thrust the progresses of the state-of-the-art RABs, with expectation of bridging the gap between laboratory exploration and practical applications.
RESUMO
Owing to high-efficiency and scalable advantages of electrolysis in molten salts, electrochemical conversion of carbonaceous resources into graphitic products is a sustainable route for achieving high value-added carbon. To understand the complicated kinetics of converting amorphous carbon (e.g. carbonized lignin-biochar) into highly graphitic carbon, herein this study reports the key processing parameters (addition of Ni, temperature and time) and multi-scale approach of nickel-boosted electrochemical graphitization-catalysis processes in molten calcium chloride. Upon both experiments and modellings, multi-scale analysis that ranges from nanoscale atomic reaction to macroscale cell reveal the multi-field evolution in the electrolysis cell, mechanism of electrochemical reaction kinetics as well as pathway of nickel-boosted graphitization and tubulization. The results of as-achieved controllable processing regions and multi-scale approaches provide a rational strategy of manipulating electrochemical graphitization processes and utilizing the converted biomass resources for high value-added use.
RESUMO
Objectives: To evaluate the clinical effect of magnesium aluminum carbonate combined with rabeprazole-based triple therapy in the treatment of patients with Helicobacter pylori-positive gastric ulcer associated with hemorrhage. Methods: A total of 80 patients with Helicobacter pylori-positive gastric ulcer associated with hemorrhage admitted to the Baoding First Central Hospital from January 2019 to December 2020 were selected and randomly divided into two groups, with 40 cases in each group. The control group were given rabeprazole-based triple therapy, while the experimental group were treated with magnesium aluminum carbonate on the basis of the control group. The changes of symptoms and signs such as abdominal pain, abdominal distension, nausea, vomiting and hematochezia were compared between the two groups before and after treatment. Serological changes of the gastric mucosal microenvironment, such as the serum levels of extracellular regulatory protein kinase (ERK), superoxide dismutase (SOD) and epidermal growth factor receptor (EGFR), were compared between the two groups. Moreover, the differences in the results of gastroscopy between the two groups before and after treatment were compared and analyzed. Results: The scores of gastrointestinal symptoms in the experimental group after treatment were significantly improved compared with the control group (p=0.00). The levels of ERK and EGFR in the experimental group were significantly lower than those in the control group (ERK, p=0.01; EGRF, p=0.00), while the level of SOD was significantly increased (p=0.02). After treatment, the total effective rate of ulcer healing in the experimental group was 82.5%, which was significantly better than 60% in the control group (p=0.03). After treatment, moderate to severe gastric mucosal inflammation in the experimental group decreased to 10%, significantly better than that in the control group (decreased to 30%) (p=0.03). Conclusion: Magnesium aluminum carbonate combined with rabeprazole-based triple therapy is preferred for the treatment of patients with Helicobacter pylori-positive gastric ulcer associated with hemorrhage. With such a highly effective treatment regimen, the internal environment and blood supply of gastric mucosal cells can be significantly improved, gastric mucosal inflammation and gastrointestinal symptoms can be ameliorated, and the healing of ulcer surfaces can be accelerated.
RESUMO
Characterizing microscale single particles directly is requested for dissecting the performance-limiting factors at the electrode scale. In this work, we build a single-particle electrochemical setup and develop a physics-based model for extracting the solid-phase diffusion coefficient (Ds ) and exchange current density (i0 ) from electrochemical impedance measurements. We find that the carbon coating on the LiNi1/3 Mn1/3 Co1/3 O2 surface enhances i0 . In addition, Ds and i0 decay irreversibly by ≈25 % and ≈10 %, respectively, when the cutoff charge voltage increases from 4.3â V to 4.4â V. Moreover, we correlate intrinsic parameters of single particles with the performance of porous electrodes. Porous electrodes assembled with active particles with higher i0 values deliver a greater capacity and faster capacity fade. The methods developed in this combined experimental and theoretical work can be useful in correlating the single-particle scale and porous-electrode scale for other similar systems.
RESUMO
Aluminum-sulfur (Al-S) batteries of ultrahigh energy-to-price ratios are a promising energy storage technology, while they suffer from a large voltage gap and short lifespan. Herein, we propose an electrocatalyst-boosting quasi-solid-state Al-S battery, which involves a sulfur-anchored cobalt/nitrogen co-doped graphene (S@CoNG) positive electrode and an ionic-liquid-impregnated metal-organic framework (IL@MOF) electrolyte. The Co-N4 sites in CoNG continuously catalyze the breaking of Al-Cl and S-S bonds and accelerate the sulfur conversion, endowing the Al-S battery with a shortened voltage gap of 0.43â V and a high discharge voltage plateau of 0.9â V. In the quasi-solid-state IL@MOF electrolytes, the shuttle effect of polysulfides has been inhibited, which stabilizes the reversible sulfur reaction, enabling the Al-S battery to deliver 820â mAh g-1 specific capacity and 78 % capacity retention after 300â cycles. This finding offers novel insights to design Al-S batteries for stable energy storage.
RESUMO
In this Letter, a metasurface combined with emerging 3D printing technology is proposed. The proposed metasurface regards the simple cube as the unit cell, and the height of the cube is the only variable. A nearly linear transmission phase range covering 360° operating at 20 GHz is obtained when the height is regulated in [2.26 mm, 11.20 mm]. Therefore, the proposed unit cell can be adopted to any metasurface with various functions. Taking the generation of a non-diffractive Bessel beam as an example, two metasurfaces composed of 30×30 units with different focusing directions are designed based on non-diffractive theory and the generalized law of refraction. Two prototypes are 3D printed and measured by a near-field scanning system. The measured results validate our design with satisfactory focusing and beam deflection performance. Additionally, the 3D printed metasurface has lower cost and a shorter processing cycle, and avoids metal loss. Therefore, a 3D printed metasurface is an excellent candidate that can be applied in millimeter wave or even higher frequency bands.
RESUMO
Hexagonal boron nitride nanosheets (BNNs) are analogous to their two-dimensional carbon counterparts in many materials properties, in particular, ultrahigh thermal conductivity, but also offer some unique attributes, including being electrically insulating, high thermal stability, chemical and oxidation resistance, low color, and high mechanical strength. Significant recent advances in the production of BNNs, understanding of their properties, and the development of polymeric nanocomposites with BNNs for thermally conductive yet electrically insulating materials and systems are highlighted herein. Major opportunities and challenges for further studies in this rapidly advancing field are also discussed.
Assuntos
Compostos de Boro/química , Nanoestruturas/química , Temperatura , Compostos de Boro/síntese química , Estabilidade de Medicamentos , Microscopia Eletrônica de Transmissão , Tamanho da PartículaRESUMO
Photovoltaic cells (PVs) are able to convert solar energy to electric energy, while energy storage devices are required to be equipped due to the fluctuations of sunlight. However, the electrical connection of PVs and energy storage devices leads to increased energy consumption, and thus energy storage ability and utilization efficiency are decreased. One of the solutions is to explore an integrated photoelectrochemical energy conversion-storage device. Up to date, the integrated photo-rechargeable Li-ion batteries often suffer from unstable photo-active materials and flammable electrolytes under illumination, with concerns in safety risks and limited lifetime. To address the critical issues, here a novel photo-rechargeable aluminum battery (PRAB) is designed with safe ionic liquid electrolytes and stable polyaniline photo-electrodes. The integrated PRAB presents stable operation with an enhanced reversible specific capacity ≈191% under illumination. Meanwhile, a simplified continuum model is established to provide rational guidance for designing electrode structures along with a charging/discharging strategy to meet the practical operation conditions. The as-designed PRAB presents an energy-saving efficiency ≈61.92% upon charging and an energy output increment ≈31.25% during discharging under illumination. The strategy of designing and fabricating stable and safe photo-rechargeable non-aqueous Al batteries highlights the pathway for substantially promoting the utilization efficiency of solar energy.
RESUMO
The liquid-phase mass transport is the key factor affecting battery stability. The influencing mechanism of liquid-phase mass transport in the separators is still not clear, the internal environment being a complex multi-field during the service life of lithium-ion batteries. The liquid-phase mass transport in the separators is related to the microstructure of the separator and the physicochemical properties of electrolytes. Here, in-situ local electrochemical impedance spectra were developed to investigate local inhomogeneities in the mass transfer process of lithium-ion batteries. The geometric microstructure of the separator significantly impacts the mass transfer process, with a reduction in porosity leading to increased overpotentials. A competitive relationship among porosity, tortuosity, and membrane thickness in the geometric parameters of the separator were established, resulting in a peak of polarization. The resistance of the liquid-phase mass transfer process is positively correlated with the viscosity of the electrolyte, hindering ion migration due to high viscosity. Polarization is closely related to the electrochemical performance, so a phase diagram of battery performance and inhomogeneous mass transfer was developed to guide the design of the battery. This study provides a foundation for the development of high stability lithium-ion batteries.
RESUMO
Rapid advancements in carbon-based fillers have enabled a new and more promising platform in the development of electromagnetic attenuation composites. Alignment of fillers in composites with specific structures and morphologies has been widely pursued to achieve high performance based on taking advantage of unique filler characteristics. In this work, few-layer graphene (FLG), obtained from direct exfoliation of graphite, was fabricated into paraffin wax to prepare FLG/wax composites and investigate their electromagnetic interference (EMI) shielding performance. The as-exfoliated FLG/wax samples have shown much improved EMI performance compared to the commercial graphite/wax ones. For further improvement of EMI shielding performance, split-press-merge approaches were applied to align the FLG fillers to achieve anisotropic characteristics in the plane perpendicular to the pressing direction. Much enhanced EMI shielding performance coupled with an improvement in absorption and reflection was observed in the post-alignment FLG/wax composites. An average interparticle distance model associated with improved electrically conducting interconnection and enlarged effective reflection regions with respect to enhanced reflection efficiency were discussed. The results suggest a platform and promising opportunities for preparing high-performance EMI shielding composites.
RESUMO
Achieving high energy density and long cycling life simultaneously remains the most critical challenge for aluminum-ion batteries (AIBs), especially for high-capacity conversion-type positive electrodes suffering from shuttle effect in strongly acidic electrolytes. Herein, we develop a layered quasi-solid AIBs system with double reaction zones (DRZs, Zone 1 and Zone 2) to address such issues. Zone 1 is designed to accelerate reaction kinetics by improving wetting ability of quasi-solid electrolyte to active materials. A composite three-dimensional conductive framework (Zone 2) interwoven by gel network for ion conduction and carbon nanotube network as electronic conductor, can fix the active materials dissolved from Zone 1 to allow for continuing electrochemical reactions. Therefore, a maximum electron transfer is realized for the conversion-type mateials in DRZs, and an ultrahigh capacity (400 mAh g-1) and an ultralong cycling life (4000 cycles) are achieved. Such strategy provides a new perspective for constructing high-energy-density and long-life AIBs.
RESUMO
The petroleum coke (PC) has been widely used as raw materials for the preparation of electrodes in aluminium electrolysis and lithium-ion batteries (LIB), during which massive CO2 gases are produced. To meet global CO2 reduction, an environmentally friendly route for utilizing PC is highly required. Here, a simple, scalable, catalyst-free process that can directly convert high-sulfur PC into graphitic nanomaterials under cathodic polarization in molten CaCl2 -LiCl at mild temperatures is proposed. The energy consumption of the proposed process is calculated to be 3 627.08 kWh t-1 , half that of the traditional graphitization process (≈7,825.21 kWh t-1 graphite). When applied as a negative electrode for LIBs, the as-converted graphite materials deliver a competitive specific capacity of ≈360 mAh g-1 (0.2 C) compared with commercial graphite. This approach has great potential to scale up for sustainably converting low-value PC into high-quality graphite for energy storage.
RESUMO
Typically, volume expansion of the electrodes after intercalation of active ions is highly undesirable yet inetvitable, and it can significantly reduce the adhesion force between the electrodes and current collectors. Especially in aluminum-ion batteries (AIBs), the intercalation of large-sized AlCl4 - can greatly weaken this adhesion force and result in the detachment of the electrodes from the current collectors, which seems an inherent and irreconcilable problem. Here, an interesting concept, the "dead zone", is presented to overcome the above challenge. By incorporating a large number of OH- and COOH- groups onto the surface of MXene film, a rich negative-charge region is formed on its surface. When used as the current collector for AIBs, it shields a tiny area of the positive electrode (adjacent to the current collector side) from AlCl4 - intercalation due to the repulsion force, and a tiny inert layer (dead zone) at the interface of the positive electrode is formed, preventing the electrode from falling off the current collector. This helps to effectively increase the battery's cycle life to as high as 50 000 times. It is believed that the proposed concept can be an important reference for future development of current collectors in rocking chair batteries.
RESUMO
Boron nitride nanosheets were dispersed in polymers to give composite films with excellent thermal transport performances approaching the record values found in polymer/graphene nanocomposites. Similarly high performance at lower BN loadings was achieved by aligning the nanosheets in poly(vinyl alcohol) matrix by simple mechanical stretching (see picture).
Assuntos
Compostos de Boro/química , Nanocompostos/química , Polímeros/química , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Modelos Moleculares , Conformação Molecular , Nanocompostos/ultraestruturaRESUMO
Rechargeable aluminum-ion batteries have attracted significant attention as candidates for next-generation energy storage devices owing to their high theoretical capacity, safe performance, and abundance of raw materials. Al metal is the best option as the negative electrode, while its issues such as dendrite growth and corrosion accompanying hydrogen evolution in ionic liquid electrolyte have been seriously overlooked. Understanding the electrochemical mechanism of the surface evolution behavior of Al metal is a vital pathway for solving these issues. Kinetic parameters and electrode structure are the two key parameters that affect the surface evolution behavior of Al negative electrodes. Herein, the qualitative relationship between the kinetic parameters and surface evolution behavior of the Al negative electrode was established through a combination of in-situ optical technology and multi-physical field numerical simulation method. The key kinetic parameters, including ion concentration and transfer coefficient, exhibited different laws of influence on the surface evolution behavior, such as dendrite growth and corrosion. The electrochemical mechanism on the surface evolution was explored to guide the optimization design of Al-ion batteries. Based on the coupling design of the electrode structure and kinetic parameters, a highly stable porous aluminum structure composed of Al powder with a particle size of 100â µm was constructed to obtain highly stable and high-performance aluminum-ion batteries. This method provides new sight into the design of high-performance aluminum-ion batteries.
RESUMO
The ionic conductivity of composite solid-state electrolytes (SSEs) can be tuned by introducing inorganic fillers, of which the mechanism remains elusive. Herein, ion conductivity of composite SSEs is characterized in an unprecedentedly wide frequency range of 10-2 -1010 Hz by combining chronoamperometry, electrochemical impedance spectrum, and dielectric spectrum. Using this method, it is unraveled that how the volume fraction v and surface fluorine content xF of TiO2 fillers tune the ionic conductivity of composite SSEs. It is identified that activation energy Ea is more important than carrier concentration c in this game. Specifically, c increases with v while Ea has the minimum value at v = 10% and increases at larger v. Moreover, Ea is further correlated with the dielectric constant of the SSE via the Marcus theory. A conductivity of 3.1×10-5 S cm-1 is obtained at 30 °C by tuning v and xF , which is 15 times higher than that of the original SSE. The present method can be used to understand ion conduction in various SSEs for solid-state batteries.