Crystal Structure and Conformational Dynamics of Pyrococcus furiosus Prolyl Oligopeptidase.

Enzymes in the prolyl oligopeptidase family possess unique structures and substrate specificities that are important for their biological activity and for potential biocatalytic applications. The crystal structures of Pyrococcus furiosus ( Pfu) prolyl oligopeptidase (POP) and the corresponding S477C mutant were determined to 1.9 and 2.2 Å resolution, respectively. The wild type enzyme crystallized in an open conformation, indicating that this state is readily accessible, and it contained bound chloride ions and a prolylproline ligand. These structures were used as starting points for molecular dynamics simulations of Pfu POP conformational dynamics. The simulations showed that large-scale domain opening and closing occurred spontaneously, providing facile substrate access to the active site. Movement of the loop containing the catalytically essential histidine into a conformation similar to those found in structures with fully formed catalytic triads also occurred. This movement was modulated by chloride binding, providing a rationale for experimentally observed activation of POP peptidase catalysis by chloride. Thus, the structures and simulations reported in this study, combined with existing biochemical data, provide a number of insights into POP catalysis.

Preparation, Characterization, and Oxygenase Activity of a Photocatalytic Artificial Enzyme.

A bicyclo[6,1,0]nonyne-substituted 9-mesityl-10-methyl-acridinium cofactor was prepared and covalently linked to a prolyl oligopeptidase scaffold containing a genetically encoded 4-azido-L-phenylalanine residue in its active site. The resulting artificial enzyme catalyzed sulfoxidation when irradiated with visible light in the presence of air. This reaction proceeds by initial electron abstraction from the sulfide within the enzyme active site, and the protein scaffold extended the fluorescence lifetime of the acridium cofactor. The mode of sulfide activation and placement of the acridinium cofactor (5) in POP-ZA4 -5 make this artificial enzyme a promising platform for developing selective photocatalytic transformations.

A general method for artificial metalloenzyme formation through strain-promoted azide-alkyne cycloaddition.

Strain-promoted azide-alkyne cycloaddition (SPAAC) can be used to generate artificial metalloenzymes (ArMs) from scaffold proteins containing a p-azido-L-phenylalanine (Az) residue and catalytically active bicyclononyne-substituted metal complexes. The high efficiency of this reaction allows rapid ArM formation when using Az residues within the scaffold protein in the presence of cysteine residues or various reactive components of cellular lysate. In general, cofactor-based ArM formation allows the use of any desired metal complex to build unique inorganic protein materials. SPAAC covalent linkage further decouples the native function of the scaffold from the installation process because it is not affected by native amino acid residues; as long as an Az residue can be incorporated, an ArM can be generated. We have demonstrated the scope of this method with respect to both the scaffold and cofactor components and established that the dirhodium ArMs generated can catalyze the decomposition of diazo compounds and both Si-H and olefin insertion reactions involving these carbene precursors.

Manganese terpyridine artificial metalloenzymes for benzylic oxygenation and olefin epoxidation.

New catalysts for non-directed hydrocarbon functionalization have great potential in organic synthesis. We hypothesized that incorporating a Mn-terpyridine cofactor into a protein scaffold would lead to artificial metalloenzymes (ArMs) in which the selectivity of the Mn cofactor could be controlled by the protein scaffold. We designed and synthesized a maleimide-substituted Mn-terpyridine cofactor and demonstrated that this cofactor could be incorporated into two different scaffold proteins to generate the desired ArMs. The structure and reactivity of one of these ArMs was explored, and the broad oxygenation capability of the Mn-terpyridine catalyst was maintained, providing a robust platform for optimization of ArMs for selective hydrocarbon functionalization.

Investigation of Changes in Tetracycline Repressor Binding upon Mutations in the Tetracycline Operator.

The tetracycline operon is an important gene network component, commonly used in synthetic biology applications because of its switch-like character. At the heart of this system is the highly specific interaction of the tet repressor protein (TetR) with its cognate DNA sequence (tetO). TetR binding on tetO practically stops expression of genes downstream of tetO by excluding RNA polymerase from binding the promoter and initiating transcription. Mutating the tetO sequence alters the strength of TetR-tetO binding and thus provides a tool to synthetic biologists to manipulate gene expression levels. We employ molecular dynamics (MD) simulations coupled with the free energy perturbation method to investigate the binding affinity of TetR to different tetO mutants. We also carry out in vivo tests in Escherichia coli for a series of promoters based on these mutants. We obtain reasonable agreement between experimental green fluorescent protein (GFP) repression levels and binding free energy differences computed from molecular simulations. In all cases, the wild-type tetO sequence yields the strongest TetR binding, which is observed both experimentally, in terms of GFP levels, and in simulation, in terms of free energy changes. Two of the four tetO mutants we tested yield relatively strong binding, whereas the other two mutants tend to be significantly weaker. The clustering and relative ranking of this subset of tetO mutants is generally consistent between our own experimental data, previous experiments with different systems and the free energy changes computed from our simulations. Overall, this work offers insights into an important synthetic biological system and demonstrates the potential, as well as limitations of molecular simulations to quantitatively explain biologically relevant behavior.

Optimized compatible set of BioBrick™ vectors for metabolic pathway engineering.

The BioBrick™ paradigm for the assembly of enzymatic pathways is being adopted and becoming a standard practice in microbial engineering. We present a strategy to adapt the BioBrick™ paradigm to allow the quick assembly of multi-gene pathways into a number of vectors as well as for the quick mobilization of any cloned gene into vectors with different features for gene expression and protein purification. A primary BioBrick™ (BB-eGFP) was developed where the promoter/RBS, multiple cloning sites, optional protein purification affinity tags and reporter gene were all separated into discrete regions by additional restriction enzymes. This primary BB-eGFP then served as the template for additional BioBrick™ vectors with different origins of replication, antibiotic resistances, inducible promoters (arabinose, IPTG or anhydrotetracycline), N- or C-terminal Histidine tags with thrombin cleavage, a LacZα reporter gene and an additional origin of mobility (oriT). All developed BioBricks™ and BioBrick™ compatible vectors were shown to be functional by measuring reporter gene expression. Lastly, a C(30) carotenoid pathway was assembled as a model enzymatic pathway to demonstrate in vivo functionality and compatibility of this engineered vector system.

Limited functional conservation of a global regulator among related bacterial genera: Lrp in Escherichia, Proteus and Vibrio.

BACKGROUND: Bacterial genome sequences are being determined rapidly, but few species are physiologically well characterized. Predicting regulation from genome sequences usually involves extrapolation from better-studied bacteria, using the hypothesis that a conserved regulator, conserved target gene, and predicted regulator-binding site in the target promoter imply conserved regulation between the two species. However many compared organisms are ecologically and physiologically diverse, and the limits of extrapolation have not been well tested. In E. coli K-12 the leucine-responsive regulatory protein (Lrp) affects expression of approximately 400 genes. Proteus mirabilis and Vibrio cholerae have highly-conserved lrp orthologs (98% and 92% identity to E. coli lrp). The functional equivalence of Lrp from these related species was assessed. RESULTS: Heterologous Lrp regulated gltB, livK and lrp transcriptional fusions in an E. coli background in the same general way as the native Lrp, though with significant differences in extent. Microarray analysis of these strains revealed that the heterologous Lrp proteins significantly influence only about half of the genes affected by native Lrp. In P. mirabilis, heterologous Lrp restored swarming, though with some pattern differences. P. mirabilis produced substantially more Lrp than E. coli or V. cholerae under some conditions. Lrp regulation of target gene orthologs differed among the three native hosts. Strikingly, while Lrp negatively regulates its own gene in E. coli, and was shown to do so even more strongly in P. mirabilis, Lrp appears to activate its own gene in V. cholerae. CONCLUSION: The overall similarity of regulatory effects of the Lrp orthologs supports the use of extrapolation between related strains for general purposes. However this study also revealed intrinsic differences even between orthologous regulators sharing >90% overall identity, and 100% identity for the DNA-binding helix-turn-helix motif, as well as differences in the amounts of those regulators. These results suggest that predicting regulation of specific target genes based on genome sequence comparisons alone should be done on a conservative basis.

Evolving artificial metalloenzymes via random mutagenesis.

Random mutagenesis has the potential to optimize the efficiency and selectivity of protein catalysts without requiring detailed knowledge of protein structure; however, introducing synthetic metal cofactors complicates the expression and screening of enzyme libraries, and activity arising from free cofactor must be eliminated. Here we report an efficient platform to create and screen libraries of artificial metalloenzymes (ArMs) via random mutagenesis, which we use to evolve highly selective dirhodium cyclopropanases. Error-prone PCR and combinatorial codon mutagenesis enabled multiplexed analysis of random mutations, including at sites distal to the putative ArM active site that are difficult to identify using targeted mutagenesis approaches. Variants that exhibited significantly improved selectivity for each of the cyclopropane product enantiomers were identified, and higher activity than previously reported ArM cyclopropanases obtained via targeted mutagenesis was also observed. This improved selectivity carried over to other dirhodium-catalysed transformations, including N-H, S-H and Si-H insertion, demonstrating that ArMs evolved for one reaction can serve as starting points to evolve catalysts for others.

Combined effect of protein fusion and signal sequence greatly enhances the production of recombinant human GM-CSF in Escherichia coli.

Granulocyte-macrophage colony-stimulating factor (GM-CSF) is a hematopoietic growth factor, that has been used as a therapeutic agent in facilitating bone marrow and stem cell transplantation and in other clinical cases like neutropenia. Although biologically active recombinant GM-CSF has been successfully produced in Escherichia coli, the reported levels are extremely poor. In this study we looked into the possible reasons for poor expression and found that protein toxicity coupled with protease-based degradation was the principal reason for low productivity. To overcome this problem we attached a signal sequence, as well as an amino-terminal His-tag fusion to the GM-CSF gene. This combination had a dramatic effect on expression levels, which increased from 0.8 microg/mL in the control to 40 microg/mL. When a larger fusion partner, such as the Maltose-binding protein (MBP-tag), was used the expression levels increased further to 69.5 microg/mL, which along with the MBP-tag represented approx 12% of the total cellular protein.

Engineering a dirhodium artificial metalloenzyme for selective olefin cyclopropanation.

Artificial metalloenzymes (ArMs) formed by incorporating synthetic metal catalysts into protein scaffolds have the potential to impart to chemical reactions selectivity that would be difficult to achieve using metal catalysts alone. In this work, we covalently link an alkyne-substituted dirhodium catalyst to a prolyl oligopeptidase containing a genetically encoded L-4-azidophenylalanine residue to create an ArM that catalyses olefin cyclopropanation. Scaffold mutagenesis is then used to improve the enantioselectivity of this reaction, and cyclopropanation of a range of styrenes and donor-acceptor carbene precursors were accepted. The ArM reduces the formation of byproducts, including those resulting from the reaction of dirhodium-carbene intermediates with water. This shows that an ArM can improve the substrate specificity of a catalyst and, for the first time, the water tolerance of a metal-catalysed reaction. Given the diversity of reactions catalysed by dirhodium complexes, we anticipate that dirhodium ArMs will provide many unique opportunities for selective catalysis.

Reconstruction of Escherichia coli transcriptional regulatory networks via regulon-based associations.

BACKGROUND: Network reconstruction methods that rely on covariance of expression of transcription regulators and their targets ignore the fact that transcription of regulators and their targets can be controlled differently and/or independently. Such oversight would result in many erroneous predictions. However, accurate prediction of gene regulatory interactions can be made possible through modeling and estimation of transcriptional activity of groups of co-regulated genes. RESULTS: Incomplete regulatory connectivity and expression data are used here to construct a consensus network of transcriptional regulation in Escherichia coli (E. coli). The network is updated via a covariance model describing the activity of gene sets controlled by common regulators. The proposed model-selection algorithm was used to annotate the likeliest regulatory interactions in E. coli on the basis of two independent sets of expression data, each containing many microarray experiments under a variety of conditions. The key regulatory predictions have been verified by an experiment and literature survey. In addition, the estimated activity profiles of transcription factors were used to describe their responses to environmental and genetic perturbations as well as drug treatments. CONCLUSION: Information about transcriptional activity of documented co-regulated genes (a core regulon) should be sufficient for discovering new target genes, whose transcriptional activities significantly co-vary with the activity of the core regulon members. Our ability to derive a highly significant consensus network by applying the regulon-based approach to two very different data sets demonstrated the efficiency of this strategy. We believe that this approach can be used to reconstruct gene regulatory networks of other organisms for which partial sets of known interactions are available.

Overexpression and purification of recombinant human interferon alpha2b in Escherichia coli.

Overexpression of rhIFN-alpha2b was obtained by synthesizing a codon optimized gene for IFN-alpha2b and expressing it in the form of inclusion bodies (IBs) in Escherichia coli. The recombinant plasmid pRSET-IFNalpha, which had the IFN-alpha2b gene under the T7 promoter, was coexpressed with plasmid pGP1-2, which carried the gene for T7 RNA polymerase under the heat inducible lambdaP(L) promoter. This two plasmid expression system was optimized with respect to heat shock time, media, and time of induction in shake flask cultures. This was then scaled up into a bioreactor to get a maximum volumetric product yield of 5.2g/L at a final OD(600) of 67. At this point, the IBs represented approximately 40% of the total cellular protein. This high specific product yields eased the further downstream processing steps and improved product recoveries. The IBs were isolated and purified through ion exchange followed by step refolding to give a final product yield of approximately 3g/L, which is maximum reported in the literature. The bioassay of the refolded protein gave a specific activity of approximately 3 x 10(9)IU/mg protein.