SmartFFR, a New Functional Index of Coronary Stenosis: Comparison With Invasive FFR Data.

Aims: In this study, we evaluate the efficacy of SmartFFR, a new functional index of coronary stenosis severity compared with gold standard invasive measurement of fractional flow reserve (FFR). We also assess the influence of the type of simulation employed on smartFFR (i.e. Fluid Structure Interaction vs. rigid wall assumption). Methods and Results: In a dataset of 167 patients undergoing either computed tomography coronary angiography (CTCA) and invasive coronary angiography or only invasive coronary angiography (ICA), as well as invasive FFR measurement, SmartFFR was computed after the 3D reconstruction of the vessels of interest and the subsequent blood flow simulations. 202 vessels were analyzed with a mean total computational time of seven minutes. SmartFFR was used to process all models reconstructed by either method. The mean FFR value of the examined dataset was 0.846 ± 0.089 with 95% CI for the mean of 0.833-0.858, whereas the mean SmartFFR value was 0.853 ± 0.095 with 95% CI for the mean of 0.84-0.866. SmartFFR was significantly correlated with invasive FFR values (RCCTA = 0.86, p CCTA < 0.0001, RICA = 0.84, p ICA < 0.0001, R overall = 0.833, p overall < 0.0001), showing good agreement as depicted by the Bland-Altman method of analysis. The optimal SmartFFR threshold to diagnose ischemia was ≤0.83 for the overall dataset, ≤0.83 for the CTCA-derived dataset and ≤0.81 for the ICA-derived dataset, as defined by a ROC analysis (AUCoverall = 0.956, p < 0.001, AUCICA = 0.975, p < 0.001, AUCCCTA = 0.952, p < 0.001). Conclusion: SmartFFR is a fast and accurate on-site index of hemodynamic significance of coronary stenosis both at single coronary segment and at two or more branches level simultaneously, which can be applied to all CTCA or ICA sequences of acceptable quality.

Art care: A multi-modality coronary 3D reconstruction and hemodynamic status assessment software.

BACKGROUND: Due to the incremental increase of clinical interest in the development of software that allows the 3-dimensional (3D) reconstruction and the functional assessment of the coronary vasculature, several software packages have been developed and are available today. OBJECTIVE: Taking this into consideration, we have developed an innovative suite of software modules that perform 3D reconstruction of coronary arterial segments using different coronary imaging modalities such as IntraVascular UltraSound (IVUS) and invasive coronary angiography images (ICA), Optical Coherence Tomography (OCT) and ICA images, or plain ICA images and can safely and accurately assess the hemodynamic status of the artery of interest. METHODS: The user can perform automated or manual segmentation of the IVUS or OCT images, visualize in 3D the reconstructed vessel and export it to formats, which are compatible with other Computer Aided Design (CAD) software systems. We employ finite elements to provide the capability to assess the hemodynamic functionality of the reconstructed vessels by calculating the virtual functional assessment index (vFAI), an index that corresponds and has been shown to correlate well to the actual fractional flow reserve (FFR) value. RESULTS: All the modules of the proposed system have been thoroughly validated. In brief, the 3D-QCA module, compared to a successful commercial software of the same genre, presented very good correlation using several validation metrics, with a Pearson's correlation coefficient (R) for the calculated volumes, vFAI, length and minimum lumen diameter of 0.99, 0.99, 0.99 and 0.88, respectively. Moreover, the automatic lumen detection modules for IVUS and OCT presented very high accuracy compared to the annotations by medical experts with the Pearson's correlation coefficient reaching the values of 0.94 and 0.99, respectively. CONCLUSIONS: In this study, we have presented a user-friendly software for the 3D reconstruction of coronary arterial segments and the accurate hemodynamic assessment of the severity of existing stenosis.

Validation study of a 3D-QCA coronary reconstruction method using a hybrid intravascular ultrasound and angiography reconstruction method and patient-specific Fractional Flow Reserve data.

The estimation of the severity of coronary lesions is of utmost importance in today's clinical practice, since Cardiovascular diseases often have fatal consequences. The most efficient method to estimate the severity of a lesion is the calculation of the Fractional Flow Reserve. The necessary use of a pressure wire, however, makes this method invasive and strenuous for the patient. In this work, we present a novel 3-Dimensional Quantitative Coronary Analysis coronary reconstruction method and a framework for the computation of the virtual Functional Assessment Index (vFAI). In a dataset of 5 coronary arterial segments, we use the aforementioned method to reconstruct them in 3D, and compare them to the respective 3D models reconstructed from our already validated hybrid IVUS-angiography reconstruction method [2]. The obtained results indicate a high correlation between the two methods in terms of the calculated FFR values, presenting a difference of 3.19% in the worst case scenario. Furthermore, when compared to the actual FFR values that derive from a pressure wire, the differences were statistically insignificant.

Modeling of blood flow through sutured micro-vascular anastomoses.

Microanastomosis is a surgical procedure used to reconnect two blood vessels using sutures. The optimal microanastomosis may be predicted by assessing the factors that influence this invasive procedure. Blood flow and hemodynamics following microanastomosis are important factors for the successful longevity of this operation. How is the blood flow affected by the presence of sutures? Computational Fluid Dynamics (CFD) is a powerful tool that permits the estimation of specific quantities, such as fluid stresses, that are hardly measurable in vivo. In this study, we propose a methodology which evaluates the alterations in the hemodynamic status due to microanastomosis. A CFD model of a reconstructed artery has been developed, based on anatomical information provided by intravascular ultrasound and angiography, and was used to simulate blood flow after microanastomosis. The 3D reconstructed arterial segments are modeled as non-compliant 1.24 - 1.47 mm diameter ducts, with approximately 0.1 mm arterial thickness. The blood flow is considered laminar and the no-slip condition is imposed on the boundary wall, which is assumed to be rigid. In analyzing the results, the distribution of the wall shear stress (WSS) is presented in the region of interest, near the sutures. The results indicate that high values of WSS appear in the vicinity of sutures. Such regions may promote thrombus formation and subsequently anastomotic failure, therefore their meticulous study is of high importance.

Patient-specific simulation of coronary artery pressure measurements: an in vivo three-dimensional validation study in humans.

Pressure measurements using finite element computations without the need of a wire could be valuable in clinical practice. Our aim was to compare the computed distal coronary pressure values with the measured values using a pressure wire, while testing the effect of different boundary conditions for the simulation. Eight coronary arteries (lumen and outer vessel wall) from six patients were reconstructed in three-dimensional (3D) space using intravascular ultrasound and biplane angiographic images. Pressure values at the distal and proximal end of the vessel and flow velocity values at the distal end were acquired with the use of a combo pressure-flow wire. The 3D lumen and wall models were discretized into finite elements; fluid structure interaction (FSI) and rigid wall simulations were performed for one cardiac cycle both with pulsatile and steady flow in separate simulations. The results showed a high correlation between the measured and the computed coronary pressure values (coefficient of determination [r(2)] ranging between 0.8902 and 0.9961), while the less demanding simulations using steady flow and rigid walls resulted in very small relative error. Our study demonstrates that computational assessment of coronary pressure is feasible and seems to be accurate compared to the wire-based measurements.

Finite element analysis of stent implantation in a three-dimensional reconstructed arterial segment.

Endovascular stent deployment is a mechanical procedure used to rehabilitate a diseased arterial segment by restoring blood flow in occluded regions. The success or failure of the stent implantation depends on the stent device and the deployment technique. The optimal stent deployment can be predicted by investigating the factors that influence this minimally invasive procedure. In this study, we propose a methodology which evaluates the alterations in the arterial environment caused by stent deployment. A finite element model of a reconstructed right coronary artery with a stenosis was created based on anatomical information provided by intravascular ultrasound and angiography. The model was used to consider placement and performance after intervention with a commercially available Leader Plus stent. The performance of the stent, within this patient-specific arterial segment is presented, as well as the induced arterial deformation and straightening. The arterial stress distribution is analyzed with respect to possible regions of arterial injury. Our approach can be used to optimize stent deployment and to provide cardiologists with a valuable tool to visually select the position and deploy stents in patient-specific reconstructed arterial segments, thereby enabling new methods for optimal cardiovascular stent positioning.

Assessing the hemodynamic influence between multiple lesions in a realistic right coronary artery segment: A computational study.

Coronary artery disease is the primary cause of morbidity and mortality worldwide. Therefore, detailed assessment of lesions in the coronary vasculature is critical in current clinical practice. Fractional flow reserve (FFR) has been proven as an efficient method for assessing the hemodynamic severity of a coronary stenosis. However, functional assessment of a coronary segment with multiple stenoses (≥ 2) remains complex for guiding the strategy of percutaneous coronary intervention due to the hemodynamic interplay between adjacent stenoses. In this work, we created four 3-dimensional (3D) arterial models that derive from a healthy patient-specific right coronary artery segment. The initial healthy model was reconstructed using fusion of intravascular ultrasound (IVUS) and biplane angiographic patient data. The healthy 3D model presented a measured FFR value of 0.96 (pressure-wire) and a simulated FFR value of 0.98. We then created diseased models with two artificial sequential stenoses of 90% lumen area reduction or with the proximal and distal stenosis separately. We calculated the FFR value for each case: 0.65 for the case with the two stenoses, 0.73 for the case with the distal stenosis and 0.90 for the case with the proximal stenosis. This leads to the conclusion that although both stenoses had the same degree of lumen area stenosis, there was a large difference in hemodynamic severity, thereby indicating that angiographic lumen assessment by itself is often not adequate for accurate assessment of coronary lesions.

Computational assessment of the fractional flow reserve from intravascular ultrasound and coronary angiography data: a pilot study.

Cardiovascular disease is one of the primary causes of morbidity and mortality around the globe. Thus, the diagnosis of critical lesions in coronary arteries is of utmost importance in clinical practice. One useful and efficient method to assess the functional severity of one or multiple lesions in a coronary artery is the calculation of the fractional flow reserve (FFR). In the current work, we present a method which allows the calculation of the FFR value computationally, without the use of a pressure wire and the induction of hyperemia, using intravascular ultrasound (IVUS) and biplane angiography images for three-dimensional (3D) coronary artery reconstruction and measurements of the volumetric flow rate derived from angiographic sequences. The simulated FFR values were compared to the invasively measured FFR values in 7 cases, presenting high correlation (r=0.85) and good agreement (mean difference=0.002). FFR assessment without employing a pressure wire and the induction of hyperemia is feasible using 3D reconstructed coronary artery models from angiographic and IVUS data coupled with computational fluid dynamics.