Core/Shell-Like Localized Emission at Atomically Thin Semiconductor-Au Interface.

Localized emission in atomically thin semiconductors has sparked significant interest as single-photon sources. Despite comprehensive studies into the correlation between localized strain and exciton emission, the impacts of charge transfer on nanobubble emission remains elusive. Here, we report the observation of core/shell-like localized emission from monolayer WSe2 nanobubbles at room temperature through near-field studies. By altering the electronic junction between monolayer WSe2 and the Au substrate, one can effectively adjust the semiconductor to metal junction from a Schottky to an Ohmic junction. Through concurrent analysis of topography, potential, tip-enhanced photoluminescence, and a piezo response force microscope, we attribute the core/shell-like emissions to strong piezoelectric potential aided by induced polarity at the WSe2-Au Schottky interface which results in spatial confinement of the excitons. Our findings present a new approach for manipulating charge confinement and engineering localized emission within atomically thin semiconductor nanobubbles. These insights hold implications for advancing the nano and quantum photonics with low-dimensional semiconductors.

Enhancing Single Photon Emission Purity via Design of van der Waals Heterostructures.

Quantum emitters are essential components of quantum photonic circuitry envisioned beyond the current optoelectronic state-of-the-art. Two dimensional materials are attractive hosts for such emitters. However, the high single photon purity required is rarely realized due to the presence of spectrally degenerate classical light originating from defects. Here, we show that design of a van der Waals heterostructure effectively eliminates this spurious light, resulting in purities suitable for a variety of quantum technological applications. Single photon purity from emitters in monolayer WSe2 increases from 60% to 92% by incorporating this monolayer in a simple graphite/WSe2 heterostructure. Fast interlayer charge transfer quenches a broad photoluminescence background by preventing radiative recombination through long-lived defect bound exciton states. This approach is generally applicable to other 2D emitter materials, circumvents issues of material quality, and offers a path forward to achieve the ultrahigh single photon purities ultimately required for photon-based quantum technologies.

The effect of synthetic grass sports surfaces on the thermal environment: A systematic review.

There are concerns regarding high surface temperatures on synthetic grass sports surfaces influencing the surrounding thermal environment, potentially increasing heat stress and impacting athlete safety. As such, studies have investigated changes to the thermal environment surrounding synthetic grass surfaces in comparison to both natural grass, and synthetic surfaces with different features, but this body of research has not been systematically reviewed. Therefore, this systematic review aimed to (i) determine if there are differences in the thermal environment surrounding synthetic grass surfaces compared with natural grass surfaces, and (ii) determine if there are differences in the thermal environment between different types of synthetic grass surfaces. A systematic review adhering to the PRISMA guidelines was performed. The eligibility criteria required investigations to report at least one of the following environmental parameters on or directly above both a synthetic surface and a comparator group of either natural grass or an alternative synthetic grass surface used in sport: Air temperature, mean radiant temperature, humidity, wind velocity, unified heat stress indices (i.e. wet-bulb-globe temperature and heat index) and/or surface temperature. Twenty-three studies were identified. The only parameters that were consistently higher on synthetic grass compared to natural grass were the air temperature (range: 0.5-1.2 °C) and surface temperature (range: 9.4-33.7 °C), while the mean radiant temperature, humidity, wind velocity and wet-bulb-globe temperature remained similar or required more data to determine if any differences exist. Synthetic grass surfaces consisting of styrene butadiene rubber infill or a shock pad had increased surface temperatures, whereas surfaces with thermoplastic elastomer infill, Cool climate turf fibres or HydroChill had lower surface temperatures. This systematic review has demonstrated that air and surface temperatures can be increased on synthetic sports surfaces, compared to natural grass surfaces. However, it is uncertain whether the differences are enough to increase an individual's heat stress risk and cause concern for athlete safety. While modifications to the turf infill or fibres can reduce synthetic surface temperatures, the effect of these features on the thermal environment as a whole is unclear. This review was prospectively registered with the Open Science Framework (Open Science Framework registration   https://doi.org/10.17605/OSF.IO/BTKGE ).

Vitamin D/Bone Mineral Density and Triglyceride Paradoxes Seen in African Americans: A Cross-Sectional Study and Review of the Literature.

Vitamin D is known to have a positive effect on bone health. Despite the greater frequency of vitamin D deficiency in African Americans (AA), they have a higher bone mineral density (BMD) compared to whites, demonstrating a disconnect between BMD and vitamin D levels in AA. Another intriguing relationship seen in AA is the triglyceride (TG) paradox, an unusual phenomenon in which a normal TG status is observed even when patients house conditions known to be characterized by high TG levels, such as Type II diabetes. To the best of our knowledge, no study has examined whether these two paradoxical relationships exist simultaneously in AA subjects with Type II diabetes. In this study, we compared levels of blood markers, including HbA1c, TG, and vitamin D, measured as serum 25-hydroxyvitamin D [25(OH)VD] µM/mL, [25(OH)VD]/TG, calcium, and BMD in AA (n = 56) and white (n = 26) subjects with Type II diabetes to see whether these relationships exist concurrently. We found that AA subjects had significantly lower TG and [25(OH)VD] levels and a significantly higher BMD status compared to white subjects, even when the ages, BMI, duration of diabetes, HbA1c, and calcium levels were similar between the two groups. This demonstrates that these two paradoxical relationships exist simultaneously in Type II diabetic AA subjects. In addition to these findings, we discuss the current hypotheses in the literature that attempt to explain why these two intriguing relationships exist. This review also discusses four novel hypotheses, such as altered circulating levels and the potential role of estrogen and hydrogen sulfide on BMD and HMG-CoA reductase as a possible contributor to the TG paradox in AA subjects. This manuscript demonstrates that there are still many unanswered questions regarding these two paradoxical relationships and further research is needed to determine why they exist and how they can be implemented to improve healthcare.

The effect of wheelchair cushion properties on the microclimate at the cushion-user interface: A systematic review and meta-analysis.

INTRODUCTION: Pressure injuries are a preventable yet highly prevalent health concern. Wheelchair cushion prescription can have significant implications for wheelchair users' risk of pressure injury development, which can impact functional abilities and quality of life. The efficacy of a wheelchair cushion to redistribute pressure has been well-researched, but the efficacy to manage the microclimate is less clear, particularly in warm-hot environments. The aim of this study was to systematically review studies examining the effect of wheelchair cushions on temperature, moisture and thermal perception to determine which cushions are superior to improve these responses. METHOD: A systematic review with meta-analyses of randomised cross-over and randomised control trials of wheelchair cushion interventions on measures of temperature, moisture, and thermal perception was conducted. RESULTS: Eight studies were identified that met the eligibility criteria and six meta-analyses were conducted. Pooled analyses identified a significantly lower temperature on foam-gel cushions compared to air cushions (MD = 0.80, 95% CI: 0.31, 1.29; p = 0.002) and a significantly lower temperature on foam-gel cushions compared to foam cushions (SMD = 0.76, 95%CI; 0.45, 1.06; p < 0.00001). Pooled analyses also demonstrated significantly lower relative humidity (i.e., moisture) on foam cushions compared to foam-gel cushions (p = 0.02). Differences in thermal perception were inconclusive due to limited data found. CONCLUSION: It is clear that not one cushion is ideal in managing all aspects of microclimate, as foam-gel cushions were the superior cushion to manage temperature and foam cushions were the superior cushion to manage moisture. This article provides occupational therapists and other health professionals with evidence-based information to assist with wheelchair cushion prescription that minimises the temperature and moisture accumulation, and associated risk of pressure injury for wheelchair users.

Design of a Remote, Multi-Range Conductivity Sensor.

So far, research on remote conductivity detection has primarily focused on large conductivities. This paper examines the entire conductivity range, proposing a method that can be adapted to the desired application. The optimization procedure for the different regions is presented and discussed. Specific interest is given to the low-conductivity range, below 10 S/m, which covers human body tissues. This could lead to applications in body imaging, especially for induction tomography. Conductivities below 12.5 S/m are extracted experimentally with an error below 10%.

Bright and Dark Exciton Coherent Coupling and Hybridization Enabled by External Magnetic Fields.

Magnetic field- and polarization-dependent measurements on bright and dark excitons in monolayer WSe2 combined with time-dependent density functional theory calculations reveal intriguing phenomena. Magnetic fields up to 25 T parallel to the WSe2 plane lead to a partial brightening of the energetically lower lying exciton, leading to an increase of the dephasing time. Using a broadband femtosecond pulse excitation, the bright and partially allowed excitonic state can be excited simultaneously, resulting in coherent quantum beating between these states. The magnetic fields perpendicular to the WSe2 plane energetically shift the bright and dark excitons relative to each other, resulting in the hybridization of the states at the K and K' valleys. Our experimental results are well captured by time-dependent density functional theory calculations. These observations show that magnetic fields can be used to control the coherent dephasing and coupling of the optical excitations in atomically thin semiconductors.

Core body temperature responses during competitive sporting events: A narrative review.

Due to the lack of research in real-world sports competitions, the International Olympic Committee, in 2012, called for data characterising athletes' sport and event-specific thermal profiles. Studies clearly demonstrate that elite athletes often attain a core body temperature (Tc) ≥ 40°C without heat-related medical issues during competition. However, practitioners, researchers and ethical review boards continue to cite a Tc ≥ 40°C (and lower) as a threshold where athlete health is impacted (an assumption from laboratory studies). Therefore, this narrative review aims to: (i) summarise and review published data on Tc responses during competitive sport and identify key considerations for practitioners; (ii) establish the incidence of athletes experiencing a Tc ≥ 40°C in competitive sport alongside the incidence of heat illness/heat stroke (EHI/EHS) symptoms; and (iii) discuss the evolution of Tc measurement during competition. The Tc response is primarily based on the physical demands of the sport, environmental conditions, competitive level, and athlete disability. In the reviewed research, 11.9% of athletes presented a Tc ≥ 40°C, with only 2.8% of these experiencing EHI/EHS symptoms, whilst a high Tc ≥ 40°C (n = 172; Tc range 40-41.5°C) occurred across a range of sports and environmental conditions (including some temperate environments). Endurance athletes experienced a Tc ≥ 40°C more than intermittent athletes, but EHI/EHS was similar. This review demonstrates that a Tc ≥ 40°C is not a consistently meaningful risk factor of EHI/EHS symptomology in this sample; therefore, Tc monitoring alongside secondary measures (i.e. general cognitive disturbance and gait disruption) should be incorporated to reduce heat-related injuries during competition.

Profiling cognitive workload in an unmanned vehicle control task with cognitive models and physiological metrics.

In the present study, we use Cognitive Metrics Profiling (CMP) to capture variance in cognitive load within a complex unmanned vehicle control task. We aim to demonstrate convergent validity with existing workload measurement methods, and to decompose workload into constituent cognitive resources to aid in diagnosing causes of workload. A cognitive model of the task was developed and examined to determine the extent to which it could predict behavioral performance, subjective workload, and validated physiological workload metrics. We also examined model activity to draw insights regarding loaded cognitive capacities. We found that composite workload from the model predicted physiological metrics, performance, and subjective workload. Moreover, the model indicates that differences in workload were driven largely by procedural, declarative, and temporal memory demands. We have found preliminary evidence of correspondence between workload predictions of a CMP model and physiological measures of workload. This suggests our approach captures interesting aspects of workload in a complex task environment and may provide a theoretical link between behavioral, physiological, and subjective metrics. This approach may provide a means to design effective workload mitigation interventions and improve decision-making about personnel tasking and automation.

3D Printing of Functional Metal and Dielectric Composite Meta-Atoms.

In this report, a novel fabrication method, based on casting Field's metal inside dielectric molds made via fused deposition modeling, is presented. Fused deposition modeling (FDM) has become one of the most common rapid prototyping methods. Whilst it generally produces good quality mechanical structures in thermoplastics, few reliable methods have been demonstrated that produce good quality 3D electrically conductive structures. By using Field's metal to transform dielectric molds into conductive structures, nearly any continuous metal geometry buried within the polymer can be created, allowing for the realization of complex 3D architectures. A wide range of thermoplastic materials used in fused deposition modeling have been investigated, to identify the best candidates in terms of processing temperature, relative permittivity, and loss tangent. Experimental measurements and X-ray computer tomography scans are used to determine the quality of structures fabricated using this method. Based on these findings, functional metamaterials devices operating at 600-700 MHz with high Q-factors have been produced. This method shows potential to be incorporated into standard FDM setups and could be utilized for the fabrication of curved and 3D geometries.

Self-Hybridized Polaritonic Emission from Layered Perovskites.

Light-matter coupling in excitonic materials has been the subject of intense recent investigations due to emergence of new materials. Two-dimensional layered hybrid organic/inorganic perovskites (2D HOIPs) support strongly bound excitons at room temperature with some of the highest oscillator strengths and electric loss tangents among the known excitonic materials. Here, we report strong light-matter coupling in Ruddlesden-Popper phase 2D HOIP crystals without the necessity of an external cavity. We report the concurrent occurrence of multiple orders of hybrid light-matter states via both reflectance and luminescence spectroscopy in thick (>100 nm) crystals and near-unity absorption in thin (<20 nm) crystals. We observe resonances with quality factors of >250 in hybridized exciton-polaritons and identify a linear correlation between exciton-polariton mode splitting and extinction coefficient of the various 2D HOIPs. Our work opens the door to studying polariton dynamics in self-hybridized and open cavity systems with broad applications in optoelectronics and photochemistry.

Exercise craving potentiates excitatory inputs to ventral tegmental area dopaminergic neurons.

Physical exercise, which can be addictogenic on its own, is considered a therapeutic alternative for drug craving. Exercise might thus share with drugs the ability to strengthen excitatory synapses onto ventral tegmental area (VTA) dopaminergic neurones, as assessed by the ratio of AMPA receptor (AMPAR)-mediated excitatory postsynaptic currents (EPSCs) to NMDA receptor (NMDAR)-mediated EPSCs. As did acute cocaine, amphetamine, or Δ9 -tetrahydrocannabinol (THC) pretreatments, an acute 1-h wheel-running session increased the AMPAR/NMDAR ratio in VTA dopaminergic neurones. To dissect the respective influences of wheel-running seeking and performance, mice went through an operant protocol wherein wheel-running was conditioned by nose poking under fixed ratio schedules of reinforcement. Conditioned wheel-running increased the AMPAR/NMDAR ratio to a higher extent than free wheel-running, doing so although running performance was lower in the former paradigm than in the latter. Thus, the cue-reward association, rather than reward consumption, played a major role in this increase. The AMPAR/NMDAR ratio returned to baseline levels in mice that had extinguished the cued-running motivated task, but it increased after a cue-induced reinstatement session. The amplitude of this increase correlated with the intensity of exercise craving, as assessed by individual nose poke scores. Finally, cue-induced reinstatement of running seeking proved insensitive to acute cocaine or THC pretreatments. Our study reveals for the first time that the drive for exercise bears synaptic influences on VTA dopaminergic neurones which are reminiscent of drug actions. Whether these influences play a role in the therapeutic effects of exercise in human drug craving remains to be established.

Development of a "Cooling" Menthol Energy Gel for Endurance Athletes: Effect of Menthol Concentration on Acceptability and Preferences.

Menthol is effective at stimulating thermosensitive neurons that evoke pleasant cooling sensations. Internal application of menthol can be ergogenic for athletes, and hence, addition of menthol to sports nutrition products may be beneficial for athletes. The aim of this study was to develop a menthol energy gel for consumption during exercise and to determine acceptability and preferences for gels with different menthol concentrations. With a randomized, crossover, and double-blind placebo-controlled design, 40 endurance athletes (20 females) ingested an energy gel with a menthol additive at a high (0.5%; HIGH) or low concentration (0.1%; LOW), or a mint-flavored placebo (CON), on separate occasions during outdoor endurance training sessions. The athletes rated the gels for cooling sensation, mint flavor intensity, sweetness, and overall experience and provided feedback. Results are reported as median (interquartile range). Both menthol gels successfully delivered a cooling sensation, with a significantly greater response for HIGH (5.0 [4.0-5.0]) compared with LOW (3.5 [3.0-4.0]; p = .022) and CON (1.0 [1.0-2.0]; p < .0005), and LOW compared with CON (p < .0005). Ratings of mint flavor intensity followed the same trend as cooling sensation, while ratings of overall experience were significantly worse for HIGH (2.0 [1.0-3.0]) compared with LOW (4.0 [2.0-4.0]; p = .001) and CON (4.0 [3.0-4.0]; p < .0005). An energy gel with the addition of menthol at 0.1-0.5% provides a cooling sensation for athletes with a dose-response when ingested during exercise. The 0.1% concentration is recommended to maximize the overall experience of the gel.

Human cytomegalovirus-specific T-cell receptor engineered for high affinity and soluble expression using mammalian cell display.

T-cell receptors (TCR) have considerable potential as therapeutics and antibody-like reagents to monitor disease progression and vaccine efficacy. Whereas antibodies recognize only secreted and surface-bound proteins, TCRs recognize otherwise inaccessible disease-associated intracellular proteins when they are presented as processed peptides bound to major histocompatibility complexes (pMHC). TCRs have been primarily explored for cancer therapy applications but could also target infectious diseases such as cytomegalovirus (CMV). However, TCRs are more difficult to express and engineer than antibodies, and advanced methods are needed to enable their widespread use. Here, we engineered the human CMV-specific TCR RA14 for high-affinity and robust soluble expression. To achieve this, we adapted our previously reported mammalian display system to present TCR extracellular domains and used this to screen CDR3 libraries for clones with increased pMHC affinity. After three rounds of selection, characterized clones retained peptide specificity and activation when expressed on the surface of human Jurkat T cells. We obtained high yields of soluble, monomeric protein by fusing the TCR extracellular domains to antibody hinge and Fc constant regions, adding a stabilizing disulfide bond between the constant domains and disrupting predicted glycosylation sites. One variant exhibited 50 nm affinity for its cognate pMHC, as measured by surface plasmon resonance, and specifically stained cells presenting this pMHC. Our work has identified a human TCR with high affinity for the immunodominant CMV peptide and offers a new strategy to rapidly engineer soluble TCRs for biomedical applications.

Chemical Synthesis and Biological Application of Modified Oligonucleotides.

RNA plays a myriad of roles in the body including the coding, decoding, regulation, and expression of genes. RNA oligonucleotides have garnered significant interest as therapeutics via antisense oligonucleotides or small interfering RNA strategies for the treatment of diseases ranging from hyperlipidemia, HCV, and others. Additionally, the recently developed CRISPR-Cas9 mediated gene editing strategy also relies on Cas9-associated RNA strands. However, RNA presents numerous challenges as both a synthetic target and a potential therapeutic. RNA is inherently unstable, difficult to deliver into cells, and potentially immunogenic by itself or upon modification. Despite these challenges, with the help of chemically modified oligonucleotides, multiple RNA-based drugs have been approved by the FDA. The progress is made possible due to the nature of chemically modified oligonucleotides bearing advantages of nuclease stability, stronger binding affinity, and some other unique properties. This review will focus on the chemical synthesis of RNA and its modified versions. How chemical modifications of the ribose units and of the phosphatediester backbone address the inherent issues with using native RNA for biological applications will be discussed along the way.

Mild Cu(OTf)2-Mediated C-Glycosylation with Chelation-Assisted Picolinate as a Leaving Group.

C-Glycosylation reactions of glycosyl picolinates with allyltrimethylsilane or silyl enol ethers were developed. Picolinate as a chelation-assisted leaving group could be activated by Cu(OTf)2 and avoided the use of harsh Lewis acids. The glycosylations were operated under mild neutral conditions and gave the corresponding C-glycosides in up to 95% yield with moderate to excellent stereoselectivities.

Cycling Power Profile Characteristics of National-Level Junior Triathletes.

Stevens, CJ, Bennett, KJM, Novak, AR, Kittel, AB, and Dascombe, BJ. Cycling power profile characteristics of national-level junior triathletes. J Strength Cond Res 33(1): 197-202, 2019-With the draft-legal rule recently introduced to junior triathlon competition, it has become difficult to assess cycling performance through race results. Therefore, this study assessed the cycling power profile characteristics of national-level junior triathletes to assist with physical assessment and program design. Thirteen male (17.0 ± 1.0 years) and 11 female (17.2 ± 1.3 years) national-level junior triathletes completed a cycling power profile that consisted of maximal intervals that lasted 6, 15, 30, 60, 240, and 600 seconds in duration. Each power profile was completed on a LeMond ergometer using the subject's own bicycle, with power output and cadence recorded for all intervals. Mean power output values for males (783 ± 134, 768 ± 118, 609 ± 101, 470 ± 65, 323 ± 38, and 287 ± 34 W) were significantly (p ≤ 0.05) higher than those for females (554 ± 92, 510 ± 89, 437 ± 75, 349 ± 56, 248 ± 39, and 214 ± 37 W) across all intervals, respectively. Peak power output values for males across the 6- and 15-second intervals (1,011 ± 178 and 962 ± 170 W) were also significantly higher than those for females (674 ± 116 and 624 ± 114 W), respectively (p ≤ 0.05). Developing junior triathletes should aim to increase their capacity across the power profile above the mean values listed. Athletes should further aim to have power outputs equal to that of the best performers and beyond to ensure that they can meet the demands of any competition situation.

The Glenoid Labral Articular Teardrop Lesion: A Chondrolabral Injury With Distinct Magnetic Resonance Imaging Findings.

PURPOSE: Evaluation and description of a pathognomonic lesion identified on magnetic resonance imaging (MRI) of a chondrolabral injury of the glenohumeral joint. METHODS: Patients were prospectively identified at the time of MRI by a characteristic teardrop appearance of a pedicled displaced chondrolabral flap in the axillary recess on coronal imaging and retrospectively reviewed. RESULTS: In a sample of 36 patients, there were 30 males (83%), and the average age was 27 years (14-75 years). Twenty-four (67%) were noted to have sustained an instability episode or had findings of instability on physical examination; 19 patients (53%) were playing a sport at the time of injury. The characteristic teardrop lesion measured 3.36 mm (1-9 mm) in the coronal plane, 6.98 mm (2-20 mm) sagittal and 11.78 mm (1-25 mm) longitudinal. The lesion was located in the anterior inferior quadrant of the glenoid. CONCLUSIONS: The glenoid labral articular teardrop (GLAT) lesion represents a pathognomonic lesion in the spectrum of chondral labral injury, indicating articular cartilage damage to the glenoid. LEVEL OF EVIDENCE: Level IV, therapeutic case series.

Midterm Follow-up of Divergent Peg Glenoid Components in Total Shoulder Arthroplasty.

Glenoid component aseptic loosening is the most common source of total shoulder arthroplasty (TSA) revision. Divergent pegged glenoids may improve fixation. Thirty-four patients underwent divergent peg TSA. Data were reviewed for component loosening. Failure was defined as the need for revision after loosening. The last postoperative radiographs were graded on a Lazarus glenoid lucency scale. Mean follow-up was 5.6 years ± 2.44 (range, 2-10 years). Radiolucency around one or fewer pegs was noted in 14/20 patients. Six glenoids had complete radiolucency around two pegs; one shoulder had gross loosening. No secondary surgery was performed. Improvements were seen in active elevation and internal rotation. The mean Shoulder Pain and Disability Index (SPADI) score decreased by 48.1 points (p = .039). Shoulder elevation, internal rotation, and SPADI scores significantly improved at final follow-up. No patients underwent revision for glenoid loosening. There were, however, a significant number of patients with radiolucency around two pegs. (Journal of Surgical Orthopaedic Advances 27(1):6-9, 2018).

Running performance in the heat is improved by similar magnitude with pre-exercise cold-water immersion and mid-exercise facial water spray.

This investigation compared the effects of external pre-cooling and mid-exercise cooling methods on running time trial performance and associated physiological responses. Nine trained male runners completed familiarisation and three randomised 5 km running time trials on a non-motorised treadmill in the heat (33°C). The trials included pre-cooling by cold-water immersion (CWI), mid-exercise cooling by intermittent facial water spray (SPRAY), and a control of no cooling (CON). Temperature, cardiorespiratory, muscular activation, and perceptual responses were measured as well as blood concentrations of lactate and prolactin. Performance time was significantly faster with CWI (24.5 ± 2.8 min; P = 0.01) and SPRAY (24.6 ± 3.3 min; P = 0.01) compared to CON (25.2 ± 3.2 min). Both cooling strategies significantly (P < 0.05) reduced forehead temperatures and thermal sensation, and increased muscle activation. Only pre-cooling significantly lowered rectal temperature both pre-exercise (by 0.5 ± 0.3°C; P < 0.01) and throughout exercise, and reduced sweat rate (P < 0.05). Both cooling strategies improved performance by a similar magnitude, and are ergogenic for athletes. The observed physiological changes suggest some involvement of central and psychophysiological mechanisms of performance improvement.