Acidic ionic liquid/water solution as both medium and proton source for electrocatalytic H2 evolution by [Ni(P2N2)2]2+ complexes.

The electrocatalytic reduction of protons to H(2) by [Ni((P(Ph)(2)N(C6H4-hex))(2)(2)]((BF(4))(2) (where P(Ph)(2)N(C6H4-hex)(2) = 1,5-di(4-n-hexylphenyl)-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane) in the highly acidic ionic liquid dibutylformamidium bis(trifluoromethanesulfonyl)amide shows a strong dependence on added water. A turnover frequency of 43,000-53,000 s(-1) has been measured for hydrogen production at 25 °C when the mole fraction of water (χ(H(2)O)) is 0.72. The same catalyst in acetonitrile with added dimethylformamidium trifluoromethanesulfonate and water has a turnover frequency of 720 s(-1). Thus, the use of an ionic liquid/aqueous solution enhances the observed catalytic rate by more than a factor of 50, compared to a similar acid in a traditional organic solvent. Complexes [Ni((P(Ph)(2)N(C6H4X))(2)(2)]((BF(4))(2) (X = H, OMe,CH(2)P(O)(OEt)(2), Br) are also catalysts in the ionic liquid/water mixture, and the observed catalytic rates correlate with the hydrophobicity of X.

High catalytic rates for hydrogen production using nickel electrocatalysts with seven-membered cyclic diphosphine ligands containing one pendant amine.

A series of Ni-based electrocatalysts, [Ni(7P(Ph)2N(C6H4X))2](BF4)2, featuring seven-membered cyclic diphosphine ligands incorporating a single amine base, 1-para-X-phenyl-3,6-triphenyl-1-aza-3,6-diphosphacycloheptane (7P(Ph)2N(C6H4X), where X = OMe, Me, Br, Cl, or CF3), have been synthesized and characterized. X-ray diffraction studies have established that the [Ni(7P(Ph)2N(C6H4X))2](2+) complexes have a square planar geometry, with bonds to four phosphorus atoms of the two bidentate diphosphine ligands. Each of the complexes is an efficient electrocatalyst for hydrogen production at the potential of the Ni(II/I) couple, with turnover frequencies ranging from 2400 to 27,000 s(-1) with [(DMF)H](+) in acetonitrile. Addition of water (up to 1.0 M) accelerates the catalysis, giving turnover frequencies ranging from 4100 to 96,000 s(-1). Computational studies carried out on the [Ni(7P(Ph)2N(C6H4X))2](2+) family indicate the catalytic rates reach a maximum when the electron-donating character of X results in the pKa of the Ni(I) protonated pendant amine matching that of the acid used for proton delivery. Additionally, the fast catalytic rates for hydrogen production by the [Ni(7P(Ph)2N(C6H4X))2](2+) family relative to the analogous [Ni(P(Ph)2N(C6H4X)2)2](2+) family are attributed to preferred formation of endo protonated isomers with respect to the metal center in the former, which is essential to attain suitable proximity to the reduced metal center to generate H2. The results of this work highlight the importance of precise pKa matching with the acid for proton delivery to obtain optimal rates of catalysis.

[Ni(P(Ph)2N(C6H4X)2)2]2+ complexes as electrocatalysts for H2 production: effect of substituents, acids, and water on catalytic rates.

A series of mononuclear nickel(II) bis(diphosphine) complexes [Ni(P(Ph)(2)N(C6H4X)(2))(2)](BF(4))(2) (P(Ph)(2)N(C6H4X)(2) = 1,5-di(para-X-phenyl)-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane; X = OMe, Me, CH(2)P(O)(OEt)(2), Br, and CF(3)) have been synthesized and characterized. X-ray diffraction studies reveal that [Ni(P(Ph)(2)N(C6H4Me)(2))(2)](BF(4))(2) and [Ni(P(Ph)(2)N(C6H4OMe)(2))(2)](BF(4))(2) are tetracoordinate with distorted square planar geometries. The Ni(II/I) and Ni(I/0) redox couples of each complex are electrochemically reversible in acetonitrile with potentials that are increasingly cathodic as the electron-donating character of X is increased. Each of these complexes is an efficient electrocatalyst for hydrogen production at the potential of the Ni(II/I) couple. The catalytic rates generally increase as the electron-donating character of X is decreased, and this electronic effect results in the favorable but unusual situation of obtaining higher catalytic rates as overpotentials are decreased. Catalytic studies using acids with a range of pK(a) values reveal that turnover frequencies do not correlate with substrate acid pK(a) values but are highly dependent on the acid structure, with this effect being related to substrate size. Addition of water is shown to dramatically increase catalytic rates for all catalysts. With [Ni(P(Ph)(2)N(C6H4CH2P(O)(OEt)2)(2))(2)](BF(4))(2) using [(DMF)H](+)OTf(-) as the acid and with added water, a turnover frequency of 1850 s(-1) was obtained.

Studies of a series of [Ni(P(R)2N(Ph)2)2(CH3CN)]2+ complexes as electrocatalysts for H2 production: substituent variation at the phosphorus atom of the P2N2 ligand.

A series of [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes containing the cyclic diphosphine ligands [P(R)(2)N(Ph)(2) = 1,5-diaza-3,7-diphosphacyclooctane; R = benzyl (Bn), n-butyl (n-Bu), 2-phenylethyl (PE), 2,4,4-trimethylpentyl (TP), and cyclohexyl (Cy)] have been synthesized and characterized. X-ray diffraction studies reveal that the cations of [Ni(P(Bn)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) and [Ni(P(n-Bu)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) have distorted trigonal bipyramidal geometries. The Ni(0) complex [Ni(P(Bn)(2)N(Ph)(2))(2)] was also synthesized and characterized by X-ray diffraction studies and shown to have a distorted tetrahedral structure. These complexes, with the exception of [Ni(P(Cy)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2), all exhibit reversible electron transfer processes for both the Ni(II/I) and Ni(I/0) couples and are electrocatalysts for the production of H(2) in acidic acetonitrile solutions. The heterolytic cleavage of H(2) by [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes in the presence of p-anisidine or p-bromoaniline was used to determine the hydride donor abilities of the corresponding [HNi(P(R)(2)N(Ph)(2))(2)](BF(4)) complexes. However, for the catalysts with the most bulky R groups, the turnover frequencies do not parallel the driving force for elimination of H(2), suggesting that steric interactions between the alkyl substituents on phosphorus and the nitrogen atom of the pendant amines play an important role in determining the overall catalytic rate.

Conjugated organometallic polymer containing a redox-active center.

The new conjugated organometallic polymer (-spacer-C[triple bond]C-Pt(PBu3)2-C[triple bond]C-)n (3; spacer = para-bis(diphenyl(tetramethyl)quinone diimine) and the cyclic mononuclear model complex, spacer'-C[triple bond]C-Pt(PEt3)2-C[triple bond]C x CuCl (4; spacer' = ortho-diphenyl-2,3,5,6-tetramethyl-1,4-benzoquinone diimine) were synthesized from the 1:1 condensation of the corresponding diethynyl ligands (2-para and 2-ortho (para- and ortho-diethynyl-diphenyl-2,3,5,6-tetramethylquinone diimine), respectively), with the trans-Pt(PBu3)2Cl2 for polymer 3 and cis-Pt(PEt3)2Cl2 for 4. The materials were characterized by GPC, DSC, ATG, and electrochemistry for polymer 3, and by X-ray diffraction for 4. Polymer 3 exhibits a M(n) of 18500, M(w) of 25000 with a PD of 1.37. The trans-geometry about Pt in polymer 3 was confirmed by 31P NMR and IR/Raman spectroscopy. The cyclic voltammogram study on the model complex trans-Pt(PBu3)2(C[triple bond]CPh)2, spacer 1-para (Me3Si-C[triple bond]C-R-C[triple bond]C-SiMe3; R = para-diphenyl-2,3,5,6-tetramethyl-1,4-benzoquinone diimine) and polymer 3 demonstrated that polymer 3 in the presence of trifluoroacetic acid (TFA) exhibits a quasi reversible 2-electron reduction process centered at 0.48 V versus SCE corresponding to the reduction of the protonated quinone diimine unit into the corresponding diamine. The UV-vis spectra of the spacer 2-para (440 nm) and polymer 3 (502 nm) are characterized by red-shifted charge transfer (CT) absorptions (C6H4C[triple bond]C --> quinone diimine for 2-para; and (C6H4C[triple bond]C)2Pt --> quinone diimine for polymer 3). These assignments are corroborated by density-functional theory (DFT) and time-dependent density-functional theory (TDDFT) computations. Polymer 3 is not luminescent in the solid state or in solution at 77 K and 298 K.

Injuries from roadside improvised explosive devices.

BACKGROUND: After the invasion of Iraq in April 2003, coalition forces have remained in the country in a bid to maintain stability and support the local security forces. The improvised explosive device (IED) has been widely used by the insurgents and is the leading cause of death and injury among Coalition troops in the region. METHOD: From January 2006, data were prospectively collected on 100 consecutive casualties who were either injured or killed in hostile action. Mechanism of injury, new Injury Severity Score (NISS), The International Classification of Disease-9th edition diagnosis, anatomic pattern of wounding, and operative management were recorded in a trauma registry. The weapon incident reports were analyzed to ascertain the type of IED employed. RESULTS: Of the 100 casualties injured in hostile action, 53 casualties were injured by IEDs in 23 incidents (mean 2.3 casualties per incident). Twenty-one of 23 (91.3%) of the IEDs employed were explosive formed projectile (EFP) type. Twelve casualties (22.6%) were either killed or died of wounds. Median NISS score of survivors was 3 (range, 1-50). All fatalities sustained unsurvivable injuries with a NISS score of 75. Primary blast injuries were seen in only 2 (3.8%) and thermal injuries in 8 casualties (15.1%). Twenty (48.7%) of survivors underwent surgery by British surgeons in the field hospital. At 18 months follow, all but one of the United Kingdom Service personnel had returned to military employment. CONCLUSIONS: The injury profile seen with EFP-IEDs does not follow the traditional pattern of injuries seen with conventional high explosives. Primary blast injuries were uncommon despite all casualties being in close proximity to the explosion. When the EFP-IED is detonated, the EFP produced results in catastrophic injuries to casualties caught in its path, but causes relatively minor injuries to personnel sited adjacent to its trajectory. Improvements in vehicle protection may prevent the EFP from entering the passenger compartments and thereby reduce fatalities.

Biocompatibility of native and functionalized single-walled carbon nanotubes for neuronal interface.

Single-walled carbon nanotubes (SWNTs) have unique mechanical, electrical, and optical properties and can be easily chemically modified; features that make them excellent candidate materials for applications as sensors and stimulators in neuronal tissue engineering. The purpose of this study was to demonstrate that SWNTs can support neuronal attachment and growth, that simple chemical modifications can be employed to control cell growth, that SWNTs do not interfere with ongoing neuronal function, and that neurons can be electrically coupled to SWNTs. Growth and attachment of the neuroblastoma*glioma NG108, a model neuronal cell, was assessed on unmodified SWNT substrates or substrates from SWNTs modified with 4-benzoic acid or 4-tert-butylphenyl functional groups using a simple functionalization method. SWNT films support cell growth, but at a reduced level compared to tissue culture-treated polystyrene. The order of viability and cell attachment was tissue culture treated polystyrene > SWNTs > 4-tert-butylphenyl-functionalized SWNTs > 4-benzoic acid-functionalized SWNTs. Decreased cell growth after culture on untreated (non adherent) polystyrene suggested that cell attachment was a critical determinant of proliferation and cell growth on SWNTs. Fluorescence and scanning electron microscopy revealed decreased neurite outgrowth in NG108 grown on SWNT substrates. We are also among the first groups to demonstrate electrical coupling of SWNTs and neurons by demonstrating that NG108 and rat primary peripheral neurons showed robust voltage-activated currents when electrically stimulated through transparent, conductive SWNT films. Our data suggest that SWNTs are flexible resource materials for tissue engineering application involving electrically excitable tissues such as muscles and nerves.

Photopatterned Hydrosilylation on Porous Silicon.

By illumination with white light porous silicon surfaces can be functionalized with alkynes and alkenes (see scheme). The hydrosilylation reactions are very simple to perform and lead to stable, patterned surfaces. This methodology opens new opportunities in the technological applications of porous silicon in both integrated circuits and sensors.

A synthetic nickel electrocatalyst with a turnover frequency above 100,000 s⁻¹ for H2 production.

Reduction of acids to molecular hydrogen as a means of storing energy is catalyzed by platinum, but its low abundance and high cost are problematic. Precisely controlled delivery of protons is critical in hydrogenase enzymes in nature that catalyze hydrogen (H(2)) production using earth-abundant metals (iron and nickel). Here, we report that a synthetic nickel complex, [Ni(P(Ph)(2)N(Ph))(2)](BF(4))(2), (P(Ph)(2)N(Ph) = 1,3,6-triphenyl-1-aza-3,6-diphosphacycloheptane), catalyzes the production of H(2) using protonated dimethylformamide as the proton source, with turnover frequencies of 33,000 per second (s(-1)) in dry acetonitrile and 106,000 s(-1) in the presence of 1.2 M of water, at a potential of -1.13 volt (versus the ferrocenium/ferrocene couple). The mechanistic implications of these remarkably fast catalysts point to a key role of pendant amines that function as proton relays.

Skill sets and competencies for the modern military surgeon: lessons from UK military operations in Southern Afghanistan.

INTRODUCTION: British military forces remain heavily committed on combat operations overseas. UK military operations in Afghanistan (Operation HERRICK) are currently supported by a surgical facility at Camp Bastion, in Helmand Province, in the south of the country. There have been no large published series of surgical workload on Operation HERRICK. The aim of this study is to evaluate this information in order to determine the appropriate skill set for the modern military surgical team. METHOD: A retrospective analysis of operating theatre records between 1st May 2006 and 1st May 2008 was performed. Data was collated on a monthly basis and included patient demographics, operation type and time of operation. RESULTS: During the study period 1668 cases required 2210 procedures. Thirty-two per cent were coalition forces (ISAF), 27% were Afghan security forces (ANSF) and 39% were civilians. Paediatric casualties accounted for 14.7% of all cases. Ninety-three per cent of cases were secondary to battle injury and of these 51.3% were emergencies. The breakdown of procedures, by specialty, was 66% (1463) orthopaedic, 21% (465) general surgery, 6% (139) head and neck, 5% (104) burns surgery and a further 4% (50) non-battle, non-emergency procedures. There was an almost twofold increase in surgical workload in the second year (1103 cases) compared to the first year of the deployment (565 cases, p<0.05). DISCUSSION: Surgical workload over the study period has clearly increased markedly since the initial deployment of ISAF forces to Helmand Province. A 6-week deployment to Helmand Province currently provides an equivalent exposure to penetrating trauma as 3 years trauma experience in the UK NHS. The spectrum of injuries seen and the requisite skill set that the military surgeon must possess is outside that usually employed within the NHS. A number of different strategies; including the deployment of trainee specialist registrars to combat hospitals, more focused pre-deployment military surgery training courses, and wet-laboratory work are proposed to prepare for future generations of surgeons operating in conflict environments.

A review of casualties during the Iraqi insurgency 2006--a British field hospital experience.

BACKGROUND: Following the invasion of Iraq in April 2003, British and coalition forces have been conducting counter-insurgency operations in the country. As this conflict has evolved from asymmetric warfare, the mechanism and spectrum of injury sustained through hostile action (HA) was investigated. METHOD: Data was collected on all casualties of HA who presented to the British Military Field Hospital Shaibah (BMFHS) between January and October 2006. The mechanism of injury, anatomical distribution, ICD-9 diagnosis and initial discharge information was recorded for each patient in a trauma database. RESULTS: There were 104 HA casualties during the study period. 18 were killed in action (KIA, 21%). Of the remaining 86 surviving casualties, a further three died of their wounds (DOW, 3.5%). The mean number of diagnoses per survivor was 2.70, and the mean number of anatomical regions injured was 2.38. Wounds to the extremities accounted for 67.8% of all injuries, a percentage consistent with battlefield injuries sustained since World War II. Open wounds and fractures were the most common diagnosis (73.8%) amongst survivors of HA. Improvised explosive devices (IEDs) accounted for the most common cause of injury amongst casualties (54%). CONCLUSIONS: Injuries in conflict produce a pattern of injury that is not seen in routine UK surgical practice. In an era of increasing surgical sub-specialisation, the deployed surgeon needs to acquire and maintain a wide range of skills from a variety of surgical specialties. IEDs have become the modus operandi for terrorists. In the current global security situation, these tactics can be equally employed against civilian targets. Therefore, knowledge and training in the management of these injuries is relevant to both military and civilian surgeons.

Neutral complexes of first row transition metals bearing unbound thiocyanates and their assembly on metallic surfaces.

A series of transition metal coordination complexes designed to assemble on gold surfaces was synthesized, their electronic structure and transitions analyzed, and their magnetic properties studied. By taking advantage of recently developed thiocyanate assembly protocols, these molecules were then assembled onto a gold surface, without the need for an inert atmosphere, to give a loosely packed monolayer. The assembled molecules exhibit properties similar to that of the bulk molecules, indicating little change in molecular structure outside of chemisorption.

A study of the formation, purification and application as a SWNT growth catalyst of the nanocluster [HxPMo12O40[subset]H4Mo72Fe30(O2CMe)15O254(H2O)98].

The synthetic conditions for the isolation of the iron-molybdenum nanocluster FeMoC [HxPMo12O40 [subset]H4Mo72Fe30(O2CMe)15O254(H2O)98], along with its application as a catalyst precursor for VLS growth of SWNTs have been studied. As-prepared FeMoC is contaminated with the Keplerate cage [H4Mo72Fe30(O2CMe)15O254(H2O)98] without the Keggin [HxPMo12O40]n- template, however, isolation of pure FeMoC may be accomplished by Soxhlet extraction with EtOH. The resulting EtOH solvate is consistent with the replacement of the water ligands coordinated to Fe being substituted by EtOH. FeMoC-EtOH has been characterized by IR, UV-vis spectroscopy, MS, XPS and 31P NMR. The solid-state 31P NMR spectrum for FeMoC-EtOH (delta-5.3 ppm) suggests little effect of the paramagnetic Fe3+ centers in the Keplerate cage on the Keggin ion's phosphorous. The high chemical shift anisotropy, and calculated T1 (35 ms) and T2 (8 ms) values are consistent with a weak magnetic interaction between the Keggin ion's phosphorus symmetrically located within the Keplerate cage. Increasing the FeCl2 concentration and decreasing the pH of the reaction mixture optimizes the yield of FeMoC. The solubility and stability of FeMoC in H2O and MeOH-H2O is investigated. The TGA of FeMoC-EtOH under air, Ar and H2 (in combination with XPS) shows that upon thermolysis the resulting Fe : Mo ratio is highly dependent on the reaction atmosphere: thermolysis in air results in significant loss of volatile molybdenum components. Pure FeMoC-EtOH is found to be essentially inactive as a pre-catalyst for the VLS growth of single-walled carbon nanotubes (SWNTs) irrespective of the substrate or reaction conditions. However, reaction of FeMoC with pyrazine (pyz) results in the formation of aggregates that are found to be active catalysts for the growth of SWNTs. Activation of FeMoC may also be accomplished by the addition of excess iron. The observation of prior work's reported growth of SWNTs from FeMoC is discussed with respect to these results.

Separation of single-walled carbon nanotubes on silica gel. Materials morphology and Raman excitation wavelength affect data interpretation.

In this report, procedures are discussed for the enrichment of single-walled carbon nanotube (SWNT) types by simple filtration of the functionalized SWNTs through silica gel. This separation uses nanotube sidewall functionalization employing two different strategies. In the first approach, a crude mixture of metallic and semiconducting SWNTs was heavily functionalized with 4-tert-butylphenyl addends to impart solubility to the entire sample of SWNTs. Two major polarity fractions were rapidly filtered through silica gel, with the solvent being removed in vacuo, heated to 700 degrees C to remove the addends, and analyzed spectroscopically. The second approach uses two different aryldiazonium salts (one with a polar grafting group and one nonpolar), appended selectively onto the different SWNTs by means of titration and monitoring by UV analysis throughout the functionalization process. The different addends accentuate the polarity differences between the band-gap-based types permitting their partial separation on silica gel. Thermal treatment regenerated pristine SWNTs in enriched fractions. The processed samples were analyzed and characterized by Raman spectroscopy. A controlled functionalization method using 4-fluorophenyl and 4-iodophenyl addends was performed, and XPS analyses yielded data on the degree of functionalization needed to affect the van Hove singularities in the UV/vis/NIR spectra. Finally, we demonstrate that relative peak intensity changes in Raman spectra can be caused by morphological changes in SWNT bundling based on differing flocculation or deposition methods. Therefore a misleading impression of separations can result, underscoring the care needed in assessing efficacies in SWNT enrichment and the prerequisite use of multiple excitation wavelengths and similar flocculation or deposition methods in comparative analyses.

Spontaneous assembly of organic thiocyanates on gold sufaces. Alternative precursors for gold thiolate assemblies.

Thiolate self-assembly on gold has proven to be a valuable technique for assembling monolayers on a wide variety of substrates. However, the oxidative instability of the thiols, especially aromatic thiols and alpha,omega-dithiols, presents several difficulties. Shown here is that thiocyanates, easily synthesized stable thiol derivatives, can be directly assembled on gold surfaces with no auxiliary reagents required. Assembly is complete in 24 h and leaves a similar gold thiolate structure as seen in typical thiol self-assembled monolayers.

Direct covalent grafting of conjugated molecules onto Si, GaAs, and Pd surfaces from aryldiazonium salts.

Using aryldiazonium salts that are air-stable and easily synthesized, we describe here a one-step, room-temperature route to direct covalent bonds between pi-conjugated organic molecules on three material surfaces: Si, GaAs, and Pd. The Si can be in the form of single crystal Si including heavily doped p-type Si, intrinsic Si, heavily doped n-type Si, on Si(111) and Si(100), and on n-type polycrystalline Si. The formation of the aryl-metal or aryl-semiconductor bond attachments was confirmed by corroborating evidence from ellipsometry, reflectance FTIR, XPS, cyclic voltammetry, and AFM analyses of the surface-grafted monolayers. A data-encompassing explanation for the mechanism suggests a diazonium activation by reduction at the open circuit potential, with aryl radical secondary products bonding to the surface. The synthetic details are included for preparing the surface-grafted monolayers and the precursor diazonium salts. This spontaneous diazonium activation reaction offers an attractive route to highly passivating, robust monolayers and multilayers on many surfaces that allow for strong bonds between carbon and surface atoms with molecular species that are near perpendicular to the surface.