Structural and thermal investigation of lignocellulosic biomass conversion for enhancing sustainable imperative in progressive organic refinery paradigm for waste-to-energy applications.

The depletion of finite fossil fuel reserves and the severe environmental degradation resulting from human activities have compelled the expeditious development and application of sustainable waste to energy technologies. To encapsulate energy and environment in sustainability paradigm, bio waste based energy production is need to be forged in organic bio refinery setup. According to world bioenergy association, biomass can cover 50 % of the primary energy demand of the world. Therefore, the present study focuses on reforming the energy mix for a clean energy generation, where, sample composition of cotton stalk was acidified in dilute (5% wt.) hydrochloric acid (HCL) for analyzing material burnout patterns in biomass conversion systems utilized in organic bio refinery sector. Advanced thermochemical burning technique, which includes pyrolysis and combustion was applied at four different leaching times from 0 to 180 min under nitrogen environment from 0 °C to 500 °C and air from 500 °C to 900 °C, respectively. Different analyses including proximate, ultimate, gross calorific value (GCV), thermos-gravimetric, kinetic, XRD, FTIR, SEM-EDS were used for analyzing the degradation of demineralized cotton stalk at different treatment rates. Proximate study demonstrated that cotton stalk leaching for 180 min has efficiently infused HCL, leading in a significant increase in fixed carbon and higher heating value of 20.23 % and 12.48%, respectively, as well as a reduction in carbon footprint of around 54.80%. The findings of proximate was validated by GCV analysis and CHNS analysis as value of carbon and hydrogen has shown increasing behavior with the time delay in demineralization Thermo-gravimetric and derivative thermo-gravimetric data analyses shows an increasing trend of conversion efficiency, with the maximum increase of 98 % reported for sample 3H.TT.DEM. XRD characterization has reported 23° to 25° angle for all the observed peaks. Sample 3H.TT.DEM has shown maximum angle inclination along with matured crystalline peak. The latter observations has been validated by FTIR spectroscopy as sample 3H.TT.DEM has reported maximum O-H group formation. Sample 3H.TT.DEM has reported lowest activation energy of 139.51 kJ*mole-1 and lowest reactivity of 0.000293649%*min 0C, due to moderate and stable reactiveness. In SEM examination, increment in pore size and number of pores within the structural matrix of cotton stalk was observed with the enhancement in acidulation process. Furthermore, in EDS analysis, 3H.TT.DEM has shown most balanced distribution of the elements. In this research, sustainable transformation of biomass is envisioned to improve the waste bio refinery system, significantly contributing to the achievement of Sustainable Development Goals 7, 12 and 13.

Thrombo-inflammatory response in hospitalised patients with COVID-19: a single institution experience.

BACKGROUND: Severe COVID-19 causes acute inflammation, which is complicated by venous thromboembolism events (VTE). However, it is unclear if VTE risk has evolved over time since the COVID-19 outbreak. AIMS: To determine markers of thrombo-inflammation and rates of symptomatic VTE in patients hospitalised for COVID-19 in a metropolitan hospital in Sydney, Australia. METHODS: A retrospective, single-centre, cohort study was performed by reviewing electronic medical records of consecutive patients admitted to Royal Prince Alfred Hospital between March 2020 and September 2021. This period included three waves of COVID-19 outbreaks in Australia with the ancestral, alpha and delta variants. Standard coagulation assays and inflammatory markers were recorded over 4 weeks. RESULTS: A total of 205 patients were consecutively admitted during the study period. Activated partial thromboplastin time, neutrophil count and C-reactive protein (CRP) were significantly increased in patients hospitalised in the intensive care unit (ICU) compared with non-ICU patients. The use of anti-inflammatory medication increased in 2021 compared with 2020. The mortality rate was 7.3% in our cohort. Ninety-four per cent of patients received anticoagulation with 6.3% of patients developing VTE. CONCLUSION: We observed lower rates of VTE compared to the internationally reported rate for the same period. We conclude that in the setting of controlled hospital admission rate and standard anticoagulation guidelines, COVID-19 resulted in similar thrombo-inflammatory response and VTE rates over the first 1.5 years of the pandemic.

Obesity, Glycemic Traits, Lifestyle Factors, and Risk of Facial Aging: A Mendelian Randomization Study in 423,999 Participants.

BACKGROUND: Several recent observational studies have associated obesity, lifestyle factors (smoking, sleep duration, and alcohol drinking), and glycemic traits with facial aging. However, whether this relationship is causal due to confounding and reverse causation is yet to be substantiated. AIMS: We aimed to assess these relationships using Mendelian randomization (MR). METHODS: For the instrumental variables, this paper selected independent single nucleotide polymorphisms (SNPs) linked to the exposures at a genome-wide state (P < 5 × 10-8) in equivalent genome-wide association studies (GWAS). Using the UK Biobank, we obtained summary-level data for facial aging on 423,999 individuals. The primary assessments were performed through the combination of complementing techniques (simple method approaches, weighted model, MR-Egger, and weighted median) and the inverse-variance-weighted method. Along with that, we examined the heterogeneity and horizontal pleiotropy through different types of sensitivity analyses. RESULTS: The correlations were (a) facial aging for body mass index (BMI, OR = 1.054, 95% CI 1.044-1.64), (b) waist/hip ratio (OR = 1.056, 95% CI 1.023-1.091), and (c) smoking (OR = 1.023, 95% CI 1.007-1.039). Equally important, the correlations for waist/hip ratio remained robust after adjusting for the genetically predicted BMI (OR = 1.028, 95% CI 1.003-1.054). However, no causal effects of alcoholic drinking, glycemic traits, and sleep duration on facial aging were observed. CONCLUSIONS: The outcomes shed light on the potential correlation of obesity and cigarette smoking with facial aging while putting forward a more comprehensive and credible foundation for the optimization of facial aging strategies. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Application of p and n-Type Silicon Nanowires as Human Respiratory Sensing Device.

Accurate and fast breath monitoring is of great importance for various healthcare applications, for example, medical diagnoses, studying sleep apnea, and early detection of physiological disorders. Devices meant for such applications tend to be uncomfortable for the subject (patient) and pricey. Therefore, there is a need for a cost-effective, lightweight, small-dimensional, and non-invasive device whose presence does not interfere with the observed signals. This paper reports on the fabrication of a highly sensitive human respiratory sensor based on silicon nanowires (SiNWs) fabricated by a top-down method of metal-assisted chemical-etching (MACE). Besides other important factors, reducing the final cost of the sensor is of paramount importance. One of the factors that increases the final price of the sensors is using gold (Au) electrodes. Herein, we investigate the sensor's response using aluminum (Al) electrodes as a cost-effective alternative, considering the fact that the electrode's work function is crucial in electronic device design, impacting device electronic properties and electron transport efficiency at the electrode-semiconductor interface. Therefore a comparison is made between SiNWs breath sensors made from both p-type and n-type silicon to investigate the effect of the dopant and electrode type on the SiNWs respiratory sensing functionality. A distinct directional variation was observed in the sample's response with Au and Al electrodes. Finally, performing a qualitative study revealed that the electrical resistance across the SiNWs renders greater sensitivity to breath than to dry air pressure. No definitive research demonstrating the mechanism behind these effects exists, thus prompting our study to investigate the underlying process.

Cellular, Molecular, Pharmacological, and Nano-Formulation Aspects of Thymoquinone-A Potent Natural Antiviral Agent.

The goal of an antiviral agent research is to find an antiviral drug that reduces viral growth without harming healthy cells. Transformations of the virus, new viral strain developments, the resistance of viral pathogens, and side effects are the current challenges in terms of discovering antiviral drugs. The time has come and it is now essential to discover a natural antiviral agent that has the potential to destroy viruses without causing resistance or other unintended side effects. The pharmacological potency of thymoquinone (TQ) against different communicable and non-communicable diseases has been proven by various studies, and TQ is considered to be a safe antiviral substitute. Adjunctive immunomodulatory effects in addition to the antiviral potency of TQ makes it a major compound against viral infection through modulating the production of nitric oxide and reactive oxygen species, decreasing the cytokine storm, and inhibiting endothelial dysfunction. Nevertheless, TQ's low oral bioavailability, short half-life, poor water solubility, and conventional formulation are barriers to achieving its optimal pharmacologic benefits. Nano-formulation proposes numerous ways to overcome these obstacles through a small particle size, a big surface area, and a variety of surface modifications. Nano-based pharmaceutical innovations to combat viral infections using TQ are a promising approach to treating surmounting viral infections.

Design, physicochemical characterisation, and in vitro cytotoxicity of cisplatin-loaded PEGylated chitosan injectable nano / sub-micron crystals.

The study aimed to develop cisplatin-loaded PEGylated chitosan nanoparticles. The optimal batch of cisplatin-loaded PEGylated chitosan nanoparticles had a + 49.9 mV zeta potential, PDI of 0.347, and % PDI of 58.9. Nanoparticle zeta size was 741.4 z. d.nm, the size in diameter was 866.7 ± 470.5 nm, and nanoparticle conductivity in colloidal solution was 0.739 mS/cm. Differential scanning calorimetry (DSC) revealed that cisplatin-loaded PEGylated chitosan nanoparticles had sharp endothermic peaks at temperatures at 168.6 °C. The thermogravimetric analysis (TGA) showed the weight loss of cisplatin-loaded PEGylated chitosan nanoparticles, which was observed as 95% at 262.76 °C. XRD investigation on cisplatin-loaded PEGylated chitosan nanoparticles exhibited distinct peaks at 2θ as 9.7°, 20.4°, 22.1°, 25.3°, 36.1°, 38.1°, 39.5°, 44.3°, and 64.5°, confirming crystalline structure. The 1H NMR analysis showed the fingerprint region of cisplatin-loaded PEGylated chitosan nanoparticles as 0.85, 1.73, and 1.00 ppm in the proton dimension and de-shielded proton peaks appeared at 3.57, 3.58, 3.58, 3.59, 3.65, 3.67, 3,67, 3,67, 3.70, 3.71, 3.77, 3.78 and 4.71 ppm. The 13C NMR spectrum showed specified peaks at 63.18, 69.20, and 70.77 ppm. The FT-IR spectra of cisplatin loaded PEGylated nanoparticles show the existence of many fingerprint regions at 3186.52, 2931.68, 1453.19, 1333.98, 1253.71, 1085.19, 1019.60, 969.98, 929.53, 888.80, 706.13, and 623.67 cm-1. The drug release kinetics of cisplatin loaded PEGylated chitosan nanoparticles showed zero order kinetics with 48% of drug release linearity fashion which has R2 value of 0.9778. Studies on the MCF-7 ATCC human breast cancer cell line in vitro revealed that the IC50 value 82.08 µg /mL. Injectable nanoparticles had good physicochemical and cytotoxic properties. This method is novel since the application of the PEGylation processes leads to an increased solubility of chitosan nanoparticles at near neutral pH.

Piezoresistance Characterization of Silicon Nanowires in Uniaxial and Isostatic Pressure Variation.

Silicon nanowires (SiNWs) are known to exhibit a large piezoresistance (PZR) effect, making them suitable for various sensing applications. Here, we report the results of a PZR investigation on randomly distributed and interconnected vertical silicon nanowire arrays as a pressure sensor. The samples were produced from p-type (100) Si wafers using a silver catalyzed top-down etching process. The piezoresistance response of these SiNW arrays was analyzed by measuring their I-V characteristics under applied uniaxial as well as isostatic pressure. The interconnected SiNWs exhibit increased mechanical stability in comparison with separated or periodic nanowires. The repeatability of the fabrication process and statistical distribution of measurements were also tested on several samples from different batches. A sensing resolution down to roughly 1m pressure was observed with uniaxial force application, and more than two orders of magnitude resistance variation were determined for isostatic pressure below atmospheric pressure.

Stealth Liposomes (PEGylated) Containing an Anticancer Drug Camptothecin: In Vitro Characterization and In Vivo Pharmacokinetic and Tissue Distribution Study.

Numerous attempts to overcome the poor water solubility of cam ptothecin (CPT) by various nano drug delivery systems are described in various sources in the literature. However, the results of these approaches may be hampered by the incomplete separation of free CPT from the formulations, and this issue has not been investigated in detail. This study aimed to promote the solubility and continuous delivery of CPT by developing long-lasting liposomes using various weights (M.W. 2000 and 5000 Daltons) of the hydrophilic polymer polyethylene glycol (PEG). Conventional and PEGylated liposomes containing CPT were formulated via the lipid film hydration method (solvent evaporation) using a rotary flash evaporator after optimising various formulation parameters. The following physicochemical characteristics were investigated: surface morphology, particle size, encapsulation efficiency, in vitro release, and formulation stability. Different molecular weights of PEG were used to improve the encapsulation efficiency and particle size. The stealth liposomes prepared with PEG5000 were discrete in shape and with a higher encapsulation efficiency (83 ± 0.4%) and a prolonged rate of drug release (32.2% in 9 h) compared with conventional liposomes (64.8 ± 0.8% and 52.4%, respectively) and stealth liposomes containing PEG2000 (79.00 ± 0.4% and 45.3%, respectively). Furthermore, the stealth liposomes prepared with PEG5000 were highly stable at refrigeration temperature. Significant changes were observed using various pharmacokinetic parameters (mean residence time (MRT), half-life, elimination rate, volume of distribution, clearance, and area under the curve) of stealth liposomes containing PEG2000 and PEG5000 compared with conventional liposomes. The stealth liposomes prepared with PEG5000 showed promising results with a slow rate of release over a long period compared with conventional liposomes and liposomes prepared with PEG2000, with altered tissue distribution and pharmacokinetic parameters.

Development and Optimization of Methylcellulose-Based Nanoemulgel Loaded with Nigella sativa Oil for Oral Health Management: Quadratic Model Approach.

The present study aimed to develop a local dental nanoemulgel formulation of Nigella sativa oil (NSO) for the treatment of periodontal diseases. NSO purchased from a local market was characterized using a GC-MS technique. A nanoemulsion containing NSO was prepared and incorporated into a methylcellulose gel base to develop the nanoemulgel formulation. The developed formulation was optimized using a Box-Behnken statistical design (quadratic model) with 17 runs. The effects of independent factors, such as water, oil, and polymer concentrations, were studied on two dependent responses, pH and viscosity. The optimized formulation was further evaluated for droplet size, drug release, stability, and antimicrobial efficacy. The developed formulation had a pH of 7.37, viscosity of 2343 cp, and droplet size of 342 ± 36.6 nm. Sustained release of the drug from the gel for up to 8 h was observed, which followed Higuchi release kinetics with non-Fickian diffusion. The developed nanoemulgel formulation showed improved antimicrobial activity compared to the plain NSO. Given the increasing emergence of periodontal diseases and antimicrobial resistance, an effective formulation based on a natural antibacterial agent is warranted as a dental therapeutic agent.

Clinical, Nutritional, and Functional Evaluation of Chia Seed-Fortified Muffins.

Health-protective functional foods are gaining popularity in the world of nutrition because they promote excellent health while decreasing pharmaceutical burdens. Chia seeds (CS) (Salvia hispanica L.), the greatest vegetative source of α-linolenic acid, bioactive proteins, and fibers, are among the top unconventional oilseeds shown to have bounteous benefits against various non-communicable diseases. Purposely, this study was designed to integrate roasted CS powder into white-flour-based ordinary bakery goods to improve their nutritional and nutraceutical profiles. CS efficacy in normal and hyperlipidemic Sprague-Dawley rats resulted in mitigating blood glucose, triglycerides, total cholesterol, and low-density lipoprotein cholesterol while elevating high-density lipoprotein cholesterol, hematocrit, hemoglobin, red blood cell counts, and platelets. The nutritional profiling of chia-fortified muffins indicated significant increases of 47% in fat, 92% in fiber, 15% in protein, and 62% in minerals. The farinographic experiments of CS-blends revealed generally improved dough quality features with a significant rise in the degree of softening as fortification levels increased. A marketable recipe for CSF-muffins with several degrees of fortification demonstrated a significant rise in fat, 92% rise in fiber, 15% rise in protein, and 62% rise in minerals. Sensorial evaluation by trained taste panelists revealed a maximum appraisal of the 15% chia-fortified muffins due to aroma, appearance, and overall acceptability, and were forwarded for being acceptable for commercialization.

Assessment of Binary Agarose-Carbopol Buccal Gels for Mucoadhesive Drug Delivery: Ex Vivo and In Vivo Characterization.

Agarose (AG) is a naturally occurring biocompatible marine seaweed extract that is converted to hydrocolloid gel in hot water with notable gel strength. Currently, its mucoadhesion properties have not been fully explored. Therefore, the main aim of this study was to evaluate the mucoadhesive potential of AG binary dispersions in combination with Carbopol 934P (CP) as mucoadhesive gel preparations. The gels fabricated via homogenization were evaluated for ex vivo mucoadhesion, swelling index (SI), dissolution and stability studies. The mucoadhesive properties of AG were concentration dependent and it was improved by the addition of CP. Maximum mucoadhesive strength (MS) (27.03 g), mucoadhesive flow time (FT) (192.2 min), mucoadhesive time in volunteers (MT) (203.2 min) and SI (23.6% at 4 h) were observed with formulation F9. The mucoadhesive time investigated in volunteers (MT) was influenced by AG concentration and was greater than corresponding FT values. Formulations containing 0.3%, w/v AG (F3 and F9) were able to sustain the release (~99%) for both drugs till 3 h. The optimized formulation (F9) did not evoke any inflammation, irritation or pain in the buccal cavity of healthy volunteers and was also stable up to 6 months. Therefore, AG could be considered a natural and potential polymer with profound mucoadhesive properties to deliver drugs through the mucosal route.

Sulforaphane: A review of its therapeutic potentials, advances in its nanodelivery, recent patents, and clinical trials.

Traditionally, herbal supplements have shown an exceptional potential of desirability for the prevention of diseases and their treatment. Sulforaphane (SFN), an organosulfur compound belongs to the isothiocyanate (ITC) group and is mainly found naturally in cruciferous vegetables. Several studies have now revealed that SFN possesses broad spectrum of activities and has shown extraordinary potential as antioxidant, antitumor, anti-angiogenic, and anti-inflammatory agent. In addition, SFN is proven to be less toxic, non-oxidizable, and its administration to individuals is well tolerated, making it an effective natural dietary supplement for clinical trials. SFN has shown its ability to be a promising future drug molecule for the management of various diseases mainly due to its potent antioxidant properties. In recent times, several newer drug delivery systems were designed and developed for this potential molecule in order to enhance its bioavailability, stability, and to reduce its side effects. This review focuses to cover numerous data supporting the wide range of pharmacological activities of SFN, its drug-related issues, and approaches to improve its physicochemical and biological properties, including solubility, stability, and bioavailability. Recent patents and the ongoing clinical trials on SFN are also summarized.

Renoprotective effects of cinnamon oil against APAP-Induced nephrotoxicity by ameliorating oxidative stress, apoptosis and inflammation in rats.

Acetaminophen (APAP) is used as a primary medication in relieving moderate pain and fever. However, APAP is associated with toxic effects in renal tissue that appear because of its free radicals property. The principle goal of the present work is to assess the kidney damage by APAP and its restore antioxidative property of cinnamon oil (CO). Animals were distributed into six animals each in six groups. Rats were administered with three varying doses of CO from 50 to 200 mg/kg b.w. respectively and only a single dose of APAP. APAP induced an alteration in serum biochemical markers, imbalance in oxidative parameters, morphological changes in kidney tissue along with increased interleukins cytokines (IL-1ß & 6) and caspase (3, 9) levels. CO administration significantly ameliorates all the parameters and histopathological changes were restored. Moreover, it also restored the activities of antioxidative enzymes. Our work proved that an variance of oxidative markers in the kidney by APAP is ameliorated by CO in rats. Thus, CO could be used in reducing APAP-induced nephrotoxicity.

IoT-Based Sensor Data Fusion for Determining Optimality Degrees of Microclimate Parameters in Commercial Greenhouse Production of Tomato.

Optimum microclimate parameters, including air temperature (T), relative humidity (RH) and vapor pressure deficit (VPD) that are uniformly distributed inside greenhouse crop production systems are essential to prevent yield loss and fruit quality. The objective of this research was to determine the spatial and temporal variations in the microclimate data of a commercial greenhouse with tomato plants located in the mid-west of Iran. For this purpose, wireless sensor data fusion was incorporated with a membership function model called Optimality Degree (OptDeg) for real-time monitoring and dynamic assessment of T, RH and VPD in different light conditions and growth stages of tomato. This approach allows growers to have a simultaneous projection of raw data into a normalized index between 0 and 1. Custom-built hardware and software based on the concept of the Internet-of-Things, including Low-Power Wide-Area Network (LoRaWAN) transmitter nodes, a multi-channel LoRaWAN gateway and a web-based data monitoring dashboard were used for data collection, data processing and monitoring. The experimental approach consisted of the collection of meteorological data from the external environment by means of a weather station and via a grid of 20 wireless sensor nodes distributed in two horizontal planes at two different heights inside the greenhouse. Offline data processing for sensors calibration and model validation was carried in multiple MATLAB Simulink blocks. Preliminary results revealed a significant deviation of the microclimate parameters from optimal growth conditions for tomato cultivation due to the inaccurate timer-based heating and cooling control systems used in the greenhouse. The mean OptDeg of T, RH and VPD were 0.67, 0.94, 0.94 in January, 0.45, 0.36, 0.42 in June and 0.44, 0.0, 0.12 in July, respectively. An in-depth analysis of data revealed that averaged OptDeg values, as well as their spatial variations in the horizontal profile were closer to the plants' comfort zone in the cold season as compared with those in the warm season. This was attributed to the use of heating systems in the cold season and the lack of automated cooling devices in the warm season. This study confirmed the applicability of using IoT sensors for real-time model-based assessment of greenhouse microclimate on a commercial scale. The presented IoT sensor node and the Simulink model provide growers with a better insight into interpreting crop growth environment. The outcome of this research contributes to the improvement of closed-field cultivation of tomato by providing an integrated decision-making framework that explores microclimate variation at different growth stages in the production season.

Overview of microbes based fabricated biogenic nanoparticles for water and wastewater treatment.

Treatment of toxic and emerging pollutants (T&EPs) is increasing the threats to the survival of conventional wastewater treatment (WWTs) technologies. The high installation and operational costs of advanced treatment technologies have shifted the research interest to the development of economical and reliable technology for management of T&EPs. Thus, recently biogenic nanoparticles (BNPs) fabricated using microbes/microorganisms are getting tremendous research interest due to their unique properties (i.e. high specific surface area, desired morphology, catalytic reactivity) for the biodegradation and biosorption of T&EPs. In addition, BNPs can be manufactured using metal contaminated water which indicates a hidden potential for resource recovery and utilization. Therefore, the present study discusses the adsorptive and catalytic performance of BNPs in the removal of T&EPs from water (W) and wastewater (WW). In addition, inspired by the superior performance of BNPs in advance WWT, a model of BNPs based WWT resource recovery and utilization process is also proposed. Finally, main issues i.e. mass production, leaching, poisoning/toxicity, regeneration, reusability and fabrication costs and process optimization are discussed which are main hinders in the transfer of BNPs based WWT technologies from laboratory to commercial scale.

Encapsulated green magnetic nanoparticles for the removal of toxic Pb2+ and Cd2+ from water: Development, characterization and application.

Current research is based on an innovative approach of the fabrication of encapsulated sustainable, green, phytogenic magnetic nanoparticles (PMNPs), to inhibit the generation of secondary pollutants (Iron/Feo) during water treatment applications. These novel bio-magnetic membrane capsules (BMMCs) were prepared using two-step titration gel crosslink method, with polyvinyl alcohol and sodium alginate matrix as the model encapsulating materials to eliminate potentially toxic metals (Pb2+ and Cd2+) from water. The development of BMMCs was characterized by FTIR, XRD, XPS, SEM, VSM, TGA and EDX techniques. The effects of various operating parameters, adsorbent dose, contact time, solution pH, temperature, initial concentration of metals cations and co-existing ions were studied. The hysteresis loops have illustrated an excellent super-paramagnetic nature, demonstrating the smooth encapsulation of PMNPs without losing their magnetic properties. The maximum monolayer adsorptive capacities estimated at pH 6.5 by the Langmuir isotherm model were 548 and 610.67 mg/g for Pb2+ and Cd2+, respectively. The novel BMMCs did not only control oxidation of PMNPs but also sustained the adsorptive removal over a wide range of pH (3-8), and the electrostatic interaction and ion-exchange were the core adsorption mechanisms. The BMMCs could easily be regenerated using 25% HNO3 as an eluent for successful usage in seven repeated cycles. Therefore, the BMMCs as a material can be used as an excellent sorbent or composite material to remove toxic metals Pb2+ and Cd2+, showing strong potential for improving water and wastewater treatment technologies.

Assessment of severity of acute gastroenteritis in the paediatric Pakistani population by Modified Vesikari Score.

OBJECTIVE: To assess the severity of acute gastroenteritis in paediatric population. METHODS: This observational cross-sectional study was conducted at 93 randomly selected outpatient centres with paediatric practice across Pakistan between July 2014 and January 2015, involving children between 3 to 48 months of age suffering from acute gastroenteritis. The severity of acute gastroenteritis was measured using Modified Vesikari Score. SPSS 18 was used for data analysis. RESULTS: There were 1,756subjects having a mean age of 18.6±12.0 months. There were 220(12.52%) children ?6 months out of whom 73(33%) were exclusively breastfed. Most children had moderate 1,041(59.3%) and severe 403(22.9%) acute gastroenteritis. Overall 1,401(79.8%) carers were females, of whom 1,080(77.1%) were mothers with a mean age of 29.7±6.7 years. Oral rehydration solution 1,357(77.3%), plain water 1,083(61.7%), antipyretics 783(44.6%) and anti-diarrhoeals 645(36.7%) were most common medicines administered at home by the carers. Mean duration between gastroenteritis onset and seeking consultation was 2.7±1.7 days. Most common treatment provided by physicians were oral rehydration solution 1,451(82.6%), antibiotic 1,294(73.7%) and probiotic 1,105(62.9%). Worsening of symptoms 1,152(65.6%) was the most common reason for seeking consultation. CONCLUSIONS: Most children assessed with acute gastroenteritis showed moderate to severe disease symptoms.|.

Mangiferin: a natural miracle bioactive compound against lifestyle related disorders.

The current review article is an attempt to explain the therapeutic potential of mangiferin, a bioactive compound of the mango, against lifestyle-related disorders. Mangiferin (2-ß-D-glucopyranosyl-1,3,6,7-tetrahydroxy-9H-xanthen-9-one) can be isolated from higher plants as well as the mango fruit and their byproducts (i.e. peel, seed, and kernel). It possesses several health endorsing properties such as antioxidant, antimicrobial, antidiabetic, antiallergic, anticancer, hypocholesterolemic, and immunomodulatory. It suppresses the activation of peroxisome proliferator activated receptor isoforms by changing the transcription process. Mangiferin protects against different human cancers, including lung, colon, breast, and neuronal cancers, through the suppression of tumor necrosis factor α expression, inducible nitric oxide synthase potential, and proliferation and induction of apoptosis. It also protects against neural and breast cancers by suppressing the expression of matrix metalloproteinase (MMP)-9 and MMP-7 and inhibiting enzymatic activity, metastatic potential, and activation of the ß-catenin pathway. It has the capacity to block lipid peroxidation, in order to provide a shielding effect against physiological threats. Additionally, mangiferin enhances the capacity of the monocyte-macrophage system and possesses antibacterial activity against gram-positive and gram-negative bacteria. This review summarizes the literature pertaining to mangiferin and its associated health claims.

Prevalence of antibodies to Neospora caninum in the serum of camels (Camelus dromedarius) from central Punjab, Pakistan.

Infection with the Apicomplexan parasite Neospora caninum occurs in domestic and wild animals worldwide. This parasite causes significant economic losses in the dairy industry worldwide. The current study was designed to assess the prevalence of N. caninum antibodies in the sera of camels (Camelus dromedarius) from Rakh Mahni, Bhakkar, Pakistan, to better understand the epidemiology of this important cause of bovine abortion in Pakistan. Eighty-one sera samples collected from apparently healthy camels (male = 19, female = 62) were tested for antibodies against N. caninum by using a commercially available competitive Enzyme Linked Immunosorbent assay diagnostic kit. Nine (11.1%) of 81 sera samples were found positive for antibodies to N. caninum. No significant (P > 0.05) difference in seroprevalence was observed between male and female camels or between different breeds. An increasing trend of seropositivity to N. caninum was seen with the age of animals indicating postnatal exposure to N. caninum infection. However, this increase in prevalence was not significant (P > 0.05). However, a significant (P < 0.05) difference in seroprevalence was noted among feeding style of animals, i.e., stall feeding, grazing, and mixed (grazing and stall feeding) feeding style. The prevalence was significantly (P < 0.05) higher in female animals 26.1% (6/23) with abortion history that of animals have had no such history 5.1% (2/39). Presence of antibodies to N. caninum in the sera of camels indicates that further studies are required to evaluate the importance of N. caninum as a cause of abortion or neonatal disease in these animals.

Wheat Allergy and Intolerence; Recent Updates and Perspectives.

The current review paper highlights the complicacies associated with communities relying on wheat as their dietary staple. Although, wheat is an important source of nutrients but is also linked with allergenic responses in genetically susceptible subjects. The wheat proteins especially α-amylase inhibitors, ω-5 gliadins, prolamins, nonprolamin, glucoprotein, and profilins are of significance importance. The allergenic responses are further categorized into IgE-mediated and non-IgE-mediated reactions. Conjugation and degranulation of the IgEs with the allergens results in release of several mediators. In contrary, non-IgE-mediated wheat allergy depends on immune complexes formed by food and food antibodies and cell-mediated immunity. As results, different diseases tend to occur on the completion of these reactions, i.e., celiac disease, baker's asthma, diarrhea, atopic dermatitis, and urticaria. This instant paper highlighted the concept of food allergy with special reference to wheat. The models are developed that are included in this paper showing the wheat allergen, their possible routes, impact on human health, and indeed possible remedies. The paper would provide the basic information for the researchers, common man, and allied stakeholders to cater the issue in details. However, the issue needs the attention of the researchers as there is a need to clarify the issues of wheat allergy and wheat intolerance.