Single-Atom Mn Catalysts via Integration with Mn Sub Nano-Clusters Synergistically Enhance Oxygen Reduction Reaction.

Integrating single atoms and clusters into one system represents a novel strategy for achieving the desired catalytic performance. In comparison to single-atom catalysts, catalysts combining single atoms and clusters harness the advantages of both, thus displaying greater potential. Nevertheless, constructing single-atom-cluster systems remains challenging, and the fundamental mechanism for enhancing catalytic activity remains elusive. In this study, a directly confined preparation of a 3D hollow sea urchin-like carbon structure (MnSA/MnAC-SSCNR) is developed. Mn single atoms synergistically interact with Mn clusters, optimizing and reducing energy barriers in the reaction pathway, thus enhancing reaction kinetics. Consequently, in contrast to Mn single-atom catalysts (MnSA-SSCNR), MnSA/MnAC-SSCNR exhibits significantly improved oxygen reduction activity, with a half-wave potential (E1/2) of 0.90 V in 0.1 m KOH, surpassing that of MnSA-SSCNR and Pt/C. This work demonstrates a strategy of remote synergy between heterogeneous single atoms and clusters, which not only contributes to electrocatalytic reactions but also holds potential for reactions involving more complex products.

Terephthalic Acid Intercalated CoNi-LDH Materials for Improved Li-O2 Battery.

CoNi-LDH (layered CoNi double hydroxides) hollow nanocages with specific morphology are obtained by Ni ion etching of ZIF-67 (Zeolitic imidazolate framework-67). The structure of the layered materials is further modified by molecular intercalation. The original interlayer anions are replaced by the ion exchange effect of terephthalic acid, which helps to increase the interlayer distance of the material. The intercalated cage-like structures not only benefit for the storage of oxygen, and the discharge product reaction, but also have more support between the material layers. The experimental results show that the excessive use of intercalation agent will affect structural stability of the intercalated CoNi-LDH. By adjusting the amount of terephthalic acid, the intercalated CoNi-LDH-2 (with 0.02 mmol terephthalic acid intercalated) is not easy to collapse after 209 cycles and shows the best electrochemical performance in Li-O2 battery.

Regulating the Spin State of FeIII Enhances the Magnetic Effect of the Molecular Catalysis Mechanism.

Aqueous-phase oxygen evolution reaction (OER) is the bottleneck of water splitting. The formation of the O-O bond involves the generation of paramagnetic oxygen molecules from the diamagnetic hydroxides. The spin configurations might play an important role in aqueous-phase molecular electrocatalysis. However, spintronic electrocatalysis is almost an uncultivated land for the exploration of the oxygen molecular catalysis process. Herein, we present a novel magnetic FeIII site spin-splitting strategy, wherein the electronic structure and spin states of the FeIII sites are effectively induced and optimized by the Jahn-Teller effect of Cu2+. The theoretical calculations and operando attenuated total reflectance-infrared Fourier transform infrared (ATR FT-IR) reveal the facilitation for the O-O bond formation, which accelerates the production of O2 from OH- and improves the OER activity. The Cu1-Ni6Fe2-LDH catalyst exhibits a low overpotential of 210 mV at 10 mA cm-2 and a low Tafel slope (33.7 mV dec-1), better than those of the initial Cu0-Ni6Fe2-LDHs (278 mV, 101.6 mV dec-1). With the Cu2+ regulation, we have realized the transformation of NiFe-LDHs from ferrimagnets to ferromagnets and showcase that the OER performance of Cu-NiFe-LDHs significantly increases compared with that of NiFe-LDHs under the effect of a magnetic field for the first time. The magnetic-field-assisted Cu1-Ni6Fe2-LDHs provide an ultralow overpotential of 180 mV at 10 mA cm-2, which is currently one of the best OER performances. The combination of the magnetic field and spin configuration provides new principles for the development of high-performance catalysts and understandings of the catalytic mechanism from the spintronic level.

Crystal Phase Conversion on Cobalt Oxide: Stable Adsorption toward LiO2 for Film-Like Discharge Products Generation in Li-O2 Battery.

Regulating the structure and morphology of discharge product is one of the key points for developing high performance Li-O2 batteries (LOBs). In this study, the reaction mechanism of LOB is successfully controlled by the regulated fine structure of cobalt oxide through tuning the crystallization process. It is demonstrated that the cobalt oxide with lower crystallinity shows stronger affinity toward LiO2 , inducing the growth of film-like LiO2 on the electrode surface and inhibiting the further conversion to Li2 O2 . The batteries catalyzed by the lower crystallinity cobalt oxide hollow spheres which pyrolyzed from ZIF-67 at 260 °C (ZIF-67-260), go through the generation and decomposition of amorphous film-like LiO2 , which significantly reduces the charge overpotential and improves the cycle life. By contrast, the ZIF-67 hollow spheres pyrolyzed at 320 °C (ZIF-67-320) with better crystallinity are more likely to go through the solution-mediated mechanism and induce the aggregation of discharge product, resulting in the sluggish kinetics and limited performance. The combined density functional theory data also directly support the strong relationship between the adsorption toward LiO2 by the electrocatalyst and the battery performance. This work provides an important way for tuning the intermediate and constructing the high-performance battery system.

Ultrathin Two-Dimensional Bimetal-Organic Framework Nanosheets as High-Performance Electrocatalysts for Benzyl Alcohol Oxidation.

Ultrathin two-dimensional metal-organic frameworks (2D MOFs) have the potential to improve the oxidation of benzyl alcohol (BA) with a large surface area and open catalytic active sites. To achieve high-efficiency electrocatalysts for the oxidation of benzyl alcohol, a moderate solvothermal method was evolved to synthesize a series of 2D MOFs on nickel foam (Ni-MOF/NF, NiCo-61-MOF/NF, NiCo-21-MOF/NF). As the electrocatalyst used for the oxidation of benzyl alcohol, NiCo-61-MOF/NF presented a lower overpotential and superior chemical durability than other electrocatalysts; it only required a potential of ∼1.52 V (vs RHE) to reach 338.16 mA cm-2, with an oxidation efficiency of more than 86%. Besides, after continuous electrocatalysis for 20 000 s at 1.42 V (vs RHE), the current density of NiCo-61-MOF/NF nanosheets was still 38.67 mA cm-2 with 77.34% retention. This demonstrated that NiCo-61-MOF/NF nanosheet electrocatalysts had great potential for benzyl alcohol oxidation. From both the experimental and theoretical studies, it was discovered that NiCo-61-MOF/NF nanosheets have the highest electrocatalytic activity due to their distinctive ultrathin 2D structure, optimized electron structure, and more accessible active sites. This finding would pave a brand-new thought for the design of electrocatalysts with electrocatalytic activity for benzyl alcohol oxidation (EBO).

Polypyrrole-Mo3S13: An Efficient Sorbent for the Capture of Hg2+ and Highly Selective Extraction of Ag+ over Cu2.

The new material Polypyrrole-Mo3S13 (abbr. Mo3S13-Ppy) is a new material prepared by ion-exchange between Ppy-NO3 and (NH4)2Mo3S13. The Mo3S13-Ppy was designed to exhibit strong selectivity for Ag+ and highly toxic Hg2+ in mixtures with other ions. It displays an apparent selectivity ranking of Hg2+ > Ag+ ≥ Co2+, Ni2+, Cu2+, Zn2+, Cd2+, and Pb2+. The strong affinity of Mo3S13-Ppy for Ag+ and Hg2+ was confirmed with extremely high distribution coefficients (Kd) (∼107 mL/g) and remarkable removal efficiencies (>99.99%), resulting in <1 ppb concentrations of these ions. Furthermore, Mo3S13-Ppy achieved excellent separation selectivity for Ag+ from Cu2+ (even at a high Cu2+/Ag+ ratio, the molar ratio of 867 and mass ratio of 500) because of the special structure of Mo3S132- and its component Mo4+ and (S2)2-. This is promising for the direct extraction of low-grade silver from copper-rich minerals. The maximum Ag uptake capacity of 408 mg/g is redox-based and surprisingly involves the deposition of large, millimeter sized, metallic silver (Ag0) crystals on the surface of Mo3S13-Ppy.

Engineering Lithium Ions Embedded in NiFe Layered Double Hydroxide Lattices To Activate Laminated Ni2+ Sites as High-Efficiency Oxygen Evolution Reaction Catalysts.

NiFe layered double hydroxides (LDHs) have been denoted as benchmark non-noble-metal electrocatalysts for the oxygen evolution reaction (OER). However, for laminates of NiFe LDHs, the edge sites are active, but the basal plane is inert, leading to underutilization as catalysts for the OER. Herein, for the first time, light and electron-deficient Li ions are intercalated into the basal plane of NiFe LDHs. The results of theoretical calculations and experiments both showed that electrons would be transferred from near Ni2+ to the surroundings of Li+ , resulting in electron-deficient properties of the Ni sites, which would function as "electron-hungry" sites, to enhance surface adsorption of electron-rich oxygen-containing groups, which would enhance the effective activity for the OER. As demonstrated by the catalytic performance, the Li-NiFe LDH electrodes showed an ultralow overpotential of only 298 mV at 50 mA cm-2 , which was lower than that of 347 mV for initial NiFe LDHs and lower than that of 373 mV for RuO2 . Reasonable intercalation adjustment effectively activates laminated Ni2+ sites and constructs the electron-deficient structure to enhance its electrocatalytic activity, which sheds light on the functional treatment of catalytic materials.

Hierarchical Nanoassembly of MoS2/Co9S8/Ni3S2/Ni as a Highly Efficient Electrocatalyst for Overall Water Splitting in a Wide pH Range.

The design of low-cost yet high-efficiency electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) over a wide pH range is highly challenging. We now report a hierarchical co-assembly of interacting MoS2 and Co9S8 nanosheets attached on Ni3S2 nanorod arrays which are supported on nickel foam (NF). This tiered structure endows high performance toward HER and OER over a very broad pH range. By adjusting the molar ratio of the Co:Mo precursors, we have created CoMoNiS-NF- xy composites ( x: y means Co:Mo molar ratios ranging from 5:1 to 1:3) with controllable morphology and composition. The three-dimensional composites have an abundance of active sites capable of universal pH catalytic HER and OER activity. The CoMoNiS-NF-31 demonstrates the best electrocatalytic activity, giving ultralow overpotentials (113, 103, and 117 mV for HER and 166, 228, and 405 mV for OER) to achieve a current density of 10 mA cm-2 in alkaline, acidic, and neutral electrolytes, respectively. It also shows a remarkable balance between electrocatalytic activity and stability. Based on the distinguished catalytic performance of CoMoNiS-NF-31 toward HER and OER, we demonstrate a two-electrode electrolyzer performing water electrolysis over a wide pH range, with low cell voltages of 1.54, 1.45, and 1.80 V at 10 mA cm-2 in alkaline, acidic, and neutral media, respectively. First-principles calculations suggest that the high OER activity arises from electron transfer from Co9S8 to MoS2 at the interface, which alters the binding energies of adsorbed species and decreases overpotentials. Our results demonstrate that hierarchical metal sulfides can serve as highly efficient all-pH (pH = 0-14) electrocatalysts for overall water splitting.

Morphology-Controlled Synthesis of Ni-MOFs with Highly Enhanced Electrocatalytic Performance for Urea Oxidation.

MOFs present potential application in electrocatalysis. The structure-activity of the Ni-MOFs with different morphologies, nanowires, neurons, and urchins is systemically investigated. The Ni-MOFs were controllably synthesized via the facile solvothermal method. Among them, the Ni-MOF nanowires are endowed with the highest electrocatalytic activity due to the unique structure, more exposed active sites, lower charge transfer resistance, and the fast and direct electron transfer in 1D structures. The typical morphology of the Ni-MOF nanowires is ca. 10 nm in diameter and several micrometers in length. When employed as an electrocatalyst in urea oxidation reaction, it exhibits a lower overpotential than and superior stability to the Ni-MOFs with other morphologies. Ni-MOF nanowires require a potential of ∼0.80 V (vs Ag/AgCl) to obtain 160 mA cm-2. In addition, after continuous electrocatalyzing for 3600 s at 0.40 V (vs Ag/AgCl), the current density retention of Ni-MOF nanowires could still reach more than 60% (>12 mA cm-2), which demonstrates Ni-MOF nanowires as promising electrocatalysts for urea oxidation.

3D Porous Amorphous γ-CrOOH on Ni Foam as Bifunctional Electrocatalyst for Overall Water Splitting.

The development of novel and highly efficient bifunctional electrocatalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is an ongoing challenge. The Cr3+ cation has a special electronic configuration (t32ge0g), which facilitates charge transfer and electron capture. However, Cr-based materials applied on water-splitting electrocatalysis is still a research void up to now. Herein, a novel amorphous γ-CrOOH was developed as a bifunctional electrocatalyst toward overall water splitting for the first time. It shows extraordinary HER activity with an ultralow overpotential of only 149 mV at 50 mA cm-2. Meantime, there is a small overpotential of 334 mV at 50 mA cm-2 for the OER. Importantly, the bifunctional electrocatalyst for overall water-splitting electrocatalysis can work with a cell voltage of merely 1.56 V at 10 mA cm-2. Amorphous γ-CrOOH has effectively enhanced the intrinsic electrochemical activity via density functional theoretical calculations. Therefore, this work not only provides a new method for preparation of amorphous γ-CrOOH but also expands the types of catalysts for water splitting.

High-purity production of ultrathin boron nitride nanosheets via shock chilling and their enhanced mechanical performance and transparency in nanocomposite hydrogels.

A simple, highly efficient, and eco-friendly method is prepared to divide bulk boron nitride (BN) into boron nitride nanosheets (BNNSs). Due to the anisotropy of the hexagonal BN expansion coefficient, bulk BN is exfoliated utilizing the rapid and tremendous change in temperature, the extreme gasification of water, and ice thermal expansion pressure under freeze drying. The thickness of most of the BNNSs was less than ∼3 nm with a yield of 12-16 wt%. The as-obtained BNNS/polyacrylamide (PAAm) composite hydrogels exhibited outstanding mechanical properties. The tensile strength is fives times the bulk of the BN/PAAm composite hydrogels and the elongations are more than nine-fold the bulk of the BN/PAAm composite hydrogels. The BNNS/PAAm nanocomposite hydrogels also exhibited excellent elastic recovery, and the hysteresis of the BNNS nanocomposite hydrogels was negligible even after 30 cycles with a maximum tensile strain (ε max) of 700%. This work provides new insight into the fabrication of BN/polymer nanocomposites utilizing the excellent mechanical properties and transparency of BN. The results confirm that a few layers of BNNSs can also efficiently and directly improve the mechanical properties of composite polymer due to its stronger surface free energy and better wettability.

Rapid Simultaneous Removal of Toxic Anions [HSeO3]-, [SeO3]2-, and [SeO4]2-, and Metals Hg2+, Cu2+, and Cd2+ by MoS42- Intercalated Layered Double Hydroxide.

We demonstrate fast, highly efficient concurrent removal of toxic oxoanions of Se(VI) (SeO42-) and Se(IV) (SeO32-/HSeO3-) and heavy metal ions of Hg2+, Cu2+, and Cd2+ by the MoS42- intercalated Mg/Al layered double hydroxide (MgAl-MoS4-LDH, abbr. MoS4-LDH). Using the MoS4-LDH as a sorbent, we observe that the presence of Hg2+ ions greatly promotes the capture of SeO42-, while the three metal ions (Hg2+, Cu2+, Cd2+) enable a remarkable improvement in the removal of SeO32-/HSeO3-. For the pair Se(VI)+Hg2+, the MoS4-LDH exhibits outstanding removal rates (>99.9%) for both Hg2+ and Se(VI), compared to 81% removal for SeO42- alone. For individual SeO32- (without metal ions), 99.1% Se(IV) removal is achieved, while ≥99.9% removals are reached in the presence of Hg2+, Cu2+, and Cd2+. Simultaneously, the removal rates for these metal ions are also >99.9%, and nearly all concentrations of the elements can be reduced to <10 ppb, a limit acceptable for drinking water. The maximum sorption capacities for individual Se(VI) and Se(IV) are 85 and 294 mg/g, respectively. The 294 mg/g capacity for Se(IV) reaches a record value, placing the MoS4-LDH among the highest-capacity selenite adsorbing materials described to date. More interestingly, the presence of metal ions extremely accelerates the capture of the selenium oxoanions because of the reactions of the metal ions with the interlayer MoS42- anions. The sorptions of Se(VI)+Hg and Se(IV)+M (M = Hg2+, Cu2+, Cd2+) are exceptionally rapid, showing >99.5% removals for Hg2+ within 1 min and ∼99.0% removal for Se(VI) within 30 min, as well as >99.5% removals for pairs Cu2+ and Se(IV) within 10 min, and Cd2+ and Se(IV) within 30 min. During the sorption of SeO32-/HSeO3-, reduction of Se(IV) occurs to Se0 caused by the S2- sites in MoS42-. Sorption kinetics for the oxoanions follows a pseudo-second-order model consistent with chemisorption. The intercalated material of MoS4-LDH is very promising as a highly effective filter for decontamination of water with toxic Se(IV)/Se(VI) oxoanions along with heavy metals such as Hg2+, Cd2+, and Cu2+.

In-situ growth of ultrathin cobalt monoxide nanocrystals on reduced graphene oxide substrates: an efficient electrocatalyst for aprotic Li-O2 batteries.

Large over-potentials during battery operation remain a big obstacle for aprotic Li-O2 batteries. Herein, a nanocomposite of about 4 nm cobalt monoxide nanocrystals grown in situ on reduced graphene oxide substrates (CoO/RGO) has been synthesized via a thermal decomposition method. The CoO/RGO cathode delivers a high initial capacity of 14 450 mAh g-1 at a current density of 200 mA g-1. Simultaneously it displays little capacity fading after 32 cycles with a capacity restriction of 1000 mAh g-1. Additionally, compared with Ketjenblack and general CoO nanoparticles, ultrathin CoO nanoparticle-decorated RGO electrode materials with a delaminated structure display an observable reduction of over-potential in Li-O2 batteries. These results demonstrate that the introduction of RGO improves the performance of CoO, which is a promising strategy for optimizing the design of electrocatalysts for aprotic rechargeable Li-O2 batteries.

Efficient uranium capture by polysulfide/layered double hydroxide composites.

There is a need to develop highly selective and efficient materials for capturing uranium (normally as UO2(2+)) from nuclear waste and from seawater. We demonstrate the promising adsorption performance of S(x)-LDH composites (LDH is Mg/Al layered double hydroxide, [S(x)](2-) is polysulfide with x = 2, 4) for uranyl ions from a variety of aqueous solutions including seawater. We report high removal capacities (q(m) = 330 mg/g), large K(d)(U) values (10(4)-10(6) mL/g at 1-300 ppm U concentration), and high % removals (>95% at 1-100 ppm, or ∼80% for ppb level seawater) for UO2(2+) species. The S(x)-LDHs are exceptionally efficient for selectively and rapidly capturing UO2(2+) both at high (ppm) and trace (ppb) quantities from the U-containing water including seawater. The maximum adsorption coeffcient value K(d)(U) of 3.4 × 10(6) mL/g (using a V/m ratio of 1000 mL/g) observed is among the highest reported for U adsorbents. In the presence of very high concentrations of competitive ions such as Ca(2+)/Na(+), S(x)-LDH exhibits superior selectivity for UO2(2+), over previously reported sorbents. Under low U concentrations, (S4)(2-) coordinates to UO2(2+) forming anionic complexes retaining in the LDH gallery. At high U concentrations, (S4)(2-) binds to UO2(2+) to generate neutral UO2S4 salts outside the gallery, with NO3(-) entering the interlayer to form NO3-LDH. In the presence of high Cl(-) concentration, Cl(-) preferentially replaces [S4](2-) and intercalates into LDH. Detailed comparison of U removal efficiency of S(x)-LDH with various known sorbents is reported. The excellent uranium adsorption ability along with the environmentally safe, low-cost constituents points to the high potential of S(x)-LDH materials for selective uranium capture.

Direct Synthesis of Unilamellar MgAl-LDH Nanosheets and Stacking in Aqueous Solution.

Two-dimensional (2D) materials, such as graphene, inorganic oxides, and hydroxides, are one of the most extensively studied classes of materials due to their unilamellar crystallites or nanosheet structures. In this study, instead of using the universal exfoliation method of the bulky crystal precursor, 2D crystals/nanosheets of MgAl-layered double hydroxides (LDHs) were synthesized in formamide. We propose that the obtained crystals are unilamellar according to the XRD, TEM, and AFM observations. The HRTEM and fast Fourier transform images confirm that the crystal structures are the same as those of the exfoliated MgAl-LDH nanosheets. The directly synthesized sheets can stack into a 3D crystal structure, which is the same as that of typical LDHs except for the disordered orientation of the a-/b- crystal axis of each sheet. This result provides not only a novel approach to the preparation of 2D crystals but also insight into the formation mechanism of LDHs.

Nanocage structure derived from sulfonated ß-cyclodextrin intercalated layered double hydroxides and selective adsorption for phenol compounds.

Nanocage structures derived from decasulfonated ß-cyclodextrin (SCD) intercalated ZnAl- and MgAl- layered double hydroxides (LDHs) were prepared through calcination-rehydration reactions. The ZnAl- and MgAl-LDH layers revealed different basal spacings (1.51 nm for SCD-ZnAl-LDH and 1.61 nm for SCD-MgAl-LDH) when contacting SCD, while producing similar monolayer and vertical SCD orientations with cavity axis perpendicular to the LDH layer. The structures of the SCD-LDH and carboxymethyl-ß-cyclodextrin (CMCD)-LDH intercalates were fully analyzed and compared, and a structural model for the SCD-LDH was proposed. The thermal stability of SCD after intercalation was remarkably enhanced, with decomposition temperature increased by 230 °C. The adsorption property of the SCD-LDH composites for phenol compounds (the effects of adsorption time and phenol concentration on adsorption) was investigated completely. The monolayer arrangement of the interlayer SCD did not affect the adsorption efficiency toward organic compounds, which verified the highly swelling ability of the layered compounds in solvents. Both composites illustrated preferential adsorptive efficiency for 2,3-dimethylphenol (DMP) in comparison with other two phenols of hydroquinone (HQ) and tert-butyl-phenol (TBP), resulting from appropriate hydrophobicity and steric hindrance of DMP. For the two phenols of HQ and TBP, SCD-MgAl-LDH gave better adsorption capacity compared with SCD-ZnAl-LDH. The double-confinement effect due to the combination of the parent LDH host and intercalated secondary host may impose high selectivity for guests. This kind of nanocage structure may have potential applications as adsorbents, synergistic agents, and storage vessels for particular guests.

"Polyoxometalate electron sponge" induces the accurate regulation of electron states at Ni sites to enhance oxidation of water.

Because of their special features, NiFe-LDHs (nickel iron layered double hydroxides) are prospective OER (oxygen evolution reaction) catalysts that might be utilized to catalyse the electrolysis of water and produce hydrogen to address the energy crisis. In this work, the electronic structure and electrocatalytic performance of the NiFe-LDH were accurately regulated by optimizing the Ni sites, which was enabled by adjacent metal sites coordinated with the "polyoxometalate electron sponge". With extension of the modification time, the Ni 2p binding energy, the Ni3+/Ni2+ ratio and the OER properties were gradually tuned, which indicated accurate regulation of active Ni sites by the "polyoxometalate electron sponge" on a temporal scale. Additionally, NiFe-LDH-PW12-12 h (NiFe-LDH modified by polyoxometalate anions for 12 h) showed the highest OER performance along with fast electron transfer, superior reaction kinetics and electrochemical durability, with an overpotential ∼68 mV lower than that of NiFe-LDH. This work provides an accurate strategy for regulating the electronic structures of active metal sites for the OER.

Highly Ordered Hierarchical Macro-Mesoporous Carbon-Supported Cobalt Electrocatalyst for Efficient Oxygen Evolution Reaction.

Metal-organic frameworks (MOFs) and their derivatives have been extensively employed in Oxygen Evolution Reaction (OER) catalysts due to their significantly larger specific surface areas, distinct metal centers, and well-organized porous structures. However, the microporous structure of MOFs and their derivatives presents mass transfer resistance, limiting their further development. Drawing inspiration from hierarchical structures allowing for the transport and exchange of substances in the biological world, we designed and fabricated biomimetic layered porous structures within ZIF-67 and its derivatives. Based on this, we achieved a three-dimensional ordered layered porous nitrogen-doped carbon-coated magnetic cobalt catalyst (3DOLP Co@NDC) with a biomimetic pore structure. It is found that the 3DOLP Co@NDC (352 mV @10 mA cm-1) was better than Co@NDC (391 mV @10 mA cm-1). The introduction of a three-dimensional ordered layered porous structure is conducive to increasing the specific surface area of the material, increasing the electrochemical active area, and improving the catalytic performance of the material. The introduction of a three-dimensional ordered layered porous structure would help to build a bionic grade pore structure. The existence of biomimetic grade pore structure can effectively reduce the mass transfer resistance, improve the material exchange efficiency, and accelerate the reaction kinetics.

Intercalation of azamacrocyclic crown ether into layered rare-earth hydroxide (LRH): secondary host-guest reaction and efficient heavy metal removal.

A carboxyethyl substituted azacrown ether (CSAE) derivative was intercalated as a second host into a parent host of layered gadolinium hydroxides (LGdH) by an anion-exchange reaction. The influence of intercalation temperature and starting material ratios of CSAE/LRH on the structures and compositions of CSAE-LRH nanocomposites were investigated. Higher temperature and larger initial CSAE-LGdH weight ratios favor of higher degree of ion exchange at a certain range, while lower temperature gives good morphology for the composites. The adsorptive properties for transition and heavy metal ions were studied using the 20 °C-reacted composite, which showed higher adsorptivity toward transition and heavy metal ions, accompanied by the introduction of nitrate anions. The adsorptive capacity for transition metal ions was in the sequence of Cu(2+) > Zn(2+)∼Ni(2+)∼Co(2+) with a high selectivity to Cu(2+). For the heavy metal ions Ag(+), Hg(2+), Pb(2+), and Cd(2+), the composite showed markedly high selectivity for Ag(+) and Hg(2+). When putting Cu(2+), Ag(+), Hg(2+), Pb(2+), and Cd(2+) together, Ag(+) and Hg(2+) still have higher adsorptive selectivity over Pb(2+) and Cd(2+), and Cu(2+) has also relatively high selectivity but not as high as Ag(+) and Hg(2+). The nanocomposites with a second host in the interlayer are one promising kind of material because of the synergy of the steric effect of the parent host (LRH layer) and the particular characteristics of the secondary host (interlayer crown ether anions).

Charge Transport Dynamics of Quasi-Type II Perovskite Janus Nanocrystals in High-Performance Photoconductors.

CsPbBr3-Pb4S3Br2 Janus nanocrystals (NCs) are the only nanomaterial where the epitaxial structure of perovskite and chalcogenide materials has been realized at the nanoscale, but their exciton dynamics mechanism has not yet been thoroughly investigated or applied in photodetection applications. This work reports an attractive device performance of perovskite photoconductors based on epitaxial CsPbBr3-Pb4S3Br2 Janus NCs, as well as the carrier relaxation and transfer mechanism of the heterojunction. By a combination of transient optical absorption and quantum dynamics simulation, it is demonstrated that the photogenerated holes on CsPbBr3 can be successfully extracted by Pb4S3Br2, while the hole transfer proceeds about three times faster than energy loss and remains "hot" for about 300 fs. This feature has favorable effects on long-range charge separation and transport; therefore, the Janus NCs photoconductors exhibit an exceptional responsivity of 34.0 A W-1 and specific detectivity of 1.26 × 1014 Jones.