Sensitive response mechanism of ARGs and MGEs to initial designed temperature during swine manure and food waste co-composting.

The rapid aerobic composting process has been used to reduce organic wastes, but the associated risks of antibiotic resistance genes (ARGs) need to evaluate in an efficient way. The primary objective of this work was to explore the underlying mechanism of initial adjustment in composting temperature on the variation of ARGs, mobile genetic elements (MGEs), and microbial composition during co-composting. The co-composting was initially externally heated (T2) for 5 days. The results showed that ARGs abundance in conventional composting (T1) was reduced by 49.36%, while multidrug was enriched by 86.16% after a period of 30 days. While in T2 ARGs were removed by 79.46% particularly the fraction of sulfonamide, multidrug, and vancomycin resistance genes were >90% without rebounding of any ARGs. Whereas, MGEs were reduced by 68.12% and 93.62% in T1 and T2, while the half-lives of ARGs and MGEs were lower in T2 compared to T1 (86.3%,86.7%). T2 also affected the metabolism function by regulating carbohydrate metabolism (9.62-10.39%) and amino acid metabolism (9.92-10.93%). Apart from this, the potential human pathogenic bacteria Pseudomonas was reduced by 90.6% in T2 and only 32.9% in T1 respectively. Network analysis showed that Ureibacillus, Weissella, Corynebacterium, Escherichia-Shigella, Acinetobacter were the main host of multiple genes. Structural equation models exhibited that bacterial communities were mainly responsible for the enrichment of ARGs in T1, whereas, it was directly affected by MGEs in T2. Similarly, ARGs variation was directly related to composting temperature. With this simple strategy, ARGs associated risk can be significantly reduced in composting.

Co-occurrence pattern of ARGs and N-functional genes in the aerobic composting system with initial elevated temperature.

Animal manure is known to harbor antibiotic resistance genes (ARGs). Aerobic composting is a prevalent cost-effective and sustainable method to treat animal waste. However, the effect of initially elevated temperature on antibiotic resistome during the composting process is unclear. In this study composting was subjected to initial external heating (EHC) for a period of 5 days compared to conventional composting (CC). After composting ARGs abundance was significantly reduced by 2.43 log in EHC and 1.95 log in CC. Mobile genetic elements (MGEs) also exhibited a reduction of 1.95 log in EHC and 1.49 log in CC. However, during the cooling phase, the genes resisting macrolide lincosamide and streptogramin B (MLSB) rebounded by 0.04 log in CC. The potential human pathogenic bacteria Pseudomonas (41.5-61.5%) and Actinobacteria (98.4-98.8%) were significantly reduced in both treatments and the bulk of targeted antibiotics were eliminated by 80.74% in EHC and 68.98% in CC. ARGs and N-functional genes (NFGs), mainly denitrification genes, were carried by the same microbial species, such as Corynebacterium sp. and Bacillus sp., of the dominant phylum. Redundancy analysis (RDA) revealed that CC microbial communities played a key role in the enrichment of ARGs while in EHC the variation of ARGs was attributed to the composting temperature. The number of high-risk ARGs was also lower in EHC (4) compared with CC (6) on day 30. These results provide insight into the effects of an initially enhanced temperature on ARGs removal and the relationship between ARGs and NFGs during the composting process.

Enhancement and Restoration of Scratched Murals Based on Hyperspectral Imaging-A Case Study of Murals in the Baoguang Hall of Qutan Temple, Qinghai, China.

Environmental changes and human activities have caused serious degradation of murals around the world. Scratches are one of the most common issues in these damaged murals. We propose a new method for virtually enhancing and removing scratches from murals; which can provide an auxiliary reference and support for actual restoration. First, principal component analysis (PCA) was performed on the hyperspectral data of a mural after reflectance correction, and high-pass filtering was performed on the selected first principal component image. Principal component fusion was used to replace the original first principal component with a high-pass filtered first principal component image, which was then inverse PCA transformed with the other original principal component images to obtain an enhanced hyperspectral image. The linear information in the mural was therefore enhanced, and the differences between the scratches and background improved. Second, the enhanced hyperspectral image of the mural was synthesized as a true colour image and converted to the HSV colour space. The light brightness component of the image was estimated using the multi-scale Gaussian function and corrected with a 2D gamma function, thus solving the problem of localised darkness in the murals. Finally, the enhanced mural images were applied as input to the triplet domain translation network pretrained model. The local branches in the translation network perform overall noise smoothing and colour recovery of the mural, while the partial nonlocal block is used to extract the information from the scratches. The mapping process was learned in the hidden space for virtual removal of the scratches. In addition, we added a Butterworth high-pass filter at the end of the network to generate the final restoration result of the mural with a clearer visual effect and richer high-frequency information. We verified and validated these methods for murals in the Baoguang Hall of Qutan Temple. The results show that the proposed method outperforms the restoration results of the total variation (TV) model, curvature-driven diffusion (CDD) model, and Criminisi algorithm. Moreover, the proposed combined method produces better recovery results and improves the visual richness, readability, and artistic expression of the murals compared with direct recovery using a triple domain translation network.

Urination behaviours of senior citizens in five Chinese cities: Results of a cross-sectional survey.

AIM: To investigate the urination behaviours of senior citizens in China. METHODS: Stratified random sampling was used to recruit senior citizens who met the inclusion criteria from five cities in China. After training by researchers, participants recorded their urination behaviours in real time by using the validated 7-day 24-hour urination behaviour record, which consisted of frequency of urination, time of urination, urinary urgency and urine colour. RESULTS: Of the 551 recruited participants, 524 (233 male and 291 female) completed the survey, yielding a completion rate of 95.1%. The median frequency of urination was 7.4 times per day. The frequency of urination was highest among participants in Guangzhou, at 8.0 times per day (χ2  = 29.356; P < .001), and participants in the first percentile body mass index group, at 8.0 times per day (χ2  = 10.344; P = .016). The percentage of participants who urinated >7 times during the day was 44.3%. The percentage of participants who urinated ≥1 time at night was 77.5%. The number of times participants reported feeling no urge to urinate, a strong urge to urinate and an uncomfortable urge to urinate accounted for 59.7%, 62.8% and 24.8% of all records of urinary urgency, respectively. Instances of patients having no urge to urinate, a strong urgent to urinate and an uncomfortable urge accounted for 16.1%, 13.3% and 2.9% of all instances of urination, respectively. The number of times participants whose urine was yellow and dark yellow accounted for 69.1% and 18.9% of all records of urine colour, respectively. Urine with yellow and dark yellow colour accounted for 13.0% and 1.5%, respectively. CONCLUSION: Unhealthy urination behaviours, including urinating at night and holding back urine, were common among senior citizens. This result can provide information for the prevention and control of urinary system diseases.

Image scanning microscopy with a long depth of focus generated by an annular radially polarized beam.

Image scanning microscopy (ISM) is a promising tool for bioimaging owing to its integration of signal to noise ratio (SNR) and super resolution superior to that obtained in confocal scanning microscopy. In this paper, we introduce the annular radially polarized beam to the ISM, which yields an axially extended excitation focus and enhanced resolution, providing a new possibility to obtain the whole information of thick specimen with a single scan. We present the basic principle and a rigorous theoretical model for ISM with annular radially polarized beam (ISM-aRP). Results show that the resolution of ISM-aRP can be enhanced by 4% compared with that in conventional ISM, and the axial extent of the focus is longer than 6λ. The projected view of the simulated fluorescent beads suspension specimen demonstrates the validity of ISM-aRP to obtain the whole information of volume sample. Moreover, this simple method can be easily integrated into the commercial laser scanning microscopy systems.

Depolarization and repolarization parameters on ECG predict recurrence after atrial fibrillation ablation in patients with hypertrophic cardiomyopathy.

INTRODUCTION: The outcomes of atrial fibrillation (AF) ablation remain suboptimal. It is important to identify which AF patients will most likely benefit from ablation and who are more likely to show treatment failure, especially in those with structural heart disease such as hypertrophic cardiomyopathy (HCM). METHODS AND RESULTS: We enrolled 120 HCM patients who underwent primary AF ablation (48 with persistent AF). Preprocedural QTc was measured and corrected using the Bazett's formula, and the distribution of fragmentation of the QRS complex (fQRS) was recorded. Arrhythmia recurrence was defined as any kind of documented atrial tachyarrhythmia of more than 30 seconds. Overall, arrhythmia recurrence occurred in 69 patients after 13.4 months' follow-up. fQRS was present in 71 (59.17%) patients and was most commonly (81.69%) observed in the inferior leads. QTc more than 448 ms could predict arrhythmia recurrence with a sensitivity of 68.1% and specificity of 68.6%. Patients with QTc more than 448 ms (hazard ratio [HR]: 1.982; 95% confidence interval [CI]: 1.155-3.402; P = .013) or those with fQRS+ (HR: 1.922; 95% CI: 1.151-3.210; P = .012) were at an increased risk of recurrence. A combination of fQRS+ and QTc more than 448 ms was superior to fQRS or QTc alone in predicting arrhythmia recurrence. CONCLUSION: In patients with HCM undergoing AF ablation, QTc prolongation, specifically >448 ms, and presence of fQRS are independent risk factors for arrhythmia recurrence at follow-up. The combination of these two parameters has greater predictive value and would help to identify patients who are at the highest risk of procedural failure.

Efficient Planar Perovskite Solar Cells with Improved Fill Factor via Interface Engineering with Graphene.

Organic-inorganic hybrid lead halide perovskites have been widely investigated in optoelectronics both experimentally and theoretically. The present work incorporates chemically modified graphene into nanocrystal SnO2 as the electron transporting layer (ETL) for highly efficient planar perovskite solar cells. The modification of SnO2 with highly conductive two-dimensional naphthalene diimide-graphene can increase surface hydrophobicity and form van der Waals interaction between the surfactant and the organic-inorganic hybrid lead halide perovskite compounds. As a result, highly efficient perovskite solar cells with power conversion efficiency of 20.2% can be achieved with an improved fill factor of 82%, which could be mainly attributed to the augmented charge extraction and transport.

Tailored Phase Conversion under Conjugated Polymer Enables Thermally Stable Perovskite Solar Cells with Efficiency Exceeding 21.

The precise control of stoichiometric balance and ionic defects on the surface of solution-processed perovskite is critical to the performance and stability of perovskite solar cells (pero-SCs). Here, we introduce a low-cost and stable conjugated donor polymer (PTQ10) as interfacial layer in the planar n-i-p structured pero-SCs. The polymer was applied to the perovskite intermediate phase before the thermal annealing. This treatment significantly reduced the loss of surface organic cation during thermal annealing. Importantly, the kinetics of phase conversion of perovskite was influenced, and perovskite crystal showed a more preferential orientation. Moreover, the polymer proved to be an effective hole extraction layer due to the proper energy alignment with perovskite. Finally, a champion power conversion efficiency of the planar pero-SCs was achieved at 21.2% with a high fill factor of 81.6%. The devices also showed great ambient and thermal stability. This work presents a facile way of perovskite surface control to achieve high-performance pero-SCs.

Unraveling the High Open Circuit Voltage and High Performance of Integrated Perovskite/Organic Bulk-Heterojunction Solar Cells.

We have demonstrated high-performance integrated perovskite/bulk-heterojunction (BHJ) solar cells due to the low carrier recombination velocity, high open circuit voltage (VOC), and increased light absorption ability in near-infrared (NIR) region of integrated devices. In particular, we find that the VOC of the integrated devices is dominated by (or pinned to) the perovskite cells, not the organic photovoltaic cells. A Quasi-Fermi Level Pinning Model was proposed to understand the working mechanism and the origin of the VOC of the integrated perovskite/BHJ solar cell, which following that of the perovskite solar cell and is much higher than that of the low bandgap polymer based organic BHJ solar cell. Evidence for the model was enhanced by examining the charge carrier behavior and photovoltaic behavior of the integrated devices under illumination of monochromatic light-emitting diodes at different characteristic wavelength. This finding shall pave an interesting possibility for integrated photovoltaic devices to harvest low energy photons in NIR region and further improve the current density without sacrificing VOC, thus providing new opportunities and significant implications for future industry applications of this kind of integrated solar cells.

Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells.

The ionic nature of perovskite photovoltaic materials makes it easy to form various chemical interactions with different functional groups. Here, we demonstrate that interfacial chemical interactions are a critical factor in determining the optoelectronic properties of perovskite solar cells. By depositing different self-assembled monolayers (SAMs), we introduce different functional groups onto the SnO2 surface to form various chemical interactions with the perovskite layer. It is observed that the perovskite solar cell device performance shows an opposite trend to that of the energy level alignment theory, which shows that chemical interactions are the predominant factor governing the interfacial optoelectronic properties. Further analysis verifies that proper interfacial interactions can significantly reduce trap state density and facilitate the interfacial charge transfer. Through use of the 4-pyridinecarboxylic acid SAM, the resulting perovskite solar cell exhibits striking improvements to the reach the highest efficiency of 18.8%, which constitutes an ∼10% enhancement compared to those without SAMs. Our work highlights the importance of chemical interactions at perovskite/electrode interfaces and paves the way for further optimizing performances of perovskite solar cells.

Streptomyces gamaensis sp. nov., a novel actinomycete with antifungal activity isolated from soil in Gama, Chad.

During an investigation exploring potential sources of novel species and natural products, a novel actinomycete with antifungal activity, designated strain NEAU-Gz11T, was isolated from a soil sample, which was collected from Gama, Chad. The isolate was found to have morphological and chemotaxonomic characteristics typical of members of the genus Streptomyces. 16S rRNA gene sequence similarity studies showed that strain NEAU-Gz11T belongs to the genus Streptomyces with high sequence similarity to Streptomyces hiroshimensis JCM 4098T (98.0 %). Similarities to other type strains of the genus Streptomyces were lower than 98.0 %. However, the physiological and biochemical characteristics and low levels of DNA-DNA relatedness could differentiate the isolate genotypically and phenotypically from S. hiroshimensis JCM 4098T. Therefore, the strain is concluded to represent a novel species of the genus Streptomyces, for which the name Streptomyces gamaensis sp. nov. is proposed. The type strain is NEAU-Gz11T (=CGMCC 4.7304T=DSM 101531T).

Guanidinium: A Route to Enhanced Carrier Lifetime and Open-Circuit Voltage in Hybrid Perovskite Solar Cells.

Hybrid perovskites have shown astonishing power conversion efficiencies owed to their remarkable absorber characteristics including long carrier lifetimes, and a relatively substantial defect tolerance for solution-processed polycrystalline films. However, nonradiative charge carrier recombination at grain boundaries limits open circuit voltages and consequent performance improvements of perovskite solar cells. Here we address such recombination pathways and demonstrate a passivation effect through guanidinium-based additives to achieve extraordinarily enhanced carrier lifetimes and higher obtainable open circuit voltages. Time-resolved photoluminescence measurements yield carrier lifetimes in guanidinium-based films an order of magnitude greater than pure-methylammonium counterparts, giving rise to higher device open circuit voltages and power conversion efficiencies exceeding 17%. A reduction in defect activation energy of over 30% calculated via admittance spectroscopy and confocal fluorescence intensity mapping indicates successful passivation of recombination/trap centers at grain boundaries. We speculate that guanidinium ions serve to suppress formation of iodide vacancies and passivate under-coordinated iodine species at grain boundaries and within the bulk through their hydrogen bonding capability. These results present a simple method for suppressing nonradiative carrier loss in hybrid perovskites to further improve performances toward highly efficient solar cells.

Morphology Evolution of High Efficiency Perovskite Solar Cells via Vapor Induced Intermediate Phases.

Morphology is critical component to achieve high device performance hybrid perovskite solar cells. Here, we develop a vapor induced intermediate phase (VIP) strategy to manipulate the morphology of perovskite films. By exposing the perovskite precursor films to different saturated solvent vapor atmospheres, e.g., dimethylformamide and dimethylsufoxide, dramatic film morphological evolution occurs, associated with the formation of different intermediate phases. We observe that the crystallization kinetics is significantly altered due to the formation of these intermediate phases, yielding highly crystalline perovskite films with less defect states and high carrier lifetimes. The perovskite solar cells with the reconstructed films exhibits the highest power conversion efficiency (PCE) up to 19.2% under 1 sun AM 1.5G irradiance, which is among the highest planar heterojunction perovskite solar cells. Also, the perovskite solar cells with VIP processing shows less hysteresis behavior and a stabilized power output over 18%. Our work opens up a new direction for morphology control through intermediate phase formation, and paves the way toward further enhancing the device performances of perovskite solar cells.

Actinomadura gamaensis sp. nov., a novel actinomycete isolated from soil in Gama, Chad.

A novel single spore-producing actinomycete, designated strain NEAU-Gz5(T), was isolated from a soil sample from Gama, Chad. A polyphasic taxonomic study was carried out to establish the status of this strain. The diamino acid present in the cell wall is meso-diaminopimelic acid. Glucose, mannose and madurose occur in whole cell hydrolysates. The polar lipids were found to consist of diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylinositol mannoside and an unidentified glycolipid. The predominant menaquinones were identified as MK-9(H8) and MK-9(H6). The predominant cellular fatty acids were found to be C16:0, iso-C15:0, iso-C16:0 and C18:0 10-methyl. Phylogenetic analysis based on the 16S rRNA gene showed that strain NEAU-Gz5(T) belongs to the genus Actinomadura and is closely related to Actinomadura oligospora JCM 10648(T) (ATCC 43269(T); 98.3 % similarity). However, the low level of DNA-DNA relatedness and some different phenotypic characteristics allowed the strain to be distinguished from its close relatives. Therefore, it is concluded that strain NEAU-Gz5(T) represents a novel species of the genus of Actinomadura, for which the name Actinomadura gamaensis sp. nov. is proposed. The type strain is NEAU-Gz5(T) (= CGMCC 4.7301(T) = DSM 100815(T)).

An endophytic Streptomyces sp. strain DHV3-2 from diseased root as a potential biocontrol agent against Verticillium dahliae and growth elicitor in tomato (Solanum lycopersicum).

Plant endophytes play important roles in biocontrol of plant diseases. Actinomycetes are used for biocontrol of fungal diseases caused by Verticillium dahliae. Many studies have focused on the endophytic actinomycetes isolated from the roots of healthy plants, but few on those from the roots of diseased plants. In the present research, actinomycetes were isolated from the roots of diseased and healthy tomato plants, respectively. The results showed that, in total, 86 endophytic actinomycetes were isolated for screening of their antimicrobial activities, 8 of which showed antagonism to V. dahliae in vitro. Among the 8 antagonistic strains, 5 (out of 36) were from the roots of diseased plants, with inhibition diameter zones ranging from 11.2 to 18.2 mm, whereas 3 (out of 50) were from the roots of healthy plants, with inhibition diameter zones ranging from 11.5 to 15.5 mm. Endophytic strain DHV3-2 was isolated from the root of a diseased plant and demonstrated a potent effect against V. dahliae and other pathogenic fungi by showing the largest inhibition diameter zones among all the eight antagonistic strains. Thus, strain DHV3-2 was chosen to investigate its biological control efficacies in vivo. Further study showed that the disease incidence and disease severity indices of tomato Verticillium wilt decreased significantly (P < 0.05). We also found that the plant shoot fresh weight and height increased greatly (P < 0.05) upon treatment with strain DHV3-2 compared to the plants uninoculated in greenhouse conditions. Root colonization showed that strain DHV3-2 had the higher root-colonizing capacity in the roots of infected plants compared with the roots of healthy plants. This isolate was identified as Streptomyces sp. based on morphological characteristics and 16S rRNA gene analysis. In conclusion, the roots of diseased tomato plants are a potential reservoir of biological control actinomycetes, and Streptomyces sp. strain DHV3-2 is a potential biocontrol agent against V. dahliae and growth elicitor in tomato.

Working Mechanism for Flexible Perovskite Solar Cells with Simplified Architecture.

In this communication, we report an efficient and flexible perovskite solar cell based on formamidinium lead trihalide (FAPbI3) with simplified configuration. The device achieved a champion efficiency of 12.70%, utilizing direct contact between metallic indium tin oxide (ITO) electrode and perovskite absorber. The underlying working mechanism is proposed subsequently, via a systematic investigation focusing on the heterojunction within this device. A significant charge storage has been observed in the perovskite, which is believed to generate photovoltage and serves as the driving force for charge transferring from the absorber to ITO electrode as well. More importantly, this simplified device structure on flexible substrates suggests its compatibility for scale-up fabrication, which paves the way for commercialization of perovskite photovoltaic technology.

Streptomonospora halotolerans sp. nov., an actinomycete isolated from soil.

A novel actinomycete, designated strain NEAU-Jh2-17(T), was isolated from muddy soil collected from a riverbank in Jilin Province, northern China, and characterized using a polyphasic approach. The 16S rRNA gene sequence of strain NEAU-Jh2-17(T) showed highest similarity to those of Streptomonospora nanhaiensis 12A09(T) (99.26%), Nocardiopsis rosea YIM 90094(T) (97.31%), Streptomonospora halophila YIM 91355(T )(97.24%) and Streptomonospora arabica S186(T) (97.02%). Phylogenetic analysis based on 16S rRNA gene sequences demonstrated that strain NEAU-Jh2-17(T) fell within a cluster consisting of the type strains of species of the genus Streptomonospora and formed a stable clade with S. nanhaiensis 12A09(T) in trees generated with two algorithms. Key morphological and chemotaxonomic properties also confirmed the affiliation of strain NEAU-Jh2-17(T) to the genus Streptomonospora. The cell wall contained meso-diaminopimelic acid as the diagnostic diamino acid and whole-cell hydrolysates contained glucose, ribose and galactose. The polar lipids were diphosphatidylglycerol (DPG), phosphatidylethanolamine (PE), phosphatidylglycerol (PG), phosphatidylcholine (PC), phosphatidylinositol (PI), phosphatidylinositol mannoside (PIM), two unknown phospholipids (PLs) and two unknown glycolipids (GLs). The predominant menaquinones were MK-10(H2), MK-10(H8), MK-10(H6) and MK-10(H4). Major fatty acids were C18 : 0 10-methyl, anteiso-C17 : 0, C16 : 0 10-methyl, iso-C15 : 0, C17 : 0 10-methyl and C18 : 0. The DNA G+C content was 71.82 mol%. However, a combination of DNA-DNA hybridization results and some phenotypic characteristics demonstrated that strain NEAU-Jh2-17(T) could be distinguished from its closely related relatives. Therefore, strain NEAU-Jh2-17(T) is considered to represent a novel species of the genus Streptomonospora, for which the name Streptomonospora halotolerans sp. nov. is proposed. The type strain is NEAU-Jh2-17(T) ( = CGMCC 4.7218(T) = JCM 30347(T)).

Sphaerisporangium aureirubrum sp. nov., an actinomycete isolated from soil.

A novel actinomycete, designated strain NEAU-GQTH1-3T, was isolated from muddy soil collected from a stream in Qitaihe, Heilongjiang Province, north-east China and characterized using a polyphasic approach. Phylogenetic analysis based on the 16S rRNA gene sequence indicated that the organism should be assigned to the genus Sphaerisporangium and forms a stable clade with its closest relative Sphaerisporangium rubeum JCM 13067T (98.2 % 16S rRNA gene sequence similarity). Moreover, morphological and chemotaxonomic properties of strain NEAU-GQTH1-3T also confirmed the affiliation of the isolate to the genus Sphaerisporangium. The cell wall contained meso-diaminopimelic acid and the whole-cell sugars were glucose, galactose, madurose, mannose and ribose. The polar lipid profile consisted of diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylmethylethanolamine, phosphatidylinositol, two phosphatidylinositol mannosides, phosphoglycolipid, an unidentified phospholipid and an unidentified glycolipid. The major menaquinones were MK-9(H4), MK-9(H6) and MK-9(H2). The predominant cellular fatty acids were iso-C16 : 0 and 10-methyl C17 : 0. Mycolic acids were absent. The DNA G+C content was 70.4 mol%. However, the low level of DNA-DNA relatedness and some phenotypic characteristics allowed the isolate to be differentiated from its closest relative. Therefore, it is concluded that strain NEAU-GQTH1-3T represents a novel species of the genus Sphaerisporangium, for which the name Sphaerisporangium aureirubrum sp. nov. is proposed. The type strain is NEAU-GQTH1-3T ( = CGMCC 4.7199T = JCM 30346T).

The identification and characterization of defect states in hybrid organic-inorganic perovskite photovoltaics.

Thin film photovoltaic cells based on hybrid halide perovskite absorbers have emerged as promising candidates for next generation photovoltaics. Here, we have characterized and identified the defect energy distribution in the CH3NH3PbI3 perovskite using admittance spectroscopy, which reveals a deep defect state ∼0.16 eV above the valence band. According to theoretical calculations, the defect state is possibly attributed to iodine interstitials (Ii), which can become the non-radiative recombination centers in the absorber.

Actinomadura jiaoheensis sp. nov. and Actinomadura sporangiiformans sp. nov., two novel actinomycetes isolated from muddy soil and emended description of the genus Actinomadura.

Two novel actinomycetes, designated strains NEAU-Jh1-3(T) and NEAU-Jh2-5(T), were isolated from muddy soil collected from a riverbank in Jiaohe, Jilin Province, north China. A polyphasic study was carried out to establish the taxonomic positions of these strains. The 16S rRNA gene sequence analysis showed that the two novel isolates exhibited 99.9 % 16S rRNA gene sequence similarity with each other and that they are closely related to Actinomadura viridis IFO 15238(T) (99.6, 99.6 %) and Actinomadura vinacea IFO 14688(T) (99.3, 99.3 %). Phylogenetic analysis based on the 16S rRNA gene sequences indicated that the two cultures clustered together and formed a cluster with A. viridis IFO 15238(T), A. vinacea IFO 14688(T) and Actinomadura rugatobispora IFO 14382(T). However, the DNA-DNA hybridization value between strains NEAU-Jh1-3(T) and NEAU-Jh2-5(T) was 63.6 %, and the values between the two strains and their close phylogenetic relatives were also below 70 %. With reference to phenotypic characteristics, phylogenetic data and DNA-DNA hybridization results, the two strains can be distinguished from each other and their close phylogenetic relatives. Thus, strains NEAU-Jh1-3(T) and NEAU-Jh2-5(T) represent two novel species of the genus Actinomadura, for which the names Actinomadura jiaoheensis sp. nov. and Actinomadura sporangiiformans sp. nov. are proposed. The type strains are NEAU-Jh1-3(T) (=CGMCC 4.7197(T) = JCM 30341(T)) and NEAU-Jh2-5(T) (=CGMCC 4.7211(T) = JCM 30342(T)), respectively.