Emissions of HCFC-22 and HCFC-142b in China during 2018-2021 Inferred from Inverse Modeling.

Hydrochlorofluorocarbons (HCFCs) are transitional substitutes for chlorofluorocarbons (CFCs). However, they still have the capacity to be ozone-depleting substances (ODSs). Therefore, they are scheduled to be phased out in China by 2030 under the Montreal Protocol. The emission estimates of HCFC-22 (CHClF2) and HCFC-142b (CH3CClF2) in China using atmospheric observations are lacking after 2017, making it hard to understand the effectiveness of the phase-out process of HCFCs in China. Here, we use flask and in situ measurements of HCFC-22 and HCFC-142b during 2018-2021 and inverse modeling to determine the emission magnitude and changes in China. It was determined that China's emissions were 172 ± 40, 154 ± 39, 160 ± 22, and 155 ± 33 Gg yr-1 of HCFC-22 and 8.3 ± 1.8, 7.8 ± 1.6, 7.4 ± 1.7, and 7.9 ± 1.7 Gg yr-1 of HCFC-142b from 2018 to 2021, respectively. Top-down estimates show that HCFC-22 emissions in China were stable, while HCFC-142b emissions were decreasing during 2013-2021, although both substances were in the stage of being phased out during 2013-2021. This study reveals that 46 and 39% of the global HCFC-22 and HCFC-142b emissions, respectively, cannot be traced to certain countries in 2020. We suggest that more studies on HCFC emissions around the world in the future are needed to better safeguard the ozone layer recovery and climate mitigation by ensuring compliance with the Montreal Protocol during HCFC phase-out processes.

Inverse Modeling Revealed Reversed Trends in HCFC-141b Emissions for China during 2018-2020.

Having the highest ozone-depleting potential among hydrochlorofluorocarbons (HCFCs), the production and consumption of HCFC-141b (1,1-dichloro-1-fluoroethane, CH3CCl2F) are controlled by the Montreal Protocol. A renewed rise in global HCFC-141b emissions was found during 2017-2020; however, the latest changes in emissions across China are unclear for this period. This study used the FLEXible PARTicle dispersion model and the Bayesian framework to quantify HCFC-141b emissions based on atmospheric measurements from more sites across China than those used in previous studies. Results show that the estimated HCFC-141b emissions during 2018-2020 were on average 19.4 (17.3-21.6) Gg year-1, which was 3.9 (0.9-7.0) Gg year-1 higher than those in 2017 (15.5 [13.4-17.6] Gg year-1), showing a renewed rise. The proportion of global emissions that could not be exactly traced in 2020 was reduced from about 70% reported in previous studies to 46% herein. This study reconciled the global emission rise of 3.0 ± 1.2 Gg year-1 (emissions in 2020 - emissions in 2017): China's HCFC-141b emissions changed by 4.3 ± 4.5 Gg year-1, and the combined emissions from North Korea, South Korea, western Japan, Australia, northwestern Europe, and the United States changed by -2.2 ± 2.6 Gg year-1, while those from other countries/regions changed by 0.9 ± 5.3 Gg year-1.

Light-Driven Reversible Hydrogen Storage in Light-Weight Metal Hydrides Enabled by Photothermal Effect.

Requiring high temperature for hydrogen storage is the main feature impeding practical application of light metal hydrides. Herein, to lift the restrictions associated with traditional electric heating, light is used as an alternative energy input, and a light-mediated catalytic strategy coupling photothermal and catalytic effects is proposed. With NaAlH4 as the initial target material, TiO2 nanoparticles uniformly distribute on carbon nanosheets (TiO2 @C), which couples the catalytic effect of TiO2 and photothermal property of C, is constructed to drive reversible hydrogen storage in NaAlH4 under light irradiation. Under the catalysis of TiO2 @C, complete hydrogen release from NaAlH4 is achieved within 7 min under a light intensity of 10 sun. Furthermore, owing to the stable catalytic and photothermal effect of TiO2 @C, NaAlH4 delivers a reversible capacity of 4 wt% after 10 cycles with a capacity retention of 85% under light irradiation only. The proposed strategy is also applicable to other light metal hydrides such as LiAlH4 and MgH2 , validating its universality. The concept of light-driven hydrogen storage provides an alternative approach to electric heating, and the light-mediated catalytic strategy proposed herein paves the way to the design of reversible high-density hydrogen storage systems that do not rely on artificial energy.

Towards biomass production and wastewater treatment by enhancing the microalgae-based nutrients recovery from liquid digestate in an innovative photobioreactor integrated with dialysis bag.

Microalgae-based nutrients recovery from liquid anaerobic digestate of swine manure has been a hotspot in recent decades. Nevertheless, in consideration of the high NH4+-N content and poor light penetrability exhibited by the original liquid digestate, uneconomical pretreatment on liquid digestate including centrifugation and dilution are indispensable before microalgae cells inoculation. Herein, aiming at eliminating the energy-intensive and freshwater-consuming pretreatment on liquid digestate and enhancing microalgae growth, the dialysis bag which permits nutrients transferring across its wall surface whereas retains almost all matters characterized by impeding light transmission within the raw liquid digestate was integrated into a column photobioreactor (DB-PBR). Consequently, light availability of microalgae cells in DB-PBR was elevated remarkably and thus contributed to a 357.58% improvement on microalgae biomass concentration in DB-PBR than the conventional PBR under 80 µmol m-2 s-1. Likewise, superior nutrients removal efficiencies from liquid digestate were obtained in DB-PBR (NH4+-N: 74.84%, TP: 63.75%) over the conventional PBR (NH4+-N: 30.27%, TP: 16.86%). Furthermore, higher microalgae biomass concentration (1.87 g L-1) and nutrients removal efficiencies (NH4+-N: 95.12%, TP: 76.87%) were achieved in the DB-PBR by increasing the light intensity to 140 µmol m-2 s-1. More importantly, the DB-PBR may provide a simple and greener solution to purify other kinds of wastewater.

Probabilistic response of a fractional-order hybrid vibration energy harvester driven by random excitation.

The stochastic response of a fractional-order hybrid vibration energy harvester is investigated in this paper. Equivalent system can be derived by the variable transformation. Then, the probability density functions of mechanical states are obtained by the stochastic averaging technique. The good agreement between numerical simulation and analytical results demonstrates the effectiveness of the proposed method. Mean square voltage, mean square current, and mean output power are presented to illustrate the device output performance. Results imply that the hybrid vibration energy harvesting system can generate higher mean output power than that from a separate piezoelectric system and an electromagnetic system.

Transcriptome profiling reveals key roles of phagosome and NOD-like receptor pathway in spotting diseased Strongylocentrotus intermedius.

Spotting disease is a common disease in the process of aquaculture and restocking of the sea urchin Strongylocentrotus intermedius and leads to mass mortality. To characterize the molecular processes and candidate genes related to spotting disease in S. intermedius, we conducted next-generation sequencing to assess the key genes/pathways in spotting diseased sea urchin (DUG) compared to healthy ones (HUG). A total of 321.1 million clean reads were obtained and assembled into 93,877 Unigenes with an N50 of 1185 bp, in which 86.48% of them matched to the genome sequence of the sea urchin S. purpuratus and 27,456 Unigenes mapped to Nr database. Salmon expression analysis revealed 1557 significantly differently expressed genes (DEGs) between DUG and HUG. These DEGs were enriched into 151 KEGG pathways including a core set of immune correlated pathways notably in phagosome and NOD-like receptor signaling. DUG displayed an obvious downregulation in these immune pathways. The expression patterns of six DEGs were confirmed by RT-qPCR, and the expressions were consistent with the results of RNA-seq. Furthermore, 15,990 SSRs were identified and a total of 235,249 and 295,567 candidate SNPs were identified from DUG and HUG, respectively. All these results provided basic information for our understanding of spotting disease outbreak in sea urchin.

The node-weighted Steiner tree approach to identify elements of cancer-related signaling pathways.

BACKGROUND: Cancer constitutes a momentous health burden in our society. Critical information on cancer may be hidden in its signaling pathways. However, even though a large amount of money has been spent on cancer research, some critical information on cancer-related signaling pathways still remains elusive. Hence, new works towards a complete understanding of cancer-related signaling pathways will greatly benefit the prevention, diagnosis, and treatment of cancer. RESULTS: We propose the node-weighted Steiner tree approach to identify important elements of cancer-related signaling pathways at the level of proteins. This new approach has advantages over previous approaches since it is fast in processing large protein-protein interaction networks. We apply this new approach to identify important elements of two well-known cancer-related signaling pathways: PI3K/Akt and MAPK. First, we generate a node-weighted protein-protein interaction network using protein and signaling pathway data. Second, we modify and use two preprocessing techniques and a state-of-the-art Steiner tree algorithm to identify a subnetwork in the generated network. Third, we propose two new metrics to select important elements from this subnetwork. On a commonly used personal computer, this new approach takes less than 2 s to identify the important elements of PI3K/Akt and MAPK signaling pathways in a large node-weighted protein-protein interaction network with 16,843 vertices and 1,736,922 edges. We further analyze and demonstrate the significance of these identified elements to cancer signal transduction by exploring previously reported experimental evidences. CONCLUSIONS: Our node-weighted Steiner tree approach is shown to be both fast and effective to identify important elements of cancer-related signaling pathways. Furthermore, it may provide new perspectives into the identification of signaling pathways for other human diseases.

Asymmetrical responses of skin blood flow in ischemic hindlimbs to electrical stimulation of the unilateral forelimb.

The regulation of skin blood flow (SBF) is primarily mediated by the sympathetic nervous system, but the effects of electrical stimulation (ES) of one limb on SBF in the other limbs remain unknown. The present study investigated the effects of unilateral forelimb ES on SBF in the bilateral hindlimbs in anesthetized rats. Bilateral hindlimb ischemia was induced by tourniquet application for 60min. After reperfusion for 24h, ES (3 or 125Hz) was applied to the upper one-fourth of the triceps brachii muscle of the left or right forelimb for 30min. Rats that did not receive ES were used as the controls. Bilateral hindlimb SBF was measured by a laser Doppler line scanner for 20min before ES, 30min during ES, and 9min after ES. The results showed significant differences in SBF in the right but not left hindlimb between the control group and experimental group that received 125-Hz ES of the right forelimb. Right hindlimb SBF significantly increased within 3min following the application of 125-Hz ES to the right forelimb. No significant changes in SBF were observed in the left or right hindlimb when 125-Hz ES was applied to the left forelimb. Moreover, 3-Hz ES of the left or right forelimb did not significantly change SBF in either hindlimb compared with the control group. These results indicate that unilateral forelimb ES causes a differential SBF response in the hindlimb via a specific somatosympathetic reflex, and ES-induced SBF improvements in the ischemic hindlimb are frequency-dependent.

[Association of health literacy with health management among diabetics].

OBJECTIVE: To understand status of health literacy among diabetics and their health management behaviors, and analyze the relationship of health literacy and health management. METHODS: A two-staged cluster randomized sampling method was used to investigate 1 130 diabetics in Beijing, Ningbo and Xiamen from October to November in 2012. All participants should be diagnosed by primary hospital and above and have lived in the community over six months. Diabetic patients who indicated that they had severely impaired vision or cognitive disorder, or had severe physical deterioration, or did not live in the address provided were excluded. A total of 1 130 questionnaires were sent out and 1 083 eligible questionnaires were taken back, accounting for 96.87%. Multivariate logistic regression was adopted to analyze the association between health literacy and health management behaviors and blood glucose level. RESULTS: Among those participants, 47.7% (517) were men, 52.3% (566) were women, the age was (67.0 ± 9.5). According to diabetes health literacy scores, 73.7% (798/1 083) of them were classified as poor health literacy and 26.1% (283/1 083) as essential health literacy. Health literacy was associated with health management behaviors independently, demonstrating that the probability of utilizing health education, free physical examination, lifestyle guidance, monitoring blood glucose on their own, measuring blood glucose more than once a week and taking hypoglycemic agent regularly among diabetics with essential health literacy were 1.40 (95%CI:1.03-1.91), 1.65 (95%CI: 1.19-2.28), 2.70 (95%CI:1.98-3.69), 2.05 (95%CI:1.34-3.15), 2.56 (95%CI:1.85-3.56) , 1.48 (95%CI:1.07-2.06) times of those in diabetics with poor health literacy (P < 0.05). CONCLUSION: Health literacy may affect health management behaviors among diabetics. More activities targeted on diabetics with low health literacy were suggested to improve their' health literacy and their skills about diabetes mellitus management.

Cervical vertigo due to rotational fixation of atlantoaxial joint combined with benign paroxysmal positional vertigo: A case report and literature review.

INTRODUCTION: Vertigo is the most common clinical complaint, misdiagnosed patients are not rare, so it is very important to exclude and identify vertigo. For vertigo caused by multiple causes, including cervical vertigo with atlantoaxial rotation fixation combined with benign paroxysmal positional vertigo (BPPV), tuina can correct joint misalignment. The reduction technique will return the fallen otolith to the correct position. The use of massage and reduction can improve clinical symptoms and improve quality of life and may be a simple, safe, and effective treatment strategy for this disease. PATIENT CONCERNS: We report on a patient with both cervical vertigo due to atlantoaxial rotational fixation and BPPV, including his imaging examination, clinical manifestations, and treatment methods. DIAGNOSIS: Cervical vertigo (atlantoaxial rotatory fixation) and BPPV. INTERVENTION: Tuina combined with atlantoaxial directional inverted reduction technique and reduction manipulation. OUTCOMES: The patient's vertigo symptoms improved significantly, nystagmus disappeared, cervical occipital pain, nausea, head distension, and other symptoms disappeared, and cervical motion rotation reached 60°. CONCLUSION: This study proved the effectiveness of massage combined with a reduction in the treatment of cervical vertigo and BPPV, as well as the importance of vertigo diagnosis and differential diagnosis, and provided a new treatment idea for the future diagnosis and treatment of vertigo caused by a variety of causes.

Assessment of the osteogenic effect after maxillary sinus floor elevation and simultaneous implantation with or without bone grafts by analyzing trabecular bone parameters: a retrospective study.

OBJECTIVE: The aim of this population-based retrospective study was to compare the osteogenic effect of newly formed bone after maxillary sinus floor elevation (MSFE) and simultaneous implantation with or without bone grafts by quantitatively analyzing trabecular bone parameters. METHODOLOGY: A total of 100 patients with missing posterior maxillary teeth who required MSFE and implantation were included in this study. Patients were divided into two groups: the non-graft group (n=50) and the graft group (n=50). Radiographic parameters were measured using cone beam computed tomography (CBCT), and the quality of newly formed bone was analyzed by assessing trabecular bone parameters using CTAn (CTAnalyzer, SkyScan, Antwerp, Belgium) software. RESULTS: In the selected regions of interest, the non-graft group showed greater bone volume/total volume (BV/TV), bone surface/total volume (BS/TV), trabecular number (Tb. N), and trabecular thickness (Tb. Th) than the graft group (p<0.001). The non-graft group showed lower trabecular separation (Tb. Sp) than the graft group (p<0.001). The incidence of perforation and bleeding was higher in the graft group than in the non-graft group (p<0.001), but infection did not significantly differ between groups (p>0.05). Compared to the graft group, the non-graft group showed lower postoperative bone height, gained bone height and apical bone height (p<0.001). CONCLUSION: MSFE with and without bone grafts can significantly improve bone formation. In MSFE, the use of bone grafts hinders the formation of good quality bone, whereas the absence of bone grafts can generate good bone quality and limited bone mass.

Atomic reconstruction for realizing stable solar-driven reversible hydrogen storage of magnesium hydride.

Reversible solid-state hydrogen storage of magnesium hydride, traditionally driven by external heating, is constrained by massive energy input and low systematic energy density. Herein, a single phase of Mg2Ni(Cu) alloy is designed via atomic reconstruction to achieve the ideal integration of photothermal and catalytic effects for stable solar-driven hydrogen storage of MgH2. With the intra/inter-band transitions of Mg2Ni(Cu) and its hydrogenated state, over 85% absorption in the entire spectrum is achieved, resulting in the temperature up to 261.8 °C under 2.6 W cm-2. Moreover, the hydrogen storage reaction of Mg2Ni(Cu) is thermodynamically and kinetically favored, and the imbalanced distribution of the light-induced hot electrons within CuNi and Mg2Ni(Cu) facilitates the weakening of Mg-H bonds of MgH2, enhancing the "hydrogen pump" effect of Mg2Ni(Cu)/Mg2Ni(Cu)H4. The reversible generation of Mg2Ni(Cu) upon repeated dehydrogenation process enables the continuous integration of photothermal and catalytic roles stably, ensuring the direct action of localized heat on the catalytic sites without any heat loss, thereby achieving a 6.1 wt.% H2 reversible capacity with 95% retention under 3.5 W cm-2.

CCl4 emissions in eastern China during 2021-2022 and exploration of potential new sources.

According to the Montreal Protocol, the production and consumption of ozone-layer-depleting CCl4 for dispersive applications was globally phased out by 2010, including China. However, continued CCl4 emissions were disclosed, with the latest CCl4 emissions unknown in eastern China. In the current study, based on the atmospheric measurements of ~12,000 air samples taken at two sites in eastern China, the 2021-2022 CCl4 emissions are quantified as 7.6 ± 1.7 gigagrams per year. This finding indicates that CCl4 emissions continued after being phased out for dispersive uses in 2010. Subsequently, our study identifies potential industrial sources (manufacture of general purpose machinery and manufacture of raw chemical materials, and chemical products) of CCl4 emissions.

Effects of surface roughness on optical properties and sensitivity of fiber-optic evanescent wave sensors.

The effects of surface roughness on the light transmission properties and sensitivity of fiber-optic evanescent wave sensors are investigated. A simple method of increasing the sensitivity based on the surface roughness (pit depth δ and diameter Δ) and incident angle U(i) of light rays on the fiber input end is proposed. We discovered that as 2δ/Δ increases, the transmitted light intensity decreases, but the sensitivity initially increases and then decreases. In sensors containing fibers of various roughnesses, the sensitivity to glucose solutions reached -11.7 mW/riu at 2δ/Δ=0.32 and increased further to -15.3 mW/riu with proper adjustment of U(i).

[Impact of baseline pulse pressure on new-onset cardio-and cerebrovascular events in diabetic population].

OBJECTIVE: To observe the association between baseline pulse pressure (PP) level and new-onset cardio-cerebrovascular events in diabetic population. METHODS: Physical examination data between July 2006 to October 2007 from a total of 101 510 employees of Kailuan Group were reviewed, 8306 subjects with a fasting plasma glucose level of ≥ 7.0 mmol/L or with confirmed diabetes diagnosis and were enrolled in this prospective cohort study. Subjects were followed up for 38-53 (48.1 ± 3.1) months and the cardio-cerebrovascular events were obtained every six months, association between baseline PP and new-onset cardio-cerebrovascular events in the diabetic population were analyzed. RESULTS: (1) Incidences of total cardio-cerebrovascular events in the PP groups were 3.4%, 2.8%, 4.5%, 6.4%, respectively. Incidences of cerebral infarction events and myocardial infarction were 2.1%, 1.6%, 2.9%, 3.9% and 1.1%, 0.7%, 1.0%, 1.7%, respectively. (2) Multivariate Cox's proportional hazards regression analysis indicated that baseline PP group was the risk factor for total cardio-cerebrovascular events, cerebral infarction events and myocardial infarction, and the risk for all the events of the PP ≥ 60 mm Hg (1 mm Hg = 0.133 kPa) group was increasing. The values of RR(95%CI) were 1.88 (95%CI 1.34-2.65, P < 0.01), 1.92 (95%CI 1.23-2.99, P < 0.01) and 1.52 (95%CI 0.82-2.81, P > 0.05) after adjust the other factors.(3) In line with increasing level of baseline PP, age, BMI, SBP, DBP, HDL-C, and hs-CRP levels significantly increased in this diabetic population (P < 0.01 or P < 0.05). CONCLUSION: The level of high baseline PP is a risk factor for new-onset cardio-cerebrovascular events in diabetic population.

Optimization of X-axis servo drive performance using PSO fuzzy control technique for double-axis dicing saw.

The dicing saw is a critical piece of equipment in IC processing, primarily used to cut wafers. Due to the high spindle speed, even small errors in the cutting process can result in wafer chipping or cracking. Therefore, the dicing saw requires a high degree of accuracy and stability. In this paper, the accuracy of the X-axis servo response was simulated using an Israeli ADT-8230 dual-axis abrasive wheel dicing saw. The study introduces a novel approach by using a fuzzy controller instead of the traditional position loop proportional integral (PI) controller. In addition, a two-input, two-output fuzzy rule is used for on-line correction of the position loop PI parameters. A heuristic algorithm is used to optimise the position loop fuzzy controller parameters. The quantization and proportionality factors are rectified using Particle Swarm Optimisation (PSO) algorithm and Genetic Algorithm (GA) respectively. By comparing the performance of the PSO fuzzy and GA fuzzy controllers, the optimal control method is derived. The proposed method is validated by simulation in the MATLAB/Simulink development environment using real ADT-8230 servo data. Experimental results show that the PSO-fuzzy structured controller reduces the position control error by 11.8%, improves the tracking performance by 26% and reduces the torque pulsation by 23%. Therefore, in future research, more advanced search algorithms should be further combined to improve the servo accuracy of the dicing saw.

Nano-hydroxyapatite/carbon nanotube: An excellent anode modifying material for improving the power output and diclofenac sodium removal of microbial fuel cells.

Anode material and surface properties have a crucial impact on the performance of MFCs. Designing and fabricating various modified carbon-based anodes with functional materials is an effective strategy to improve anode performance in MFCs. Anode materials with excellent bioaffinity can promote bacterial attachment, growth, and extracellular electron transfer. In this study, positively charged nano hydroxyapatite (nHA) with remarkable biocompatibility combined with carbon nanotubes (CNTs) with unique structure and high conductivity were used as anode modifying material. The nHA/CNTs modified carbon brush (CB) exhibited improved bacteria adsorption capacity, electrochemical activity and reticular porous structure, thus providing abundant sites and biocompatible microenvironment for the attachment and growth of functional microbial and accelerating extracellular electron transfer. Consequently, the nHA/CNTs/CB-MFCs achieved the maximum power density of 4.50 ± 0.23 mW m-2, which was 1.93 times higher than that of the CB-MFCs. Furthermore, diclofenac sodium (DS), which is a widely used anti-inflammatory drug and is also a persistent toxic organic pollutant constituting a serious threat to public health, was used as the model organic pollutant. After 322 days of long-term operation, enhanced diclofenac sodium removal efficiency and simultaneous bioelectricity generation were realized in nHA/CNTs/CB-MFCs, benefiting from the mature biofilm and the diverse functional microorganisms revealed by microbial community analysis. The nHA/CNTs/CB anode with outstanding bioaffinity, electrochemical activity and porous structure presents great potential for the fabrication of high-performance anodes in MFCs.

Solar-Driven Reversible Hydrogen Storage.

The lack of safe and efficient hydrogen storage is a major bottleneck for large-scale application of hydrogen energy. Reversible hydrogen storage of light-weight metal hydrides with high theoretical gravimetric and volumetric hydrogen density is one ideal solution but requires extremely high operating temperature with large energy input. Herein, taking MgH2 as an example, a concept is demonstrated to achieve solar-driven reversible hydrogen storage of metal hydrides via coupling the photothermal effect and catalytic role of Cu nanoparticles uniformly distributed on the surface of MXene nanosheets (Cu@MXene). The photothermal effect of Cu@MXene, coupled with the "heat isolator" role of MgH2 indued by its poor thermal conductivity, effectively elevates the temperature of MgH2 upon solar irradiation. The "hydrogen pump" effect of Ti and TiHx species that are in situ formed on the surface of MXene from the reduction of MgH2 , on the other hand, plays a catalytic role in effectively alleviating the kinetic barrier and hence decreasing the operating temperature required for reversible hydrogen adsorption and desorption of MgH2 . Based on the combination of photothermal and catalytic effect of Cu@MXene, a reversible hydrogen storage capacity of 5.9 wt% is achieved for MgH2 after 30 cycles using solar irradiation as the only energy source.

Current Achievements and Future Prospects in Virus Elimination Technology for Functional Chrysanthemum.

Chrysanthemum is an important functional plant that is used for food, medicine and tea. Functional chrysanthemums become infected with viruses all around the world, seriously lowering their quality and yield. Viral infection has become an important limiting factor in chrysanthemum production. Functional chrysanthemum is often propagated asexually by cutting during production, and viral infection of seedlings is becoming increasingly serious. Chrysanthemums can be infected by a variety of viruses causing different symptoms. With the development of biotechnology, virus detection and virus-free technologies for chrysanthemum seedlings are becoming increasingly effective. In this study, the common virus species, virus detection methods and virus-free technology of chrysanthemum infection are reviewed to provide a theoretical basis for virus prevention, treatment and elimination in functional chrysanthemum.

Research advance on cold tolerance in chrysanthemum.

Chrysanthemums are one of the top ten most well-known traditional famous flowers in China and one of the top four cut flowers worldwide, holding a significant position in landscape gardening. The cold temperatures of winter restrict the cultivation, introduction, and application of chrysanthemum, resulting in high costs for year-round production. This severely impacts the ornamental and economic value of chrysanthemum. Therefore, research on cold tolerance is of vital importance for guiding chrysanthemum production and application. With the development of genomics, transcriptomics, metabolomics, and other omics approaches, along with high-throughput molecular marker technologies, research on chrysanthemum cold tolerance has been continuously advancing. This article provides a comprehensive overview of the progress in cold tolerance research from various aspects, including chrysanthemum phenotype, physiological mechanisms, the forward genetics, molecular mechanisms, and breeding. The aim is to offer insights into the mechanisms of cold tolerance in chrysanthemum and provide reference for in-depth research and the development of new cold tolerance chrysanthemum varieties.