Electronic Structure Regulated Nickel-Cobalt Bimetal Phosphide Nanoneedles for Efficient Overall Water Splitting.

Transition metal phosphides (TMPs) have been widely studied for water decomposition for their monocatalytic property for anodic or cathodic reactions. However, their bifunctional catalytic activity still remains a major challenge. Herein, hexagonal nickel-cobalt bimetallic phosphide nanoneedles with 1-3 µm length and 15-30 nm diameter supported on NF (NixCo2-xP NDs/NF) with adjusted electron structure have been successfully prepared. The overall alkaline water electrolyzer composed of the optimal anode (Ni0.67Co1.33P NDs/NF) and cathode (Ni1.01Co0.99P NDs/NF) provide 100 mA cm-2 at 1.62 V. Gibbs Free Energy for reaction paths proves that the active site in the hydrogen evolution reaction (HER) is Ni and the oxygen evolution reaction (OER) is Co in NixCo2-xP, respectively. In the HER process, Co-doping can result in an apparent accumulation of charge around Ni active sites in favor of promoting HER activity of Ni sites, and ΔGH* of 0.19 eV is achieved. In the OER process, the abundant electron transfer around Co-active sites results in the excellent ability to adsorb and desorb *O and *OOH intermediates and an effectively reduced ∆GRDS of 0.37 eV. This research explains the regulation of electronic structure change on the active sites of bimetallic materials and provides an effective way to design a stable and effective electrocatalytic decomposition of alkaline water.

Prevalence and factors associated with anxiety and depression among community-dwelling older adults in Hunan, China: a cross-sectional study.

BACKGROUND: Older adults' psychological health is a public health issue that cannot be ignored, especially when these psychological health problems and related factors change across different social backgrounds because of rapid changes in traditions and family structures and the epidemic responses after the outbreak of COVID-19 in China. The aim of our study is to determine the prevalence of anxiety and depression and their associated factors among community-dwelling older adults in China. METHODS: A cross-sectional study was conducted from March to May 2021 with 1173 participants aged 65 years or above from three communities in Hunan Province, China who were selected using convenience sampling. A structured questionnaire including sociodemographic characteristics, clinical characteristics, the Social Support Rating Scale (SSRS), the 7-Item Generalized Anxiety Disorder scale (GAD-7), and the Patient Health Questionnaire-9 Item (PHQ-9) was used to collect relevant demographic and clinical data and to measure social support status, anxiety symptoms, and depressive symptoms, respectively. Bivariate analyses were conducted to explore the difference in anxiety and depression based on samples' different characteristics. The multivariable logistic regression analysis was performed to test for significant predictors of anxiety and depression. RESULTS: The prevalence of anxiety and depression were 32.74% and 37.34%, respectively. Multivariable logistic regression analysis revealed that being female, being unemployed before retirement age, lacking physical activity, having physical pain, and having three or more comorbidities were significant predictors for anxiety. Subjective social support and support utilization were significant protective factors. Regarding depression, religion, lacking physical activity, having physical pain, having three or more comorbidities were found to be significant predictors. Support utilization was a significant protective factor. CONCLUSIONS: The study group showed a high prevalence of anxiety and depression. Gender, employment status, physical activity, physical pain, comorbidities, and social support were associated with psychological health problems of older adults. These findings suggest that governments should focus on the psychological health problems of older adults by raising community awareness of issues related to older adults' psychological health. They should also screen for anxiety and depression among high-risk groups and encourage individuals to seek supportive counseling.

Biotransformation of the saponins in Panax notoginseng leaves mediated by gut microbiota from insomniac patients.

Saponins extracted from Panax notoginseng leaves by methanol or water could be orally administrated for insomnia with very low bioavailability, which might be bio-converted by gut microbiota to generate potential bioactive products. Moreover, gut microbiota profiles from insomniac patients are very different from healthy subjects. We aimed to compare the metabolic characteristics and profiles of the two saponins extract by incubation with gut microbiota from insomniac patients. The ginsenosides, notoginsenosides, and metabolites were identified and relatively quantified by high-performance liquid chromatography-tandem mass spectrometry. Gut microbiota was profiled by 16S ribosomal RNA gene sequencing. The results showed that saponins were very different between methanol or water extract groups, which were metabolized by gut microbiota to generate similar yields. The main metabolites included ginsenoside Rd, ginsenoside F2 , ginsenoside C-Mc or ginsenoside C-Y, ginsenoside C-Mx, ginsenoside compound K, and protopanaxadiol in both groups, while gypenoside XVII, notoginsenoside Fe, ginsenoside Rd2 , and notoginsenoside Fd were the intermediates in the methanol group. Moreover, the microbial, Faecalibacterium prausnitzi, could bio-convert the saponins to obtain the corresponding metabolites. Our study implied that saponins extracted from P. notoginseng leaves by methanol or water could be used for insomniac patients due to gut microbiota biotransformation.

Backscattering enhancements by partially exposed spheres due to reflected subsonic Rayleigh waves at air-water interfaces.

Air-water interfaces can enable distinct target scattering mechanisms different from the mechanism under free field conditions. In this study, backscattering experiments are performed by lowering an acrylic or polymethylmethacrylate sphere through the air-water interface into the water and insonifying the sphere from below at grazing incidence. Pronounced backscattering enhancements associated with the subsonic Rayleigh wave propagation mechanism are observed before the specular reflection point of the sphere reaches the water. The results indicate that, for a partially exposed sphere, subsonic Rayleigh waves can pass through the air-water interface and circumnavigate the sphere multiple times. The phase velocities of Rayleigh waves are different when propagating above and below the air-water interface. Moreover, subsonic Rayleigh waves are partially reflected when passing through the air-water interface, generating wavefronts that propagate in the reverse direction.

Psychosocial crisis intervention for coronavirus disease 2019 patients and healthcare workers. / æ–°åž‹å† çŠ¶ç— æ¯’è‚ºç‚Žæ‚£è€ å’ŒåŒ»åŠ¡äººå‘˜çš„å¿ƒç†ç¤¾ä¼šå±æœºå¹²é¢„ï¼ˆè‹±æ–‡ï¼‰.

OBJECTIVES: Shelter hospital was an alternative way to provide large-scale medical isolation and treatment for people with mild coronavirus disease 2019 (COVID-19). Due to various reasons, patients admitted to the large shelter hospital was reported high level of psychological distress, so did the healthcare workers. This study aims to introduce a comprehensive and multifaceted psychosocial crisis intervention model. METHODS: The psychosocial crisis intervention model was provided to 200 patients and 240 healthcare workers in Wuhan Wuchang shelter hospital. Patient volunteers and organized peer support, client-centered culturally sensitive supportive care, timely delivery of scientific information about COVID-19 and its complications, mental health knowledge acquisition of non-psychiatric healthcare workers, group activities, counseling and education, virtualization of psychological intervention, consultation and liaison were exhibited respectively in the model. Pre-service survey was done in 38 patients and 49 healthcare workers using the Generalized Anxiety Disorder 7-item (GAD-7) scale, the Patient Health Questionnaire 2-item (PHQ-2) scale, and the Primary Care PTSD screen for the Diagnostic and Statistical Manual of Mental Disorders, 5th edition (PC-PTSD-5). Forty-eight healthcare workers gave feedback after the intervention. RESULTS: The psychosocial crisis intervention model was successfully implemented by 10 mental health professionals and was well-accepted by both patients and healthcare workers in the shelter hospital. In pre-service survey, 15.8% of 38 patients were with anxiety, 55.3% were with stress, and 15.8% were with depression; 16.3% of 49 healthcare workers were with anxiety, 26.5% were with stress, and 22.4% were with depression. In post-service survey, 62.5% of 48 healthcare workers thought it was very practical, 37.5% thought more practical; 37.5% of them thought it was very helpful to relief anxiety and insomnia, and 27.1% thought much helpful; 37.5% of them thought it was very helpful to recognize patients with anxiety and insomnia, and 29.2% thought much helpful; 35.4% of them thought it was very helpful to deal with patients' anxiety and insomnia, and 37.5% thought much helpful. CONCLUSIONS: Psychological crisis intervention is feasible, acceptable, and associated with positive outcomes. Future tastings of this model in larger population and different settings are warranted.

Full color 3D printing of anatomical models.

We propose an effective method for manufacturing human anatomical specimens in response to the shortage of cadaver specimens and the poor simulation results of anatomical specimen substitutes. Digital human data with high precision were used to create digital models and corresponding mapped textures. Different materials were chosen to print the digital models with full-color and multimaterial 3D-printing technology based on the histological characteristics of the anatomical structures. Anatomy experts and surgeons were then invited to compare the 3D printed models with authentic anatomical specimens in terms of morphological appearance, anatomical detail, and textural properties. The skull, brain, hand muscles, blood vessels and nerves of the hand, and the deep structure of the head and face were printed. The skull model used hard material, and the brain and hand muscles models used flexible and hard materials combined. The blood vessels, nerves of the hand, and the superficial and deep structure of the head and face used transparent materials, revealing the small vessels and nerves in the interior. In all the models, there were no significant differences from anatomical specimens in morphological appearance and anatomical detail. They also affected vision and touch in the same way as authentic specimens in the textural properties of color, roughness, smoothness, and fineness. Full-color and multi-material 3D printed anatomical models have the same visual and tactile properties as anatomical specimens and could serve to complement or supplement them in anatomy teaching to compensate for the shortage of cadavers.

Design of Robust, Lithiophilic, and Flexible Inorganic-Polymer Protective Layer by Separator Engineering Enables Dendrite-Free Lithium Metal Batteries with LiNi0.8 Mn0.1 Co0.1 O2 Cathode.

As a promising candidate for the high energy density cells, the practical application of lithium-metal batteries (LMBs) is still extremely hindered by the uncontrolled growth of lithium (Li) dendrites. Herein, a facile strategy is developed that enables dendrite-free Li deposition by coating highly-lithiophilic amorphous SiO microparticles combined with high-binding polyacrylate acid (SiO@PAA) on polyethylene separators. A lithiated SiO and PAA (lithiated-SiO/PAA) protective layer with synergistic flexible and robust features is formed on the Li metal anode via the in situ reaction to offer outstanding interfacial stability during long-term cycles. By suppressing the formation of dead Li and random Li deposition, reducing the side reaction, and buffering the volume changes during the lithium deposition and dissolution, such a protective layer realizes a dendrite-free morphology of Li metal anode. Furthermore, sufficient ionic conductivity, uniform lithium-ion flux, and interface adaptability is guaranteed by the lithiated-SiO and Li polyacrylate acid. As a result, Li metal anodes display significantly enhanced cycling stability and coulombic efficiency in Li||Li and Cu||Li cells. When the composite separator is applied in a full cell with a carbonate-based electrolyte and LiNi0.8 Mn0.1 Co0.1 O2 cathode, it exhibits three times longer lifespan than control cell at current density of 5 C.

Interactive three-dimensional teaching models of the female and male pelvic floor.

Controversies regarding structure and function of the pelvic floor persist because of its poor accessibility and complex anatomical architecture. Most data are based on dissection. This "surgical" approach requires profound prior knowledge, because applying the scalpel precludes a "second look." The "sectional" approach does not entail these limitations, but requires segmentation of structures and three-dimensional reconstruction. This approach has produced several "Visible Human Projects." We dealt with limited spatial resolution and difficult-to-segment structures by proceeding from clear-cut to more fuzzy boundaries and comparing segmentation between investigators. We observed that the bicipital levator ani muscle consisted of pubovisceral and puborectal portions; that the pubovisceral muscle formed, together with rectococcygeal and rectoperineal muscles, a rectal diaphragm; that the external anal sphincter consisted of its subcutaneous portion and the puborectal muscle only; that the striated urethral sphincter had three parts, of which the middle (urethral compressor) was best developed in females and the circular lower ("membranous") best in males; that the rectourethral muscle, an anterior extension of the rectal longitudinal smooth muscle, developed a fibrous node in its center (perineal body); that the perineal body was much better developed in females than males, so that the rectourethral subdivision into posterior rectoperineal and anterior deep perineal muscles was more obvious in females; that the superficial transverse perineal muscle attached to the fibrous septa of the ischioanal fat; and that the uterosacral ligaments and mesorectal fascia colocalized. To facilitate comprehension of the modified topography we provide interactive 3D-PDFs that are freely available for teaching purposes. Clin. Anat. 33:275-285, 2020. © 2019 Wiley Periodicals, Inc.

Application of three-dimensional reconstruction and printing as an elective course for undergraduate medical students: an exploratory trial.

BACKGROUND: Medical three-dimensional (3D) digital reconstruction and printing have become common tools in medicine, but few undergraduate medical students understand its whole process and teaching and clinical application. Therefore, we designed an elective course of 3D reconstruction and printing for students and studied its significance and practicability. METHODS: Thirty undergraduate medical students in their second-year of study volunteered to participate in the course. The course started with three lessons on the theory of 3D digital reconstruction and printing in medicine. The students were then randomly divided into ten groups. Each group randomly selected its own original data set, which could contain a series of 2D images including sectional anatomical images, histological images, CT and MRI. Amira software was used to segment the structures of interest, to 3D reconstruct them and to smooth and simplify the models. These models were 3D printed and post-processed. Finally, the 3D digital and printed models were scored, and the students produced brief reports of their work and knowledge acquisition and filled out an anonymous questionnaire about their study perceptions. RESULTS: All the students finished this course. The average score of the 30 students was 83.1 ± 2.7. This course stimulated the students' learning interest and satisfied them. It was helpful for undergraduate students to understand anatomical structures and their spatial relationship more deeply. Students understood the whole process of 3D reconstruction and printing and its teaching and clinical applications through this course. CONCLUSION: It is significant and necessary to develop this course for undergraduate medical students.

[Psychological characteristics in different clinical subgroups of insomniacs].

OBJECTIVE: To investigate psychological characteristics in different clinical subgroups of insomniacs, and to provide the basis for the accurate simplification of cognitive behavioral therapy for insomnia.
 Methods: A total of 212 insomniacs from November 2014 to June 2017 in Clinical Psychology Department or Sleep Department of 2 general hospitals in Hunan Province were included in convenient and classified into sleep onset insomnia (SOI), difficulty maintaining insomnia (DMI), early morning awakening insomnia (EMAI), and combined insomnia (CI) subgroups. Ford Insomnia Response to Stress Test (FIRST), Simplified Coping Style Questionnaire (SCSQ), Dysfunctional Beliefs and Attitudes about Sleep Scale 16 version (DBAS-16), Sleep-Related Behavior Questionnaire (SRBQ), Pre-sleep Arousal Scale (PSAS), Center for Epidemiological Studies Depression Scale (CES-D), Beck Anxiety Inventory (BAI) were used to investigate the psychological characteristics.
 Results: SOI and CI insomniacs had a higher frequency in use of sleep-related behavior than those with DMI; CI had a higher frequency in use of sleep-related behavior than those with EMAI (all P<0.05). Both SOI and CI insomniacs had a higher level of pre-sleep cognitive arousal than DMI and EMAI (all P<0.05). CI insomniacs noticed more consequences of insomnia and had more worries on insomnia than DMI, and CI insomniacs had more expectations of sleep than SOI (all P<0.05).
 Conclusion: Insomniacs with different clinical subgroups have different features of psychological characteristics. Both the insomnia subgroups and the psychological characteristics should be taken into account when we simplify cognitive behavioral therapy for insomnia (CBT-I) precisely.

Architecture of structures in the urogenital triangle of young adult males; comparison with females.

The fibro-muscular architecture of the urogenital triangle remains contentious. Reasons are small size of the constituting structures and poor visibility with most imaging methods. We reinvestigated the area in serial sections of three males (21-38 years old) of the American and Chinese Visible Human Projects and two 26-week-old male fetuses, and compared the findings with earlier observations in females. The mass of the levator ani muscle was approximately twofold smaller and its funnel shape steeper in males than females. In the levator hiatus, a strand of the smooth longitudinal muscle layer of the rectum, the 'rectourethral (RU) muscle', extended anteriorly from the anorectal bend to the penile bulb. Fibrous tissue that formed in the inferior reach of the fetal RU muscle identified the location of the developing perineal body (PB) and divided the muscle into posterior 'rectoperineal' and anterior 'deep perineal' portions. In males, the PB remained small and bipartite, so that the RU muscle presented as an undivided midline structure. The well-developed female PB, instead, intertwined with the deep perineal muscle and both structures passed the vagina bilaterally to form the perineal membrane in the posterior portion of the urogenital triangle. The urethral rhabdosphincter extended in the anterior portion of the urogenital triangle between the penile bulb inferiorly and the bladder neck superiorly, and consisted of a well-developed circular 'membranous' portion with bilateral posteroinferior 'wings' and a thinner 'prostatic' portion on the prostate anterior side. In men, muscles occupy the urogenital triangle, but additional tightening of the locally fibrous adipose tissue by the superficial transverse perineal muscle appears necessary to generate functional support in women. An interactive 3D pdf file with these anatomical details (available online) should allow more accurate interpretation of ultrasound, computed tomography and magnetic resonance images.

Deformable torso phantoms of Chinese adults for personalized anatomy modelling.

In recent years, there has been increasing demand for personalized anatomy modelling for medical and industrial applications, such as ergonomics device development, clinical radiological exposure simulation, biomechanics analysis, and 3D animation character design. In this study, we constructed deformable torso phantoms that can be deformed to match the personal anatomy of Chinese male and female adults. The phantoms were created based on a training set of 79 trunk computed tomography (CT) images (41 males and 38 females) from normal Chinese subjects. Major torso organs were segmented from the CT images, and the statistical shape model (SSM) approach was used to learn the inter-subject anatomical variations. To match the personal anatomy, the phantoms were registered to individual body surface scans or medical images using the active shape model method. The constructed SSM demonstrated anatomical variations in body height, fat quantity, respiratory status, organ geometry, male muscle size, and female breast size. The masses of the deformed phantom organs were consistent with Chinese population organ mass ranges. To validate the performance of personal anatomy modelling, the phantoms were registered to the body surface scan and CT images. The registration accuracy measured from 22 test CT images showed a median Dice coefficient over 0.85, a median volume recovery coefficient (RCvlm ) between 0.85 and 1.1, and a median averaged surface distance (ASD) < 1.5 mm. We hope these phantoms can serve as computational tools for personalized anatomy modelling for the research community.

Multi-object Model-Based Multi-atlas Segmentation Constrained Grid Cut for Automatic Segmentation of Lumbar Vertebrae from CT Images.

In this chapter, we present a multi-object model-based multi-atlas segmentation constrained grid cut method for automatic segmentation of lumbar vertebrae from a given lumbar spinal CT image. More specifically, our automatic lumbar vertebrae segmentation method consists of two steps: affine atlas-target registration-based label fusion and bone-sheetness assisted multi-label grid cut which has the inherent advantage of automatic separation of the five lumbar vertebrae from each other. We evaluate our method on 21 clinical lumbar spinal CT images with the associated manual segmentation and conduct a leave-one-out study. Our method achieved an average Dice coefficient of 93.9 ± 1.0% and an average symmetric surface distance of 0.41 ± 0.08 mm.

Galfenol Thin Films and Nanowires.

Galfenol (Fe1-xGax, 10 < x < 40) may be the only smart material that can be made by electrochemical deposition which enables thick film and nanowire structures. This article reviews the deposition, characterization, and applications of Galfenol thin films and nanowires. Galfenol films have been made by sputter deposition as well as by electrochemical deposition, which can be difficult due to the insolubility of gallium. However, a stable process has been developed, using citrate complexing, a rotating disk electrode, Cu seed layers, and pulsed deposition. Galfenol thin films and nanowires have been characterized for crystal structures and magnetostriction both by our group and by collaborators. Films and nanowires have been shown to be largely polycrystalline, with magnetostrictions that are on the same order of magnitude as textured bulk Galfenol. Electrodeposited Galfenol films were made with epitaxial texture on GaAs. Galfenol nanowires have been made by electrodeposition into anodic aluminum oxide templates using similar parameters defined for films. Segmented nanowires of Galfenol/Cu have been made to provide engineered magnetic properties. Applications of Galfenol and other magnetic nanowires include microfluidic sensors, magnetic separation, cellular radio-frequency identification (RFID) tags, magnetic resonance imaging (MRI) contrast, and hyperthermia.

Architectural differences in the anterior and middle compartments of the pelvic floor of young-adult and postmenopausal females.

The pelvic floor guards the passage of the pelvic organs to the exterior. The near-epidemic prevalence of incontinence in women continues to generate interest in the functional anatomy of the pelvic floor. However, due to its complex architecture and poor accessibility, the classical 'dissectional' approach has been unable to come up with a satisfactory description, so that many aspects of its anatomy continue to raise debate. For this reason, we opted for a 'sectional' approach, using the Chinese Visible Human project (four females, 21-35 years) and the Visible Human Project (USA; one female, 59 years) datasets to investigate age-related changes in the architecture of the anterior and middle compartments of the pelvic floor. The puborectal component of the levator ani muscle defined the levator hiatus boundary. The urethral sphincter complex consisted of a circular proximal portion (urethral sphincter proper), a sling that passed on the vaginal wall laterally to attach to the puborectal muscle (urethral compressor), and a circular portion that surrounded the distal urethra and vagina (urethrovaginal sphincter). The exclusive attachment of the urethral sphincter to soft tissues implies dependence on pelvic-floor integrity for optimal function. The vagina was circular at the introitus and gradually flattened between bladder and rectum. Well-developed fibrous tissue connected the inferior vaginal wall with urethra, rectum and pelvic floor. With eight-muscle insertions, the perineal body was a strong, irregular fibrous node that guarded the levator hiatus. Only loose areolar tissue comprising a remarkably well developed venous plexus connecting the middle and superior parts of the vagina with the lateral pelvic wall. The posterolateral boundary of the putative cardinal and sacrouterine ligaments coincided with the adventitia surrounding the mesorectum. The major difference between the young-adult and postmenopausal pelvic floor was the expansion of fat in between the components of the pelvic floor. We hypothesize that accumulation of pelvic fat compromises pelvic-floor cohesion, because the pre-pubertal pelvis contains very little fibrous and adipose tissue, and fat is an excellent lubricant.

Cortical folding in post-traumatic stress disorder after motor vehicle accidents: Regional differences in gyrification.

AIM: Structural and functional magnetic resonance imaging (MRI) studies have revealed evidence of brain abnormalities in post-traumatic stress disorder (PTSD) patients. Cortical complexity and local gyrification index (lGI) reflect potential biological processes associated with normal or abnormal cognitive functioning. In the current study, lGI was used to explore cortical folding in PTSD patients involved in motor vehicle accidents (MVA). METHODS: MRI brain scans were acquired from 18 PTSD patients who had suffered MVA at least 6 months previously and 18 healthy control subjects. All MRI images were obtained on a 3-T Siemens MRI machine and the cortical folding was analyzed using the workflow provided by software FreeSurfer. A general FreeSurfer's general linear model was used in the group analysis. In addition, correlation analysis was performed between the average of lGI extracted from the significantly different areas and the data for the clinical scale. RESULTS: The PTSD patients had significantly greater Clinician-Administered PTSD Scale scores than the control group. The patients showed significantly reduced lGI in the left lateral orbitofrontal cortex, consistent with findings of previous volumetric studies on PTSD. But there were no significant correlations in the left lateral orbitofrontal cortex between Clinician-Administered PTSD Scale scores and lGI. CONCLUSION: We suggest that abnormal gyrification in PTSD patients can be an important indicator of neurodevelopment deficits and may indeed be a biological marker for PTSD.

Creation of a Virtual Anatomy System based on Chinese Visible Human data sets.

PURPOSE: Human anatomy learning confronts many difficulties, including the lack of anatomical specimens and limitations in anatomical dissection techniques that can destroy and change the shape and position of anatomic structures. A Virtual Anatomy System can help to overcome these difficulties. METHODS: Based on the high-resolution thin-sectional anatomical images of the Chinese Visible Human data set, we created a Virtual Anatomical System, including nearly all male and female anatomical structures. RESULTS: With this system, medical students can freely observe the detailed anatomical information of the coronal, sagittal, and transverse sections through a 3D-reconstructed realistic model on a personal computer in the local network. CONCLUSIONS: This Virtual Anatomy System is an easy and direct way for students to learn and understand the shape and the relationship of anatomic structures, which can also make the anatomy learning more interesting. Furthermore, it can help students synthetically master the anatomical knowledge.

The China Mental Health Survey (CMHS): I. background, aims and measures.

The China Mental Health Survey (CMHS) is the first nationally representative community survey on mental disorders and mental health services in China. One-step diagnoses for mood disorders, anxiety disorders and substance use disorders were obtained using the Composite International Diagnostic Interview-3.0 (CIDI-3.0), according to the criteria and definition of the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV). A two-step procedure was applied for schizophrenia and other psychotic disorders, using psychosis screening section in CIDI-3.0 as a screening instrument and the Structured Clinical Interview for DSM-IV Axis I disorders (SCID) as a diagnostic tool. Dementia was diagnosed by the 10/66 dementia diagnosis package in a two-step design. The main aims of the CMHS were: (1) to investigate the prevalence of mood disorders, anxiety disorders, substance use disorders, schizophrenia and other psychotic disorders, and dementia; (2) to obtain data of service use of individuals with mental disorders in China; and (3) to analyse the social and psychological risk factors or correlates of mental disorders and mental health services. This paper presents a brief review of the background of the CMHS, its aims and measures.

The China Mental Health Survey: II. Design and field procedures.

China Mental Health Survey (CMHS), which was carried out from July 2013 to March 2015, was the first national representative community survey of mental disorders and mental health services in China using computer-assisted personal interview (CAPI). Face-to-face interviews were finished in the homes of respondents who were selected from a nationally representative multi-stage disproportionate stratified sampling procedure. Sample selection was integrated with the National Chronic Disease and Risk Factor Surveillance Survey administered by the National Centre for Chronic and Non-communicable Disease Control and Prevention in 2013, which made it possible to obtain both physical and mental health information of Chinese community population. One-stage design of data collection was used in the CMHS to obtain the information of mental disorders, including mood disorders, anxiety disorders, and substance use disorders, while two-stage design was applied for schizophrenia and other psychotic disorders, and dementia. A total of 28,140 respondents finished the survey with 72.9% of the overall response rate. This paper describes the survey mode, fieldwork organization, procedures, and the sample design and weighting of the CMHS. Detailed information is presented on the establishment of a new payment scheme for interviewers, results of the quality control in both stages, and evaluations to the weighting.

Overlapping and segregated resting-state functional connectivity in patients with major depressive disorder with and without childhood neglect.

Many studies have suggested that childhood maltreatment increase risk of adulthood major depressive disorder (MDD) and predict its unfavorable treatment outcome, yet the neural underpinnings associated with childhood maltreatment in MDD remain poorly understood. Here, we seek to investigate the whole-brain functional connectivity patterns in MDD patients with childhood maltreatment. Resting-state functional magnetic resonance imaging was used to explore intrinsic or spontaneous functional connectivity networks of 18 MDD patients with childhood neglect, 20 MDD patients without childhood neglect, and 20 healthy controls. Whole-brain functional networks were constructed by measuring the temporal correlations of every pairs of brain voxels and were further analyzed by using graph-theory approaches. Relative to the healthy control group, the two MDD patient groups showed overlapping reduced functional connectivity strength in bilateral ventral medial prefrontal cortex/ventral anterior cingulate cortex. However, compared with MDD patients without a history of childhood maltreatment, those patients with such a history displayed widespread reduction of functional connectivity strength primarily in brain regions within the prefrontal-limbic-thalamic-cerebellar circuitry, and these reductions significantly correlated with measures of childhood neglect. Together, we showed that the MDD groups with and without childhood neglect exhibited overlapping and segregated functional connectivity patterns in the whole-brain networks, providing empirical evidence for the contribution of early life stress to the pathophysiology of MDD.