RESUMO
Heterogeneity of pyrolytic parameters in municipal solid waste (MSW) significantly hinders its waste-to-energy efficiency. So far, hardly any light has been shed on current pyrolytic heterogeneity conditions or feasible pyrolytic homogeneity enhancement approaches of MSW. Accordingly, pyrolytic properties (Ea and logA) of 130 MSW samples in 6 categories were collected from literature. A kinetic parameters clustering-based sorting strategy for MSW was proposed. A so-called C index was established to compare their sorting performance for Ea and logA against two traditional sorting strategies (substance categorization and density clustering). Results showed that the proposed sorting strategies outperformed the traditional ones in pyrolytic homogeneity enhancement, where the optimal C_Ea and C_logA reached 1578.30 kJ/mol and 93.11 -log min. Among investigated clustering methods, k-means clustering outperformed hierarchical clustering, which could be attributed to its adaptability to the sample structure. Future perspectives involving data set expansion, model framework development, and downstream technologies matching were also discussed. The index C established in this study can be used to evaluate other clustering models.
Assuntos
Pirólise , Resíduos Sólidos , Análise por Conglomerados , Cinética , TecnologiaRESUMO
Cleanliness has been paramount for municipal solid waste incineration (MSWI) systems. In recent years, the rapid advancement of intelligent technologies has fostered unprecedented opportunities for enhancing the cleanliness of MSWI systems. This paper offers a review and analysis of cutting-edge intelligent technologies in MSWI, which include process monitoring, intelligent algorithms, combustion control, flue gas treatment, and particulate control. The objective is to summarize current applications of these techniques and to forecast future directions. Regarding process monitoring, intelligent image analysis has facilitated real-time tracking of combustion conditions. For intelligent algorithms, machine learning models have shown advantages in accurately forecasting key process parameters and pollutant concentrations. In terms of combustion control, intelligent systems have achieved consistent prediction and regulation of temperature, oxygen content, and other parameters. Intelligent monitoring and forecasting of carbon monoxide and dioxins for flue gas treatment have exhibited satisfactory performance. Concerning particulate control, multi-objective optimization facilitates the sustainable utilization of fly ash. Despite remarkable progress, challenges remain in improving process stability and monitoring instrumentation of intelligent MSWI technologies. By systematically summarizing current applications, this timely review offers valuable insights into the future upgrade of intelligent MSWI systems.
RESUMO
Membrane filtration is a mainstream method for landfill leachate treatment, leaving the landfill leachate membrane concentrates (LLMCs) a high-toxicity residue. Conventional LLMCs disposal technology shows specific challenges due to the low biodegradability, high inorganic salts, and high heavy metal ions content of LLMCs. Therefore, it is necessary to degrade LLMCs with a more suitable technology. In this study, a special method was proposed to convert some organic chemicals into valuable compounds by aqueous phase reforming (APR). Ni-based catalysts (Ni//La2O3, Ni/CeO2, Ni/MgO, and Ni/Al2O3) were prepared to investigate the effect of different supports on the APR of LLMCs. APR performed outstanding characteristics in the decrease of chemical oxygen demand (COD) and total organic carbon (TOC), the degradation of macromolecules, and the removal of heavy metal ions in the aqueous phase. In addition, H2 was generated which is beneficial for energy compensating during the APR process. The best-performing catalyst (Ni/Al2O3) was selected to investigate the effects of reaction temperature, reaction time, and catalyst addition on product distribution. The optimal H2 selectivity (44.71%) and H2 production (11.63 mmol/g COD) were obtained at 250 °C with 2 g Ni/Al2O3 usage for 1 h. This paper provided a new perspective on the disposal of LLMCs, which will degrade pollutants efficiently.
RESUMO
Excavated waste is a byproduct of microbial decomposition and fermentation following landfill disposal. The effective management and utilization of excavated waste offer broad prospects for environmental and resource protection, as well as economic growth. While current research predominantly focuses on plastics in landfills, the physico-chemical properties of excavated waste over extended landfilling time remain unclear. This study aimed to address this gap by excavating waste from a landfill in Tianjin, China, with a maximum landfilling time of 18 years. The findings revealed that, compared to municipal solid waste (MSW), the excavated waste exhibited increased calorific value, ash content, and fixed carbon content after screening the landfill-mined-soil-like-fine fraction. The average calorific value of the excavated waste could reach 57.8 MJ/kg. Additionally, the oxygen content in the excavated combustible waste exceeded that of MSW, increasing from 25.59 % to 34.22 %. This phenomenon is potentially linked to the oxidation of attached soil impurities and waste. The study identified polyethylene (PE), polypropylene (PP), expanded polystyrene (EPS), polyethylene terephthalate (PET), and wood as the primary combustible components. Notably, the excavated waste exhibited a significant decrease in surface gloss, adopting a rough texture with apparent holes, potentially attributed to the acidification and corrosion of organic matter during fermentation. Nevertheless, the breaking of molecular bonds could also contribute to waste fragmentation. Furthermore, an increase in landfilling time resulted in a more pronounced decrease in mechanical properties. For instance, the failure load of PE decreased from 15.61 N to 6.46 N, and PET reduced from 884.83 N to 186.56 N. The chemical composition of excavated waste has changed, with -OH and CO observed in PE with an 18-year landfilling time. In conclusion, these results provide a theoretical foundation for the recycling of excavated waste and contribute to the advancement of waste management and recycling technologies.
RESUMO
The loss of active components, weak acid resistance, and low recover efficiency of common Ca-based catalysts limited its further development and application. In this study, to effectively produce biodiesel from waste cooking oil (WCO), a green and recyclable magnetic acid-base bifunctional CoFe/biochar/CaO catalyst was prepared from sargassum and river snail shell waste via hydrothermal method. The catalysts' structure and properties were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), CO2/NH3 temperature programmed desorption (CO2/NH3 TPD), etc., The prepared catalyst mainly consisted of the carbon skeleton, CoFe alloy, and CaO. CoFe alloy provided catalyst's ferromagnetism for magnetic separation as well as acid sites for transesterification of WCO. Ca and other metal species with nanoscale (â¼5.64 nm) were dispersively anchored on sargassum biochar surface, thereby leading to good catalytic activity (99.21% biodiesel yield) and stability (91.70% biodiesel yield after the 5th cycle). In addition, response surface methodology-Box-Behnken design (RSM-BBD) revealed the optimal operational conditions were 16:1 methanol/oil molar ratio, 3 wt% catalyst dosage, 73 °C for 157 min. The maximum biodiesel yield predicted value was 98.29% and the experimental value was 99.21%, indicating good satisfaction of the established model. Moreover, the quality of WCO biodiesel met the ASTM D6751 standards. This study benefits magnetic waste-derived acid-base bifunctional catalysts for the disposal of WCO towards sustainable biodiesel production.