Oscillatoria limnetica Mediated Green Synthesis of Iron Oxide (Fe2O3) Nanoparticles and Their Diverse In Vitro Bioactivities.

Iron oxide nanoparticles (Fe2O3-NPs) were synthesized using Oscillatoria limnetica extract as strong reducing and capping agents. The synthesized iron oxide nanoparticles IONPs were characterized by UV-visible spectroscopy, Fourier transform infrared (FTIR), X-ray diffractive analysis (XRD), scanning electron microscope (SEM), and Energy dispersive X-ray spectroscopy (EDX). IONPs synthesis was confirmed by UV-visible spectroscopy by observing the peak at 471 nm. Furthermore, different in vitro biological assays, which showed important therapeutic potentials, were performed. Antimicrobial assay of biosynthesized IONPs was performed against four different Gram-positive and Gram-negative bacterial strains. E. coli was found to be the least suspected strain (MIC: 35 µg/mL), and B. subtilis was found to be the most suspected strain (MIC: 14 µg/mL). The maximum antifungal assay was observed for Aspergillus versicolor (MIC: 27 µg mL). The cytotoxic assay of IONPs was also studied using a brine shrimp cytotoxicity assay, and LD50 value was reported as 47 µg/mL. In toxicological evaluation, IONPs was found to be biologically compatible to human RBCs (IC50: >200 µg/mL). The antioxidant assay, DPPH 2,2-diphenyl-1-picrylhydrazyly was recorded at 73% for IONPs. In conclusion, IONPs revealed great biological potential and can be further recommended for in vitro and in vivo therapeutic purposes.

Advances and challenges in developing smart, multifunctional microneedles for biomedical applications.

Microneedles (MNs) have been developed as minimally invasive tools for diagnostic and therapeutic applications. However, in recent years, there has been an increasing interest in developing smart multifunctional MN devices to provide automated and closed-loop systems for body fluid extraction, biosensing, and drug delivery in a stimuli-responsive manner. Although this technology is still in its infancy and far from being translated into the clinic, preclinical trials have shown some promise for the broad applications of multifunctional MN devices. The main challenge facing the fabrication of smart MN patches is the integration of multiple modules, such as drug carriers, highly sensitive biosensors, and data analyzers in one miniaturized MN device. Researchers have shown the feasibility of creating smart MNs by integrating stimuli-responsive biomaterials and advanced microscale technologies, such as microsensors and microfluidic systems, to precisely control the transportation of biofluids and drugs throughout the system. These multifunctional MN devices can be envisioned in two distinct strategies. The first type includes individual drug delivery and biosensing MN units with a microfluidic system and a digital analyzer responsible for fluid transportation and communication between these two modules. The second type relies on smart biomaterials that can function as drug deliverers and biosensors by releasing drugs in a stimuli-responsive manner. These smart biomaterials can undergo structural changes when exposed to external stimuli, such as pH and ionic changes, mimicking the biological systems. Studies have demonstrated a high potential of hydrogel-based MN devices for a wide variety of biomedical applications, such as drug and cell delivery, as well as interstitial fluid extraction. Biodegradable hydrogels have also been advantageous for fabricating multifunctional MNs due to their high loading capacity and biocompatibility with the drug of choice. Here, we first review a set of MN devices that can be employed either for biosensing or delivery of multiple target molecules and compare them to the conventional and more simple systems, which are mainly designed for single-molecule sensing or delivery. Subsequently, we expand our insight into advanced MN systems with multiple competencies, such as body fluid extraction, biosensing, and drug delivery at the point of care. The improvement of biomaterials knowledge and biofabrication techniques will allow us to efficiently tune the next generation of smart MNs and provide a realistic platform for more effective personalized therapeutics.

Micro and Nanoscale Technologies for Diagnosis of Viral Infections.

Viral infection is one of the leading causes of mortality worldwide. The growth of globalization significantly increases the risk of virus spreading, making it a global threat to future public health. In particular, the ongoing coronavirus disease 2019 (COVID-19) pandemic outbreak emphasizes the importance of devices and methods for rapid, sensitive, and cost-effective diagnosis of viral infections in the early stages by which their quick and global spread can be controlled. Micro and nanoscale technologies have attracted tremendous attention in recent years for a variety of medical and biological applications, especially in developing diagnostic platforms for rapid and accurate detection of viral diseases. This review addresses advances of microneedles, microchip-based integrated platforms, and nano- and microparticles for sampling, sample processing, enrichment, amplification, and detection of viral particles and antigens related to the diagnosis of viral diseases. Additionally, methods for the fabrication of microchip-based devices and commercially used devices are described. Finally, challenges and prospects on the development of micro and nanotechnologies for the early diagnosis of viral diseases are highlighted.

Design and fabrication of polyvinylidene fluoride-graphene oxide/gelatine nanofibrous scaffold for cardiac tissue engineering.

Polyvinylidene fluoride (PVDF) electrospun scaffolds have recently been developed for cardiac tissue engineering applications thanks to their piezoelectricity. However, PVDFs' hydrophobic nature requires modifications by incorporating natural polymers. In this study, we focussed on the hybrid electrospinning of PVDF and gelatine and the further introduction of graphene oxide nanoparticles to investigate either hydrophilicity or piezoelectricity enhancement and its impact on mouse embryonic cardiomyocytes. The results revealed a nanofibre diameter of 379 ± 73 nm for the PVDF/gelatine/graphene oxide (PVDF-GO-CG) platform, providing excellent tensile strength. Additionally, hydrophilicity was improved by gelatine and GO incorporation compared with pure PVDF. Cellular studies also showed an elongated morphology of cardiomyocytes, similar to the myocardial tissue, as well as high viability and non-toxicity in the PVDF-GO-CG scaffold according to the average survival rate. Furthermore, the expression of connexin 43 and troponin T genes underwent an increment of 41 and 35% in the PVDF-GO-CG compared with the PVDF-CG sample. This study proves the applicability of the PVDF-GO-CG scaffold as an alternative substrate for developing engineered cardiac tissues by providing an environment to re-establish their synchronised communications.

Tissue adhesive hemostatic microneedle arrays for rapid hemorrhage treatment.

Blood loss by hemorrhaging wounds accounts for over one-third of ∼5 million trauma fatalities worldwide every year. If not controlled in a timely manner, exsanguination can take lives within a few minutes. Developing new biomaterials that are easy to use by non-expert patients and promote rapid blood coagulation is an unmet medical need. Here, biocompatible, and biodegradable microneedle arrays (MNAs) based on gelatin methacryloyl (GelMA) biomaterial hybridized with silicate nanoplatelets (SNs) are developed for hemorrhage control. The SNs render the MNAs hemostatic, while the needle-shaped structure increases the contact area with blood, synergistically accelerating the clotting time from 11.5 min to 1.3 min in vitro. The engineered MNAs reduce bleeding by ∼92% compared with the untreated injury group in a rat liver bleeding model. SN-containing MNAs outperform the hemostatic effect of needle-free patches and a commercial hemostat in vivo via combining micro- and nanoengineered features. Furthermore, the tissue adhesive properties and mechanical interlocking support the suitability of MNAs for wound closure applications. These hemostatic MNAs may enable rapid hemorrhage control, particularly for patients in developing countries or remote areas with limited or no immediate access to hospitals.

Injectable, Antibacterial, and Hemostatic Tissue Sealant Hydrogels.

Hemorrhage and bacterial infections are major hurdles in the management of life-threatening surgical wounds. Most bioadhesives for wound closure lack sufficient hemostatic and antibacterial properties. Furthermore, they suffer from weak sealing efficacy, particularly for stretchable organs, such as the lung and bladder. Accordingly, there is an unmet need for mechanically robust hemostatic sealants with simultaneous antibacterial effects. Here, an injectable, photocrosslinkable, and stretchable hydrogel sealant based on gelatin methacryloyl (GelMA), supplemented with antibacterial zinc ferrite (ZF) nanoparticles and hemostatic silicate nanoplatelets (SNs) for rapid blood coagulation is nanoengineered. The hydrogel reduces the in vitro viability of Staphylococcus aureus by more than 90%. The addition of SNs (2% w/v) and ZF nanoparticles (1.5 mg mL-1 ) to GelMA (20% w/v) improves the burst pressure of perforated ex vivo porcine lungs by more than 40%. Such enhancement translated to ≈250% improvement in the tissue sealing capability compared with a commercial hemostatic sealant, Evicel. Furthermore, the hydrogels reduce bleeding by ≈50% in rat bleeding models. The nanoengineered hydrogel may open new translational opportunities for the effective sealing of complex wounds that require mechanical flexibility, infection management, and hemostasis.

Coaxial 3D bioprinting of tri-polymer scaffolds to improve the osteogenic and vasculogenic potential of cells in co-culture models.

The crosstalk between osteoblasts and endothelial cells is critical for bone vascularization and regeneration. Here, we used a coaxial 3D bioprinting method to directly print an osteon-like structure by depositing angiogenic and osteogenic bioinks from the core and shell regions of the coaxial nozzle, respectively. The bioinks were made up of gelatin, gelatin methacryloyl (GelMA), alginate, and hydroxyapatite (HAp) nanoparticles and were loaded with human umbilical vascular endothelial cells (HUVECs) and osteoblasts (MC3T3) in the core and shell regions, respectively. Conventional monoaxial 3D bioprinting was used as a control method, where the hydrogels, HAp nanoparticles, MC3T3 cells, and HUVECs were all mixed in one bioink and printed from the core nozzle. As a result, the bioprinted scaffolds were composed of cell-laden fibers with either a core-shell or homogenous structure, providing a non-contact (indirect) or contact (direct) co-culture of MC3T3 cells and HUVECs, respectively. Both structures supported the 3D culture of HUVECs and osteoblasts over a long period. The scaffolds also supported the expression of osteogenic and angiogenic factors. However, the gene expression was significantly higher for the core-shell structure than the homogeneous structure due to the well-defined distribution of osteoblasts and endothelial cells and the formation of vessel-like structures in the co-culture system. Our results indicated that the coaxial bioprinting technique, with the ability to create a non-contact co-culture of cells, can provide a more efficient bioprinting strategy for printing highly vascularized and bioactive bone structures.

A Cohesive Shear-Thinning Biomaterial for Catheter-Based Minimally Invasive Therapeutics.

Shear-thinning hydrogels are suitable biomaterials for catheter-based minimally invasive therapies; however, the tradeoff between injectability and mechanical integrity has limited their applications, particularly at high external shear stress such as that during endovascular procedures. Extensive molecular crosslinking often results in stiff, hard-to-inject hydrogels that may block catheters, whereas weak crosslinking renders hydrogels mechanically weak and susceptible to shear-induced fragmentation. Thus, controlling molecular interactions is necessary to improve the cohesion of catheter-deployable hydrogels. To address this material design challenge, we have developed an easily injectable, nonhemolytic, and noncytotoxic shear-thinning hydrogel with significantly enhanced cohesion via controlling noncovalent interactions. We show that enhancing the electrostatic interactions between weakly bound biopolymers (gelatin) and nanoparticles (silicate nanoplatelets) using a highly charged polycation at an optimum concentration increases cohesion without compromising injectability, whereas introducing excessive charge to the system leads to phase separation and loss of function. The cohesive biomaterial is successfully injected with a neuroendovascular catheter and retained without fragmentation in patient-derived three-dimensionally printed cerebral aneurysm models under a physiologically relevant pulsatile fluid flow, which would otherwise be impossible using the noncohesive hydrogel counterpart. This work sheds light on how charge-driven molecular and colloidal interactions in shear-thinning physical hydrogels improve cohesion, enabling complex minimally invasive procedures under flow, which may open new opportunities for developing the next generation of injectable biomaterials.

Environmentally friendly antibiofilm strategy based on cationized phytoglycogen nanoparticles.

Biofilm tolerance to antibiotics has led to the search for new alternatives in treating biofilms. The use of metallic nanoparticles has been a suggested strategy against biofilms, but their potential environmental toxicity and high cost of synthesizing have limited their applications. In this study, we investigate the potential of polysaccharidic phytoglycogen nanoparticles extracted from corn, in treating cyanobacterial biofilms, which are the source of toxins and pollution in aquatic environments. Our results revealed that the surface of cyanobacterial cells was dominated by the negatively charged functional groups such as carboxylic and phosphoric groups. The native phytoglycogen (PhX) nanoparticles were dominated with non-charged groups, such as hydroxyl groups, and the cationized phytoglycogen (PhXC) nanoparticles showed positively charged surfaces due to the presence of quaternary ammonium cations. Our results indicated that, as opposed to PhX, PhXC strongly inhibited biofilm formation when dispersed in the culture medium. PhXC also eradicated the already grown cyanobacterial biofilms. The antibiofilm properties of PhXC were attributed to its strong electrostatic interactions with the cyanobacterial cells, which could inhibit cell/cell and cell/substrate interactions and nutrient exchange with the media. This class of antibacterial polysaccharide nanoparticles may provide a novel cost-effective and environment-friendly strategy for treating biofilm formation by a broad spectrum of bacteria.

Multimaterial bioprinting and combination of processing techniques towards the fabrication of biomimetic tissues and organs.

Tissue reconstruction requires the utilization of multiple biomaterials and cell types to replicate the delicate and complex structure of native tissues. Various three-dimensional (3D) bioprinting techniques have been developed to fabricate customized tissue structures; however, there are still significant challenges, such as vascularization, mechanical stability of printed constructs, and fabrication of gradient structures to be addressed for the creation of biomimetic and complex tissue constructs. One approach to address these challenges is to develop multimaterial 3D bioprinting techniques that can integrate various types of biomaterials and bioprinting capabilities towards the fabrication of more complex structures. Notable examples include multi-nozzle, coaxial, and microfluidics-assisted multimaterial 3D bioprinting techniques. More advanced multimaterial 3D printing techniques are emerging, and new areas in this niche technology are rapidly evolving. In this review, we briefly introduce the basics of individual 3D bioprinting techniques and then discuss the multimaterial 3D printing techniques that can be developed based on combination of these techniques for the engineering of complex and biomimetic tissue constructs. We also discuss the perspectives and future directions to develop state-of-the-art multimaterial 3D bioprinting techniques for engineering tissues and organs.

Recent advances in 3D bioprinting of musculoskeletal tissues.

The musculoskeletal system is essential for maintaining posture, protecting organs, facilitating locomotion, and regulating various cellular and metabolic functions. Injury to this system due to trauma or wear is common, and severe damage may require surgery to restore function and prevent further harm. Autografts are the current gold standard for the replacement of lost or damaged tissues. However, these grafts are constrained by limited supply and donor site morbidity. Allografts, xenografts, and alloplastic materials represent viable alternatives, but each of these methods also has its own problems and limitations. Technological advances in three-dimensional (3D) printing and its biomedical adaptation, 3D bioprinting, have the potential to provide viable, autologous tissue-like constructs that can be used to repair musculoskeletal defects. Though bioprinting is currently unable to develop mature, implantable tissues, it can pattern cells in 3D constructs with features facilitating maturation and vascularization. Further advances in the field may enable the manufacture of constructs that can mimic native tissues in complexity, spatial heterogeneity, and ultimately, clinical utility. This review studies the use of 3D bioprinting for engineering bone, cartilage, muscle, tendon, ligament, and their interface tissues. Additionally, the current limitations and challenges in the field are discussed and the prospects for future progress are highlighted.

Engineering Tough, Injectable, Naturally Derived, Bioadhesive Composite Hydrogels.

Engineering mechanically robust bioadhesive hydrogels that can withstand large strains may open new opportunities for the sutureless sealing of highly stretchable tissues. While typical chemical modifications of hydrogels, such as increasing the functional group density of crosslinkable moieties and blending them with other polymers or nanomaterials have resulted in improved mechanical stiffness, the modified hydrogels have often exhibited increased brittleness resulting in deteriorated sealing capabilities under large strains. Furthermore, highly elastic hydrogels, such as tropoelastin derivatives are highly expensive. Here, gelatin methacryloyl (GelMA) is hybridized with methacrylate-modified alginate (AlgMA) to enable ion-induced reversible crosslinking that can dissipate energy under strain. The hybrid hydrogels provide a photocrosslinkable, injectable, and bioadhesive platform with an excellent toughness that can be tailored using divalent cations, such as calcium. This class of hybrid biopolymers with more than 600% improved toughness compared to GelMA may set the stage for durable, mechanically resilient, and cost-effective tissue sealants. This strategy to increase the toughness of hydrogels may be extended to other crosslinkable polymers with similarly reactive moieties.