Field tests of crop growth using hydrothermal and spray-dried cephalosporin mycelia dregs as amendments: Utilization of nutrient and soil antibiotic resistome.

The disposal and reuse of cephalosporin mycelia dregs (CMDs) pose a great challenge to the biopharma industry, but it acts as the new source of antibiotic resistome, although agriculture intensification remains uncertain. Herein, two common cash crops (maize and soybean) were planted in the actual field, and the effects of the application of treated CMDs, chicken manure and chemical fertilizer served as control groups were both investigated according to comparison experiment. Amplicon-targeted 16S rRNA and high-throughput sequencing was analyzed for rhizosphere antibiotic resistome. Results showed that hydrothermal and spray-dried (HT + SD) CMDs could promote nutrients uptake and stabilize soil fertility indicator, and finally improved the crop yield (maximum, 119.68%). The numbers and relative abundances of total ARGs in soils were not significantly different from that of conventional fertilizer (p ＞ 0.05), but crop type marked the differences in distribution. The overall economic benefits are predicted to be around $373-745 million annually, considering its application to the whole country. HT + SD-treated CMDs can be therefore used as a high-quality and safe alternative fertilizer for agriculture use. These findings are expected to offer a fresh perspective on the application of antibiotic fermentation residue (AFR) in the future.

Effects of Al3+ on the microstructure and bioflocculation of anoxic sludge.

The aluminum ions generated from mining aluminum, electrolytic aluminum and the industrial production of aluminum-based coagulants (such as AlCl3 and Al2(SO4)3) enter sewage treatment plants and interact with activated sludges. An anaerobic/anoxic/oxic (A2O) process was used to reveal the effects of Al3+ on the pollutant removal efficiencies, bioflocculation and the microstructure of sludge. The results showed that a low concentration of Al3+ improved the pollutant removal efficiencies and increased the sludge particle size. However, a high concentration of Al3+ hindered microbial flocculation and reduced the pollutant removal efficiencies. With a 10 mg/L Al3+ addition, the chemical oxygen demand (COD), total nitrogen (TN) and NH4+-N increased by 3%, 16% and 27%, and reached as high as 68%, 60% and 87%, respectively. At the same time, the dehydrogenase activity, flocculation ability (FA) and contact angle of the sludge reached their maximum levels at 41.3 mg/L/hr, 45% and 79.63°, respectively. The specific surface area of the sludge decreased to 7.084 m2/g and the sludge pore size distribution shifted to concentrate in the mesoporous range. Most of Al3+ was adsorbed on the surface of sludge, changing the physicochemical properties and physical structure of the sludge.

Occurrence, distribution and ecological risk of ultraviolet absorbents in water and sediment from Lake Chaohu and its inflowing rivers, China.

The available information is insufficient to enable a reliable understanding of the global distribution and effect of organic ultraviolet absorbents (UVAs) on ecosystems. Little is known about the pollution of China's lakes by these chemicals. We conducted a survey of UVAs in water and sediment from Lake Chaohu and its inflowing rivers. The UVAs were widely present in this area and the concentrations of total 12 UVAs (Σ12 UVAs) ranged between 162 and 587 ng/L in water and 9.70-178 ng/g in sediment. Benzophenone and benzophenone-3 were dominant in water, and benzophenone and octocrylene dominated in sediment. Higher concentrations of benzophenone were detected in the investigated water samples, although the contamination levels of UVAs in this study were comparable to those investigated in other areas. In addition to the inputs from the UVAs used as filters in cosmetics, the discharge from industries using UVAs as stabilizers also contributed much to the pollution in the study waters. Generally, the risk to aquatic organisms from exposure to UVAs in this area was low, but further research is needed to elucidate the fate of UVAs and to understand bioaccumulation and associated risks.

Interleukin-11Rα2 in the hypothalamic arcuate nucleus affects depression-related behaviors and the AKT-BDNF pathway.

Depression is a widespread emotional disorder with complex pathogenesis. An essential function of the hypothalamus is to regulate emotional disorders. However, further investigation is required to identify the pathogenic genes and molecular mechanisms that contribute to the onset of depression within the hypothalamus. Through RNA-sequencing analysis, this study identified the upregulated expression of interleukin-11 receptor alpha 2 (IL-11Rα2) in the hypothalamus of mice with chronic unpredictable stress (CUS)-induced depression. This substantial increase in IL-11Rα2, not IL-11Rα1 expression levels in the hypothalamus under the influence of CUS was found to be associated with depression-related behaviors. We further showed that IL-11Rα2 is expressed in the arcuate nucleus (ARC) proopiomelanocortin (POMC) neurons of the hypothalamus. Male and female mice exhibited behaviors association with depression, when IL-11Rα2 or its ligand IL-11 was overexpressed in the ARC POMC neurons through the action of an adeno-associated virus. In addition, reductions in the expression levels of proteins involved in the protein kinase B signaling pathways and brain-derived neurotrophic factor were observed upon overexpression of IL-11Rα2 in the hypothalamic ARC. This study emphasizes the importance of IL-11Rα2 in the hypothalamus ARC in the development of depression, and presents it as a potential novel target for depression treatment.

Erythromycin fermentation residue exposure induces a short-term wave of antibiotic resistance in a soil-lettuce system.

The pattern of antibiotic resistance assembly and their unclear transfer in a soil-lettuce system render the treated erythromycin fermentation residue (EFR) land application risky. Herein, the antibiotic resistance genes (ARGs), mobile gene elements, and microbial communities were examined under erythromycin stress at three stages of lettuce growth. Erythromycin exhibited degradation rates of 99.4 % in soils for 60 d, with little uptake in the seedling tissues, reaching a 0.11-0.71 bioconcentration factor range. The EFR application rate must be limited <1 % to avoid human exposure risk. The diversity, biotic networks complexity, and edaphic ARG abundances of the rhizospheric microbial communities increased at the early stage, but returned to the control levels at the mature stage. The Planomicrobium and Pseudomonas bacterial genera were important biotic factors for erythromycin variation. Thirty-three MLSB genes (macrolide, lincosamide, and streptogramin B) conferring resistance to erythromycin were detected in soil, but only two endophytic ARGs (mphA-01 and ermX) were identified, with members of the Microvirga genus being the potential hosts. Partial least-squares path modeling suggested that erythromycin concentration was the main factor for endophytic ARGs evolution. This study highlighted the leaf endophytic ARG emergence and potential exposure human risks majorly caused by the drug traces in antibiotic fermentation residues.

Sustainable on-farm strategy for the disposal of antibiotic fermentation residue: Co-benefits for resource recovery and resistance mitigation.

Antibiotic fermentation residue is a key issue for the sustainable operation of pharmaceutical companies, and its improper disposal may cause antibiotic resistance transfer in the environment. However, little is known about the resource recycling strategy of this pharmaceutical waste. Herein, we used hydrothermal spray-dried (HT+SD) and multi-plate dryer (MD) methods to produce bio-organic fertilizers and applied them to an internal recycling model of a field trial. The concentrations of antibiotics (penicillin, cephalosporin, and erythromycin) in the bio-fertilizer, wastewater, and exhaust gas were in the range of 0.002-0.68 mg/kg, ≤ 0.35 ng/mL, and 0.03-0.89 ng/mL, respectively. The organic matter and total nitrogen, phosphorus, and potassium contents were approximately 80% and 10%, respectively. The soil bacterial community was similar among the fertilizer treatments in the same crop cultivation. A total of 233 antibiotic resistance genes (ARGs) and 43 mobile genetic elements (MGEs) were detected, including seven Rank I ARGs and five Rank II ARGs. Random forest analysis showed that gene acc(3)-Via and plasmid trb-C were biomarkers, for which the resistance and the transfer mechanisms were antibiotic inactivation and conjugation, respectively. The results imply that AFR recycling disposal mode is a promising prospect for pharmaceutical waste management.

Recycling of neomycin fermentation residue using SEA-CBS technology: Growth performance and antibiotic resistance genes.

Antibiotic fermentation residue (AFR) is a form of bioavailable matter, that represents a typical category of hazardous waste associated with drug production in China. The disposal of these residues seriously restricts the sustainable development of the pharmaceutical industry. In this study, the steam explosion and aerobic composting (SEA-CBS) system was developed to thoroughly convert neomycin fermentation residue to organic fertilizer. The results implied that the ultimate removal rate of antibiotics was as high as 99.9% in all cases, including macrolide (kitasamycin and spiramycin), lincosamide (lincomycin), and beta-lactam (cephalosporin and penicillin) antibiotic biowastes. Pot experiments were also conducted to study the attenuation rule of antibiotic residues in the soil, and the distribution of antibiotic resistant genes from trace antibiotics. The produced fertilizer presented the better performance on mustard growth than conventional fertilizers. The average plant height and biomass were increased by 14.33%-55.83% and 136.71%-326.83%, respectively, after SEA-CBS pretreatment. Moreover, neomycin was the primary selective pressure, and six antibiotic resistance genes (ARGs) correlated with neomycin were screened. The acc(6')ib gene was identified as the target ARGs, the main resistance mechanism was antibiotic inactivation, and the absolute and relative abundances were 1.06 × 105 ± 3.80 × 104 copies/g and 6.23 × 10-4 ± 1.75 × 10-4 copies/16 s in the NFR-amended soils. The microbial community analysis showed that the variation of the soil microbial community was not dominated by neomycin fermentation residue (NFR) at initial concentrations below 0.42 µg/kg soil. This work demonstrated that the SEA-CBS system not only functioned as an efficient technology for concurrent neomycin sulfate removal and NFR composting, but also applied to a wide range of other antibiotic bio-wastes, which may benefit the recycling of AFR, as well as the data provide a theoretical basis for future agricultural utilization and safe evaluation.

Effects of Enterococcus faecalis administration on the community structure of airborne bacteria in weanling piglet and layer hen houses.

Probiotics have been shown to improve microbial compositions in animal intestine and feces, but the effects of probiotic administration on airborne microbial composition in animal houses remain unclear. In this study, we investigated the effects of dietary Enterococcus faecalis on the bacterial community structure in the air of piglet and layer hen houses. Indoor air and feces from piglet and layer hen houses were sampled after supplementing E. faecalis in feed for 60 days, and bacterial community structures were analyzed using Illumina high-throughput sequencing technology. Results showed that Chao1, ACE, Shannon, and Simpson indices of bacterial diversity did not significantly change in feces or indoor air of piglet or layer hen after supplementation with E. faecalis (P > 0.05). However, E. faecalis administration resulted in a decrease in the relative abundance of Proteobacteria (P < 0.05). In addition, E. faecalis significantly reduced the relative abundance of opportunistic pathogens such as Acinetobacter, Escherichia, and Shigella (P < 0.05), and beneficial bacterial genus such as Lactobacillus was significantly enriched in both feces and indoor air (P < 0.05). These changes should be of benefit to livestock, farm workers, and the surrounding environment.

Effect of antibiotic type and vegetable species on antibiotic accumulation in soil-vegetable system, soil microbiota, and resistance genes.

Antibiotic accumulation in soil and plants is an escalating problem in agriculture and is receiving increasing attention. However, the effect of plant species on the fate of different types of antibiotics in a soil-vegetable system and soil resistome has not been adequately explored. To this end, greenhouse pot experiments were conducted to simulate contamination by ciprofloxacin (CIP), oxytetracycline (OTC), sulfamethoxazole (SMZ), and tylosin (TY) at 1 mg kg-1 in the soils in which cabbage, endive, and spinach were grown. We investigated antibiotic persistence in soils and accumulation in vegetables (i.e., spinach, endive, and cabbage), microbial community profiles, and the abundance of 17 antibiotic resistance genes (ARGs) in contaminated soils. After 40 days, the residues of CIP and OTC in soil and their accumulation in vegetables were significantly higher than those of SMZ and TY. Of all vegetables, spinach had the highest antibiotic accumulation. Further, antibiotic contamination had no significant effect on soil microbial abundance; however, soil microbial diversity significantly decreased in soils amended with TY. The antibiotic type more significantly affected microbial composition than the kind of vegetable species. The relative abundances of some ARGs significantly increased in contaminated soils. Particularly, in endive soil, quinolone-associated cmlA, cmlA2, and qnrS1 increased with CIP contamination, OTC contamination increased tetG2 and otrA, SMZ increased sul1, and TY increased macrolide-related carB and msrc-01 relative abundance. However, some individual ARGs declined upon antibiotic contamination. Our results indicated that antibiotic type and vegetable species jointly shape the profiles of soil microorganisms and ARGs.

Effects of graphite particles/Fe3+ on the properties of anoxic activated sludge.

In order to improve the sludge flocculation, the combination of graphite particles/Fe3+ was used to change the sludge properties and accelerate the electron transfer rate. The effects of Fe3+ on the properties of graphite particles were investigated and the synergistic effects of graphite particles/Fe3+ on the sludge properties were analyzed using N2-adsorption/desorption, scanning electron microscopy-X-ray energy dispersive analysis (SEM-EDX), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The results showed that the operation time affected the specific surface area and pore size of graphite particles. The addition of Fe3+ reduced the specific surface area and increased the pore size of graphite particles, but it did not change the crystal structure of the graphite particles and the group structure of the sludge. Under the function of graphite particles/Fe3+, Zeta potential were improved and the relative hydrophobicity of the sludge was weakened. The contact angle was slightly lowered and flocculation ability (FA) was increased. Therefore, graphite particles/Fe3+ played an important role in the charge transfer and bioflocculation improvement.

Speciation of zinc in secondary fly ashes of municipal solid waste at high temperatures.

The evaporation aerosols produced during the vitrification process of municipal solid waste incinerators (MSWI) fly ash represent a potential environmental risk owing to their high content of heavy metals. In this research, high-temperature heating processes were carried out on fly ashes collected from bag houses in a Chinese MSWI plant and the secondary fly ashes (SFA) were separately collected at three high temperatures (1273 K, 1423 K and 1523 K) below the melting range. Elemental analysis showed that high contents of both zinc and chlorine were present in these SFA samples and, according to the standard of the heavy metals industrial grade of ore, SFAs can be re-used as metallurgical raw materials or rich ore. Moreover, as shown by XAS analysis and for different high temperatures, zinc environments in the three SFA samples were characterized by the same local structure of the zinc chloride. As a consequence, a zinc recycling procedure can be easily designed based on the configuration information.

Melting characteristics during the vitrification of MSWI fly ash with a pilot-scale diesel oil furnace.

Treatment of municipal solid waste incineration (MSWI) fly ash is becoming an important issue in China. A pilot-scale experiment was carried out to treat MSWI fly ash by using a diesel oil furnace (DOF) for more than 6 months. The effects of melting temperature on volume reduction, weight loss, compositional changes, and toxicity of leach water for molten slag have been investigated and reported. Results indicated that the volume reduction fraction of raw fly ash (RFA) and washed-fly ash (WFA) was 75-80% and the weight loss fraction was 23.8-30% at 1260-1350 degrees C. During the vitrification, CaO, A12O3, and SiO2 percentages in fly ash increased as the temperature increased, especially for SiO2, which was caused by both the decomposition of carbonates or sulfates and the volatilization of metal chlorides because the main components in secondary fly ash collected from fabric filter bags were NaCl and KCl. The leaching concentrations of heavy metals in molten slag were lower than the standard values of TCLP. The releasing levels of dioxin and other pollutants (such as SO2, HCl, CO, NOx, etc.) in flue gas were all lower than the Chinese standard.

Electrokinetic-Fenton remediation of organochlorine pesticides from historically polluted soil.

Soil contamination by persistent organic pollutants (POPs) poses a great threat to historically polluted soil worldwide. In this study, soils were characterized, and organochlorine pesticides contained in the soils were identified and quantified. Individual electrokinetic (IE), EK-Fenton-coupled technologies (EF), and enhanced EK-Fenton treatment (E-1, E-2, and E-3) were applied to remediate soils contaminated with hexachloro-cyclohexane soprocide (HCH) and dichloro-diphenyl-trichloroethane (DDT). Variation of pH, electrical conductivity, and electroosmotic flow was evaluated during the EK-Fenton process. The IE treatment showed low removal efficiency for HCHs (30.5%) and DDTs (25.9%). In the EF treatment, the highest removal level (60.9%) was obtained for α-HCH, whereas P,P-DDT was the lowest (40.0%). Low solubility of pollutants impeded the HCH and DDT removal. After enhanced EK-Fenton treatment, final removal of pollutants decreased as follows: ß-HCH (82.6%) > γ-HCH (81.6%) > α-HCH (81.2%) > δ-HCH (80.0%) > P,P-DDD (73.8%) > P,P-DDE (73.1%) > P,P-DDT (72.6%) > O,P-DDT (71.5%). The results demonstrate that EK-Fenton is a promising technology for POP removal in historically polluted soil.

Chemical speciation of lead in secondary fly ash using X-ray absorption spectroscopy.

In this study, fly ash samples were collected from bag houses in a Chinese municipal solid waste incinerator (MSWI) and secondary fly ash (SFA) samples were collected from a high-temperature tubular electric furnace by thermal treatment of MSWI fly ash at 1050, 1100, 1150, 1200, and 1250 °C.We determined the speciation and atomic coordinates of lead in SFA using X-ray absorption spectroscopy (XAS) techniques. The results obtained by X-ray absorption near edge structure (XANES) spectra revealed that the mass fraction of PbO in MSWI fly ash was 57.9% (wt %) while PbCl2 and PbS were the dominant species in SFA. Extended X-ray absorption fine structure (EXAFS) data analysis indicated the atomic coordinates of Pb were proportional to the weights of PbCl2 and PbS, in good agreement with the XANES spectra. These findings highlight lead evaporation processes in the MSWI fly ash during heat treatment and provide a method for consistent speciation analysis of environmental samples using XAS.

Seasonal and spatial distributions of atmospheric polychlorinated naphthalenes in Shanghai, China.

Air samples were collected in Shanghai during summer and winter 2013, and the gas and particulate concentrations of polychlorinated naphthalenes (PCNs) were measured. All 75 congeners were quantified and the corresponding toxic equivalents (TEQs) were calculated. PCN concentrations were higher in summer than winter, at 8.22-102 pg/m(3) (average of 61.3 pg/m(3)) in summer and 16.5-61.1 pg/m(3) (average of 37.7 pg/m(3)) in winter. Their seasonal TEQ values were in contrast, at 1.35-7.31 fg/m(3) (average of 3.84 fg/m(3)) in summer and 4.08-23.3 fg/m(3) (average of 8.80 fg/m(3)) in winter, because of the seasonal change in congener profiles. Tri-CNs were the predominant homologs in both the summer and winter samples. However, the major congeners in summer were PCNs containing less chlorine, but these decreased over winter. Air mass back trajectories suggested that wind direction over various sites was similar in the summer and winter seasons, yet there were clear seasonal variations in atmospheric PCN concentrations. Ratios of several characteristic congeners were calculated and the results indicated that the ratios varied only to a limited extent with PCN emissions profile from industrial thermal sources, but varied strongly with profiles of technical PCN and PCN contaminants in polychlorinated biphenyl mixtures. The results of principal component analysis suggest that local industrial thermal emissions (thermal processes containing waste incineration and secondary metal smelting processes) still play a considerable role in influencing the atmospheric PCNs in Shanghai.

Perspective on polychlorinated dibenzo-p-dioxin and dibenzofuran emissions during chemical production in China: an overlooked source of contemporary relevance.

Polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/DFs) are pollutants of significant global concern, and China with its large size and industries is one of the main dioxin-emitting countries in the world. PCDDs/DFs may be formed during the manufacture of chemicals and can either remain in the products as impurities or be emitted into the environment or residues disposed to landfills. The uncertainties in the environmental emissions of PCDDs/DFs from the chemical production industry in China are large because of the complex nature of the industry and variability in the technologies used and limited monitoring conducted. In the current study, we used the PCDD/DF emission factor from the updated United Nations Environment Programme (UNEP) toolkit 2013, information from otherwise published data, and the chemical production data in 2010 to estimate PCDD/DF emissions from the chemical productions in China. Based on these data, it was estimated that there is 1480 g toxic equivalent (TEQ) from the chemical production industry in China, which is much higher than the value that was estimated and used in the national implementation plans (NIPs) for China (102.4 g TEQ in 2004). These results indicate that current PCDD/DF emissions from the chemical production industry in China may be overlooked. Therefore, we suggest that attention should be paid to PCDD/DF emissions from the chemical production industry in future updates of the Chinese NIP and that appropriate measures to decrease PCDD/DF emissions should be taken by better monitoring of products and processes in chemical production industry.

The distribution and biomagnification of higher brominated BDEs in terrestrial organisms affected by a typical e-waste burning site in South China.

Soil, vegetation, and several terrestrial species including turtledove, chicken, goose, grasshopper, dragonfly, butterfly and ant, were collected from an area surrounding a typical e-waste burning site in South China. The samples were examined to investigate the levels, congener profiles, and biomagnification extent of polybrominated diphenyl ethers (PBDEs) that may be present in the environment as a result of the e-waste, which was processed in a crude recycling style. Elevated levels of Σ(21)PBDEs were found in the biota (101­4725 ng g(−1) lipid weight (lw)), vegetation leaf (82.9­319 ng g(−1) dry weight (dw)) and soil samples (5.2­22 110 ng g(−1) dw), indicating that PBDE contamination in the samples collected from the e-waste burning site may pose risks to the local terrestrial ecosystem and local populations. Higher BDE congeners, especially deca-BDE (BDE-209) were the dominant homologs in organisms and nonbiological matrices, followed by nona-BDE and octa-BDE. Biomagnification factors (BMFs) were calculated as the ratio of the lipid-normalized concentration in the predator to that in the prey. The highest BMF (3.4) was determined for BDE-153 in the grasshopper/turtledove food chain. Other higher brominated congeners, such as BDE-202, -203, -154, -183 and -209, were also biomagnified in the terrestrial food chain with BMFs of 1.7­3.3. BDE-47, -100, and -99 were not biomagnified in the examined food chains (BMFs < 1), which suggests that bioaccumulation and biotransformation of PBDEs in terrestrial ecosystems could be distinguished from those in aquatic ecosystems.

Passive air sampling for determining the levels of ambient PCDD/Fs and their seasonal and spatial variations and inhalation risk in Shanghai, China.

The seasonal and spatial variations, compositional profiles, and possible sources of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in ambient air samples in Shanghai of China were investigated by passive air samplers, and the potential inhalation risks posed by these chemicals were evaluated. The following results were obtained: (1) The World Health Organization (WHO) toxic equivalency (TEQ) values for PCDD/Fs were in the range of 10.8-259 fg m(-3) (mean 63.4 fg m(-3)) in summer and 24.1-154 fg m(-3) (mean 83.4 fg m(-3)) in winter. Atmospheric PCDD/F levels were in the following order: industrial areas > commercial and residential areas > rural areas. (2) 2,3,4,7,8-PeCDF (24 %), 2,3,7,8-TeCDD (16 %), 1,2,3,7,8-PeCDD (13 %), and 2,3,7,8-TeCDF (12 %) were the predominant contributors to the TEQ of PCDD/Fs. (3) There was a slight seasonal trend with higher TEQ values in winter than in summer, which could be related to seasonal variations in the dispersion of PCDD/Fs in ambient air. (4) The children's daily intake was at the lower end of the range for the tolerable daily intake of PCDD/Fs recommended by WHO, which indicates that the inhalation risk of PCDD/Fs for local residents in Shanghai is relatively low.

Metagenomics reveals the resistance patterns of electrochemically treated erythromycin fermentation residue.

Erythromycin fermentation residue (EFR) represents a typical hazardous waste produced by the microbial pharmaceutical industry. Although electrolysis is promising for EFR disposal, its microbial threats remain unclear. Herein, metagenomics was coupled with the random forest technique to decipher the antibiotic resistance patterns of electrochemically treated EFR. Results showed that 95.75% of erythromycin could be removed in 2 hr. Electrolysis temporarily influenced EFR microbiota, where the relative abundances of Proteobacteria and Actinobacteria increased, while those of Fusobacteria, Firmicutes, and Bacteroidetes decreased. A total of 505 antibiotic resistance gene (ARG) subtypes encoding resistance to 21 antibiotic types and 150 mobile genetic elements (MGEs), mainly including plasmid (72) and transposase (52) were assembled in EFR. Significant linear regression models were identified among microbial richness, ARG subtypes, and MGE numbers (r2=0.50-0.81, p< 0.001). Physicochemical factors of EFR (Total nitrogen, total organic carbon, protein, and humus) regulated ARG and MGE assembly (%IncMSE value = 5.14-14.85). The core ARG, MGE, and microbe sets (93.08%-99.85%) successfully explained 89.71%-92.92% of total ARG and MGE abundances. Specifically, gene aph(3')-I, transposase tnpA, and Mycolicibacterium were the primary drivers of the resistance dissemination system. This study also proposes efficient resistance mitigation measures, and provides recommendations for future management of antibiotic fermentation residue.

Investigating the speciation of copper in secondary fly ash by X-ray absorption spectroscopy.

Although some researchers have reported that chlorides may play an important part in the evaporation of copper during heat treatment of municipal solid waste incinerators (MSWI) fly ash (1, 2) , details on the copper speciation in volatile matters (secondary fly ash, SFA) are still lacking. In this work, we used in situ X-ray absorption spectroscopy (XAS) experiments involving three types of SFA, which was collected from a high-temperature tubular electric furnace by thermal treatment of municipal solid waste incinerator (MSWI) fly ash at 1000, 1150, and 1250 degrees C. The results obtained by a linear combination fit (LCF) of X-ray absorption near edge structure (XANES) spectra revealed that in MSWI fly ash copper mainly exists as CuO and CuSO(4).5H(2)O while chloride almost dominated all the content of the SFA conformation, which was more than 80%. Extended X-ray absorption fine structure (EXAFS) data analysis indicated the presence of both Cu-O and Cu-Cl bonds in the first coordination shell of Cu ions in all SFA, while only Cu-O bonds occur in the MSWI fly ash. Consequently, in the MSWI fly ash during heat treatment copper evaporated as chloride, and the latter plays an important role in the formation of copper chloride.