RESUMO
Saturated fatty acids (FA) exert adverse health effects and are more likely to cause insulin resistance and type 2 diabetes than unsaturated FA, some of which exert protective and beneficial effects. Saturated FA, but not unsaturated FA, activate Jun N-terminal kinase (JNK), which has been linked to obesity and insulin resistance in mice and humans. However, it is unknown how saturated and unsaturated FA are discriminated. We now demonstrate that saturated FA activate JNK and inhibit insulin signaling through c-Src activation. FA alter the membrane distribution of c-Src, causing it to partition into intracellular membrane subdomains, where it likely becomes activated. Conversely, unsaturated FA with known beneficial effects on glucose metabolism prevent c-Src membrane partitioning and activation, which are dependent on its myristoylation, and block JNK activation. Consumption of a diabetogenic high-fat diet causes the partitioning and activation of c-Src within detergent insoluble membrane subdomains of murine adipocytes.
Assuntos
Adipócitos/metabolismo , Ácidos Graxos/metabolismo , Resistência à Insulina , Membranas Intracelulares/metabolismo , Proteínas Quinases JNK Ativadas por Mitógeno/metabolismo , Proteínas Proto-Oncogênicas pp60(c-src)/metabolismo , Adipócitos/química , Animais , Diabetes Mellitus Tipo 2/metabolismo , Dieta , Ácidos Graxos Insaturados/metabolismo , Fibroblastos/metabolismo , Camundongos , Camundongos Endogâmicos C57BL , Obesidade/metabolismo , Proteínas Proto-Oncogênicas pp60(c-src)/análise , Transdução de SinaisRESUMO
The integration of next-generation electronics into society is rapidly reshaping our daily interactions and lifestyles, revolutionizing communication and engagement with the world. Future electronics promise stimuli-responsive features and enhanced biocompatibility, such as skin-like health monitors and sensors embedded in food packaging, transforming healthcare and reducing food waste. Imparting degradability may reduce the adverse environmental impact of next-generation electronics and lead to opportunities for environmental and health monitoring. While advancements have been made in producing degradable materials for encapsulants, substrates, and dielectrics, the availability of degradable conducting and semiconducting materials remains restricted. π-Conjugated polymers are promising candidates for the development of degradable conductors or semiconductors due to the ability to tune their stimuli-responsiveness, biocompatibility, and mechanical durability. This perspective highlights three design considerations: the selection of π-conjugated monomers, synthetic coupling strategies, and degradation of π-conjugated polymers, for generating π-conjugated materials for degradable electronics. We describe the current challenges with monomeric design and present options to circumvent these issues by highlighting biobased π-conjugated compounds with known degradation pathways and stable monomers that allow for chemically recyclable polymers. Next, we present coupling strategies that are compatible for the synthesis of degradable π-conjugated polymers, including direct arylation polymerization and enzymatic polymerization. Lastly, we discuss various modes of depolymerization and characterization techniques to enhance our comprehension of potential degradation byproducts formed during polymer cleavage. Our perspective considers these three design parameters in parallel rather than independently while having a targeted application in mind to accelerate the discovery of next-generation high-performance π-conjugated polymers for degradable organic electronics.
RESUMO
Carotenoids are a class of biobased conjugated molecules that bear a resemblance to the substructure of polyacetylene, a well-known conductive but insoluble polymer. Solubility is an important physical attribute for processing materials using different techniques. To impart solubility in polymers, alkyl side chains are often included in the molecular design. While these design strategies are well explored in conjugated systems, they have not been implemented with carotenoids as a building block in polymers. Here, we show a series of carotenoid-based polymers with varying side chain lengths to tune solubility. Using carotenoid and p-phenylenediamine-based monomers, degradable and biobased poly(azomethine)s were synthesized via imine polycondensation. Maximum solubilities corresponding to the varying alkyl chain lengths were quantitatively determined by ultraviolet-visible (UV-vis) absorption spectroscopy. Since carotenoids are biobased with known degradation products, the effect of acidic and artificial sunlight-promoted degradation was systematically investigated using UV-vis spectroscopy, 1H nuclear magnetic resonance (NMR) spectroscopy, infrared (IR) spectroscopy, gel permeation chromatography (GPC), and high-resolution mass spectroscopy (HRMS). Our polymer system was found to have two modes of on-demand degradation, with acid hydrolysis accelerating the rate of polymer degradation and artificial sunlight generating additional degradation products. This work highlights carotenoid monomers as viable candidates in the design of biobased, degradable, and conjugated polymers.
RESUMO
BACKGROUND: Inequitable follow-up of abnormal cancer screening tests may contribute to racial/ethnic disparities in colon and breast cancer outcomes. However, few multi-site studies have examined follow-up of abnormal cancer screening tests and it is unknown if racial/ethnic disparities exist. OBJECTIVE: This report describes patterns of performance on follow-up of abnormal colon and breast cancer screening tests and explores the extent to which racial/ethnic disparities exist in public hospital systems. DESIGN: We conducted a retrospective cohort study using data from five California public hospital systems. We used multivariable robust Poisson regression analyses to examine whether patient-level factors or site predicted receipt of follow-up test. MAIN MEASURES: Using data from five public hospital systems between July 2015 and June 2017, we assessed follow-up of two screening results: (1) colonoscopy after positive fecal immunochemical tests (FIT) and (2) tissue biopsy within 21 days after a BIRADS 4/5 mammogram. KEY RESULTS: Of 4132 abnormal FITs, 1736 (42%) received a follow-up colonoscopy. Older age, Medicaid insurance, lack of insurance, English language, and site were negatively associated with follow-up colonoscopy, while Hispanic ethnicity and Asian race were positively associated with follow-up colonoscopy. Of 1702 BIRADS 4/5 mammograms, 1082 (64%) received a timely biopsy; only site was associated with timely follow-up biopsy. CONCLUSION: Despite the vulnerabilities of public-hospital-system patients, follow-up of abnormal cancer screening tests occurs at rates similar to that of patients in other healthcare settings, with colon cancer screening test follow-up occurring at lower rates than follow-up of breast cancer screening tests. Site-level factors have larger, more consistent impact on follow-up rates than patient sociodemographic traits. Resources are needed to identify health system-level factors, such as test follow-up processes or data infrastructure, that improve abnormal cancer screening test follow-up so that effective health system-level interventions can be evaluated and disseminated.
Assuntos
Neoplasias da Mama , Neoplasias Colorretais , Humanos , Feminino , Estudos Retrospectivos , Detecção Precoce de Câncer , Seguimentos , Neoplasias da Mama/diagnóstico , Colonoscopia , California/epidemiologia , Neoplasias Colorretais/diagnósticoRESUMO
BACKGROUND/OBJECTIVES: This subgroup analysis of the ALLEGRO phase 2b/3 trial (NCT03732807) evaluated the efficacy and safety of ritlecitinib, an oral, selective dual JAK3/TEC family kinase inhibitor, for the treatment of alopecia areata (AA) in patients aged 12-17 years. METHODS: In ALLEGRO-2b/3, patients aged ≥12 years with AA and ≥50% scalp hair loss received once-daily ritlecitinib 50 or 30 mg (±4-week 200-mg loading dose) or 10 mg or placebo for 24 weeks. In a subsequent 24-week extension period, ritlecitinib groups continued their doses, and patients initially assigned to placebo switched to 200/50 or 50 mg daily. Clinician- and patient-reported hair regrowth outcomes and safety were assessed. RESULTS: In total, 105 adolescents were randomized. At Week 24, 17%-28% of adolescents achieved a Severity of Alopecia Tool (SALT) score ≤20 (≤20% scalp without hair) in the ritlecitinib 30 mg and higher treatment groups versus 0% for placebo. At Week 48, 25%-50% of patients had a SALT score ≤20 across ritlecitinib treatment groups (30 mg and higher). Adolescents reporting that their AA "moderately" or "greatly" improved were 45%-61% in the ritlecitinib groups (30 mg and higher) (vs. 10%-22% for placebo) at Week 24 and 44%-80% at Week 48. The most common adverse events in adolescents were headache, acne, and nasopharyngitis. No deaths, major adverse cardiovascular events, malignancies, pulmonary embolisms, opportunistic infections, or herpes zoster infections were reported. CONCLUSION: Ritlecitinib treatment demonstrated clinician-reported efficacy, patient-reported improvement, and an acceptable safety profile through Week 48 in adolescents with AA with ≥50% scalp hair loss.
Assuntos
Alopecia em Áreas , Adolescente , Humanos , Alopecia em Áreas/tratamento farmacológico , Carbazóis/uso terapêutico , Método Duplo-Cego , Inibidores de Proteínas Quinases/uso terapêutico , Índice de Gravidade de DoençaRESUMO
BACKGROUND: Racial/ethnic disparities in anticoagulation management are well established. Differences in warfarin monitoring can contribute to these disparities and should be measured. OBJECTIVE: We assessed for differences in international normalized ratio (INR) monitoring by race/ethnicity and language preference across safety-net care systems serving predominantly low-income, ethnically diverse populations. DESIGN: Cross-sectional analysis of process and safety data shared from the Safety Promotion Action Research and Knowledge Network (SPARK-Net) initiative, a consortium of five California safety-net hospital systems. PARTICIPANTS: Eligible patients were at least 18 years old, received warfarin for at least 56 days during the measurement period from July 2015 to June 2017, and had INR testing in an ambulatory care setting at a participating healthcare system. MAIN MEASURES: We conducted a scaled Poisson regression for adjusted rate ratio of having at least one INR checked per 56-day time period for which a patient had a warfarin prescription. Adjusting for age, sex, healthcare system, and insurance status/type, we assessed for racial/ethnic and language disparities in INR monitoring. KEY RESULTS: Of 8129 patients, 3615 (44%) were female; 1470 (18%), Black/African American; 3354 (41%), Hispanic/Latinx; 1210 (15%), Asian; 1643 (20%), White; and 452 (6%), other. Three thousand five hundred forty-nine (45%) were non-English preferring. We did not observe statistically significant disparities in the rate of appropriate INR monitoring by race/ethnicity or language; the primary source of variation was by healthcare network. Older age, female gender, and uninsured patients had a slightly higher rate of appropriate INR monitoring, but differences were not clinically significant. CONCLUSIONS: We did not find a race/ethnicity nor language disparity in INR monitoring; safety-net site was the main source of variation.
Assuntos
Etnicidade , Varfarina , Adolescente , Estudos Transversais , Feminino , Humanos , Coeficiente Internacional Normatizado , Idioma , Masculino , Varfarina/efeitos adversosRESUMO
Future electronics will take on more important roles in people's lives. They need to allow more intimate contact with human beings to enable advanced health monitoring, disease detection, medical therapies, and human-machine interfacing. However, current electronics are rigid, nondegradable and cannot self-repair, while the human body is soft, dynamic, stretchable, biodegradable, and self-healing. Therefore, it is critical to develop a new class of electronic materials that incorporate skinlike properties, including stretchability for conformable integration, minimal discomfort and suppressed invasive reactions; self-healing for long-term durability under harsh mechanical conditions; and biodegradability for reducing environmental impact and obviating the need for secondary device removal for medical implants. These demands have fueled the development of a new generation of electronic materials, primarily composed of polymers and polymer composites with both high electrical performance and skinlike properties, and consequently led to a new paradigm of electronics, termed "skin-inspired electronics". This Account covers recent important advances in skin-inspired electronics, from basic material developments to device components and proof-of-concept demonstrations for integrated bioelectronics applications. To date, stretchability has been the most prominent focus in this field. In contrast to strain-engineering approaches that extrinsically impart stretchability into inorganic electronics, intrinsically stretchable materials provide a direct route to achieve higher mechanical robustness, higher device density, and scalable fabrication. The key is the introduction of strain-dissipation mechanisms into the material design, which has been realized through molecular engineering (e.g., soft molecular segments, dynamic bonds) and physical engineering (e.g., nanoconfinement effect, geometric design). The material design concepts have led to the successful demonstrations of stretchable conductors, semiconductors, and dielectrics without sacrificing their electrical performance. Employing such materials, innovative device design coupled with fabrication method development has enabled stretchable sensors and displays as input/output components and large-scale transistor arrays for circuits and active matrixes. Strategies to incorporate self-healing into electronic materials are the second focus of this Account. To date, dynamic intermolecular interactions have been the most effective approach for imparting self-healing properties onto polymeric electronic materials, which have been utilized to fabricate self-healing sensors and actuators. Moreover, biodegradability has emerged as an important feature in skin-inspired electronics. The incorporation of degradable moieties along the polymer backbone allows for degradable conducting polymers and the use of bioderived materials has led to the demonstration of biodegradable functional devices, such as sensors and transistors. Finally, we highlight examples of skin-inspired electronics for three major applications: prosthetic e-skins, wearable electronics, and implantable electronics.
Assuntos
Eletrônica Médica/instrumentação , Polímeros/química , Plásticos Biodegradáveis/química , Humanos , Fenômenos Mecânicos , Próteses e Implantes , Transistores Eletrônicos , Dispositivos Eletrônicos VestíveisRESUMO
With the aim to achieve rapid and efficient topochemical polymerizations in the solid state, via solution-based processing of thin films, we report the integration of a diphenyldiacetylene monomer and a poly(styrene-b-acrylic acid) block copolymer template for the generation of supramolecular architectural photopolymerizable materials. This strategy takes advantage of non-covalent interactions to template a topochemical photopolymerization that yields a polydiphenyldiacetylene (PDPDA) derivative. In thin films, it was found that hierarchical self-assembly of the diacetylene monomers by microphase segregation of the block copolymer template enhances the topochemical photopolymerization, which is complete within a 20 s exposure to UV light. Moreover, UV-active cross-linkable groups were incorporated within the block copolymer template to create micropatterns of PDPDA by photolithography, in the same step as the polymerization reaction. The materials design and processing may find potential uses in the microfabrication of sensors and other important areas that benefit from solution-based processing of flexible conjugated materials.
Assuntos
Acetileno/química , Acrilatos/química , Compostos de Bifenilo/síntese química , Polimerização , Poliestirenos/química , Poli-Inos/síntese química , Compostos de Bifenilo/química , Processos Fotoquímicos , Poli-Inos/química , Raios UltravioletaRESUMO
BACKGROUND: Understanding the patient journey is important to optimize care for patients with atopic dermatitis (AD) and overcome challenges in diagnosis and management. OBJECTIVE: To explore patient and caregiver perspectives regarding their experience with AD. METHODS: Patients and caregivers of patients with AD completed a pre-meeting survey and were invited to join an advisory board meeting in their country (China, Hong Kong, Ireland, Japan and Lebanon) to discuss the survey results. Data were analyzed descriptively. RESULTS: The survey included 31 participants (patients and caregivers) from Hong Kong (n = 7), China (n = 7), Ireland (n = 6), Japan (n = 6) and Lebanon (n = 5). The most challenging factors in the AD journey were management of symptoms before a confirmed diagnosis (68%), sudden recurrence of flares or worsening of symptoms (68%) and lifestyle changes (52%). In terms of overall AD management, 35% of participants indicated that AD was managed well, 23% had a clear treatment plan and 19% were generally satisfied with disease management. A collaborative relationship with healthcare professionals was favored. CONCLUSION: A holistic assessment of AD includes understanding patient and caregiver preferences, needs, experiences and disease perceptions. Addressing the identified gaps may improve the management of AD.
Assuntos
Cuidadores , Dermatite Atópica , Humanos , Dermatite Atópica/terapia , Estilo de Vida , Inquéritos e Questionários , Pessoal de SaúdeRESUMO
PURPOSE: Prior studies explored factors influencing dental study choice, but shifts from BDSc to DDS degrees in some countries impact demographics and motivations, potentially affecting the dental workforce. The aim of this study was to establish Australian DDS and BOH students' sociodemographics and career motivations. METHODS: Questionnaires conducted in mid-2019 assessed sociodemographic profiles and career motivations. Statistical analysis utilized descriptive statistics and Fisher's exact test. RESULTS: The overall response rate was 71.3%. DDS students had an average age of 25.2 years, while BOH students averaged 21.5 years. Most BOH (80.7%) and DDS students (52.0%) were female. They were mainly single, local, Australian citizens from metropolitan areas. Self-motivation ranked highest, particularly for DDS students (P < 0.05). Significant motivators included healthcare occupation, helping others, interesting career, and flexible hours (P < 0.05). DDS students were more motivated by flexible hours and independence (P < 0.05), while females emphasized a healthcare profession (P = 0.003). International students were motivated by being their own boss (P = 0.003), and private school graduates valued lifestyle within the profession (P = 0.049). CONCLUSION: Despite sociodemographic changes, the main motivations for studying dentistry remain consistent. DDS students prioritized lifestyle factors such as time and remuneration over BOH students.
Assuntos
Motivação , Estudantes de Odontologia , Humanos , Feminino , Adulto , Masculino , Escolha da Profissão , Austrália , Ocupações , Inquéritos e QuestionáriosRESUMO
BACKGROUND: The ALLEGRO phase 2a and 2b/3 studies demonstrated that ritlecitinib, an oral JAK3/TEC family kinase inhibitor, is efficacious at doses of ≥ 30 mg in patients aged ≥ 12 years with alopecia areata (AA). OBJECTIVE: The objective of this study was to evaluate the safety of ritlecitinib in an integrated analysis of four studies in AA. METHODS: Two cohorts were analyzed: a placebo-controlled and an all-exposure cohort. Proportions and study size-adjusted incidence rates (IRs) of adverse events (AEs) of interest and laboratory abnormalities are reported. RESULTS: In the placebo-controlled cohort (n = 881; median exposure: 169 days), the proportion of ritlecitinib-treated patients with AEs was 70.2-75.4% across doses versus 69.5% in the placebo group; serious AEs occurred in 0-3.2% versus 1.9% for the placebo. A total of 19 patients permanently discontinued due to AEs (5 while receiving the placebo). In the all-exposure cohort (n = 1294), median ritlecitinib exposure was 624 days [2091.7 total patient-years (PY)]. AEs were reported in 1094 patients (84.5%) and serious AEs in 57 (4.4%); 78 (6.0%) permanently discontinued due to AEs. The most common AEs were headache (17.7%; 11.9/100 PY), severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) positive test (15.5%; 9.8/100 PY), and nasopharyngitis (12.4%; 8.2/100 PY). There were two deaths (breast cancer and acute respiratory failure/cardiorespiratory arrest). Proportions (IRs) were < 0.1% (0.05/100 PY) for opportunistic infections, 1.5% (0.9/100 PY) for herpes zoster, 0.5% (0.3/100 PY) for malignancies (excluding nonmelanoma skin cancer), and 0.2% (0.1/100 PY) for major adverse cardiovascular events. CONCLUSIONS: Ritlecitinib is well tolerated with an acceptable safety profile up to 24 months in patients aged ≥ 12 years with AA (video abstract and graphical plain language summary available). TRIAL REGISTRIES: ClinicalTrials.gov: NCT02974868 (date of registration: 11/29/2016), NCT04517864 (08/18/2020), NCT03732807 (11/07/2018), and NCT04006457 (07/05/2019).
Assuntos
Alopecia em Áreas , Antineoplásicos , Triptaminas , Humanos , Alopecia em Áreas/tratamento farmacológico , Alopecia em Áreas/epidemiologia , Carbazóis , Janus Quinase 3 , Inibidores de Proteínas Quinases/efeitos adversos , SARS-CoV-2 , Resultado do TratamentoRESUMO
BACKGROUND: Adenosine triphosphate (ATP) is used as an intracellular energy source by all living organisms. It plays a central role in the respiration and metabolism, and is the most important energy supplier in many enzymatic reactions. Its critical role as the energy storage molecule makes it extremely valuable to all cells. RESULTS: We report here the detection of extracellular ATP in the cultures of a variety of bacterial species. The levels of the extracellular ATP in bacterial cultures peaked around the end of the log phase and decreased in the stationary phase of growth. Extracellular ATP levels were dependent on the cellular respiration as bacterial mutants lacking cytochrome bo oxidase displayed lower extracellular ATP levels. We have also shown that Escherichia coli (E. coli) and Salmonella actively depleted extracellular ATP and an ATP supplement in culture media enhanced the stationary survival of E. coli and Salmonella. In addition to E. coli and Salmonella the presence of the extracellular ATP was observed in a variety of bacterial species that contain human pathogens such as Acinetobacter, Pseudomonas, Klebsiella and Staphylococcus. CONCLUSION: Our results indicate that extracellular ATP is produced by many bacterial species during growth and extracellular ATP may serve a role in the bacterial physiology.
Assuntos
Trifosfato de Adenosina/metabolismo , Enterobacteriaceae/crescimento & desenvolvimento , Pseudomonas/crescimento & desenvolvimento , Staphylococcus/crescimento & desenvolvimento , Enterobacteriaceae/metabolismo , Viabilidade Microbiana/efeitos dos fármacos , Pseudomonas/metabolismo , Staphylococcus/metabolismoRESUMO
We present the case of a 50-year-old woman with stage IV invasive ER+/PR-/HER2-ductal breast carcinoma who was admitted to the intensive care unit (ICU) with obstructive shock and hypoxic respiratory failure due to pulmonary tumor thrombotic microangiopathy (PTTM), which significantly improved with chemotherapy. Upon presentation, her heart rate was 145 beats/min, her blood pressure was 86/47 mmHg, her respiratory rate was 25 breaths/min, and her oxygen saturation was 80% in room air. She underwent a broad non-diagnostic infectious evaluation, received fluid resuscitation, and was placed on broad-spectrum antibiotics. Transthoracic echocardiography showed evidence of severe pulmonary hypertension with a pulmonary arterial systolic pressure (PASP) of 77 mmHg. She initially required oxygen via a high-flow nasal cannula (HFNC) at 40 liters/minute and 80% FiO2 and was subsequently placed on inhaled nitric oxide (iNO) at 40 parts per million (PPM) as well as norepinephrine and vasopressin drips for acute decompensated right heart failure. Despite her poor performance status, she was started on chemotherapy with carboplatin and gemcitabine. Over the ensuing week, she was weaned off supplemental oxygen, vasoactive agents, and iNO and discharged home. Repeat echocardiography performed 10 days after the initiation of chemotherapy demonstrated marked improvement in her pulmonary hypertension with a PASP of 34 mmHg. This case highlights the potential role of chemotherapy in altering the course of PTTM in select patients with metastatic breast cancer.
RESUMO
A 66-year-old male with a history of low back pain was found to have discitis and osteomyelitis. Biopsy and PCR testing revealed Streptococcus cristatus infection. This bacteria does not typically cause disease, and only a few cases in the literature have reported it to cause infection in the bones or joints. This case illustrates that vertebral osteomyelitis with a rare causative agent, S. cristatus, is possible and can be identified with PCR. Treatment typically requires long-term antibiotics tailored to the causative agent for a minimum of 6 weeks and can sometimes include surgical management.
RESUMO
INTRODUCTION: Ritlecitinib demonstrated efficacy in patients with alopecia areata (AA) in the ALLEGRO phase 2b/3 study (NCT03732807). However, hair loss presentation may vary based on location (e.g., scalp, eyebrow/eyelash, body). Here, we sought to identify distinct hair loss profiles at baseline and evaluate whether they affected the efficacy of ritlecitinib. METHODS: Patients with AA aged ≥ 12 years with ≥ 50% scalp hair loss were randomized to daily ritlecitinib 10 mg (assessed for dose ranging only), 30 or 50 mg (± 4-week, 200-mg loading dose), or placebo for 24 weeks. Latent class analysis (LCA) identified hair loss profiles based on four baseline measurements: clinician-reported extent of scalp (Severity of Alopecia Tool score), eyebrow hair loss, eyelash hair loss, and patient-reported body hair loss. Logistic regression evaluated ritlecitinib (50 and 30 mg) efficacy vs placebo using Patient Global Impression of Change (PGI-C) and Patient Satisfaction with Hair Growth (P-Sat; amount, quality, and overall satisfaction) responses at Week 24, adjusting for key covariates, including latent class membership. RESULTS: LCA identified five latent classes: (1) primarily non-alopecia totalis (AT; complete loss of scalp hair); (2) non-AT with moderate non-scalp involvement; (3) extensive scalp, eyebrow, and eyelash involvement; (4) AT with moderate non-scalp involvement; and (5) primarily alopecia universalis (complete scalp, face, and body hair loss). Adjusting for latent class membership, patients receiving ritlecitinib 30 or 50 mg were significantly more likely to achieve PGI-C response (30 mg: odds ratio, 8.62 [95% confidence interval, 4.42-18.08]; 50 mg: 12.29 [6.29-25.85]) and P-Sat quality of hair regrowth (30 mg: 6.71 [3.53-13.51]; 50 mg: 8.17 [4.30-16.46]) vs placebo at Week 24. Results were similar for P-Sat overall satisfaction and amount of hair regrowth. CONCLUSION: Distinct and clinically relevant hair loss profiles were identified in ALLEGRO-2b/3 participants. Ritlecitinib was efficacious compared with placebo, independent of hair loss profile at baseline. TRIAL REGISTRATION: ClinicalTrials.gov identifier, NCT03732807.
RESUMO
Understanding biological systems and mimicking their functions require electronic tools that can interact with biological tissues with matched softness. These tools involve biointerfacing materials that should concurrently match the softness of biological tissue and exhibit suitable electrical conductivities for recording and reading bioelectronic signals. However, commonly employed intrinsically soft and stretchable materials usually contain solvents that limit stability for long-term use or possess low electronic conductivity. To date, an ultrasoft (i.e., Young's modulus <30 kPa), conductive, and solvent-free elastomer does not exist. Additionally, integrating such ultrasoft and conductive materials into electronic devices is poorly explored. This article reports a solvent-free, ultrasoft and conductive PDMS bottlebrush elastomer (BBE) composite with single-wall carbon nanotubes (SWCNTs) as conductive fillers. The conductive SWCNT/BBE with a filler concentration of 0.4 - 0.6 wt% reveals an ultralow Young's modulus (<11 kPa) and satisfactory conductivity (>2 S/m) as well as adhesion property. Furthermore, we fabricate ultrasoft electronics based on laser cutting and 3D printing of conductive and non-conductive BBEs and demonstrate their potential applications in wearable sensing, soft robotics, and electrophysiological recording.
Assuntos
Elastômeros , Nanotubos de Carbono , Eletrônica , Módulo de Elasticidade , Condutividade ElétricaRESUMO
Alopecia areata (AA) is an autoimmune disease with a complex pathophysiology resulting in nonscarring hair loss in genetically susceptible individuals. We aim to provide health care decision makers an overview of the pathophysiology of AA, its causes and diagnosis, disease burden, costs, comorbidities, and information on current and emerging treatment options to help inform payer benefit design and prior authorization decisions. Literature searches for AA were conducted using PubMed between 2016 and 2022 inclusive, using search terms covering the causes and diagnosis of AA, pathophysiology, comorbidities, disease management, costs, and impact on quality of life (QoL). AA is a polygenic autoimmune disease that significantly impacts QoL. Patients with AA face economic burden and an increased prevalence of psychiatric disease, as well as numerous systemic comorbidities. AA is predominantly treated using corticosteroids, systemic immunosuppressants, and topical immunotherapy. Currently, there are limited data to reliably inform effective treatment decisions, particularly for patients with extensive disease. However, several novel therapies that specifically target the immunopathology of AA have emerged, including Janus kinase (JAK) 1/2 inhibitors such as baricitinib and deuruxolitinib, and the JAK3/tyrosine kinase expressed in hepatocellular carcinoma (TEC) family kinase inhibitor ritlecitinib. To support disease management, a disease severity classification tool, the Alopecia Areata Severity Scale, was recently developed that evaluates patients with AA holistically (extent of hair loss and other factors). AA is an autoimmune disease often associated with comorbidities and poor QoL, which poses a significant economic burden for payers and patients. Better treatments are needed for patients, and JAK inhibitors, among other approaches, may address this tremendous unmet medical need. DISCLOSURES: Dr King reports seats on advisory boards for and/or is a consultant and/or clinical trial investigator for AbbVie, Aclaris Therapeutics Inc, AltruBio Inc, Almirall, Arena Pharmaceuticals, Bioniz Therapeutics, Bristol Meyers Squibb, Concert Pharmaceuticals Inc, Dermavant Sciences Inc, Eli Lilly and Company, Equillium, Incyte Corp, Janssen Pharmaceuticals, LEO Pharma, Otsuka/Visterra Inc, Pfizer, Regeneron, Sanofi Genzyme, TWi Biotechnology Inc, and Viela Bio; and speakers bureaus for AbbVie, Incyte, LEO Pharma, Pfizer, Regeneron, and Sanofi Genzyme. Pezalla is a paid consultant to Pfizer for market access and payer strategy concerns; Fung, Tran, Bourret, Takiya, Peeples-Lamirande, and Napatalung are employees of Pfizer and hold stock in Pfizer. This article was funded by Pfizer.
Assuntos
Alopecia em Áreas , Inibidores de Janus Quinases , Humanos , Estados Unidos/epidemiologia , Alopecia em Áreas/tratamento farmacológico , Alopecia em Áreas/epidemiologia , Qualidade de Vida , Programas de Assistência Gerenciada , Inibidores de Janus Quinases/uso terapêutico , Inibidores de Proteínas Quinases/uso terapêutico , Efeitos Psicossociais da Doença , Preparações FarmacêuticasRESUMO
N-Substituted glycines (peptoids) are a class of peptidomimetic molecules used as materials for health, environmental, and drug delivery applications. Automated solid-phase synthesis is the most widely used approach for preparing polypeptoids, with a range of published protocols and modifications for selected synthetic targets. Simultaneously, emerging solution-phase syntheses are being leveraged to overcome limitations in solid-phase synthesis and access high-molecular weight polypeptoids. This Perspective aims to outline strategies for the optimization of both solid- and solution-phase synthesis, provide technical considerations for robotic synthesizers, and offer an outlook on advances in synthetic methodologies. The solid-phase synthesis sections explore steps for protocol optimization, accessing complex side chains, and adaptation to robotic synthesizers; the sections on solution-phase synthesis cover the selection of initiators, side chain compatibility, and strategies for controlling polymerization efficiency and scale. This text acts as a "field guide" for researchers aiming to leverage the flexibility and adaptability of peptoids in their research.
RESUMO
Two-dimensional nanomaterials play a critical role in biology (e.g., lipid bilayers) and electronics (e.g., graphene) but are difficult to directly synthesize with a high level of precision. Peptoid nanosheet bilayers are a versatile synthetic platform for constructing multifunctional, precisely ordered two-dimensional nanostructures. Here we show that nanosheet formation occurs through an unusual monolayer intermediate at the air-water interface. Lateral compression of a self-assembled peptoid monolayer beyond a critical collapse pressure results in the irreversible production of nanosheets. An unusual thermodynamic cycle is employed on a preparative scale, where mechanical energy is used to buckle an intermediate monolayer into a more stable nanosheet. Detailed physical studies of the monolayer-compression mechanism revealed a simple preparative technique to produce nanosheets in 95% overall yield by cyclical monolayer compressions in a rotating closed vial. Compression of monolayers into stable, free-floating products may be a general and preparative approach to access 2D nanomaterials.
Assuntos
Nanoestruturas/química , Peptoides/química , Ar , Modelos Moleculares , Nanoestruturas/ultraestrutura , Nanotecnologia/métodos , Termodinâmica , Água/químicaRESUMO
Through advances in molecular design, understanding of processing parameters, and development of non-traditional device fabrication techniques, the field of wearable and implantable skin-inspired devices is rapidly growing interest in the consumer market. Like previous technological advances, economic growth and efficiency is anticipated, as these devices will enable an augmented level of interaction between humans and the environment. However, the parallel growing electronic waste that is yet to be addressed has already left an adverse impact on the environment and human health. Looking forward, it is imperative to develop both human- and environmentally-friendly electronics, which are contingent on emerging recyclable, biodegradable, and biocompatible polymer technologies. This review provides definitions for recyclable, biodegradable, and biocompatible polymers based on reported literature, an overview of the analytical techniques used to characterize mechanical and chemical property changes, and standard policies for real-life applications. Then, various strategies in designing the next-generation of polymers to be recyclable, biodegradable, or biocompatible with enhanced functionalities relative to traditional or commercial polymers are discussed. Finally, electronics that exhibit an element of recyclability, biodegradability, or biocompatibility with new molecular design are highlighted with the anticipation of integrating emerging polymer chemistries into future electronic devices.